Filter for batch determination of production order

Filter for batch determination of production order
Dear guru ,
We trigger batch determination manually for every production order using CO02.
How can I understand whose are the production orders arenu2019t taking place batch determination?
Checking all the production orders is too heavy ?
Does exist a massive transaction (coois or others) where I can select the production orders with components not assigned to the batch ?
Thanks in advance

Hi
In COOIS > In the initial screen select Documented Goods movement in the list Field along with and other selection criteria and run the Report
In the list of orders > Expand corresponding order to view Documented goods movements list with the components with and w/o batch numbers
Regards
Brahmaji

Similar Messages

Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order. Can you pl. tell me how to configure this scenario.
Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

Hi,
Automatic Batch Determination for production order components is possible by configuration.
You can also refer below discussions to map your scenario.
Batch determination in production order | SCN
Automatic Batch Determination in Production order
Regards,
Naresh

Automatic Batch Determination in Production order

Dear All,
We are using automatic batch determination is based on FIFO (first Mfg first out) for components..After releasing the order.
I have maintained Batch Class in all the materials which are used as a all material special Characteristic LOBM_HSDAT as a one of the class characteristic. as we want batch determination on GR date for few material and for few material LOBM_VFDAT for self life material and its class.
Then create Sort Rule CU70 mainatained the same LOBM_HSDAT in it. and one with LOBM_VFDAT.
Then create Batch serch Strategy (USE T.Code COB1- search strategy CO01the respective sort rule and selection critoria.for All ROH HALB and Finish material.
In Material Master of all component in MRP 2 view select value 3 (Automatic Batch Determination) for BATCH ENTRY. All ROH HALB and Finish material
After mainting above all prerequisite I should able to do the Automatic Batch Determination as per my selection Rule.
But Automatic Batch Determination in Production order after release is not working.
Please need your help.
Regards,
Manish
Edited by: manish gurnule on Dec 30, 2008 5:26 AM

Dear,
Define the batch determination search strategy for process order in COB1 with sort rule in CU70.
On the initial screen of your application choose Logistics>centrel function>batch management>Batch determination>For process order -->Batch search strategy --> Create.
On the initial screen of your application choose Batch search strategy -->Create.
Choose the strategy type, say choose co02
Choose the key combination-
Enter the required dat-->say plant ,production order type, product,valid from and component for which you want to have this
Choose Selection criteria push button. Choose a sort sequence.
If no values have been entered, enter the selection class and the characteristic values.
Go back to the screen on which you create a batch search strategy.
Choose Sort if required(it should be defined earlier(in CU70- here you are giving the charateristic name on which you want to sort)
For component you need to use MBC1 with search stratgey as ME01 for your plant movement type and material and assign the sort rule and search procedure here.
Check also in COR4, for the combination of plant and order type...you have selected search procedure-CO0001
Batch management> Batch serach procedure allocation and check activation
T.Code to be looked specifically OMCG , CORC
Hope it will help you.
Regards,
Madhu

Query on Batch Determination in Production Order

Dear Gurus
I have one query on batch determination in production order against the scenario given below, which need your help .
We know that it is possible to allocate the same component batch to two concurrent production orders at the same time in SAP. But as per the business requirement its not possible physically. So business want to update the batch selection logic to exclude the already allocated batch to any open production order.
In my understanding it cant be done without any enhancement, but require your expert opinion before coming to any conclusion.
If you have any idea to achieve the solution kindly let me know.
Thanks

Dear
I am not sure whether you can change the Batch SELECTION logic for concurrent production order .As far as I know batch selection is done on Batch search strategy /sort Rule
Explore SAP Help : http://help.sap.com/printdocu/corePrint46c/en/data/pdf/LOBM/LOBM.pdf
Refer this useful thead from expert :Userexit in Batch determination and external number ranges for batches
Regards
JH

Issue regarding Batch determination in Production order as per Expiry date.

Dear all,
first of all happy Navratri.
I have issue regarding batch determination in production order.
I have to compare P.O header materialu2019s expiry date and issuing components expiry date at the time of batch determination.
lets take example, Material having self life is u201CXu201D years and batch determination against PO is based on FEFO with the help of self life we can determine Expiry date of manufacturing material suppose it is u201CYu201D I have to introduce restriction at the time of good issue if expiry date of issuing components u201CZu201D is less than expiry date u201CYu201D.
Please give your valuable suggestions either standard or through SAP enhancements.
thanks & Regards
SIVA

Dear
Thanks for your reply, i am layman about batch derivation can u elaborate it.
Thanks & Regard

Batch determination in production order for a component

Hi All,
Is there any FM or BAPI which can determine batch for a component in production order and save it. I don't want to use call transaction method for CO02 as this determines batches for all components in production order during saving process

Hi,
Look at BAPI 'BAPI_MATERIAL_GETBATCHES'. This might help you.....
Here ia sample code:
CALL FUNCTION 'BAPI_MATERIAL_GETBATCHES'
EXPORTING
material = MATERIAL
BATCHNUMBER =
plant = PLANT
expirydatefrom = DATE
EXPIRYDATETO = 99991231
AVAILABLEDATEFROM =
AVAILABLEDATETO = 99991231
IMPORTING
RETURN =
TABLES
batches = it_batches.
Regards,
Raj.

Batch determination in production order automatically for component

Hi Experts
Please understand the scenario and conclude the results
Few of RM is having Batch management where Stock are lying into different production shop floor location XXXX and those RM is used into one production order of Finished Goods where System will not picking batch into production order , that we are putting by checking availability and than putting correct Shop floor Storage location and correct Batch in which stock is lying.
now the above activity i want to perform through automatic batch determination which will system pick by default in which stock is exist in shop floor location. please suggest me step by step procedures for the same. few idea i have but i need clear guidelines....
Thanks in advance..
Pankaj Agarwal

Pankaj,
You can define the production storage location in BOM component details under Status/Lng Text or in MRP2 production storage location so that system will do the reservation by default for this production storage location and also good issue will be from same storage location.
Against this reservation you can transfer the stock from stores to shopfloor.
Check below SAP note for more information
137225 - Prod. order: Issuing storage location for component
Br
KK

Batch determination in production order

Hi all,
Raw materiala are manged in batches and finished products are in serial numbers.
when I release the production order the batch is not determining automatically.
can any body expalin the SPRO settings for automatic determination of batch.
Thanks
Chindam

Hi,
Batch will not determeined at Production order release. only at the time of GR for Produ. order.
Regards
sam

Reset Batch Determination in Production Order

Dear PP experts,
I've done the batch determination for component in production order successfully.
My question is if it's possible to reset this batch determination ?
Can anybody tell me how to do it??
Thanks,
Helly

Hi,
In Pord order - comp overview , when you select the component and trigger batch determination , it will lead to the Batch determination screen - there you select Batch determination - Original situation .
This will reset the batch determination.
pls try.
Regards,
Sheik

Batch determination in Production orders

I am doing batch determination for one of the components in the Production order. We have 2 storage locations where the component is stored SLOC 1 and SLOC 2. When I do a batch determination on this component I want it to show batches from SLOC 1 first and then SLOC2. Currently it shows batches only from SLOC1 which is the issue location on the component screen in Production order.
thanks a bunch

Hello John,
You can maintain the withdrawel sequence (stock determination group) in customizing and same can be assigned to the material in the material master.
1) You can create stock determination group to plant in customizing.
2) Assign the stock determination rule to the order type in the customizing and also check batch determination check box. Also select operation for stcok determination rule to be cheked at batch determination (number 5)...Transaction OPJ2.
3) And assign the group to the material in the material master.
Acoording to the sequence defined your batched from the storage location will be displayed in the production order screen.
regards
TAJUDDIN

Batch management in production order for WM managed components

Hi Experts,
Iam having WM managed components in my production order which are batch managed as well. I have to do batch determination for these WM managed components.
I would like to know the steps involved in it and the required configuration.
Can anybody throw some light on this please
Thanks & Regards
Enrico

Enrico,
For setting up Batch determination in production order please follow
[Batch determination in production order|http://help.sap.com/saphelp_470/helpdata/en/25/283c3f4f7811d18a150000e816ae6e/frameset.htm]
http://help.sap.com/saphelp_470/helpdata/en/25/283c3f4f7811d18a150000e816ae6e/frameset.htm
As far as WM managed components it will still be the same as WM transfer order is created only after goods movement document is posted.
Hope this helps. Else please come back.
thanks,
Ram

Automatic capture of batch number as production order

Hi,
How to make the order number to capture automatically while confirming the production order.As it should pick the order by default in the goods movement screen.
Abap coding and user exit to perform this.
Regards,
Deepak GS

Hi,
Batch determination uses characteristic values assigned to batch classification for sorting batches and make a selection. A series of customization steps should be completed for batch determination. You will have to learn by reading SAP help or threads throughout this forum. Check out threads below.
[Batch Determination within Production Orders;
[Automatic Batch Determination;
narainmech wrote:
> But for GR it is ok, if this is required for the child item level , while doing the confirmation when the issue is happening in bith cases 1. BAckflush 2. Manual issue
>
> Here in both the case it should pick the batch automatically.
According to which criteria do you want batches to be selected, order name? Are there batches in the system named after production order for components of the order? No matter what, selection must be based on batch characteristics.
Regards.

Adding one more field in field catalog for batch determination

Hi,
I am configuring batch determination..I need to create condition table based on plant and material type... but material type field is not there in the field catalog...I need to add field MTART (Material Type) in the field catalog. can you please guide me how to do that...
Thanks
Kumar

Hi Kumar,
Go to SPRO---Batch Management---Batch Determination and Batch Check---Condition Tables--Define Production Order Condition Tables here select Conditions: Allowed Fields (Process Order) here first add the field MTART Material Type then it will be available Condition Table for Batch Determination.
Regards,
R.Brahmankar

User-Exits/Badis for T.Code Co01 Production Order

Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........

These are the available user exits..
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

Batch determination in Subcontracting order

Hi,
Can any one of you explain me the steps for doing batch determination for subcontracting orders. i am facing the same issue, but i dont know what steps to follow.
our scenario is: we do a GR against a Sub contracted PO using 101 mvt type and when i am trying to post the document, it's asking me to enter the batch for few components which are maintained as vendor consigned stock and in batches.
is it possible to automate the process? can any body explain how to setup the customization for batch determination?
thanks in advance,
Kanth

Follow the below steps.
01. For movement type 543 "O" assign your search procedure T code : OMCG
02. Maintain conditions record or strategy record.
A1) Normaly we use batch determination at delivery level, because at the time of order material may or may not be created.for this material should be configured with batch and batch determination should be checked in sales views of material.
A2) Batch Determination during order Creation.
For this you need to maintain a Classes d for you Material. Depending on the Manufacturing process you can define the characteristics for your material.
Ex: Purity for Medicines, Resistance for Electric Items.
You need to create a class (You might have to create a new class type) which incorporates the characteristic.
First Create the Characteristic Using Ct04 and then using Cl02 create the Class including this characteristic.
Then in your material master Classification View Enter this class.
Then Create a Batch for the particular plant and Stor Loc using MSC1N.Give the value of the characteristics in this batch.
Then go to SPRO ->Logistics General ->Batch Management and maintain the Condition Technique (Procedure, Strategy Types and assignment to sales docs etc).
Then Create the Batch Determination Record using VCH1.

Filter for batch determination of production order

Similar Messages

Maybe you are looking for