Filter Idoc for 4.5B

Hi experts,
I'm working on a very old version, the 4.5B.
I'd like to make filters for Idocs:
On ECC6, it can be done with transaction BD64, what about 4.5B?
Thx,
Regards
Mehdi

remove the filter in BD64..
and add the manual code in the include ZXM06U02, by rasing exception not to create idoc and sent to external system..
use the below synatx for raising exception..
Read table int-edidd with key segment = 'E1MARCM' .
MOVE int_edidd-sdata TO XE1MARCM.
if XE1MARCM-werks ne 'requiremtnt'.
This statement stops the Process to create idoc..
RAISE DATA_NOT_RELEVANT_FOR_SENDING.
Endif.
Prabhu
Edited by: Prabhu Das on May 14, 2009 6:52 PM

Similar Messages

Filter groups for outbound Vendor master , customer master idocs

I need to create Vendor , Customer IDOCS CREMAS and DEBMAS only when the user changes the company code . I do not want the IDOCS to be produced when any other fields change.
I am able to achieve the same using filter groups for Cost Center but not for Company Code.
Thanks,
Teresa

try BD52,

BPMOn: Is it possible to send email notification to different groups based on filter value for IDOC?

Hi there,
I have setup the monitoring for idoc through interface monitoring and I am getting the alerts for the same. The alert is generated for different status values for the same idoc. Now my question is, is it possible to send email notification to two different groups based on the status values?? I mean for example , for a single idoc for some status values I want to send email notification to group1 only and for other status values I want to send notification to group2.Any help will be apperitiated.
Thanks and regards,
Rutvik Upadhyay

We currently do not support that level of control for sending email notifications. If you think others are interested in this you should add an idea here: http://forums.adobe.com/community/formscentral?view=idea
We use that to help us prioritize our work.
Thanks,
Randy

Communication IDoc is not generating after master IDoc for "DEBMAS"

Hi gurus,
i have done all steps from the beginning to the end for an Idoc transfer of type "DEBMAS".I have created the settings in BD61,BD50 and BD52.And also i can work with other master message types like ARTMAS.I didn't give any filter groups in BD64 for the message type "DEBMAS".When ever i execute BD21(RBDMIDOC) only master idoc is generating,there is no communication idocs for the message type "DEBMAS".Please help someone in this issue.
My special question / doubt is, when ever a master idoc creating ,is it must to create a communication idoc ,if there is no filter in "DEBMAS"?
Please clear someone and explain my doubt.
your help will be highly appreciative...
rgds
tom
Moderator message: Please don't use all upper case in subject line
Edited by: Thomas Zloch on Feb 28, 2010 5:25 PM

hi,
communication IDoc is missing when ...
- Distribution Modell is missing
- Filter in Distribution Model is existing an no IDoc is generated (Filter at KNA1M segment only)
try the following.
Goto BD12. Choose your partner and the receiving System and send an IDoc.
Is the Comm. IDoc generated ?
if yes ... there is something with your ChangePointer Logik (BD52, .... look at Table BDCP/V)
if no ... you should take a deeper look at BD64 distribution model.
Maybe the receiver partner or filter is not correct.
good luck,
Gordon
Edited by: Gordon Breuer on Feb 25, 2010 1:12 PM

Can't find FILTER CONDITION for filters or Function_Name for Functions

In the Data Warehouse 11gr1 views all_iv_xform...
I can't seem to find the Filter Conditions for filters and function name for functions that are called.
I have looked at the other views in the documentation for the API's but can't seem to find this information.
Any body have any ideas where this information is?
thanks
greG

select map_component_id, position, source_parameter_name
from ALL_IV_XFORM_MAP_PARAMETERS
where map_component_id in (
SELECT map_component_id
FROM ALL_IV_XFORM_MAP_COMPONENTS
WHERE MAP_ID IN (
select MAP_ID
from ALL_IV_XFORM_MAPS
where MAP_NAME = :p_map_name
AND OPERATOR_TYPE = 'Filter'
Using map_component_id and position from above query you can see your filter condition defined in property_value:
select map_component_name, property_name, property_value
from ALL_IV_XFORM_MAP_PROPERTIES
where map_component_id = :p_comp_id;

Help required on OutBound IDoc for FI Invoices

Hi All,
I had a requirement to create a custom idoc for FI invoices via a user exit and these idocs will be routed (via RFC) to a JAVA server/processor. Pls suggest how can i acheive this.
Is there any user exit for acheiveing this or can we proceed further without user exit also.
If so how to acheive this.
Thanks & Regards,
Anil.

One option that immediately pops up is
Using Output Types: like for example transaction V/40
Application: V3 Billing
You can define a unique output type : ZINV
Transmission Medium : 6
Processing Routine
Program: RSNASTED
Form Routine: EDI_PROCESSING
You can then use WE20, and define a unique customer / and map message control (ZINV) information in outbound parameters.

Outbound IDOC for Credit Management

HI All,
We need to send the Credit management data from SAP to other system. For that we require Standard IDOC, could you please suggest the standard IDOC available for the same and how to configure it. Please let me know if we have any standard program which generates the IDOC for my requirement.
Regards,
Phanindra

Thanks for the Input, could you please let me know how we trigger this IDOC. Is it through configuration or any standard program which will generate idocs.

Is it possible to generate outbound idocs for FI invoices? How?

Is it possible to generate Outbound idocs for FI invoices? How? or else i have to write program to get data in file and pass it to translator. Please help.

Dear Gabriel
Before letting you know the possibility, can you please let me know why you want such a requirement, since standard has not provided such copy control, to my knowledge.
As you would know order type KB is for consignment fillup where you are just transferring the goods from FG unrestricted to your own warehouse and that is why in standard you can see the copy control KB --> F8 which means you can raise proforma against delivery and not against fillup order.
So think of whether really you wanted to raise proforma against fillup order which is NOT recommended by SAP. However, still if you feel that the requirement is so to have, you can make the settings in VTFA.
thanks
G. Lakshmipathi

Function Module to Generate Outbound IDOC for Sales Documents

Hello Experts,
Can someone please help me, I need to know which function module to use in order to generate the outbound IDOC for sales documents. Some of the fm's I have come across are the following:
IDOC_OUTPUT_ORDERS, but actually for Purchase Orders
IDOC_OUTPUT_ORDRSP, but did not generate any IDocs for my sample Sales Order.
Points will be given for any help provided.
Thanks in advance.

Hi Nagaraj,
I tried using the IDOC_OUTPUT_ORDERS but I keep getting an error that the Purchase Order <xxx> does not exist, even though the document I tried is a sales order. For everyone's reference here is the code:
form process_data.
DATA v_idoc TYPE edidc-docnum.
DATA i_edidd TYPE TABLE OF edidd.
DATA wa_idoc_ctrl TYPE edidc.
LOOP AT i_nast INTO wa_nast.
 CLEAR i_msgs[].
 CALL FUNCTION 'WFMC_PROTOCOL_GET'
 EXPORTING
 cps_nast = wa_nast
 tables
 messages = i_msgs
 EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2.
 LOOP AT i_msgs INTO wa_msgs WHERE arbgb EQ 'E0'.
*--- Check first if there is an IDOC
 IF wa_msgs-msgv1 IS INITIAL.
 CONTINUE.
 ENDIF.
 v_idoc = wa_msgs-msgv1.
 CLEAR i_edidd[].
 CLEAR wa_idoc_ctrl.
 CALL FUNCTION 'IDOC_READ_COMPLETELY'
 EXPORTING
 document_number = v_idoc
 IMPORTING
 IDOC_CONTROL = wa_idoc_ctrl
* NUMBER_OF_DATA_RECORDS =
* NUMBER_OF_STATUS_RECORDS =
 TABLES
* INT_EDIDS =
 INT_EDIDD = i_edidd
 EXCEPTIONS
* DOCUMENT_NOT_EXIST = 1
* DOCUMENT_NUMBER_INVALID = 2
 OTHERS = 3.
 CALL FUNCTION 'IDOC_OUTPUT_ORDERS'
 EXPORTING
 object = wa_nast
 control_record_in = wa_idoc_ctrl
* IMPORTING
* OBJECT_TYPE =
* CONTROL_RECORD_OUT =
 tables
 int_edidd = i_edidd
* EXCEPTIONS
* ERROR_MESSAGE_RECEIVED = 1
* DATA_NOT_RELEVANT_FOR_SENDING = 2
* OTHERS = 3
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 COMMIT WORK.
 ENDLOOP.
ENDLOOP.

Manual creation of idoc for a Accounting document FIDCC1

Hi,
Some of the config for the change pointer was not moved to production and some accounting documents have been created which have not triggered the IDOC.
Is there a way to create the idoc for the accounting documents already created.
Regards,
Puneet.

Once you have all your change pointers setup correctly (view bd52) then you should be good to go BUT to answer your question about the existing documents .. you would need to somehow "touch" those documents to trigger the creation of the IDOCs. You can modify something on then that also is attached to the change pointer say a date? 1/11/11 change to 1/12/11 but don't save that value .. change back to 1/11/11 then save.
Just my thoughts .. let me know how it goes.
Jay Esparza

Sales/Stock data via IDOC for replenishment

How to capture customer sales and stock data through IDOC for customer replishnment.
We want to see stock update in Tcode WVM4 (w10t --> Logistics --> Retailing --> Sales -->
Replenishment --> Overview > Stock / Sales> WVM4).I am not sure the correct way to resolve this issue.
We have the flat file, which need to be uploadin our sap database table, so we can use it in customer specific replinshment.
I have followed below step to achieve this target.
Process followed:- Idoc Inbound
Step1) Created segemt WE31 based on our file data
step2) Creation of Idoc type we30
step3) Created Msg type we81
step4)Assign Message type to idoc type WE80
what other/new step is required to complete this requirement? We don't need any ALE connection, since we have flat file in out local system

Nishant,
This is NOT the way IDOCS are to be used. When you want to communicate between two SAP systems, you recieve a info from a middleware you use IDOCS.
Here if you want you can read the data and call the concerened BAPI, to create the Sales order.
regards,
Ravi
Note : Please mark the helpful answers

IDocs for Invioce and Delivery

Hi all,
I have to send the customer the Invoice and Delivery confirmation for that order placed by him through an IDoc in background job.
We are going for a standard IDoc for invoice and Delivery also but how to fill the data into that standard IDoc.
1.Do we have standard report like (BD12, BD14, BD10 etc.)
2.Should we develop a report to fill the data into that Idoc.
Please help me to find standard report or please help me to write code for that standard IDoc.
Thank you all in advance,
Regards,
Shalem.

Hi Shalem,
You need to do the following activities.
- Setup condition record (t/code NACE) for shipping (V2) and billing (V3).
- Setup output type (t/code NACT) for shipping (V2) and billing (V3) with transmission medium A (ALE).
- Setup procedures (t/code NACZ) for shipping (V2) and billing (V3) if required.
- Once the above setup are done, for any creation of billing and shipping will create entries into table NAST (Message Status).
- Then you can create IDoc using this standard program RSNAST00. Please ensure your ALE and IDoc configuration have been done such as BD64, WE20, WE21 and etc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Do you know the idoc for master recipe?

Hi all.
Do you know the idoc for maintain master recipe?
I am looking for the idoc.
I would like to create, update and delete master recipe with idoc.
I have investigated about idoc,but can't find suitable idoc.
(I did find it for BOM, but for recipe is nothing.)
Thank you in advance..
Satoru

Hello,
As far as I can see there are no BAPI's or IDOC's available to upload Master Recipe data.
A suggestion would be to use the batch input technique to upload the master recipe master data. You find the documentation of the batch input recorder etc. via the menu path System -> Services -> Batch input -> Recorder
I hope it helps,
Regards,
Marcelo

IDOC for inbound delivery

Hi Gurus,
Pls help me to understand this functionality:
Shipments destined for a Distribution Center will generate ASNu2019s(advance shipping notification) to alert the Distribution Center to the upcoming receipt.
There are two variations of the transaction that will initiate the ASN:
u2022 Receipt of an ASN from a vendor to a Distribution Center will result in the creation of an Inbound Delivery. That Inbound Delivery must be sent to WM via IDOC.
u2022 Shipments from Distribution Center to DC will create an Outbound Delivery from the u201CClose Loadu201D process in Warehouse M. Creation of the Outbound Delivery to another DC is the trigger for the IDOC to WM.
The IDOC to be used could be a variation of the DELVRY03.
My doubts includes:
1. can I use one idoc for both the scenarios?
2. both are outbound idocs or not?
3. Any suggestions how to do this?
Thanks..
SD

>
Shibu David wrote:
> My doubts includes:
> 1. can I use one idoc for both the scenarios?
Yes you can use IDOC DELVRY03 for both scenarios
>
Shibu David wrote:
> 2. both are outbound idocs or not?
No.
ASN sent to DC will be outbound message.
ASN received by DC, which creates Inbound delivery is inbound message.
>
Shibu David wrote:
> 3. Any suggestions how to do this?
As far as I know message type used in SAP for ASN is DESADV.
For inbound ASN use process code DELS and for outbound use DELV

I/B EDI IDoC for Service Ent Sheet & Goods Receipt against PO SAP ECC 6.04

Hi EDI Experts ,
We Have ECC 6.04. We are planning to have inbound EDI IDoC for Goods Receipt against PO & Service Ent Sheet .
1.For Goods Receipt against PO I have identified below Message type:
MBGMCR / MBGMCR03 - Used in SRM Confirmation IDOC from SRM & SUS
WMMBXY/ WMMBID02- Messages Types - I remember used in last Project
Can anyone please suggest/confirm me , exactly which is most used and most suitable ?
2. For Service Ent Sheet inbound posting I unable to find any IDoC and never heard same.
( I learnet that from SUS Service entry posted in ECC by eSOA with PI ( XML).... or in other cases it may created using some BAPi)
What is exact fact ? Is there Service entry sheet can not pe posted by IDOC ? If yes, how ? if now, what is the best options ?
Thanks in advance.
Regards
NAP

Hi ,
In MM-SUS deployment,
Until SRM 7.0 with ECC 6.04, Service procurement using MM-SRV & SAP SUS, was not provided. But, as of “SRM 7.0, only in combination with ECC 6.04 ”, SAP standardized the “Service Procurement” scenario along with Material Procurement for MM-SUS deployment and so fully supported for Material & Services .
Please refer the Note 868192 & 1269540 and Technical scenario matrix ( criterion 18) document for details.
So for there is Enterprise Services ( eSOA) and not IDOC. Please see below messages for Services.
Create Purchase Order
PurchaseOrderERPRequest_Out_V
Outbound
Change Purchase Order
PurchaseOrderERPRequest_Out_V1
Outbound
Receives Service Entry Sheet
ServiceAcknowledgementERPCreateRequest_In
Inbound
Approve Service Entry Sheet-> Send Approval Note
ServiceAcknowledgementERPConfirmation_Out
Outbound

Filter Idoc for 4.5B

Similar Messages

Maybe you are looking for