Filter films by audio description availability

Is it possible to Filter films by whether audio description is available on them? (i'm in UK, so using UK store)
I cant seem to find out which films have it (very few it seems) and which dont?
Thanks for any help

Hi Chris,
Hardware acceleration on or off makes absolutely no difference, i recently tried watching videos in a 100% fresh install and new profile in firefox (no addons) and the problem still occurs albiet a little slower in the new install, ie it takes a little longer to drop out of synch.
There is a noticeable difference in framerate just before the problem occurs, like a very tiny hiccup, from that point on the audio gets left further and further behind, it's remedied by clicking back a few seconds on the video play bar but this is only temporary, lately i've even noticed it happening with live streams from the BBC, once again i must stress, this doesn't happen in Chrome or Opera or IE.

Similar Messages

  • No audio devices available in late-2013 iMac

    Updated Mavericks to 10.9.1 yesterday.
    Today there are no analog audio devices available for output.  Airplay devices work normally.
    I have reset PRAM, disconnected all peripherals etc.  Have tried connecting audio devices to the 3.5mm output jack.
    Any suggestions?
    Thanks in advance.

    This issue was resolved by re-installing 10.9 over 10.9.1.
    Think I'll wait for 10.9.2 until I update again.

  • Audio description on the Vbox

    Can the VBOX do audio description (That's audio description, not subtitles)
    How do I switch it on?
    Why do upgrades always come with a downgrade
    Solved!
    Go to Solution.

    BTVision> Settings> General Settings> Audio Description
    And there are options to set the level of the AD output
    It works well.
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • Audio description not working

    I seem to have the opposite problem to most people here, judging by previous posts. I want AD to work. Occasionally, when a programme is marked AD, there is no AD on it. Tonight is a case in point. Dirk Gently episode 3 on BBC4, no audio description. We know that it should be there because it has worked on the first two episodes. This is not the first time we have experienced this, so can someone explain why AD is sometimes simply not there when it should be.

    It seems I have a red light in my headphoneplug. It says that is an indication of the wrong driver installed on the system. But Windows have installed it automatically. Do someone have any idea?

  • E5 DAC/Amp Win8 error "There is no supported audio device available"

    I've just received my Sb E5, and installed the software package (while the E5 was connected and charging) without "apparent" problems. However, if I start the software it will report a problem with reading the device, and if I use the menu and select "audio device selection" it will immediately report"
    "There is no supported audio device available"
    If I disconnect, the software's volume indicator will max, and then if I reconnect USB the volume will return to ~15%.
    Please advise ...
    TIA

    Have you installed all of the drivers:
    http://www.msi.com/product/mb/Z77A-G45.html#/?div=Driver&os=Win7%2064
    I don't see anything about the Sound Blaster Cinema 
    http://www.msi.com/product/mb/Z77A-G45.html#/?div=Overview
    Did you mean the z87-g45 gaming? http://www.msi.com/product/mb/Z87-G45-GAMING.html

  • "No Audio Device Available" - Vi

    My uncle bought the external sound blaster assuming it would work with windows vista, since it says this on the box... however as it turns out the disc doesnt carry the correct drivers... anyway, i've downloaded and installed these onto his laptop, and they all appear in mmsys.cpl with the heading "working properly" ... however, when I try to open creative smart recorder i'm told there is no audio device available, and the creative diagnostic says that hardware has not been detected, despite the fact that it is plugged into a USB port and the power light on the SB box is on. Has anyone else had this problem and figured out how to solve it's I've tried different combinations of inputs and had no luck and am running out of ideas. Also, when I play cassettes from the hi-fi, plugged into the line in on the sound blaster, then plug headphones into the phones jack, there is no output from that either. Any possible help that can be offered is much appreciated?thanks - dan

    I've recently had the same trouble and still haven't solved it.
    I have the "li've 24" usb soundblaster which worked fine on my previous computer running on Windows XP home. When I connected it to a new PC using Vista 32 bits it "created" all manner of problems, all of which I eventually resolved apart from the inability to use the smart recorder. It gives an error message that it can't find a device, which is obviously stupid as everything else works. I have tried running this part of the application in Windows XP compatibility mode but it makes no difference. I have virtually given up trying unless someone out there knows of a solution. As things are, it's a real nuisance not having this facility.

  • Smart Recorder - Audigy 2 ZS - Win 7 - "no audio device available"

    LSmart Recorder - Audigy 2 ZS - Win 7 - "no audio device available"nI've got Windows 7 Ultimate 64 bit and a Creative Audigy 2 ZS. They've worked fine together, but I recently tried to install the programs that come on the CD and I can't get Smart Recorder to work.
    It has a message saying "There is no audio device available on the system. The application will now close."? I checked my control panel and it definitely shows a my Audigy 2.
    I found an old post that suggested using the CTZAPXX.EXE on the CD, but it didn't do anything. I watched the CPU go to 50% usage, but nothing happened for minutes. (http://forums.creative.com/t5/Sound-Blaster/Speaker-settings/m-p/40229)
    How can I fix this problem with Smart Recorder?
    Thanks,
    Mike

    Is it time to upgrade to X-Fi or another brand?

  • HT204370 My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

    My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

    Actually, try this instead. On the apple tv, under settings > Audio > Dolby digital
    Change it From AUTO (default) to ON
    That worked for me. All my eyetv encodes have stereo and 5.1 tracks. For some reason the auto option forces stereo. Setting it to ON forces the 5.1.
    Everything sounds nice again! It's just stupid that apple puts AUTO for the default and that setting results in stereo not 5.1.

  • "No supported audio device available" ?

    Win7, Creative board is: sound blaster X-FI Extreme Gamer.
    Creative Consule shows the subject message whenever i try to open it. The creative player would show the same message but i re-installed it and it works fine.
    Trying re-install the driver gives the old "device not found" message. In device manager there are no problem devices found. It shows the creative card and 2 High definition audio devices as "Working".
    These are the driver/programs I am presently running:
    CMPlyr5_PCAPP_LB_5_25_02.exe
    CSL_PCAPP_LB_2_6_09.exe
    DDL_PCAPP_LB__3_00_-6.exe
    DTS_PCAPP_LB__03_08.exe
    SBXF_PCDRV_LB_2_8_003.exe
    Under Sound (Playback) I have the Speakers, Creative SB-XFi set as the default.
    For recording I have Digital-In Creative SB-XFI as the default.
    The music/videos plays just fine using any player that i have.
    Problem is: No supported audio device available. How do i correct this and have a working console?
    thank you,
    savagcl

    I am no expert, but does it help by installing it with an admin account in windows?
    (As opposed to any non-admin user accounts.)

  • Turn Off Netflix/Apple TV Audio Description?

    When I began the new season of a show I was watching on Netflix, an audio description of the show suddenly started playing.  I have searched high and low trying to figure out if it was AppleTV, Netflix, my remote (Harmony), or my TV (a Sharp Aquos)  that suddenly decided I needed that feature.  So far, no luck. Does anyone have a solution?

    Hey you guys, Me too, It just happened to me right now, was trying to watch New Girl (can't live without Jess Day, but we all know this by now...) season two to be exact, and it started doing this annoying narrating thing, totally turns me off by the way (in a Schmidt voice) "we build this Schmidtty on tootsie roll"... Lol
    has anybody come up with a solution to this, or I'll just have to bare with it for the next two episodes... (I have watched all three seasons for the third time now) But still need it to be perfect every time I watch!!!! Thanks...

  • No description available on context help

    when i choos some controller and i click context help, the small window open with text "no description available" what's the problem?
    Attachments:
    screenshot.png ‏72 KB

    All that it means is you did not write the description and tip. It does not get written by itself. Did you even right click on a control and look at the options?

  • Color Adjust Filter and Paint Bucket not available in CS3

    I recently noticed that Colors in the Filter menu is not available in my install of Illustrator CS3. I also noticed that the Paint Bucket tool is missing. Both appear to be in the Plug-ins folder in their respective folders (Illustrator Filters and Tools) but are not available in the program. I am using Mac OS X version 10.4.11 on a PowerPC G4 running at 1.6 GHz with 1 GB of SDRAM. I have the Adobe Creative Suite 3 Web Premium package.
    There may be other problems with my install, but these are the two things I notices. Can anyone shed some light on why this is happening and how to fix it? I tried a re-install, but to no avail.

    Basically yes, but not quite. You may want to review the new features. The paint bucket was removed because it was, well, pointless in most cases. THe Live Paint tool is much more useful than the old Paint Bucket.

  • "Save all audio as" available in Audition CS5.5?

    Is the multi-track "Save all audio as" option in Audition 3.0 somewhere available in Audition CS5.5? -ed

    This has been moaned about before, and I'm afraid it isn't in this version. Pretty sure it will be back, though...

  • AE CC 2014 and Blackmagic Decklink AUDIO not available in preferences

    Hi
    I have a Decklink HD Extreme 3D+ installed in an Apple Mac Pro, 12-core, OSX 10.8.5.
    I also installed Desktop Video 10.1.2.
    In AE CC 2014 the card is available for VIDEO and works.
    But in the audio controls it DOES NOT APPEAR.
    Can you pleas help me?
    Thanks.
    Regards,
    Uli

    Hi Tim
    Attached I send you:
    OSX, Audio Midi Setup where the BM Outputs are available
    AE2014, Video Preview, where the BM card is available and working
    AE2014, Audio Hardware, where the BM outputs are missing
    AE2014, Audio Mapping, where the BM are missing as well, because they're not in Audio Hardware
    Thanks for your help
    Best regards,
    Uli

  • What free films and programmes are available with Select HD?

    I am happy with FIOS, but rather disappointed that many 'free movies' actually are 'free with subscription.' I don't want to click a film and find I'm charged - but what free movies are available to those with Select, where TCM, HDNet, and LMN are not part of our channel lineup?

    gloriana wrote:
    I am happy with FIOS, but rather disappointed that many 'free movies' actually are 'free with subscription.' I don't want to click a film and find I'm charged - but what free movies are available to those with Select, where TCM, HDNet, and LMN are not part of our channel lineup?
    Not many.  As a rule, if you don't have a channel in your package, the "free" movies aren't free.  You can check available channels at the following link if you haven't already. 
    http://www.verizon.com/home/fiostv/#channels

Maybe you are looking for

  • How to transfer one BP balance to another ?

    Hi All, I just  want to transfer balances of obe BP to another , howcan i do it ? Regards Ankur

  • Purchasing Vendor Evaluation

    Please help me by providing the business content datasources that provides me the bewlow information. From which extractor , I can get the vendor evaluation score based for Invoices .? the criteria we are concerned with for vendor evaluations are as

  • PR Creation and Change

    Dear All,                  I want to put a control in the Purchase requisition creation and change ME51N and ME52N any standard user exit  available for this?.. if available kindly send me the user exit name. We have already tried with the user Exit

  • HT4623 Stuck in recovery mode after update. What do I do?

    Stuck in recovery mode after update. What do I do? Tried holding both buttons and releasing after screen goes black. Returns to recovery screen.

  • Need to reinstall photoshop 8

    I need to have my initail installation of Photoshop 8 UNauthorized so I can reinstall following my computer cleanup.