Filter Key Word - Mobile Me email

How do I filter key words in my mobile me account?
I have sent more DISH emails to my junk folder but they have a seperate email account each time. I would like to filter the word "DISH" for any future incoming emails.
Thank you in advance.

hmmm, I can only assume we can not establish junk mail policy / filter in mobile me by a keyword?
Is there a place I can go so I can make a suggestion?

Similar Messages

LR mobile key wording

In addition to adding stars and color labels, adding key wording would be very helpful. For my workflow, key wording is more important than the stars and colors.
Thanks for listening.

This a user to user forum.
Feature requests should be made here: http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om either by adding your vote to an existing feature request or, if none exists, creating one.

CRES encrypted mails even without the 'key' word

Hi
We have CRES enabled, and it does send out encrypted mails when we type in our "key" word in the subject or body.
The issue is at times, when the selected user sends non-encrypted mails, the subject and the body of the email does not contain
any of the "key" words, it even then encrypts the mail and sends it accross.
We have observed this for a couple of users, so we removed these users from the Allowed list of users, who can encrypt their email,
and re-inserted these users to encrypt, the mail, it works fine for them now.
But now again another set of users are complaining of the mails being sent out as encrypted, thought they are not having any
"key" words that are needed to send out the mail as encrypted.
Any one faced this kind of issue or any work around for this, kindly advise.
Regards,
Tauseef

Hi Tauseef,
I would recommend you to use the Message Tracking so you can understand the message flow. The message is probably triggering the Encryption action.
You could also use the Trace feature at:
System Administration -> Trace
So you can simulate a message and how the Cisco ESA will handle the message.
If you are not confortable sharing the config (policies/filters) and the tracking in the forum, I would suggest you to open a TAC ticket so an Engineer can assist you identifying what is causing the message to be encrypted.
I would say your Cisco ESA will not encrypt the message without a clear command to do so. The only question remaining is what is causing the action to encrypt to be triggered. I believe you know, but action can be triggered in a message filter, in a content filter and in a DLP policy. There is another option, using the Plug-in for encryptign the message locally but since you did not mention this, I am guessing this is out f the list. I would recommend reviewing the configuration and the message tracking data. That way you can determine what is causing the messages to be encryted.
If you need further assistance from the forum, please share more data.
I hope this helps.
-Valter

How can I filter or block foreign language emails or email addresses

How can I filter or block foreign language emails or email addresses??
TIA
C

Most email clients have a provision to create a 'rule'. The rule examines the email as it is received. In generally you can search for specifically senders, recipients,subjects, or specific content words in the body. Based upon the findings of the rule, you can do something with the email (such as end it directly to the Trash).
For example if you know where all of valid you emails come from, you can create a rule that checks the from field for an acceptable sender and sends those email's that to the inbox, while sending all emails from other senders to the trash or spam folder
Keeping out foreign language emails is often difficult because because often it is difficult to come up with a rule that will catch them on the basis of language they are written in.
There are also commercial products that can scan incoming email and 'score' the email based upon content, and you decide at what 'score' you want the mail sent straight to the trash or spam folder. Verizon's spam filter does this based upon Verizon's scoring system, and actually does catch a lot of spam. It also occaisonally catches things that are not spam however....
Hope that is helpful

My word, pages and email has become unstable any suggestions?

My word, pages and email has become unstable any suggestions?
This happens during the creation of email or word/pages documents.

Try starting in Safe Mode and see if the problem still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+).

Java reserved key words method

Is there any built in method in java that take a string as an argument and returns a boolean depending on whether the passed strig is a java reserved key word or not. for eg..if string such as "public", "class","int"..etc is passed to such a method then it returns true...I would appreciate if someone could help me out with this one..my email is [email protected]

not as far as i know. but it should not be a great prob to write this method on your own. a quick search brought me to that url:
http://java.sun.com/docs/books/tutorial/java/nutsandbolts/_keywords.html
so, now its really easy to write this method, isnt it?

I want to email a Pages document as a Word doc. I used to be able to do this by clicking on share then send via mail then on Word and an email would appear with my word doc attached. Now the email does not come up. Why?

I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached. Now the email does not come up. Why?

It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
If that doesn't help, you may have better luck if you ask in the Pages forum:
Pages
When you repost, be sure to include full details about your versions so that people know what it is you're working with.
Regards.

I'm having a problem sending a word doc via email. I have Mac for Office 08, when I save the document as a .doc or .docx, and send it to someone, they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon. How do I fix?

I'm having a problem sending a word doc via email. I have Mac for Office 08, and I'm using Mavericks OS. When I save the document as a .doc or .docx, and send it to someone, (doesn't matter if its safari, chrome or firefox or on my yahoo or gmail accounts) they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon and I can read it. How do I fix?

I suggest you post on the Microsoft Mac forums since it's their software you're having issues with.
http://answers.microsoft.com/en-us/mac

Can I merge my iCloud email account with my mobile.me email account?

Can I merge my iCloud email account with my mobile.me email account?

Are the usernames the same - e.g. is it [email protected] and [email protected] or is it [email protected] and [email protected]?
If the former, they are the same thing, part of the same account, and deliver into the same inbox.
If they are different then either
a) One of them is an 'alias' on the same account and delivers into the same inbox, or
b) You have two separate iCloud accounts.
In the latter case you cannot move an address from one account to another; in the other cases they are already 'merged'.

Is there a way to create a custom shortcut key to paste my email address? I would like to be able to press a key combination that will paste whatever I set it to, i.e. my email address.

Is there a way to create a custom shortcut key to paste my email address? I would like to be able to press a key combination that will paste whatever I set it to, i.e. my email address.

There are multiple ways to do similar things. One, built into the system, is to use text replacement. See:
http://www.tuaw.com/2009/12/31/mac-101-making-text-replacement-work/
There are other programs you can buy that can do the job in different ways, such as TextExpander. You could also just create a clipping file by dragging your e-mail address to somewhere like the desktop, and then you can simply drag that file to wherever you like to insert your e-mail address there.

Creating Materialized View with the Distinct key word

Hi
I need help to create Materialized View with the Distinct key word.
my query is
select distinct col1, col2 from t1;
is there any alternate of DISTINCT because I can not refresh the MV as fast on demand if I am using it and Fast on Demand is a must for me.

hi
check out this link
http://download-west.oracle.com/docs/cd/B12037_01/server.101/b10736/basicmv.htm#i1007299
http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/intro.htm#sthref183
hope this helps
CHeers

A word document was emailed to me. I can open the document without a problem. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.

A word document was emailed to me. I can open the document without a problem on my iPad 2. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.

If you want to edit a word document then you will need an app on your iPad that supports word so that you can copy them to it via 'open in' e.g. Apple's Pages app or a third-party app such as Documents To Go or QuickOffice HD

Mac: When I click on a misspelled word in the body of an email the spell checker defaults to first word in the email even if it already spelled correctly

The spell checker identifies incorrect spelled words, however when I right click or control click the word the spell checker only highlights in yellow the first word in the email and gives a dialog with the spelling and definition even though that word already correctly spelled. This is version 33.1 on my mac desktop running 10.10. Spell checking works properly if I use Safari.

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

What is use of LOAD key word in ABAP-HR

what is use of LOAD key word in ABAP-HR?

Hi,
LOAD keyword is used to load all the parameter values.
Basic form
LOAD REPORT prog PART part INTO itab.
Variants
1. LOAD REPORT prog PART 'HEAD' INTO itab.
2. LOAD REPORT prog PART 'TRIG' INTO itab.
3. LOAD REPORT prog PART 'CONT' INTO itab.
4. LOAD REPORT prog PART 'DATA' INTO itab.
5. LOAD REPORT prog PART 'DDNM' INTO itab.
6. LOAD REPORT prog PART 'DATV' INTO itab.
7. LOAD REPORT prog PART 'SELC' INTO itab.
8. LOAD REPORT prog PART 'STOR' INTO itab.
9. LOAD REPORT prog PART 'LITL' INTO itab.
10. LOAD REPORT prog PART 'SYMB' INTO itab.
11. LOAD REPORT prog PART 'LREF' INTO itab.
12. LOAD REPORT prog PART 'SSCR' INTO itab.
13. LOAD REPORT prog PART 'BASE' INTO itab.
14. LOAD REPORT prog PART 'INIT' INTO itab.
15. LOAD REPORT prog PART 'DATP' INTO itab.
16. LOAD REPORT prog PART 'TXID' INTO itab.
17. LOAD REPORT prog PART 'COMP' INTO itab.
Effect
Loads the specified part of the generated version of the program prog into the internal table itab (for analysis purposes only).
The return code value is set as follows:
SY-SUBRC = 0 The load for the program prog exists and is current.
SY_SUBRC = 4 The load for the program prog does not exist.
SY-SUBRC = 8 The load for the program prog exists, but is not current. In some cases, this SY-SUBRC may mean that the program load has been destroyed. You can resolve this by generating the program. With PART 'LREF' , SY-SUBRC = 8 means that the line reference table is incorrect for the program. With PART 'CONT' , it means that the reference part of the internal table is empty.
itab has been filled only if SY-SUBRC = 0 .
Reward points if useful.
Regards,
Sekhar

How to translate the key words in ABAp program from lower case to upper cas

How to translate the key words in ABAp program from lower case to upper case?

Hi Kittu,
You need to set the Pretty Printer settings to achieve key words in ABAP program from lower case to upper case.
Utilities -> Settings -> Pretty Printer (tab) -> Select third radio button.
Thats all.
<b>Reward points if this helps.
Manish</b>

Filter Key Word - Mobile Me email

Similar Messages

Maybe you are looking for