Filter ip addresses from access logs of Directory Proxy servers

Hi,
I have a network loadbalancer before 2 DPS instances (v6.3.1) and the network loadbalancer probes the 2 instances every 3 seconds.
In orther to avoid spamming of the access logs I would like to filter every connection from those ip addresses from writing in the access logs.
Is this possible without having to modify the log level, since I need the connection INFO for statistics and/or impact analysis operations.
regards,
Vincent

Hello,
Many customers use F5.
However, there is no mechanims at the LDAP protocol level to carry initial client IP address down to the ultimate server
-Sylvain
When closing a thread as answered remember to mark the correct and helpful posts to make it easier for others to find them

Similar Messages

  • Missing IP addresses from access.log

    We are running W/L 5.1 sp8 on Linux. JDK 1.3_01. There are no incoming IP
    addresses in our logs -- any ideas?

    http://www.weblogic.com/docs51/admindocs/http.html#logs
    Adrian Blakey <[email protected]> wrote in message
    news:3aa03f88$[email protected]..
    We are running W/L 5.1 sp8 on Linux. JDK 1.3_01. There are no incoming IP
    addresses in our logs -- any ideas?

  • How can I exclude client IP address from access log using WebServer 6.0? WebServer 3.x has Do not log client accesses from: option under Log Preferences". But I cant find it when we upgrade to 6.0

     

    Hi,
    Please go through the below link.
    http://docs.iplanet.com/docs/manuals/enterprise/60sp1/ag/esmonsvr.htm#18110
    I hope this helps. If you need any help let me know.
    Regards,
    Dakshin.
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support.

  • SDP-25108: One or more addresses from Access Point {0} is already registered by another application.

    We create  SOA Project which use  UMS Adapter to notify any  incoming Email
    and i received this issue  in soa server "
    [sdpm/ReceivingQueuesInfo=OraSDPM/QueueConnectionFactory:OraSDPM/Queues/OraSDPMAppDefRcvQ1, Principal=<ANY>, AppInstanceName=null, Delegate=null, AppName=default/Project2!1.0, ClientVersion=11.1.1.7.0, ClientType=POJO].
    [2014-04-23T22:02:17.619+03:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application]  UMS Adapter AccessPoint : [email protected]
    [2014-04-23T22:02:17.624+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application]  UMS Adapter UmsEndpoint.registerUmsAccessPoints(..) - Error duing registering access points..
    [2014-04-23T22:02:17.625+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application]  UMS Adapter
    [2014-04-23T22:02:17.627+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application]  UMS Adapter Error during ums adapter endpoint activation
    [2014-04-23T22:02:17.629+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application]  UMS Adapter [[
    javax.resource.ResourceException: oracle.sdp.messaging.NoPermissionException: SDP-25108: One or more addresses from Access Point {0} is already registered by another application.
      at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerUmsAccessPoints(UmsEndpoint.java:260)
      at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerApplication(UmsEndpoint.java:104)
      at oracle.tip.adapter.ums.inbound.UmsEndpoint.<init>(UmsEndpoint.java:97)
      at oracle.tip.adapter.ums.inbound.UmsListenerEndpoint.<init>(UmsListenerEndpoint.java:47)
      at oracle.tip.adapter.ums.UmsResourceAdapter.endpointActivation(UmsResourceAdapter.java:201)
      at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:489)
      at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performEndpointActivation(JCAEndpointActivation.java:666)
      at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:649)
      at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performActivation(JCAEndpointActivation.java:397)
      at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisionRegistry.java:593)
      at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.java:444)
      at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisionRegistry.java:409)
      at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionRegistry.java:334)
      at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisionRegistry.java:140)
      at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:102)
      at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevisionChanged(AdapterService.java:347)
      at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.notifyDefaultRevisionListeners(StandaloneCompositeDeploymentCoordinatorImpl.java:280)
      at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:77)
      at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467)
      at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268)
      at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203)
      at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147)
      at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134)
      at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100)
      at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221)
      at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
      at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
      at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
      at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
      at java.security.AccessController.doPrivileged(Native Method)
      at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
      at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
      at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
      at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
      at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
      at java.security.AccessController.doPrivileged(Native Method)
      at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
      at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
      at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
      at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
      at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
      at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
      at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: oracle.sdp.messaging.NoPermissionException: SDP-25108: One or more addresses from Access Point {0} is already registered by another application.
      at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
      at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
      at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
      at oracle.sdpinternal.messaging.storage.MessagingStore_urkbp2_EOImpl_1035_WLStub.registerAccessPoint(Unknown Source)
      at oracle.sdpinternal.messaging.StoreProxyAdapter.registerAccessPoint(StoreProxyAdapter.java:491)
      at oracle.sdpinternal.messaging.MessagingClientImpl.registerAccessPoint(MessagingClientImpl.java:779)
      at oracle.sdpinternal.messaging.MessagingClientImpl.registerAccessPoint(MessagingClientImpl.java:231)
      at oracle.sdpinternal.messaging.MessagingClientBase.registerAccessPoints(MessagingClientBase.java:120)
      at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerUmsAccessPoints(UmsEndpoint.java:253)
      ... 59 more
    [2014-04-23T22:02:17.630+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: soa-infra] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] JCABinding=>  Project2 Error while performing endpoint Activation: Unable to create Endpoint.[[
    [2014-04-23T22:02:17.632+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: soa-infra] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] JCABinding=>  Project2 [[
    Unable to create Endpoint.
    thanks
    Sameer

    The WAP54G's repeater mode essentially sets up the 2nd access point as an extender of the main (root) access point. Since you will be extending the signal, you will need to configure the same wireless settings on both devices. SSIDs, channels, security settings need to be identical. Do set a STATIC IP address for your APs. If your network allows you to use the default IP (192.168.1.245) of the AP, you may set the 2nd unit to have an IP address like 192.168.1.246. The APs need to be in the same network.
    An essential step in setting up the AP to repeater mode is indicating the main AP's wireless MAC address. This will register the main device to the second AP and will get them to communicate. To get this info, you need to:
    1. Login to the main AP's setup page.
    2. Go to Status.
    3. Click on the Wireless subtab.
    4. Retrieve the MAC address indicated.
    Register this info unto the 2nd AP and Save Settings. You may need to reboot the devices to get the connection going. Once the devices are in sync, the client devices should be getting IP addresses assigned by the DHCP server (your DSL modem). To confirm that your setup is operational, you should be able to roam on the network in a location you would not have network access to without the AP on wireless repeater mode.

  • E-mail address from ACCESS database

    Hello!
    I have created an enrollment form using DW + an Access db.
    On this form the user registers his e-mail address and I
    would like to know how I can generate a newsletter that will get
    this address from the Access database and e-mail to all users
    registered there.
    It is like a monthly newsletter.
    One additional question, if I may.
    The users have filled out a "yes" or "no" question for
    receiving the Newsletter, so all of them have a "Yes" or "No" field
    under the newsletter heading on the database.
    Can anyone point me in the right direction?
    thanks guys!

    How many users do you have on your database?

  • Analytics based on FMS access logs

    Hi,
    We are building an analytics application for Flash Media Server located in a content distribution network. We obtain access logs from the FMS server and use the log entries to display metrics.
    We would like to know if there is any way to determine the cache status from access logs.
    Also, are there any scenarios where a stop event does not follow play event?
    When we monitor the logs, the "x-file-name" field sometimes contains two extensions (filename.flv.flv). Is this the expected behavior?
    We have also noticed that multiple log entries for a single seek action has been generated. Is this an error with our configuration or is this expected?
    Thanks in advance,
    Keerthana

    Keerthana,
    Curious to know if you ever got a workable solution for getting analytics from your media server? Could you share your story?
    Thanks,
    Justin Lee
    Atlanta, Ga.

  • Weblogic access.log when using apache plugin

    Hello,
    If I use the apache plugin with weblogic, what will be the IP address in
    access.log of weblogic ? Will they only be apache's IP ?
    Regards,
    Dom

    Is it possible that Apache itself is doing some url rewriting? I would
    suggest turning on debugging and check what is happening in the wlproxy.log.
    Set Debug ON in the httpd.conf.
    Regards,
    Eric
    "Volker Mader" <[email protected]> wrote in message
    news:3bf29c25$[email protected]..
    >
    Hi all,
    I am using Weblogic 5.1 SP 10 and Apache 1.3.19 on Solaris 7.
    When I am using the Weblogic Webserver on port 7001 the WebLogicSession isinvisible
    (it is a cookie).
    When using the apache plugin on Port 80 I get the WebLogicSession in theurl (not
    very nice).
    I have enabled cookies in my browser in both cases.
    Is there any way to get the sessionid as a cookie again?
    Thanks
    Volker

  • Force archiving of error and access log

    Does anybody know of a way to force the archiving and restart of the errors and access logs in Directory Server 5.2 P4?

    eacardu wrote:
    Does anybody know of a way to force the archiving and restart of the errors and access logs in Directory Server 5.2 P4?you could create a script:
    cp /ds path/logs/access /archive/access.timestamp #archive
    /ds path/logs/access #clears filecp /ds path/logs/errors /archive/errors.timestamp #archive
    /ds path/logs/errors #clears file

  • Directory Proxy not accepting connections

    Hi,
    We are having issues with our Directory Proxy servers 6.3. We recently moved an application that makes a lot of searches to the proxy and we started getting the error below. This causes all bind to fail when we start getting this error. Does anybody have this issue or idea what could be causing it?
    Proxy Access Log:
    [24/Jul/2008:10:09:26 -0500] - CONNECT - INFO - conn=4881366 client=XX.XX.XX.XX:43291 server=xxxxxxxxxxxx:389 protocol=LDAP
    [24/Jul/2008:10:09:26 -0500] - PROFILE - INFO - conn=4881366 assigned to connection handler cn=default connection handler, cn=connection handlers, cn=config
    [24/Jul/2008:10:09:26 -0500] - OPERATION - INFO - conn=4881366 op=0 BIND dn="cn=xxxxxxxxx" method="SIMPLE" version=3
    [24/Jul/2008:10:09:26 -0500] - OPERATION - INFO - conn=4881366 op=0 BIND RESPONSE err=1 msg="Server Error " etime=0
    Error Log:
    [24/Jul/2008:10:09:26 -0500] - EXCEPTION - INFO - Server Error
    Exception thrown from thread Worker Thread 7
    java.lang.NullPointerException
    com.sun.directory.proxy.extensions.FailoverLoadBalancingAlgorithm.getBindConnection(FailoverLoadBalancingAlgorithm.java:965)
    com.sun.directory.proxy.server.BackendSet.getBindConnection(BackendSet.java:453)
    com.sun.directory.proxy.server.LDAPDataView.getBindContext(LDAPDataView.java:555)
    com.sun.directory.proxy.server.BindOperation.processOperation(BindOperation.java:525)
    com.sun.directory.proxy.server.WorkerThread.runThread(WorkerThread.java:150)
    com.sun.directory.proxy.util.DistributionThread.run(DistributionThread.java:225)
    Thanks,
    Federico

    Does anyone have an answer for this? We are seeing the same error.
    Proxy Access Log:
    [21/Aug/2008:11:43:48 -0400] - OPERATION - INFO - conn=282 op=1644 BIND dn="cn=1234,ou=employee,c=company" method="SIMPLE" version=3
    [21/Aug/2008:11:43:48 -0400] - OPERATION - INFO - conn=282 op=1644 BIND RESPONSE err=1 msg="Server Error " etime=0
    Proxy Error Log:
    [21/Aug/2008:11:30:23 -0400] - EXCEPTION - INFO - Server Error
    Exception thrown from thread Worker Thread 53
    java.lang.NullPointerException
    com.sun.directory.proxy.extensions.FailoverLoadBalancingAlgorithm.getBindConnection(FailoverLoadBalancingAlgorithm.java:965
    com.sun.directory.proxy.server.BackendSet.getBindConnection(BackendSet.java:453)
    com.sun.directory.proxy.server.LDAPDataView.getBindContext(LDAPDataView.java:555)
    com.sun.directory.proxy.server.BindOperation.processOperation(BindOperation.java:525)
    com.sun.directory.proxy.server.WorkerThread.runThread(WorkerThread.java:150)
    com.sun.directory.proxy.util.DistributionThread.run(DistributionThread.java:225)

  • What IP load balancers in front of Directory Proxy Server?

    In the highly available topology design, two Directory Proxy Servers sit behind IP load balancers.  What IP load balancers are folks using for this?
    We happen to have F5 load balancers, but I was a bit disappointed to learn that these proxy the connections, and so the initial LDAP client IP address is swollowed up by the F5.  This seems to rob a lot of usefulness in Directory Proxy / Directory Server, not to mention make the DP / DS logs less helpful.  Anyway around this?
    Thanks,
    Amos

    Hello,
    Many customers use F5.
    However, there is no mechanims at the LDAP protocol level to carry initial client IP address down to the ultimate server
    -Sylvain
    When closing a thread as answered remember to mark the correct and helpful posts to make it easier for others to find them

  • Script to pull all connections from one IP out of DPS access logs...

    I need an efficient script to pull all of the connections for 2 IP's (or match the first two octets of the IP will cover both addresses also) from multiple DPS access logs out and write them to a file.
    The current one-liner I've been using doesn't work well with multiple access log files. So I tried combining multiple logs into one access log, and then trying to parse that large log file (around . The problem is, I am now getting the error: "bash: /usr/bin/egrep: Arg list too long", which is because it takes all of the connection numbers and builds a grep with them.
    Here is the one-liner I've been using:
    FILTER='client=192.168.1.1|client=192.168.2.1'; FILE='access.*'; for j in $FILE; do unset CONN; for i in `egrep -h "$FILTER" $j | awk '{print $8}'`; do CONN="$CONN|$i"; done; if [ -n "${CONN+x}" ]; then egrep -h $CONN $j; fi; done | sort -t '/' -k2,2M -k1n
    Is there a faster and more efficient way to pull out all of the connections from one or more IP's in access logs? I would think someone out there would have written something to do this?
    Thanks everyone!!!
    Edited by: keesor on Aug 17, 2011 2:49 PM

    It could be as simple as
    lgrep -O conn <IP> access
    If you have more logs you can cat them and pipe the output to lgrep in a pipeline, like:
    cat access.1 access.2 ... access.n | lgrep -O conn <IP>
    Just make sure that the logs are listed in sequence. The script won't produce reliable results if the log is non-sequential.

  • Getting Client IP address in Webcenter access log files

    In addition to Understanding Webcenter Spaces Access Log File
    I want to trace the IP address of the client machine from where webcenter spaces is being accessed.
    How to capture this?
    Please help.
    -- Navin K

    You can access one of two server logs:
    If you embedded an HTTP Server in front of WebLogic (which is what Oracle recommends), then you have access information in OHS (which is just like Apace).
    If you are using a managed server (or even the admin server) in WebLogic, same thing, different name/place (the http access log).
    same discussions are going on in other thread -
    How to get the IP adress of the user who have accessed Webcenter Spaces ?

  • Accessing a user email address from the database

    Hi,
    I really need help with the following.
    I am adding functionality where users can set reminders that will then be sent to them by email when the reminder is due. I am going to utilise dbms_job to do this. My problem is that I am using apex authentication and users for the rest of the application and I need to retrieve the email address from apex. I cannot use wwv_flow_users as the email will be sent from a job in the database therefore there will be no current logged in user / workspace / session.
    There must be some way of accessing an internal apex table / view or something that can tell me what the email addresses of my users are without being signed into an apex session.
    Please help, this is quite urgent.
    Thank you in advance.
    Lee

    Hi,
    Glad to see that you've found.
    However would be very interesting to know how to retrieve user list without being in an Apex workspace.
    i would do as follows:
    When the first user of the day log into apex you could update a static table containig the email (taken select into from www_flow_user once a day).
    Then via a trigger you could start your batch proc, that needs updated email.
    Is not clean at all, but probably if your firm isn't too big this approach could work.
    By the way if you find how to retrieve the email not using www_flow_user, would be very nice to know.
    Message was edited by:
    Marcello Nocito

  • How does one remove temporary files from Safari?  A friend logged on to her Facebook account using my iMac.  Now I can't remove her e-mail address from Facebook.  It was suggested to me that I try clearing temporary files from Safari but I can't find

    How does one remove temporary files from Safari?  A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6.  Now I can't remove her e-mail address from my computer.  When I open Facebook her address shows in the user button.  I do not have a Facebook account.  It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this.  Are temporary files the same as the cache?  It also was suggested that I try clearing Safari cache.  How do I do that?

    Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

  • My old iphone was stolen. Can I wipe it remotely if I know the IP address from which someone is trying access my accounts?

    I was in Europe last week and was pick pocketed and my iphone 3GS.  Now someone is trying to access my gmail account from Romania.  I was notified by google and given an IP address from where the attempt is coming from.  I have since upgraded my phone, and was only using it as an ipod.  For that reason, I didn't have any security settings (no password).  But, there's quite a bit of personal things on there (text, tons of pictures, etc)  Is there any possible way it could be wiped remotely since I know the IP address where it is located?  I also remember setting up a locate my iphone thing some years back, but have never needed to use it (so it seems some of the information needed may not be up to date).  Seems like I'm SOL if I don't have icloud or whatever.

    Here is a link that explain you the steps http://support.apple.com/kb/ph2701

Maybe you are looking for

  • Adobe Acrobat 11.0.06 Crashing after scan

    Hello I am facing problems esp when using 'Create -> PDF from Scanner ' I am using Cannon MX472 multifunction printer and after it completes the scans I see the scanned pages for few brief second and then it crashes and I have to do the scan all over

  • FV50 modification

    Hi experts, My requirement is that to add customized field in the enjoy screen of FV50. Also, if the user double click the zfield, it will prompt a pop-up screen or direct it to a new screen where in the user will input data as well as saved it in zt

  • SNMP Traps

    Hi there, I'm trying to configure Oracle SNMP on a Solaris 5.9 box. I've followed the instructions on "Note:94313.1". The start_peer script started successfully the following daemons: (1) master_peer (2) encap_peer (3) snmpdx I have also started the

  • Restricting user from taking printout, copying and taking screen shots

    Hi,     In KM,   is it possible to restrict the user with read permission from taking printout, from copying the document, from taking screen shots for a document.     If possible , how to achieve it.     All helps will be appriciated. Regards, Shant

  • Plug-ins not loaded?

    Hi, I'm a CC 2014 user on my Mac. But, we have a PC here in our department that has an old copy of CS4 InDesign on it. It doesn't really need anything newer than that, for the work that's done with it. This PC just got a new hard drive. The old one c