"filter" in Planning and 'characteristic restriction" in the query??

Hi all,
Can someone clear my confusion regarding 'filter' in the planning modeler and 'char restriction' in the planning query?
1) do they do the same thing for planning query/ data?
2) If not, can someone give me a business example?
Thanks,
R.

Hi Mayank,
I am not sure that I understand your explanation. Correct me if I am wrong.
1)If I restrict 0plant-5000 in the planning query, I either setup 'filter' in the planning modeler or in the 'CHAR restriction'. If so, which way is better? Why?
2) what is re-usable filter?
3) in the BEx filter, there are two options- CHAR restriction and default. I checked online info and it said that you can change 'filter value' in the run time if u restrict 0plant 5000 in the planning query. However, I found that it seems it is not true, I can change filter value in the runtime if I restrict 0plant-5000 in the 'CHAR restriction'. Did I miss something?
Thanks,
R.

Similar Messages

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get the refund of the non used part of the old plan?

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get the refund of the non used part of the old plan?

Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara

I have a iphone 4 plan and when i got the phone i asked telstra to disable 3g so i couldnt use it. Is there any way of getting it back.

i have a iphone 4 plan and when i got the phone i asked Telstra to disable 3g so i couldn't use it. Is there any way of getting it back.

You need to arrange that with the carrier since they are the ones that disabled it.

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara

I bought my MacBook with the Apple Care Protection plan, and happened to scratch the bottom of my Mac. Will they replace the bottom of it for free?

I bought my MacBook with the Apple Care Protection plan, and happened to scratch the bottom of my Mac. Will they replace it for free? the bottom of the mac is were it got scratched

Didn't you read the warranty paperwork to know what's covered and what's not?

When to use SELECT and END SELECT in the query.

hi all,
When to use SELECT and END SELECT in the query.
regads,
Venkata Suresh Penke.

Hi Suresh..
When do we need to use SELECT .. ENDSELECT
Usually we will never use SELECT .. ENDSELECT as it gives very poor performance.
But whenever we read a single Record we will use it as an alternative for SELECT SINGLE in some scenarios.
Eg: When the Full primary key is not specified in the WHERE clause.
SELECT * FROM MARC INTO WA_MARC UP TO 1 ROWS WHERE MATNR = P_MATNR.
ENDSELECT.
And other scenario is when we perform AGGREGATE OPERATIONS.when the Result is only one row.
SELECT SUM( LABST ) FROM MARD INTO V_LABST UP TO 1 ROWS
WHERE MATNR = P_MATNR.
ENDSELECT.
Note: In The Above scenario we cannot use SELECT SINGLE..
<b>REWARD IF HELPFUL.</b>

Comfortable in the usage and options available in the query designer/WAD.

Dear Friends
can any body send me docs regarding Comfortable in the usage and options available in the query designer/WAD.
Thanks & Regards
Ramana

Hi Friend,
For WAD :
[http://help.sap.com/saphelp_nw04/helpdata/en/a9/71563c3f65b318e10000000a114084/content.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/9f/281a3c9c004866e10000000a11402f/content.htm]
For Query Designer :
[http://help.sap.com/saphelp_nw04s/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/605f1751-a701-2a10-b791-9da5ba4f2a64]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0a81de5-a701-2a10-76bd-d8ec848cd326]
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/505e9d7e-0601-0010-3fa7-b40010bbdec5]
[http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
Scroll down to Business Intelligence-> Bi suite Business Explorer-> Query Designer
Hope this helps.
Regards
Hemant Khemani

How to create email message filter that will AND multiple keywords in the message body

Greetings,
I am using BlackBerry Desktop Manager (version 4.3.0.17) and I need a filter that will match ALL keywords in the body of a note rather than ANY one of a list of keywords. I understand that separating keywords with a semicolon will match on any one of them, but I would like to match on ALL keywords that may be interspersed throughout the body of the email. In other words, I understand that the semicolon works like an OR connector. I need a connector that works like an AND.

Hi bik,
>> how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible in a text editor but not the text file.
It is unclear to me. Like you mentioned F keys, how does it work for? And Could you show us some code with a simple sample or a capture? It could be better to help us understand more.
In addition, I found a related thread
Tag editing in a WPF TextBox. Not sure if it is useful for you. Thanks.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Planned and Actual costs at the Activity level

Hi all,
Can you tell me if there is a R/3 report which lists out the planned and actual costs for a project and displays it for each network and activity? I want these values at the activity level.
I found a report which lists out these values for each network, but I cannot drilldown to the activity level. Please help.
Thanks,
Satyajit.

Hi,
There is setting in network type. Please go through transaction OPUV i.e.
Change view- Network type paramaeters : overview " Overview.
Uner Network type parameters there is one radio button in front of ActvtyAcctAssgn. Just activate it.
Hope this helps.
Regards
Tushar

I have the photography plan and want to add the complete package so that I have 2 licenses for Photoshop and 1 for everything else.

I purchased the photography plan for one person, and want to add the complete package for myself. I don't see where I can add another package online. It just says I can upgrade the photography one I currently have.

Hi Jeremy,
It sounds like just joining Creative Cloud with a different email address/Adobe Id for the full membership would be what you should do rather than upgrading.
- Dave

Changing the Characteristic Values on the Query

Hello Masters of the BW Domain
Is there a way to display the values of a characteristic in a report based on a condition? I have a characteristic called Rebates with only 2 valid values (Y and N). Instead of showing it as Y and N, I want them displayed as "With Rebate" for Y and "No Rebate" for N. Is it possible to do this without changing the underlying data in the cube and doing the translation at the query level? Would it require a user exit to accomplish this? All the user exits that I've run into only dealt with dates and not with transforming text values.

As Paolo suggested you can add text for the info object. Else if you are using BW Web Reports you can use the Table API(similar to user exit) to do the conversion.
case i_iobjm .
when 'rebates'.
    if i_value = 'y'
      c_cell_content = 'With rebate'.
    elseif i_value = 'N'
      c_cell_content = 'With rebate'.
    endif.
endcase
*Please check for the syntax.
If you are using BEx, VB macros will be an option.
The best approach will be to store text for the info object.
Thanks.

Undo_tablespace and undo_retetion or tune the query which one to increase

hi all,
In my logs file s
ORA-01555 caused by SQL statement below (SQL ID: 9nc0n06yryhbk, Query Duration=165122 sec, SCN: 0x05ff.062f3363):
Tue Feb 5 02:26:39 2008
SELECT /*+ FIRST_ROWS */ /*+ ORDERED */ B.GID ,K.ELEMENT_TYPE ,K.DATA_SOURCE_GID ,K.PROD_ID ,K.OPTION_CD ,K.MCC ,K.SPN ,K.REGION_CD ,K.WW_CD ,K.COUNTRY_CD ,K.ERROR ,B.GBATCH_ID
,B.PERIOD_SEQ_NUM ,B.ACTION ,B.ERROR B_ERROR ,B.COST ,B.INPUT_FILE_ROW_NUM ,B.ACTION_STATUS ,B.ACTION_TIMESTAMP FROM T_INPUT_BUCKET B, T_COS_INPUT_KEY K WHERE B.ACTION_STATUS =
'initial' AND B.GINPUT_KEY_ID = K.GID AND B.GBATCH_ID = :B1 AND ROWNUM < 8001
Tue Feb 5 02:35:21 2008
Thread 2 advanced to log sequence 42907
Mon Feb 4 09:10:55 2008
ORA-01555 caused by SQL statement below (SQL ID: 9nc0n06yryhbk, Query Duration=104081 sec, SCN: 0x05ff.05ebc008):
Mon Feb 4 09:10:55 2008
SELECT /*+ FIRST_ROWS */ /*+ ORDERED */ B.GID ,K.ELEMENT_TYPE ,K.DATA_SOURCE_GID ,K.PROD_ID ,K.OPTION_CD ,K.MCC ,K.SPN ,K.REGION_CD ,K.WW_CD ,K.COUNTRY_CD ,K.ERROR ,B.GBATCH_ID
,B.PERIOD_SEQ_NUM ,B.ACTION ,B.ERROR B_ERROR ,B.COST ,B.INPUT_FILE_ROW_NUM ,B.ACTION_STATUS ,B.ACTION_TIMESTAMP FROM T_INPUT_BUCKET B, T_COS_INPUT_KEY K WHERE B.ACTION_STATUS =
'initial' AND B.GINPUT_KEY_ID = K.GID AND B.GBATCH_ID = :B1 AND ROWNUM < 8001
Mon Feb 4 09:14:08 2008
===============================================
and my undo_retention
Current usage:
UNDO_01 96736 11596 12 88
UNDO_02 96736 9357 10 90
NAME TYPE VALUE
undo_management string AUTO
undo_retention integer 36000
can anyone please guide me which one is best to increase undo_retention or undo_tablespace
or tune the query?
my database version is
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
PL/SQL Release 10.2.0.2.0 - Production
"CORE 10.2.0.2.0 Production"
TNS for HPUX: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
thanks in advance

IMO best is to
1) tune the query to minimize time and resource use;
2) set the undo_retention to size the undo tablespace for the required 'consistent read' rebuild requirements;
3) set the retention guarantee appropriately
4) size the undo tablespace based on the required size, probably dictated by 2)
Why is this an 'either one or other' question? When driving a car and looking for best fuel efficiency, you tune up the car, drive properly AND use the right fuel. You don't just pick one and leave it at that.

Trying to register my AppleCare Protection Plan and it doesnt accept the serial number

Everytime I put the serial numbe it is not recognised.

Alternatively, you can try plugging in the iPad to a computer for the first time.
Make sure iTunes 10.6+ is installed. When you plugged it in for the first time, you will be given a prompt to register the iPad with Apple without entering the serial - it is automatically detected.
Edit: Oh, the extended plan?

Filter on date and time from Live Office query panel (Excel)

Hi,
I'd like to know if someone already tried this.
1- Create a univers with 3 fields.
a. Field 1 type date: points to a type date field (ex: 2011-12-31 00:00:00)
b. Field 2 type date: points to a type time field (ex: 17:00:00) -> which is basically 5pm
c. Field 3 type date: points to a type datetime field (ex: 2011-12-31 17:00:00)
2- Open Excel and using Live Office plugins
3- Open the univers
4- Drag the Field 3 as filters.
5- Choose an operator ex: Between, Greater, etc.
6- Open the calendar and select a date
7- Modify the 00:00:00 to put something like 17:00:00
8- Click away
9- The time resets back to 00:00:00
So my question is how do I have to setup the field in the univers so that we can query on the time using the univers in Live Office. I say Live Office because in WEBI, it works fine. Changing the 00:00:00 to something else doesn't make it reset to 00:00:00 when you click elsewhere.
Trying with Field 1 and 2 does the same thing.
Purpose of this is to be able to filter on parts of the day, like am (8am to noon) and pm (1pm to 5pm).
BOXI 3.1 SP3
Windows Server 2008 R2
Netezza database
Live Office 3.1 SP3 (Client)
Excel 2007 (Client)
Windows 7 (Client)
Thanks,
Edited by: Sing Phommavong on Feb 23, 2012 11:24 AM

Hi n,
please search for your problem in the forum. This has been discussed a lot of times before! (keywords: Excel LabVIEW timestamps)
Excel stores timestamps as number of days (your 41866) and part of days (0.5798d = 13H55M). You need to convert those numbers using some (more or less) simple math to LabVIEW timestamps!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Showing Keyfigures error for result and overall result in the Query output

Hi All,
when executing query results show correct figures for qty & value but with ERROR instead of uom(Unit of Measurement) & currency;
Can anybody help?
Rgds,
C.V.

Hi There,
Try checking that the particular UOM and currency u are reporting is loaded into BW or not.
hope it helps,
Regards,
Parth.

"filter" in Planning and 'characteristic restriction" in the query??

Similar Messages

Maybe you are looking for