Filter for Super8 Film

Just had some Super8 film transferred to video and captured in FCP 5.0.4. Would like to use a video filter to spice up the footage. I was thinking of using the 3-way color corrector. Any suggestions? Thanks.

Would like to use a video filter to spice up the footage
Depends on what you mean by "spice up." Care to be more specific?
-DH

Similar Messages

Interactive report filter for date not working correctly

Hi,
I am having an interactive report. I tried to give a filter for a column(created_on) as created on>29-oct-2009 17:17
but i am getting the row containing created on as *29-oct-2009 17:17* in the report result. How can i correct this
problem
Thanks,
TJ

Hi,
I think it is because seconds.
So it is 29-oct-2009 17:17:00 and your record is e.g. 29-oct-2009 17:17:02
br, Jari
Edit
You can use trunc function in your select so that it round date to minutes
TRUNC(created_on,'MI') AS created_onBr, Jari
Edited by: jarola on Nov 5, 2009 3:02 PM

How to create one filter for N views in the same report

Hello everybody,
I need to have the same filter for diferent views that I have in the same report. Anyone knows how to do it?
Thanks in advance
Mario Mesquita

Hi,
In India site, you can create a SMTP connector which point to the local ISP.
Thanks.
Niko Cheng
TechNet Community Support

Set filter for only one column in tableview

Hi
i am using in MVC a htmlb:tableview with filter in only one column of 8.
This is all working fine, except that the user can enter a searchsting in the filterfield for all columns, but in handle_event (of the controller) ; i only react to a text in the filterfield of column 4 and ignore all other filtertext , which were maybe entered in the other columns.
My question:
how can i enter the filter only for one column, in a way that the user cannot enter any text in the filterfield of the other columns, only in column 4 ?
my view:
<htmlb:tableView id             = "requirements"
                 table          = "//model/pdst_reqs"
                 filter         = "APPLICATION"
                 keyColumn       = "EXTID"
                 iterator        = "<%=model%>"
                 footerVisible   = "FALSE"
                 encode          = "TRUE"
                 visibleRowCount = "<%=model->rowcount%>"
                 width           = "100%"/>
Best Regards
Britta

You can disbale the Filter for the particular column by setting the DISABLE_FILTER in the Iterator method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS. Here is the sample code
method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS .
CLEAR p_column_definitions.
CLEAR p_overwrites.
data tv_column TYPE TABLEVIEWCONTROL.
tv_column-COLUMNNAME          = 'FLDATE'.
tv_column-SORT                = 'X'.
tv_column-EDIT                = 'X'.
tv_column-ONCELLCLICK         = 'MyCellClick1'.
tv_column-title               = 'Date '.
APPEND tv_column TO p_column_definitions.
CLEAR tv_column.
tv_column-COLUMNNAME          = 'PRICE'.
tv_column-horizontalAlignment = 'right'.
tv_column-verticalAlignment   = 'middle'.
tv_column-ONCELLCLICK         = 'MyCellClick2'.
tv_column-title               = 'Currency'.
tv_column-EDIT                = 'X'.
tv_column-DISABLE_FILTER      = 'X'.    " <-------Like this
APPEND tv_column TO p_column_definitions.
endmethod.
Hope this will solve your problem.
Raja

Looking for a 58mm protective or UV filter for a Canon Macro using a Cannon MR-14EX Macro Ring Lite.

Looking for a 58mm protective or UV filter for a Canon Macro Lens EF using a Cannon MR-14EX Macro Ring Lite flash unit.
The lens has an external groove for the ring flash pawls, but filters I've found do not. The external diameter of the filters does not allow the ring flash pawls to reach the lens groove. I either need a filter with an external groove or one with no part larger diameter than the threads. Any ideas? Thanks, Tom

Which lens are you using? This adapter will work, so long as the front element doesn't rotate.
http://www.amazon.com/Canon-Macrolite-Adapter-Digital-Cameras/dp/B00006HRMH

Error while creating function filter for SAP R3 destination

Hi All,
I am using SAP Portal Add-in 1.0 Patch 3 for Visual Studio 2003 with SAP Portal Runtime 1.0 Patch 3 for Microsoft .NET and SAPDotNetConnector2.0.
Portal server is successfully added to my server explorer.SAP R3 system destination is also added succesfully ,but when i create a function filter
for my destination function to add my RFC enabled function module it gives me an error message "Missing R3NAME=... or ASHOST=... in connect_param in RfcOpenEx",but when i log into the R3 system from portal system ,I am able to log successfully.
please see the attached jpg file for your reference.
what should I do,plz help me.

3 things:
1. When you say "but when i log into the R3 system from portal system ,I am able to log successfully"... what do you mean exactly? Do you mean you tried to do a "test connection"?
2. Make sure the portal user mapping is set to "user & password" and not SSO. In order to work with the destination in design time you need to have it set to User and Password. Later, for run-time connection you can change it to SSO.
3. If number 2 failed, can you please click on the destination in the server explorer and look at the property grid for the connection string property? make sure it's correct (you can post it here if you don't know).
Regards,
Ofer

What is the best hp laserjet printer monochrome for transparent film ?

Hello.
I want to know what is the best laserjet printer monochrome for transparent film ?
Can you recommend a printer ? I want to print negative or positive films at high opacity
I wait your recommendation.
Thank you

high price:HP LaserJet Enterprise 500 color MFP M575dn This is the top of the line for consumer laser printing. It's technically an enterprise (fancy word for commercial) printer, and there for has a commercial warranty attached to it, which is a very good thing. This also has dual trays with automatic tray switching depending on the media type. That means you can keep the transparencies in one tray, and plain paper for everyday printing in the other without having to switch between the two manually. This printer also supports 1200 x 1200 dpi (dots per inch) which will give the transparencies a clear crisp look.
average price:HP LaserJet Pro 400 color MFP M475dn This is about the middle of the road laser printer. It's still technically an enterprise printer, so you get the enterprise level warranty, and you still get the dual trays with auto-switching. The main differences are in the price, and in the quality of prints. This printer is much cheaper, but the maximum dpi is 600 x 600 so the images that print are not quite as good as with the M575dn.
low price: HP LaserJet Pro 100 color MFP M175nw This is not the bottom of the line by any means, but it's not as fast at printing as the two above. You still get 600 x 600 dpi, but you loose the extra tray. You also loose the enterprise level warranty, but you do still get a 1 year consumer level warranty. It's not as flashy as the two above, but it will do the job.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Where can I find a 17" desktop anti-glare filter for my iMac?

I checked a couple of sites that sell anti-glare filters. I'm trying to find one to fit my widescreen 17" iMac, however, both sites charged exorbitant prices, one $80, another $100. I remember ten years ago I was able to buy an anti-glare filter for my old Windows PC, but for some reason, neither the Apple Store, nor Best Buy sell them today. I need one because for the second time in two years, I had to get new glasses as the glare from my iMac is hurting my eyesight.

As I said, I don't think the result from putting a filter over the glass will be satisfactory, regardless of cost.
You may want to find an external matte screen digital (DVI) LCD that you find comfortable to look at, and connect it to your iMac as a second display. Then set System Preferences Displays pane so that it is your primary display (with the menu bar and dock on it). Put that display in front of you, with the iMac off the right as the secondary display. You can still use it (as you desktop extension); hopefully the "glare" will be less of a problem if you are not staring at it constantly. You can go up to 1920x1200 resolution for an external digital display, which is a typical 23 or 24-inch (measured diagonally) widescreen LCD display. I use my iMac that way, with an external display (that I really like) as my primary display and the iMac to the right as the secondary display. Note: It's to the right because putting it to the left blocks the optical drive.
Alternately, if the iMac is in good shape, you can sell it and put the proceeds toward a new Mac mini, and get a display that is comfortable for you.

GRC AC Filter for System in GRC AC End user Home

Hi,
I need to create a filter for system (for all user) in the ALV, from END USER HOME when try to select roles and system from Model User
I see the instructions in the link:
http://scn.sap.com/community/grc/blog/2013/09/04/customizing-access-request-and-approval-screens-in-grc-access-control
But i try to open application GRAC_UIBB_END_USER_LOGIN from SE80 transacction, appears a error in the navigator.
This is what I want to accomplish

Hello Cristian,
Try to add the below string at the end of the URL for which you are getting error.
&SAP_CONFIG_MODE=X&OBJECT_ID=ACCREQ
Hope it helps.
Regards,
Neeraj Agarwal

How to install plugin and exta filter in photoshop cs ? and any special filter for special effects ?

how to install plugin and exta filter in photoshop cs ? and any special filter for special effects ?
kindly recommend me any best one and tel me step by step how i will add more plugins n filters

A Plug_in normally come with an installer or install instructions. Check the documentation for the plug-in you trying to install. It sounds like you don't know what plug-ins you want to install. In that case you don't need to install any. At some point you may read about a plug-in and what it can do and feel you have a need for it. Then you will have a reason to install a plug-in that is not installed by default. There may also be a cost involved most worthwhile plug-ins are not free.
Adobe Optional Plug_ins downloads are Plugins Adobe want to remove from Photoshop and no longer install by default. Also at some point in time these will no longer install into the current Photoshop for Adobe will remove feature or interfaces the use. For example the CS5 optional plugins will install in Windows CS6 perpetual version 13.0.1.3 but not in Subscription version 13.1.2 or perpetual Mac version 13.0.6 fot its 64bit only and the Mac CS5 optional plug-in for Picture package is only a 32bit plug-in.
You will need to keep and maintain old versions of Photoshop if Adobe remove features you use in new versions of Photoshop.

What is best filter for MacBook Pro

What is best filter for my son's MacBook Pro to block adult/**** sites while allowing access to most anything else. The parental control I set up has not been the answer. I constantly have to unlock sites for him. I would appreciate any suggestion.

If the options on the computer itself are not sufficient, you might try other options like OpenDNS Home, but it also involves a list that might need to be customized.
In the end, the best defense is passing down a strong set of values so that when your son does visit the "wrong" site (as he inevitably will, and increasingly so into adulthood) he at least has an innate knowledge that he shouldn't be there.

HT2729 How do I access a rented film to view it? I have been charged for the film but I cannot find it in iTunes; Help!

How do I access a rented film to view it via iTunes? I have had my account deducted for this film but cannot see how I get to it; Help!

Hello, jaimie299.
Thank you for visiting Apple Support Communities.
If the movie rental has completely downloaded, this movie should be located in your movie library under rental. Below, I have included a couple articles on how to check for interrupted downloads and movie rentals. I have also included and article that will allow you to report a problem with your purchase if you are still unable to watch the movie.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
iTunes 11 for Windows: Rent movies from the iTunes Store
http://support.apple.com/kb/PH12499
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Cheers,
Jason H.

Performing filter for field Tax Code (MWSKZ) in the Purchase Order

Hello Experts,
We have to perform a filter for field Tax Code in the purchase order (ME21N / ME22N / ME23N). We've tried to use SH SH_T007A and SSH_T007A with search help exit (e.g. F4_TAXCODE_USER_EXIT) but it is not working. The ABAP programmer has performed a debug and the standard does not check any line code in this function (the ABAP programmer has set a breakpoint into function F4_TAXCODE_USER_EXIT after assigning it for mentioned search helps)... it sounds like this program / search help is not called by standard program of ME2* transactions...
I've tried to look for some other object and other function called FI_F4_MWSKZ has been found... I've set a breakpoint there and when I open the search help for field tax code into transaction ME21N it works... but as I could see this function FI_F4_MWSKZ is a standard one which we can not change...
Have you ever had the same problem?
We are currently in the SAP 4.6C version. I've found lots of OSS notes but only valid for 6.0.
Maybe someone can help me on that.
Best regards,
Nilmar

hi,
goto gs01 transaction,give some name to ur step.
give the table name and field name.
then u can create a specific value set for that field.
save.
now u can use this set to define conditions for ur fields in obbh transaction.

How do you filter for photos with develop adjustments?

I wanted to put this information out there, because it was difficult for me to find an answer to the question of "how do you quickly filter for photos that have develop adjustments?"
Some earlier posts in this forum observe that a smart collection has the ability to filter files wherein "has adjustments" is "true." Yes, it can do that. And it can also add in a "date" parameter for more specific targeting. But it cannot simply say, "in the current folder," or "in the selected folder." And frankly, that's the exact situation when I need to filter down to the files I want: I'm in a folder—typically the current folder that I've just imported—and I've done a smattering of develop adjustments. Now, I want to quickly select just those images for export. Can't be done, not with a Smart Collection, anyway.
But Lightroom is nothing if not deep, and if you approach the problem from a filtering standpoint, it will eventually get you there—but the solution is very non-obvious. Expose the filter bar, with your favorite preset: camera info, default columns... it doesn't really matter. Hover over the header bar and to the far right will become visible the "add column" widget. Add a column. From the pop-up menu on the name will come a long list of options, the second-to-last of which is "develop preset." Once that's in place, click on "custom." Save your current settings as a new preset and give it a descriptive name like "adjusted images."
Now, when you're in your current—or any—folder, just click on "metadata" in the filter bar, and your custom preset will be in effect: any images that you've worked on will be selected. It's a fast, one-click selection.
If there's another way of doing this (keep in mind it's for the selected or current folder only), let me know. It's such a seemingly desirable action that I'm kind of astounded there's no built-in or easy or obvious way to do it... or that no photographer has requested it.

I am honored to have a response from Rikk "MVP" Flohr, and I do readily agree that your approach is one way to approach the issue. It puts the relevant images in a discrete area that is easy to access. However (this is where I look a gift horse in the mouth) I find "sorts" a bit underwhelming in comparison to "filtering." Two problems: first, the sort still does not 'clear your deck' of unwanted images. You still have to squint at the badges and carefully select the range at the top (or bottom). Mistakes can be made (and I would be the first to make them). Second, the sort command is "sticky," meaning that folder will always have that sort unless you undo it. In general, I think most photographers want to see a folder's images sorted by capture time, so they can easily glance to the beginning, middle, and end of the shoot. With my method, once you click out of the folder, the filter is taken away and you're back to normal.
I do understand that Lightroom wants me to flag my images with rankings or stars or colors or dancing beavers or what-have-you. But in this particular situation, that's an extra step. If I've applied development adjustments, it's already done. Why shouldn't I be able to choose "Select Developed Photos" from the Edit menu, right under "Select Flagged Photos"?

Filter for queue prioritization ...

Hi guys,
I have a question relating to filters for queue prioritization. I have defined filter for large messages (i.e. messages larger than 2048kB should go into XBTL queue). Is it possible to define another one that would say:
"All messages from Sender Name XXXXX larger than 1024kB should be passed into XBTL queue" ?
I know how to create such filters for other queues but XBTL queue is special case.
Do you know how to do it?
Thanks in advance!
Regards
Zbynek

Hi,
Please find the link for "How To prioritize XI messages in queues" below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59e837d3-0201-0010-c096-dc1869733413.reward me if useful. Let me know if ur issue not resolved.
Thanks,
Ramesh

Filter for Super8 Film

Similar Messages

Maybe you are looking for