Filter Import by Number of Rating Stars and other such

My work flow is to look at the card with Nikon ViewNX2, and assign rating stars to the keepers, then import the keepers
into Lightroom. I can't see the stars in the import dialog, though I can see them once I do the import. LR clearly
understands the rating stars because it can import them. I'd like to be able to see the rating stars in the import dialog and
filter on them at import time. I suspect that there are others out there that would like to filter on color labels and the flags.
Why not use Lightroom for the review? I sometimes don't have the Lightroom computer with me, or any computer at all.
Nikon ViewNX2 is free, and I can install it on whatever computer is handy. It's also fast, and understands dual monitors.
Simliar logic applies to BreezeBrowser and even the free Microsoft software.
There was some discussion of this in http://forums.adobe.com/thread/724396?tstart=0.
Chuck

Similar Messages

Standard report which importe personnel number from one server to other

Dear Hcm Gurus.
Is any standard report exist in SAP Which imports Personnel number from one server to other server which are maintained in Source server ,imported all contents maintained in source server.
e.g An employee is hired in u201C Server Au201D and personnel number is generated internally while we want to imports same employee data with same personnel number in Server u201CBu201D
IS it possible ? if is kindly do help and clarify any standard report which import complete data from one server to other server with all its infotypes.
barket

Hi,
a standard way should be setting up an ALE scenario between the two systems to transfer employee data and keep them updated. This needs a bit more set up than a single report to be run but it is a common way to create HR landscapes where different local HR systems consolidate data to a centralized system.
The other options are valid, too. But I know them more for transfering data for test or validation reasons.
If you could add some more information to the business background of your requirement we could add give a better suggestion which solution to head for.
Kind Regards
Roman

Max Number of Time Series and Other Columns?

What are the ceilings on the number of Time Series and Other Columns that BOP can handle?
I can not find this very basic info anywhere but I have a client that I think has hit it.

@ cfr:
I googled. But I opened this thread the July 25th and I'd forgot about that link and the fact that my problem could be Firefox fault. Silly me. -_-
I'm trying to surf w/ Chromium right now (I don't like very much Opera and other browsers based on Webkit don't read much stuff on the web) to check if issue returns. If so I'll try to check log.
Edit:
I found that I don't even like Chromium as well. So I think I'll use W3m and Elinks for "normal browsing" and FireFox just when I need to write a mail with my damned Hotmail account.
Edit (2012-10-08):
the issue still presist, even without Firefox.
Last edited by rix (2012-10-08 20:16:25)

Can I block text messages from 0000727272, 0000555444, and other such messaging?

My wife is receiving text messages from and sometimes replies to 0000727272, 0000555444, and other message numbers that do not correspond to a phone number. I believe she is having an affair and I need it to stop. I want to block these numbers and the other such 5 and 6 digit numbers from texting her phone. How do I go about doing this? In addition, is there anyway to determine who these messages are from? Can customer service tell me who is texting her? She is on my account. I have tried to look at her phone but she always deletes the messages from these numbers. Thanks.

These are simply SMS short codes. 727272 is for Redbox. Not sure about 555444.
Regardless, this would certainly be an expensive way to have an affair. Short codes cost $500/month to get a number picked at random. To get one of your choosing, assuming it is available, is $1000/month.
Normally, these are for businesses in order to sign up for their services/promotions. For instance, texting "freebies" to 727272 will get you coupons for Redbox.

Home sharing - sharing rating (stars) and playlists

Is there some way, how can I sync playlists? On one computer I have some database of music, which is rated and where I have some playlists. On second computer I have almost the same music, so I don't need to copy the files from my playlist from first mac to second mac, I just need to copy the playlist.
O for example if I rate song on one computer, I want the second computer sync it.
Is that possible?

you can export playlist(s) on machine "A" via file > library > export playlist, move the resulting .txt file via your network (or by way of an USB flash drive) to machine "B", and import the .txt file there. it will import as a playlist and will contain ratings and playcounts.

Stars and Other Icons on Thumbnails Disappeared

I'm having an annoying and confounding problem.
The little icons on my thumbnails (i.e. Starts, Referenced, Metadata, Keyword, etc.) have all disappeared. It is making my book building quite difficult.
Is this a simple "feature" that I accidentally switched?
Help would be appreciated.

pressing the Y or U keys will toggle the metadata overlays for both the viewer and the browser.
more info here:
[Aperture metadata|http://photo.rwboyer.com/2008/08/aperture-and-metadata-display>
RB

Something On My Mac is Blocking WoW, Second life, and other such games

I can't figure it out. There's some program on my Mac that's blocking the game's ability to go online. I uninstalled Norton (with a full norton remover) and it has no processes running, my Mac firewall allows all connections...I just cant figure it out. Here's my list of processes. When I run VMWare Windows, the things work well, but being games, it works slowly. It has to be something Mac.
Active Memory: 815.78 MB
Free Memory: 900.50 MB
Wired Memory: 175.98 MB
Used Memory: 1.11 GB
Inactive Memory: 140.21 MB
Total VM: 60.50 GB
Number of processes: 86
ID Process Name User CPU RSIZE VSIZE
0 kernel_task root 4.7 85.58 MB 1.15 GB
1 launchd root 0.0 532.00 KB 586.73 MB
10 kextd root 0.0 1.15 MB 586.19 MB
11 DirectoryService root 0.0 3.02 MB 588.79 MB
12 notifyd root 0.0 464.00 KB 586.18 MB
13 syslogd root 0.0 1.32 MB 588.66 MB
14 configd root 0.0 1.88 MB 587.23 MB
15 distnoted daemon 0.6 740.00 KB 585.59 MB
16 mDNSResponder _mdnsrespo 0.0 1.18 MB 587.50 MB
18 launchd _mdnsrespo 0.0 448.00 KB 585.73 MB
20 securityd root 0.0 1.92 MB 587.37 MB
25 ntpd root 0.0 836.00 KB 586.12 MB
26 cron root 0.0 636.00 KB 586.69 MB
28 update root 0.0 284.00 KB 585.57 MB
29 SystemStarter root 0.0 676.00 KB 585.61 MB
33 RFBRegisterMDNS root 0.0 1.05 MB 586.62 MB
34 mds root 0.0 19.39 MB 722.31 MB
35 loginwindow ben 0.0 8.52 MB 894.75 MB
36 KernelEventAgent root 0.0 640.00 KB 585.68 MB
37 kdcmond root 0.0 1,020.00 KB 585.73 MB
39 hidd root 0.0 580.00 KB 585.59 MB
40 fseventsd root 0.0 1.27 MB 593.35 MB
41 dynamic_pager root 0.0 704.00 KB 585.61 MB
43 diskarbitrationd root 0.0 1.03 MB 585.69 MB
47 autofsd root 0.0 664.00 KB 585.62 MB
48 socketfilterfw root 0.0 1.48 MB 585.83 MB
52 coreservicesd root 0.0 23.77 MB 615.97 MB
54 blued root 0.0 2.00 MB 596.61 MB
72 vmnet-natd root 0.0 244.00 KB 586.14 MB
78 vmnet-dhcpd root 0.0 208.00 KB 585.93 MB
80 vmnet-netifup root 0.0 152.00 KB 586.64 MB
83 vmnet-netifup root 0.0 152.00 KB 586.64 MB
88 vmnet-dhcpd root 0.0 208.00 KB 585.93 MB
90 vmnet-bridge root 0.0 376.00 KB 586.70 MB
91 WindowServer _windowser 25.9 38.54 MB 957.45 MB
100 krb5kdc root 0.0 1.39 MB 586.05 MB
110 llipd root 0.0 220.00 KB 585.59 MB
112 qmasterd root 0.0 3.58 MB 592.13 MB
121 privoxy root 0.0 3.92 MB 670.04 MB
123 RetroRun root 0.0 2.84 MB 734.00 MB
124 qmasterd root 0.0 3.81 MB 592.20 MB
140 pvsnatd root 0.0 532.00 KB 588.22 MB
148 coreaudiod root 0.0 5.68 MB 594.61 MB
162 RetroRunSL root 0.0 6.00 MB 917.69 MB
165 mdworker nobody 0.0 2.88 MB 602.80 MB
166 mdworker ben 0.0 8.44 MB 643.22 MB
168 launchd ben 0.0 540.00 KB 585.73 MB
172 Folder Actions Dispatcher ben 0.0 3.08 MB 873.02 MB
175 ARDAgent ben 0.0 2.96 MB 905.40 MB
177 Spotlight ben 0.0 4.69 MB 880.55 MB
178 UserEventAgent ben 0.0 5.82 MB 607.57 MB
180 AppleVNCServer ben 0.0 2.15 MB 852.86 MB
181 pboard ben 0.0 580.00 KB 586.63 MB
182 ATSServer ben 0.0 5.64 MB 667.04 MB
183 VNCPrivilegeProx root 0.0 616.00 KB 586.61 MB
184 Dock ben 0.0 21.57 MB 952.62 MB
185 WDBMService root 0.0 116.00 KB 586.62 MB
190 SystemUIServer ben 0.0 12.12 MB 931.26 MB
191 Finder ben 0.0 10.70 MB 935.40 MB
210 iTunes ben 0.0 42.57 MB 985.90 MB
213 nmbd root 0.0 1.23 MB 586.94 MB
221 pplogger ben 0.0 3.95 MB 896.43 MB
222 pploader ben 0.0 7.69 MB 877.63 MB
223 iTunes Helper ben 0.0 2.32 MB 849.18 MB
224 Quıcĸsıɩⅴεʀ ben 0.0 22.96 MB 952.32 MB
225 Adium ben 0.0 24.68 MB 985.13 MB
227 YouControlTunesEngine ben 0.0 7.85 MB 916.68 MB
228 Speech Synthesis Server ben 0.0 2.95 MB 873.13 MB
231 iAlertU ben 0.0 12.39 MB 928.06 MB
232 EyeTV Helper ben 0.0 2.49 MB 849.26 MB
233 GrowlHelperApp ben 0.0 11.64 MB 924.62 MB
234 PlugSuit ben 0.0 3.39 MB 872.98 MB
235 Microsoft AU Daemon ben 0.0 2.28 MB 864.66 MB
236 MagicMenu ben 0.0 5.13 MB 915.96 MB
237 Mail ben 0.2 38.57 MB 1,015.48 MB
238 Spirited Away ben 0.0 4.77 MB 930.93 MB
239 EarthDesk Engine ben 2.8 78.87 MB 1.08 GB
240 Safari ben 1.2 139.97 MB 1.13 GB
243 usbmuxd nobody 0.0 684.00 KB 586.98 MB
253 MagicMenuHotKeyDaemon ben 0.0 2.49 MB 879.34 MB
263 SyncServer ben 0.0 5.18 MB 601.36 MB
274 launchd _securitya 0.0 448.00 KB 585.73 MB
365 AppleSpell.service ben 0.0 3.46 MB 601.71 MB
372 Activity Monitor ben 37.9 17.19 MB 988.68 MB
373 pmTool root 23.3 1.34 MB 595.68 MB
387 smbclient ben 0.0 1.18 MB 588.29 MB
Thanks!

Thank you for the reply. I did try change my DNS server didn't seem to help.
When you are on iTunes and click on Help Menu highlight Run Disgnositcs choose Network Connectivity Test do you get any red buttons?
Thanks for you help!!

I have two numbers listed in my messages tab under settings. One number is checked(mine) and the other is not(my sons). However when someone sends me a text it goes to both mine and my sons iphones. How do i delete his number from my phone.

I have two numbers listed in my messages tab under settings. One number is checked(mine) and other is not(my sons). However when someone sends me a test it goes to both numbers. Mine and my sons. How do I delete his number so that he no longer received texts intended for me.

The best way is to not share Apple IDs but also make sure under Settings & Messages on both devices that only one phone number is checked.

I'm affraid I lost my "Word" document of 30 pages. I can see only stars,squares and other strange figures. How can I recover this? Please I need help!!!

I need help! My daughter is busy with her final studyprogram. Her "word" document changed into stars and other strange figures. Is there a possibility to recover this. I hope someone can help her!!!! thanks jvdharst

Are you using the latest version of MS Word? It’s possible you can restore the corrupt file from the last saved version or the automatically saved version. Have you tried that? MS Word uses a folder called Autorecover to store temporary versions of your file. Hopefully there’s a good version in that folder. Use Finder to search for Autorecover if needed.

How to get Mobile number and other information from SIM card

Hi,
I like to get mobile number,mobile user name and other information from SIM card using j2me program.Is there is any API for this one.
Any one give guidelines to me how to get this.
with regards,
latchiya

Please use the search! this topic has come up lots of times already.

A useful guide to broadband, DLM, and other stuff

Dear all,
Here is some information I stumbled over whilst in my quest to understand broadband and why mine is broken. A little old but it will explain some concepts such as dynamic line management (DLM), line stabilisation, errors, and other such things. I hope it will help clarify the truths and the legends and allow people to understand the explanations offered by the technical and not so technical staff!
Good luck one and all.
http://www.thinkbroadband.com/files/broadband-max-myths-and-legends.pdf
thedoctor.

Nice info thank you
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Using bootcamp to install XP followed by Photoshop and other Adobe products

I just got MacBook Pro and am about to use Bootcamp to install Windows XP so that I can use Photoshop and other such Adobe programs. Anybody, who has done this, what can you tell me about it? Does it work well? How much of a partition do you recommend? Have you encountered any problems during this process? Are there any major dangers involved with installing XP on my mac?

I have done all of the above with No Issues thus far:
1) Boot Camp/Windows partition I use is 50MB for XP SP2
2) I have Adobe Photoshop 7.0 installed
3) No problems on my side
I printed out the Boot Camp/Windows instructions and followed them exactly.
Axel F.

.avi files and audio codecs with Quicktime and other software

Apple Mac OSX 10.5.8, Samsung LED TV, Video Camera saving movie files as .avi, audio codec unknown (G-Spot codec is not supported on the mac so I can’t check)
As a well retired non-computer savvy person I am very confused when it comes to talk about different video/audio codecs. I have read so many articles my head is now spinning with information I truly cannot understand.
Using the above hardware, when I play an .avi file direct from my camera onto my new TV I get a perfect picture but the TV tells me “the audio codec is not supported”.
I have tried, using Quicktime Pro and others such as AVCWare Mac Video Converter and Divx converter, to convert the .avi file with unknown audio codec to an .avi using mp3 codec. This is successful but the camera will not play the file and when downloaded onto a flash stick the TV now tells me “not supported file format”. The TV gives me a Divx registration and deactivation code but I am not sure whether this refers to the TV or the flash stick!
To keep things short, all I want to do is edit/crop .avi files from the camera, save with a readable audio codec, put the files into the TV using a burnt DVD or play direct using a flash stick. The TV supports among other video formats Avi, MKV, ASF, MP4, 3GPP and audio being mainly MP3, AC3, LPCM, ADPCM
Hope someone can help please.
Many thanks Robin Welch

Hi George,
Thank you very much for your last post. One small piece of information from you regarding frame size was the final part to my jigsaw. I recently purchased a new digital camcorder and LED TV and getting them to talk to each other has taken me since December! Having installed MediaInfo as you suggested, I found the camera saved the .avi files with AAC LC audio codec (first piece of the jigsaw). Talking to the people at DivX about the problem brought up the fact that both my TV and Sony Home Theatre should be registered to play DivX files, this I did (second piece). Having reinstalled Perian and opening my .avi files in Quicktime player I tried saving the files as DivX to several profile options including Home Theatre with max 720 pixels (last piece). At last it works fine. Thank you for your help, I am very grateful.
Robin

Keeping keywords and rating 'stars' a permanent part of RAW files

I store RAW files on a portable HD.
I use it for both desktop and laptop.
Keywords and rating 'stars' entered on one machine do not appear when using the other.
How can i make the keywords and rating 'stars' transferrable from one machine to another?

I had a chance to talk to product managers from both Apple & Adobe about this at PhotoPlus Expo in NYC a couple years back. Both seemed receptive, but here we are - years later - no progress.
I think part of the problem is that there's a purist mentality about RAW files. One should always shoot them - and then keep them forever- after all- they're your negatives!
But what about event photography? Or weddings, as you pointed out? It makes no sense to burden your workflow & backup system with 4GB of RAW files of people grinning into the camera. Once the adjustments have been made, the RAW files are just a ball & chain on your data management. And let's not forget, once you really know what you're doing, your jpegs should be good most of the time anyway.
I want RAW files as a safety net for errors in exposure and white balance. Once I know I have good photos, I don't need the safety net anymore- at least not at the price of all that hard disk space and transfer time for online backup. Of course, for my fine art stuff and important documentary work, I'll always keep the RAWs permanently. But not for routine parties/events.
You put your finger on the problem with re-importing jpegs as a solution. You lose your metadata- rankings/album memberships, etc. This is no solution!
What I want is simple, and it would be immediately useful to countless photographers:
1) Let me batch-delete RAW files when the jpegs are ok.
2) Let me do adjustments on my RAW file, render out a high-quality jpeg, and make the jpeg my new master.
Whoever does this first - Aperture or Lightroom - that's the product I'll use.

Photos/Fotos: One of the most important selection features the is "Star" rating. How on earth can you stop supporting this feature ???

One of the most important selection features the is "Star" rating.
How on earth can Apple stop supporting this feature ???
My iPhoto lib contains >100´000 photos. All of them are rated with stars. Dependent on the rating I distribute the photos on >20 apple devices in our family.
Many friends of mine do the same.
It´s time for a severe request to Apple to take over that feature from iPhoto to Photos. They should start to learn, that people that liked their previously released software have spent hundreds of hours to adapt their data with that software to their needs. I´m using Mac´s since 1984. Might be that I start thinking about using different systems if they continue to through away my efforts from the past...
If you dislike Apples latest moves and like this feature too you need to provide feedback to them on the following web page: www.apple.com/feedback
Horst

Remember that star ratings are not part of standard metadata.

Filter Import by Number of Rating Stars and other such

Similar Messages

Maybe you are looking for