Filter -Different texts in left and right section in user help ( F4 )
Hi Friends,
When I try to filter values in Analyzer, different texts are shown in user help for selectable (left window section) and selected (right window section).
In leftsection texts are shown as defined eg, text short , but sfter selecting the value, on the right section text long is displayed.
Example:
If a characteristic Z_IO1 with key 1234,
text short T1
mid.text T123
text long T123456
Now I try to filter:
selectable value is shown as
1234 T1 (setting key and text short)
and after moving it to the right side with blue arrow it changes to
1234 T123456 (same settings) if text long doesn't exist text mid. is shown.
Did smomeone face this Issue or has any idea? Then let me know, please.
And something different is strange : When I try to restrict in BEx Query Designer, system works as expected,
display in left and right section of filter window don't differ.
Thanks in advance for your input.
Best Regards
Joe
Hi Venkat
Thanks for reply. My problem isn't filter value selection controlled by rea mode, it's just the display of the filter value texts (descriptions) in the F$ window for selected items. For me it seems, that it is not to change, default is set. I.e. the longest text available is displayed (according to property in RSD1) without any dependence on required texts (short, medium, ling), as mentioned in my example.
Regards
Joe
Similar Messages
-
How to add two different background images - left and right
I want to get something like this
The way I have done that is to create the right image as a full width image and then place the left hand image over top and stretch the image to the left hand side of the page.
Use background images on boxes instead of page background. I have done something similiar in the header of this site:
http://www.signalpointdining.ca -
Display resolution is different left and right sides
Hi, my HP G42 laptop now has a different display resolution on the left and right sides. The left half seems to have less resolution than the right side, the right side looks like it's in HD, the left side looks washed out. I'm not sure if it is a hardware issue or a setting/software issue. The first time it appeared was after a windows 7 update was completed and installed, I'm not sure if that was just a coincidence. Any suggestions would be greatly appreciated. It works but is very annoying to look at.
Thank you,
RayHi Ray_M,
Welcome to the HP Forums! I see that you are having a problem with two different resolutions on each half of your screen. The easiest way to determine where the problem lies is to connect it to an external monitor. If the image is normal then we know it is an issue with the display screen but if the issue occurs on the external monitor then we know it is a problem with the drivers or the video card itself.
What is the product number for your g42? There are a number of different models in that series.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Remap Left and Right Command Keys as Different Buttons?
Hello,
I'm suffering from the dreaded emacs pinky (yes, I've already changed the caps-lock key to ctrl) and I want to know if it is possible to set the left and right command keys to different options.
For example, to keep the right command key as command, but have the left function as ctrl.
Thanks for any help.I think the answer is the same as last year. Don't know of any way to do that.
Captfred -
I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the master, and I cannot get the margins to alternate at print time. The larger margin is always on the left. Can anyone please help me on this, as I have spent hours and lots of ink.
Set up as facing pages with a larger inside margin.
-
I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?
All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
[Edit: It should be FF 3.5. I mistyped FF 3.15]
I have MAC OSX Snow Leopard. 10.6.8.
FF 3.5 [apologies; I mistyped 3.15] worked perfect with Snow Leopard. NO problems.
But '''everything''' after that, till FF 8, crashes left and right.
Facebook crashes the most within few short seconds.
And NO different language websites even open.
I read online to use Safe Mode and try. I did. No change.
I read online to reset font cache or or something using atsUtil from the Terminal. I did. Nothing.
It is super frustrating. Same problem in my wife's Mac as well.
Should I stop using FF? I heard Chrome is good.
Try any of these news paper sites:
www.prothom-alo.com
www.dailyjanakantha.com
www.Facebook.com
Even ESPN videos quit randomly. But YouTube videos are fine!
Potheek Aami.All your add-ons and plugins are up to date?
There has been a recent bug with Apples Java update:
https://bugzilla.mozilla.org/show_bug.cgi?id=700835
I have similar issues, although most of the time the browser only freezes for a short time. -
I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
DetlefYou don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
1) There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
1) Record the audio just the way you have it. Two different recordings, one on each channel.
2) Copy the audio recording to a new name and open it in your editor.
3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
4) Repeat, only copy/pasting the right track into the left track and save the second recording. -
Justify left and right margins of text
Is there any way to justify both left and right margins of text in the P Pro CS5.5 titler?
TIAColin,
That is correct. I would guess that it was added about PS ver. 4.0, when Text went from Raster to Vector, while working in the Image. The Paragraph Palette controls Justification.
Jay,
Thanks for the Feature Request. While I seldom alter Justification in Titler, there are some other aspects from PS (and AI and InDesign), that would be useful, such as full Alignment. I keep requesting that, plus some others (Spell Check would be nice, but even PS does not offer that... ), but so far, Adobe has either not been able to adapt Titler, or there have just been too few requests. As Adobe has added concentration on PrPro, it might well be that more requested features will begin showing up. Here's hoping.
Good luck,
Hunt
PS - for major Title work, I usually just go to AI, and then PS (or maybe only PS) to create them as PSD's. Titler is quite good, and so very useful, but when I want/need more, I just fire up another Adobe program. -
I get a blue line that runs left and right only on the games section, what is that?
I got a blue line that runs left and right & viceversa when I m on the games, can somebody help me? I don't know if that is a virus....I never got one so I don't know...
You do not have a virus. It sounds like you have turned on Switch Control, which can be turned back off in Settings > General > Accessibility. You probably have the Accessibility Shortcut feature turned on, causing a triple-click on the home button to activate or deactivate that feature. You can disable that shortcut in the same Accessibility settings.
-
How to send left and right of stereo sources to different targets?
Hi
Suppose I have an instrument track or audio track in stereo, and I want to send the left side of it to one bus and the right side to another bus, is there an easy way of doing this without creating two duplicate tracks (and panning one hard left and the other hard right)?
Similarly, suppose I have routed a track into a bus which contains an effect, a phaser for example, which is in stereo, and I want to put a delay on just the right and side but not on the other. Is there an easy way of doing this (without for example routing the output of the phaser bus to two separate busses and panning them hard left and right and then routing the right bus to another bus which contains the delay)?
Thanks if anybody has any suggestions, I'm playing around with this sort of stuff at the moment but its gettings too spaghetti. Am I being daft and the ability is there I just haven't found it in the manual?Well, I did just what you´re asking about the other day. In order to process a stereomix with MS technique, I needed to send the left channel to bus 1, the right to bus 2. So I turned off Universal Track Mode. This enabled me to route the output to Bus 1-2 instead of Output 1-2.
I believe this should work for you, too. It´s a bit fiddly, and you mustn´t forget to turn Universal Track Mode back on if you continue with another project. Otherwise things might get very complicated indeed.
/j
Message was edited by: juhani h. -
Left and right key press going to different markers
Hello there does anyone know exactly how to set the key press
of the left and right arrow keys on the key board so when i press
the left key it goes back a marker and when pressing the right key
it goes to the next marker. I am fairly new to lingo so any help
would be great and as simple as possible thanksHi,
I've created a slide show type application where arrow keys
as well as PageUp and
PageDown were used to move forward and back. Forward and Back
were not always
'previous' or 'next' markers. So, I created buttons on the
stage that acted as
forward and back, and each button had the regular mouseUp
event with the link to
the suitable location. I actually put the buttons off stage
and in a movie script
at:
on keyDown
case the keyCode of
121 : sendSprite (10, #mouseUp) -- pageUp
116 : sendSprite (11, #mouseUp) -- pageDown
end case
end
Using the 'sendSprite', when the user pressed a key, I could
activate the behavior
attached to the related navigation sprite. And, I could
easily add or remove key
controls by changing the movie script.
I have more info on using sendSprite, sendAllSprites and call
commands at::
http://www.deansdirectortutorials.com/Lingo/sendSprite.htm
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.deansdirectortutorials.com/
http://www.multimediacreative.com.au
email: [email protected] -
Why after i update my left and right arrow keys stop working
my left and right arrow keys stoped working after i updated to Mavericks now the dont work
Hello ccombs2014,
It sounds like 2 of your keys are not working after updating to Mavericks. I found this section of an article for you to help troubleshoot this issue named:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thank you for using Apple Support Communities.
All the best,
Sterling -
Touchpad left and right clicks don't work on Yoga 2 pro
Hi,
I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?Hello,
I've had a Yoga2 Pro now for six months or so. Just recently the left click stopped working correctly. What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click. Sometimes it works, sometimes it keeps stopping.
Now, the right click is malfunctioning as well. I press right click on something like an image, and nothing happens. I have to right click on something 2-10 times now for it to register that I'm right clicking.
Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which can)?
I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix. I'm hoping its not a hardware malfunction. I am running Win 8.1.
Thank you. -
I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar or contact an apple specialist through phone because of my work schedule and work load. I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
Phil
Maybe you are looking for
-
Should I create a new Apple ID for new device?
Hi, I just got a iPod Touch and I also own a iPhone. Should I create a new Apple ID for the iPod Touch or share with the existing one for the iPhone?
-
Problem with JComboBox in j2sdk 1.4.2_01
Hi, I've got a JComboBox, and I want to change its background color. I use this code: BasicComboBoxEditor editor = (BasicComboBoxEditor)myJComboBox.getEditor(); editor.getEditorComponent().setBackground(SystemColor.control); This code works with vers
-
Hi Need help with getting a count of different sums: Table: Stay Columns: Name, Nights each name can have multiple rows with different number of nights, now I have a select looking like this: select sum(nights),name from stay group by name The result
-
OVM 3.2.1 doesn't discover local disk
OVM 3.2.1 doesn't discover local disk on a SUN FIRE X4170 M3. I created 1TB lvdisk1, but OVM manager doesn't see it. Below is some output asked in similar situation in other threads: # vgdisplay --- Volume group --- VG Name DomUVol System ID Format l
-
Embedding fonts in AIR 2.7 for iOS
Hi, this may have been ask several times, but what is the exact / best way to use custom fonts in an iOS app? It seems, that by using a lot of textfields, the app is not running smooth anymore. Is there some magic way that will restore performance? A