Filter Module Interface Error, Lockup

Well, I found another issue(s) with the latest Photoshop. Incompatible plugins, lie Topaz Denoise from Photoshop 5.5, bring up an error dialog (problem with the filter module interface) which cannot be cleared with a click or a key press, rather, it just locks the program, requiring a force quit. Error handling can be more robust.

Contact Topaz for updates to fix the bugs in their plugin.

Similar Messages

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Can't use certain filters- "problem with the filter module interface"

Hello,
I frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed. Any recommendations on how to fix this? Is it possible to undo the update?

Usually this means a bug in the third party plugin that you are using.

When ever i try to use magic bullet looks it says that it could not complete the command because of a problem with the filter module interface what do i do to fix that please help

i dont know what the problem is everything else works my photoshop runs really well its just when i try to use magic bullet looks then it gives me the error message

Contact Red Giant and see if they have an update to the plugin that fixes the bugs in the plugin that are preventing it from working correctly.

CS2 Scanning Problem - error with acquisition module interface

Hi there,
I have an Epson Perfection 4180 scanner which has worked for years. I moved, plug everything back in, the scanner works one time, and from then on, I get this error: "Could not complete the Import command because of an error with acquisition module interface."
I've searched around, and seen others with this problem, but, no real solution. From what I've read, it's a Photoshop issue. I've downloaded the TWAIN drivers and re-installed the scanner, and deleted Photoshop's preferences file. The scanner does work through the Windows Scanner Wizard. I've turned off the Windows Image Acquisition thing in the control panel, and then turned it back on.
ARGH, I am really pulling my hair out. Please help!
Thanks so much!

I'd try to avoid the hassle of messing with the PS installation if possible.
One other thing I have seen is to temporarily disable the Twain plug-in, with a ~ in front of the name, in
C:\Program Files\Adobe\Adobe Photoshop CS3\Plug-Ins\Import-Export

CS5 error message - file-format module interface

First post - sorry if it's not in the best place. CS5 has suddenly fallen over with the following error message when trying to open a raw file (.CR2 / 5DII), which it could open previously:
"Could not complete request because of a problem with the file-format module interface".
Googling has not produced much at all on this topic, and none of it helpful.
Any thoughts on this please?

Thanks for getting back to me. I've made a little progress. It seems that my usual identity is corrupted, or is being affected by PS crashes, which are crashing the DDE server window and also preventing some other applications (such as Adobe Acrobat Pro 9 and even Internet Explorer) from running in that identity too. If I close and restart that identity, it's fine again as long as I don't even open PS.
So I created a new identity just to see if PS would run OK there, and it did, for about 4 hours, but then errors started to recur, such as 'PS has encountered an expected problem and needs to close....' when opening raw files. As I'm trying to finish off editing a set of wedding photos, this is a pain.
I'll try reinstalling PS, but I suspect the problems I'm seeing may be due to a lack of resources. So, reluctantly, I'm thinking it may be time to replace my faithful and carefully maintained Pentium 4 running XP, and enter the dizzy world of 64-bit. One issue may be installing CS5 on a new machine, since I only have an upgrade disk, having migrated all the way from a full copy of PS6, via a CS2 upgrade. I understand that it would be wise to go for Windows 7 Pro, which contains an emulation of XP and therefore allows older 32-bit software to be installed. Any other points to consider?
By the way, your suggested search for the file 'camera raw.8bi' turned up two versions - the CS5 one, and the older CS2 file.

Module import error in pygame when playing midi

I am wondering whether the packaging of the latest version of pygame, 1.9.1, is complete. When running the midi example i get a module import error.
python -m pygame.examples.midi --list
Traceback (most recent call last):
File "/usr/lib/python2.6/runpy.py", line 122, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "/usr/lib/python2.6/runpy.py", line 34, in _run_code
exec code in run_globals
File "/usr/lib/python2.6/site-packages/pygame/examples/midi.py", line 820, in <module>
print_device_info()
File "/usr/lib/python2.6/site-packages/pygame/examples/midi.py", line 25, in print_device_info
pygame.midi.init()
File "/usr/lib/python2.6/site-packages/pygame/midi.py", line 71, in init
import pygame.pypm
ImportError: No module named pypm
I have timidity installed and running as a daemon. pmidi and vkeybd work fine.

Hi djszapi,
Sorry for not replying earlier.
The output should be something like this:
python -m pygame.examples.midi --list
0: interface :ALSA:, name :Midi Through Port-0:, opened :0: (output)
1: interface :ALSA:, name :Midi Through Port-0:, opened :0: (input)
2: interface :ALSA:, name :TiMidity port 0:, opened :0: (output)
3: interface :ALSA:, name :TiMidity port 1:, opened :0: (output)
4: interface :ALSA:, name :TiMidity port 2:, opened :0: (output)
5: interface :ALSA:, name :TiMidity port 3:, opened :0: (output)

CU65 Variant Function cannot be released - check function module interface

Hi ,
Getting this error while Releasing the variant Function in CU66. Function Module trigerred by this function is of the same name as well as correctly acitvated and released , but while releasing the Function I get this error : 'Function cannot be released - check function module interface' . Following are two characeteristics that are maintained in the variant function :
1. Customer_Type
2. Maintenance_Contract
While executing the Function Module alone I get Raise Inernal Exception i.e it is not identifying the argument name 'Maintenance_Contract' in the FM 'CUOV_GET_FUNCTION_ARGUMENT' exception
Below is the code for reference . Pls point out if any mistakes :
""Local Interface:
*" IMPORTING
*"     REFERENCE(GLOBALS) TYPE CUOV_00
*" CHANGING
*"     REFERENCE(ZQUERY) TYPE ZQUERY
*"     REFERENCE(ZMATCH) TYPE ZMATCH
*" EXCEPTIONS
*"      FAIL
*"      INTERNAL_ERROR
" Data Declaration
DATA : l_main LIKE CUOV_01-atwrt,
         l_cust LIKE CUOV_01-atwrt.
" Get value of Input Characteristic Maintenance Contract
call function 'CUOV_GET_FUNCTION_ARGUMENT'
    exporting
      argument            = 'MAINTENANCE_CONTRACT'
   IMPORTING
      SYM_VAL             = l_main
    tables
      query               = ZQUERY
    EXCEPTIONS
      ARG_NOT_FOUND       = 1
if sy-subrc <> 0.
RAISE INTERNAL_ERROR.
endif.
" Get value of Input Characteristic Customer Type
call function 'CUOV_GET_FUNCTION_ARGUMENT'
    exporting
      argument            = 'CUSTOMER_TYPE'
   IMPORTING
      SYM_VAL             = l_cust
   tables
      query               = ZQUERY
    EXCEPTIONS
      ARG_NOT_FOUND       = 1
if sy-subrc <> 0.
RAISE INTERNAL_ERROR.
endif.
   IF l_main EQ 'NO'.
    IF l_cust EQ 'CURRENT'.
      l_cust = 'NEW'.
    ELSEIF l_cust EQ 'VAR CURRENT'.
      l_cust = 'VAR NEW'.
     ENDIF.
     ENDIF.
" Set value for the output characteristic
     call function 'CUOV_SET_FUNCTION_ARGUMENT'
       exporting
         argument                      = 'CUSTOMER_TYPE'
         vtype                         = 'CHAR'
         SYM_VAL                       = l_cust
       NUM_VAL                       =
       tables
         match                         = ZMATCH
       EXCEPTIONS
         EXISTING_VALUE_REPLACED       = 1

ZMATCH and ZQUERY are two table types created in SE11 , both of type CUOV_01.

Interface errors (crc, in/output, collisions etc.) via snmp

Hi,
I'm trying to understand how to get interface errors via SNMP. I do get stats via SNMP for ifInErrors / ifOutErrors etc, but I'm trying to get output via SNMP for the errors visible via the 'sh int x' command - CRC errors, input / output errors, collisions, runts. giants etc.).
1) The SNMP ifInError / ifOutError seems to give an overall counter of all errors from the time the device has started - Am I correct about this?
2) Is there any way I can get the interface-specific errors noted above via SNMP?
Thanks,
Mario

Depends on the device and version of code, but most likely you will get what you want from the CISCO-IF-EXTENSION-MIB. Look at objects like cieIfInRuntsErrs, cieIfInGiantsErrs, and cieIfInFramingErrs. You will also get some ethernet-specific errors from the ETHERLIKE-MIB.

Interface errors

Is there an script that can monitor interface errors (input and output errors) and send an email out when it reaches threshold?
Thanks
Sent from Cisco Technical Support iPhone App

Sure. Here's an example:
event manager applet error_monitor_GigabitEthernet0/1
event interface name GigabitEthernet0/1 parameter input_errors entry-op ge entry-val 5 entry-type increment poll-interval 10
action 2.0 cli command "enable"
action 3.0 cli command "show int GigabitEthernet0/1 | inc error"
action 4.0 mail server 10.1.1.1 from [email protected] to [email protected] subject "Errors on interface GigabitEthernet0/1" body "
Interface GigabitEthernet0/1 has seen $_interface_delta_value input errors in the past 10 seconds: $_cli_result"

Open DeviceNet interface error when TestStand call VIs of NI PCI-8532

Hello,
We use NI PCI-8532 was used as DeviceNet master to do functionality test with a slave (AC Drive).
But when open DeviceNet interface, it happen the error.
We can't find the solution and hope to find help from you.
The basic sequence in TestStand is:
1). Call "Open DeviceNet Interface.vi" to open interface and creat interface object.
Interface(master) setting: interface name=dnet0, MAC ID=0, baudrate=125000bps
2). Call "Open DeviceNet IO.vi" to creat DeviceNet IO object.
Device(slave) setting: MAC ID=63
3). Call "Operate DeviceNet Interface.vi" and operation code=start
4). Call "Wait For State.vi"
5). Call "Read DeviceNet IO.vi" to read data from IO object
6). Call "Close Object.vi" to close IO object handle
7). Call "Close Object.vi" to close interface object handle
Remark, these DeviceNet VIs locates at "C:\Program Files\National Instruments\LabVIEW 2012\vi.lib\DeviceNet\VIAPI".
First time to run sequece in TestStand, it can pass to run step 1) to open DeviceNet interface.
But once there is some error with these steps, and it will happen "Open DeviceNet Interface" error (error code=0xBFF62006) when run these steps again.
Then even use LabVIEW DeviceNet example to test, and it happen the same error except restart computer.
The DeviceNet example locates at "C:\Program Files\National Instruments\LabVIEW 2012\examples\NI-Industrial Communications for DeviceNet\Basic Examples\PXI & PCI\MixedCommunication.vi".
Some information more:
PC operate system: Windows XP SP3
LabVIEW version: 2012 SP1
TestStand version: 2012 SP1
PCI 8532 driver version: 2.3.0
Other installed PCI board: PCI 8531 CANOpen

The following errors may be resolved by resetting the CAN, DeviceNET or LIN device:
Error -1074388986 occurred at ...
NI-CAN: (Hex 0xBFF62006) The object is already open in another application. Solutions: Ensure that only one application at a time uses an object , and that you close all objects prior to exiting your application (don't use LabVIEW toolbar's Abort button).
Error -1074388969 occurred at ...
NI-CAN: (Hex 0xBFF62017) This attribute's value must be provided prior to the Open. Solutions: Set the attribute using the Config function before the Open, and do not set the attribute at any later time; Do not configure multiple CAN Objects for the same ID.
SO,you should reset the DeviceNet.
And another similar issue can explain some points of your problem http://digital.ni.com/public.nsf/allkb/7D9383E9BEAD0B21862571640002F687?OpenDocument

Can't burn CD's - "Interface error 5"

Hello, I haven't used my old firewire LaCie CD burner (LaCie 1394, blue front with the slide out tray) in a while but recently I needed to put some graphics files on a CD. The sw I'm using is Toast 6. No matter what I tyry to do I get the following message: "Interface Error: 5 The connection is not stable"
I tried different CD brands, no effect.
This is the setup.
Machine Name: Power Mac G4 Cube
Machine Model: PowerMac5,1
CPU Type: PowerPC 60? (1.1)
CPU Speed: 1.3 GHz
L2 Cache (per CPU): 512 KB
L3 Cache (per CPU): 2 MB
Memory: 1.25 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1
System Version: Mac OS X 10.4.2 (8C46)
Kernel Version: Darwin 8.2.0
Looking for answers I found an (unanswered) message on a macosx.com forum. I'm reposting it because it provides more info about the same problem:
[quote]
"Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022)" -- Is the error code when I attempt to burn any disc using the Finder or Disk Utility.
"Interface Error: 5 The connection is not stable.
The drive reported an error:
Sense Key = Illegal Request
Sense Code = 0x210x02
BUFFER UNDERRUN" --
Are the errors when I attempt to use Toast Titanium v6.x and v7.x.
I'm using an iMac G5 running 10.4.2. I have two burners, both of which give me the errors and will no longer burn to CD's or DVD's (cheap or expensive media, I've tried many different types). The burners i have are an internal superdrive that came with the mac (MATSHITA DVD-R UJ-825) and an external LaCie Firewire DL drive (_NEC DVD_RW ND-3500AG). Both drives started giving this error at the same time and I can't think of anything that I installed that could effect these. I don't have any speed tools installed.
I have tried all that Apple suggests in the articles http://docs.info.apple.com/article.html?artnum=25750.
I've experienced the same errors twice before, though not both drives at the same time. What fixed it the first time was simply upgrading the firmware on the burner. Second time, there were problems on the hard drive that I was burning from (directory issues if i remember) and running a combination of Tech Tool and Disk Utilitity fixed that.
But this time, I'm at my wits end and can't find anything helpful online. I'm hoping to find an answer before I end up trying a complete system reinstall.
Any info would be greatly appreciated.
[/quote]
Yes, any info ...
TIA
Cube, 2 ibooks Mac OS X (10.4.2)

I'm having the same problem using Toast 7 to burn a Video TS movie I made. I'm using an external Lacie 16X DVD-R DL drive and an iMac G5 2.0, and Mac OS 10.4.3
After several failures with Interface Error 5, I tried copying a DVD movie I made from another DVD. This was created with the same Lacie drive using Mac OS 10.3 and my old iMac FP 15 inch. I got the same failure message.
I then switched my Lacie Drive to the USB port and everything is working fine. I switched it back to FireWire and I get the same error message again.
I can play DVD's on the Lacie with either the USB or FireWire port without any problem, I just can't record using the FireWire port. The FireWire ports on the computer work fine with all my other FireWire devices.
It must be a combination of 10.4.3, Toast 7 and Lacie FireWire. I'm going to recheck Lacie's site to make sure I have all of the updates.
iMac G5 Mac OS X (10.4.2) Mac OS 10.4.3

EEM interface errors not matching

I have the event applet configured below. I test by changing the controller time-slots to 1-15 instead of 1-24 in order to generate errors on my Serial0/1/0:0 interface. Errors are generated, but the eem applet does not match even though the errors are incrementing. I've turned on all suggested eem debugging and it shows 0 matches while I can see that the interface is incrementing the errors that should be triggering the actions from the eem.
configuration:
event manager applet multiple_if
event tag if_1 interface name Serial0/1/0:0 parameter input_errors_crc entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_2 interface name Serial0/1/0:0 parameter input_errors entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_3 interface name Serial0/1/0:0 parameter input_errors_frame entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_4 interface name Serial0/1/0:0 parameter input_errors_overrun entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_5 interface name Serial0/1/0:0 parameter output_errors entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_6 interface name Serial0/1/0:0 parameter output_errors_underrun entry-op ge entry-val 2 entry-type increment poll-interval 60
trigger
action 100 cli command "enable"
action 200 cli command "config t"
action 300 cli command "int Serial0/1/0:0"
action 400 cli command "description script worked!"
action 500 syslog msg "CRC failure leased line $_interface_name"
action 600 mail server "$_mail_smtp" to "$_mail_rcpt" from "$_info_routername@$_mail_domain" subject "ALERT: Serial Interface $id shutdown due to excessive interface error rate" body "\n$_syslog_msg"
action 999 end
debug ouput:
Jun 20 14:20:48 EDT: fh_fd_syslog_event_match: num_matches = 0
Jun 20 14:20:48 EDT: fh_fd_data_syslog: num_matches = 0
Jun 20 14:20:48 EDT: fh_fd_syslog_event_match: num_matches = 0
Jun 20 14:20:48 EDT: fh_fd_data_syslog: num_matches = 0
Jun 20 14:21:00 EDT: fh_fd_timer_process_async
Jun 20 14:21:00 EDT: cron_tick: num_matches 0
Jun 20 14:21:22 EDT: %HSRP-5-STATECHANGE: FastEthernet0/0.4 Grp 4 state Standby -> Active
Jun 20 14:21:22 EDT: fh_fd_syslog_event_match: num_matches = 0
Jun 20 14:21:22 EDT: fh_fd_data_syslog: num_matches = 0
Jun 20 14:22:00 EDT: fh_fd_timer_process_async
Jun 20 14:22:00 EDT: cron_tick: num_matches 0
Jun 20 14:23:00 EDT: fh_fd_timer_process_async
Jun 20 14:23:00 EDT: cron_tick: num_matches 0
Jun 20 14:24:00 EDT: fh_fd_timer_process_async
Jun 20 14:24:00 EDT: cron_tick: num_matches 0
output showing interface errors:
csc-lab01#sh int s0/1/0:0
Serial0/1/0:0 is up, line protocol is up
Hardware is GT96K Serial
Internet address is x.x.x.x/30
MTU 1500 bytes, BW 1536 Kbit/sec, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, LCP Open
Listen: CDPCP
Open: IPCP, loopback not set
Keepalive set (10 sec)
CRC checking enabled
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 02:44:23
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Class-based queueing
Output queue: 0/1000/0 (size/max total/drops)
30 second input rate 2000 bits/sec, 3 packets/sec
30 second output rate 2000 bits/sec, 2 packets/sec
     9139 packets input, 1049231 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     224 input errors, 224 CRC, 117 frame, 95 overrun, 0 ignored, 81 abort
     10737 packets output, 1511507 bytes, 0 underruns
     0 output errors, 0 collisions, 15 interface resets
     0 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
Timeslot(s) Used:1-24, SCC: 0, Transmitter delay is 0 flags

A few other things I noticed. Try this:
event manager applet multiple_if
event tag if_1 interface name Serial0/1/0:0 parameter input_errors_crc entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_2 interface name Serial0/1/0:0 parameter input_errors entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_3 interface name Serial0/1/0:0 parameter input_errors_frame entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_4 interface name Serial0/1/0:0 parameter input_errors_overrun entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_5 interface name Serial0/1/0:0 parameter output_errors entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_6 interface name Serial0/1/0:0 parameter output_errors_underrun entry-op ge entry-val 2 entry-type increment poll-interval 60
trigger occurs 1
correlate event if_1 or event if_2 or event if_3 or event if_4 or event if_4 or event if_5 or event if_6
action 100 cli command "enable"
action 200 cli command "config t"
action 300 cli command "int Serial0/1/0:0"
action 400 cli command "description script worked!"
action 401 set syslog_msg "CRC failure leased line $_interface_name"
action 500 syslog msg "$syslog_msg"
action 501 info type routername
action 600 mail server "$_mail_smtp" to "$_mail_rcpt" from "$_info_routername@$_mail_domain" subject "ALERT: Serial Interface $_interface_name shutdown due to excessive interface error rate" body "\n$syslog_msg"

Can we set the Option "Show add-in user interface errors" with VBA?

Does anyone know if the advanced Option "Show add-in user interface errors" can be set with VBA in Project Pro 2013?
\Spiro Theopoulos, Montreal, QC (Canada)

Spiro,
Sorry but as far as I know that option is not available through VBA.
John

When i click on filter gallary a error saying no more virtual tiles can be allocated!

Hi, when I click ion filter gallery a error pops up saying No more virtual tiles can be allocated.
I am running the latest version of Photoshop cc 2014
I have 5 gigs allocated ram to Photoshop
and enough space on the scratch disks.
I am running windows 7.
please help.
every thing else works fine on it though. o.o

Following on from yesterday, I realise why I'm getting this error. See I believe this is a bug. Incompatibility with MS UAC.
Is this a possible cause of your problem ?

Filter Module Interface Error, Lockup

Similar Messages

Maybe you are looking for