Filter issue in report

Hi can ane one u can tell waths the solution for this I tried useing functions also but its d 'not working, i applied filter also
-- same report two issues
Issue 1
The ‘Final Approver Full Name’ field appears to be returning all approvers rather than the final approver’s. As the field name suggests, it should only be returning the name of the last person to approve the requisition and not all approvers that approved that particular requisition.
ex: I have highlighted Purchase requisition no: 1000000011 as one example it shows allll the approvers but in the report it should show only last approver)
Issue 2
In an attempt to alleviate the above issue we removed the final approver full name field but the amounts were then incorrect. While the lines are no longer duplicated for each of the approvers, it appears that the amount is multiplied by the number of approvers (so line 1 of requisition 1000000011 shows as 2.25 when the amount on line 1 should be 0.75).

Do not duplicate posts
Refer to these links :
http://obiee2go.wordpress.com/2012/06/06/obiee-11g6-analyzing-sales-for-n-years-top-10-sales-reps-over-n-years/
http://obiee101.blogspot.com/2008/02/obiee-aggregate-by.html
Let us know you questions. Mark if helps.!
Thanks,
SVS

Similar Messages

  • Oracle APEX 4.0  -  Interactive Report - Table Column Filter Issue

    Environment: Oracle APEX 4.0  -  Interactive Report - Table Column header Filter Issue
    We have developed an interactive report using Oracle APEX 4.0, which contains a record count of around 3,000 Rows. All the rows values are unique in nature. When we try to filter the same with the help of column header filter option available in the interactive report,We get only 1000 records.
    Could some one help us, why this behaviour under APEX Table Column Header Filter as if it does not display beyond 1000 distinct values.
    Is there a way or workaround on how to get all the records in the column header filter?
    Thanks in advance.
    Krish

    Hi
    Thanks for the advice and this issue has been moved to the below URL
    Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue Posted: No
    Krish

  • Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue Posted: No

    Environment: Oracle APEX 4.0 - Interactive Report - Table Column header Filter Issue
    We have developed an interactive report using Oracle APEX 4.0, which contains a record count of around 3,000 Rows. All the rows values are unique in nature. When we try to filter the same with the help of column header filter option available in the interactive report,We get only 1000 records.
    Could some one help us, why this behaviour under APEX Table Column Header Filter as if it does not display beyond 1000 distinct values.
    Is there a way or workaround on how to get all the records in the column header filter?
    Thanks in advance.
    Krish

    Krish,
    Interactive report has hard coded limit to display 1000 rows of column filter LOV for performance. Unfortunately, the limit cannot be changed. The workaround is to define a Column Filter LOV for the column instead of using "Default Based on Column Type".
    Regards,
    Christina

  • Search/Filter through Interactive Report!

    Hi All,
    First of all WISH a very Happy New Year-2010!!
    In my previous post for Search/Filter through Interactive Report!
    I am facing problem with UI as mentioned below can any one help me out on this, as this an urgent for me...
    At last i was able to was able to retrieve the data from Iframe using different logic!!
    But i want to modify some of the modifications in UI Design..
    As i have informed u that End user always selects the Page-85 which is visible to them..
    In that page(85) i have totally created three regions.
    1. Attribute Report(Intearctive report)
    2. Manage Attribute(HTML where i have give iframe syntax as {iframe ID="Attribute Report" src="" style="width:520;" FRAMEBORDER=0></iframe>
    3. Create/Edit Region
    FYI: There is a create button in Attrinbute Report and when i click on that Button then only i wil display the Create/Edit Region
    Now the problem is end user are using pixels as 1024*756 size, when i have tried to increase the size of width in iframe, the create/edit region is crossing and
    need to scroll down to check the data.
    Let us assume if i had reduced the size of width as default 520 then create/edit region is placed with in pixcels.
    As u know there is a button called as "GetResults" in page-85 when i clik on that button we will call the iframe which is a hidden page where end user
    can not view.
    The main problem is that in that page i mean page-45, it has desgined in such a way that it is similar to page-85 which is having with all 3 regions!!
    When it will display the report from iframe for that the scrolloing is displayed, and when i had click on create button in that iframe the credit/edit region is
    displayed but for that there to scroll down which is not happy by endsuer.
    In order to overcome this i had tried to increase the width in iframe which is working for one not for the other or viceversa.
    Suggestion: Can u suggest me how to fix the pixcels so that it will not excceds the pixecls size?
    What i had thought is in page-85 i have created totally 4 regions instead of 3 regions as shown below:
    1. Attribute Region
    2. manage Attribure(With Iframe)
    3. manage Attribute(With out iframe but used one hidden varibable ans set that hidden in condtional region)
    4. Create/Edit Region.
    And i am setting that hidden variable in Create button, so that i can call the second manage attribure with iframe.. When i have tried to use that it is throwing script error as "style is null or nor an object", i belive scince we are hidinng that region it migh not able to identify that style!!!
    Can u suggest me the way i have done i had implemenetd is sounds goods for u? Or else can u help me out how to fix that UI design issue...
    Thanks in advance,
    Anoo..                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hi Andy,
    As per your suggestion i have created two pages!. One is 85 page and 45 page, but foe enduser can see only the 85 page.
    In 85 page i have created a interactive report as shown below:
    SELECT distinct attr_code "EDIT", attr_code, attr_description, attr_atcl_code,
    attr_abbreviation,
    attr_include_short_desc "Include short desc",
    attr_include_long_desc "Include long desc",
    attr_attr_type "AttrType", attr_code "DELETE"
    FROM t_append WHERE EXISTS (SELECT 1
    FROM APEX_APPLICATION_PAGE_IR_COND
    WHERE APPLICATION_ID = :APP_ID
    AND PAGE_ID = :APP_PAGE_ID
    AND CONDITION_ENABLED = 'Yes'
    AND APPLICATION_USER = :APP_USER) ORDER BY attr_description;
    In the same page itself i have created a One more region, where i have one select list and submit button, when there select fro the list and click on submit button then popup should fired, i mean what u have mentioned. For that i have created a new page called 45 where i have two regions one is HTML region and second is interactive report.
    I html region i have given like this in source
    <iframe src="f?p=&APP_ID.:85:&SESSION." style="width:500; height:1000;" FRAMEBORDER=0></iframe>
    but i am not able to see the template at all?
    Pls correct i way i have done is correct or not.
    Also i was not able to see the Region as - Popup one ( where i can see the popup option?)
    Thanks,
    Anoo..

  • I am having a major issues to report machine -G6 series

    Hi. Team
                    This is a serious customer issue that I have to report .I am Owning an HP G6 series laptop. After 7 months of purchase I am facing lots of issue with this. The system is getting stucked sometimes and the controllers  of Keyboard and mouse are not working, While the time of boot up it is making big noise. All these issues I have reported to authorized service center of HP Maha electronics(Cochin).And the engineers over there observed the issue and replaced my hard disk two times. But the fact is like I am still facing the issue. Till today I have given two times to authorized HP service center (Maha electronics )Cochin. Days after the second time repair I had gone to US and I was unable to report the issue for the third time. I recently came to India and I have reported the issue in HP authorized service center (Maha Electronic)Bangalore. But by that time I came to know that my machines warrantee got over.And they neglected my request saying it cannot be done under warrantee.
                    Team, Please think that I have reported the problem during the time of warrantee itself, And your engineers couldn’t able to repair it properly to me.Frankly speaking, They have kept my laptop more than weeks under their custody for observation. But they were failed to find out the root cause of the issue. The folks reading this mail might be thinking that this issue can be, Now because of damage of some other stuff, but it’s absolutely no, Why because, You folks can check the description of the problem with the laptop during my first repair visit(Check the slip’s issue’s reported description) With this serial no([Personal Information Removed]).And still they are not specific about the root cause. This was happened mainly in (Maha Electronics)Cochin. They are not specific about the issue changing all parts by parts without any logical sense.
                    Folks, Act sensibly to your customer. It’s because of deep sadness I am saying these words. I was having 100% trust with your product(HP).But Now ,if anyone ask me about to which laptop to go with, I am having no words to tell them. How can I believe your engineers and give my words to my fellow beings.
    Thanks And Regards.
    Nijil [Personal Information Removed]

    Sorry to say we folks are not HP employees and have no access to your service records so there is not much help we can provide other than moral support

  • Issue in Report output

    Issue in Report output
    I am facing strange issue. I have created a BEx query and Executed in Bex analyser. In this output I can able to see * mark as values instead of KF.
    Anyone can help me in this.

    hi,
    can you use NODIM functionality and see .
    Ravi

  • Font issue between Reports Designer and Report Output

    Hi.
    I've succesfully migrated several reports from 6i to 10g (10.1.2.0.2) with and without parameter form. However, I have the following font issue:
    - When report is run from Reports Designer, font is kept.
    - When report is run from a forms module (through rwserver on the same machine, that is not really from an application server, but using Oracle BC4J or Developer Suite enviroment) the report output is different. In this case a bigger font is displayed and occasional truncation happens for some fields.
    The question is: How can i avoid this difference in font behaviour?. Is it font.ali related?. How come this happen on the same machine(Windows XP)? These reports are to be deployed on Linux, where reasonably, and font machine is expected to happen.
    Font used: Arial (Occidental) 9

    this might be an issue with the printer that is associated also, and the permissions to the printer that you might have..
    login to the application server machine and restart the reports server as an admin..try running the reports via the URL..i have a feeling that this issue might be somethiing to do with the permission(s) to the printer from your AS machine

  • 0calweek issue for report output

    0calweek issue for report output
    I have loaded 0calweek in  my infosource.0calweek format is displaying  differently
    in the report
    File : 12005
    PSA   :12005
    ODS  : 012005
    Cube : 012005
    Report: 05/0120
    I am loading first to PSA -> Process Manually to ODS -> Cube
    I am using 0calweek is SAP Provided object.I am not doing anything in the 0calweek
    Please advise on this.
    Advance Thanks

    I solved this issue. I changed the layout everything seems to working now.

  • Issue with report RBDMIDOC

    Hi Gurus,
    I have an issue with the report RBDMIDOC. When I run it to the message type MATMAS, it takes 8 or 9 seconds to send the IDoc. With the message type CLFMAS takes 3 seconds.
    The duration of the execution of this report depends only of the access to the BDCP and BDCPS tables or is there any other factor that has influence on this time?
    The BDCPS table has 300000 entries, and is well indexed.
    What could I do to reduce this time?
    Thanks and regards,
    Manuel Míguez.

    [Duplicate Post|Issue with Report RBDMIDOC;

  • Issue with report Y_DEV_82000038 P & L by period plan.

    Hi,
        It seems we are having an issue with report Y_DEV_82000038. When we are executing this report then in the output for one line item it is showing one value and when we drill down it it is shoiwng double value of what it is showing in the initial screen of output.
    Regards

    Hi,
    The reports with 'Y' or 'Z' are not standard ones. You have to check with the person who developed this report. Ask to your ABAP team to help you.
    Regards,
    Eli

  • Issue With Report Builder After Installing SP3 for SQL 2008 R2

    Hello.  We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend.  You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
     Application url   :
    http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
    IDENTITIES
     Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
     Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
    APPLICATION SUMMARY
     * Online only application.
     * Trust url parameter is set.
    ERROR SUMMARY
     Below is a summary of the errors, details of these errors are listed later in the log.
     * Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
      + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
     No transaction error was detected.
    WARNINGS
     There were no warnings during this operation.
    OPERATION PROGRESS STATUS
     * [10/15/2014 9:35:56 AM] : Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
     * [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
     * [10/15/2014 9:36:29 AM] : Installation of the application has started.
     * [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
     * [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
    ERROR DETAILS
     Following errors were detected during this operation.
     * [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
      - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
      - Source: System.Deployment
      - Stack trace:
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
       at System.Deployment.Application.ComponentVerifier.VerifyComponents()
       at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
    notification, DownloadOptions options)
       at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
       at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
       at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
       at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
    COMPONENT STORE TRANSACTION DETAILS
     No transaction information is available.

    Hi DMcGarveyt,
    This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
    Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Issue with Report Links in OBIEE

    I'm facing a issue with report links(modify,printer friendly,refresh etc) in obiee
    The reports which are set as "Display Results-->Embedded in Section" for those reports if I put report links(modify,printer friendly,refresh etc),the links do not show up.In the palce of link I can see "-"(minus sign) appearing.
    If I change the report to "Display Results--->Show as link in seperate window" the lniks show up fine.
    Any idea why this is happening?
    Your suggestions are welcome.
    Please help
    Regards.
    Edited by: 810008 on Apr 14, 2011 1:39 AM

    Edit Dashboard -> Report Properties -> Report Links... (directly under Display Results) -> Customize
    M.

  • Clear Filter on Interactive Report

    I created an application in Application Express 4.2.0.00.27.  Four of the pages have interactive reports.  I applied the filter to the report on page 46 to show only rows with LAST_NAME LIKE ‘%JONES%’ and the rows are filtered correctly.  When I navigate to the calling page 12 and then back to page 46 the filter is still in effect.  The clear cache on the calling page 12 is checked.  Is there a property of the page or report which will clear the filter on page 46? 

    See Linking to Interactive Report in the documentation.
    To reset an interactive report in a link, use the string "RIR" in the Clear-Cache section of a URL. This is equivalent to the end user choosing the Reset option from the interactive report actions menu on the target page. The report is returned to the default report settings specified by the developer or saved by the user.

  • Enhance GRC issue status report columns

    Hello GRC Gurus
    I am new to GRC application and I have a requirement to enhance u201CIssue Statusu201D report  fields.
    Process:
    Goto -> Report Center - > "Issue status" Report -> run based on the condition. It will display ll the issue report in a ALV table formate with the columns
    Organization     Subprocess      Control       Issue     Ectu2026(As configured in SPRO)
    But my requirement is to add a Custom additional Field to the ALV table report:
    Is there any enhancement to add the custom field in to the report  and implement  logic to populate data to the same?
    Kindly let me know your comments.
    Thanks you ,
    Regards,
    Magesh
    Edited by: mageshB on Dec 28, 2010 6:10 AM

    Yes, of course.
    Kindly look into the view cluster:
    VC_GRFNREPCOLUMNSC - Reporting: Customizing of report columns
    VC_GRFNREPCUST           - Report: Customizing

  • Filter Issues in P6.2.1

    I am facing filter issues in P6.2.1. I used the customized filter for "Planned but Not Started". Below shown were the combination i used to create the filter. but when i run the filter no activities were shown under WBS, i mean empty WBS
    1. Early Start - within a range of - PS - DD
    Activity Status - Not Started.
    2. Early Start - less than or equal to - DD
    Activity Status - Not Started.

    Hi,
    My feeling is that perhaps you don't have any task that is late.
    If not, please try following filter:
    Start is less than or equals to DD
    Activity staus not started yet
    I hope it helps.
    Regards,
    Younus

Maybe you are looking for