Filter not applying

I am trying to despeckle an old photogrpahy and when I click to apply the desired settings, it reverts back to the original and no effect is applied?  Why????

The Despeckle Filter has no user settings. Do you mean one of the other Noise Filters?
If you have the image at 100% view (View>Actual Pixels) does the filter work more predictably?

Similar Messages

  • Why is the SmoothCam (smooth cam) filter not applying to an exported clip?

    I have a clip that required some masking (which my graphics guy did on his PC). After importing the masked clip into FCP, I can't get the SmoothCam filter to apply to it. SmoothCam works great on the original shot from the camera (an MXF file), but not on the clip after it was "tweaked outside" of FCP.
    Does anyone know if SmoothCam has a limitation on what types of files it will work on (ie only raw footage files, MXF files, etc) or is there perhaps some metadata in the raw file that's needed for SmoothCam?
    We had tried exporting a smoothed version before I gave it to him for masking but he couldn't open it on his PC (don't get me started on that! haha).
    He did a wonderful job on the masking (using AfterEffects) but the clip still requires the SmoothCam. And SmoothCam is working just fine (I can still apply it on "raw" clips). But when I try to apply it to this "outside exported" clip, it just doesn't do anything...no error, no indication of analyzing the clip or even trying, nothing at all happens.

    I apologize. I posted this question a little prematurely. After looking through the FCP manual, I found this quote:
    +Note: The SmoothCam filter can be applied only to clips that refer to QuickTime+
    +media files. Also, the SmoothCam filter compensates only for the original video+
    +within a QuickTime media file; the results of filter and motion parameter settings are+
    +ignored. Make sure filters applied to a clip are ordered so that the SmoothCam filter+
    +is applied first.+
    I decided to post this reply in case anyone else came across this issue. Basically, it appears that SmoothCam will only work on QuickTime files (.mov I guess?). My graphics guy had made the file as an MP4 (again..don't get me started I opened the his MP4 in QT and re-exported it as a .mov and SmoothCam is analyzing it right now! So all is well.
    Sorry for the almost unnecessary post. Feel free to comment to expand/clarify my findings.
    Thanks!

  • Filter not applied in answers because of aggregate tables

    Hi Gurus:
    I am having an issue with filters and aggregate tables.
    I have a report which I am filtering on a dimension.
    Now, if I dont expose that column on report, it is not filtering properly. It is hitting aggregate tables and hence result is not correct.
    I checked physical SQL issued, and it doesn't even have that filter in WHERE clause. However, logical SQL has it.
    However, if I expose that column on report table, then it is filtering properly, since it is hitting base tables.
    I cannot include this column in aggregated dimension , since it is not part of hierarchy ( Snow flaked ).
    Any idea why is this happening?
    Please help me.
    - Vinay

    Hi Vinay,
    The hints I gave you are not work-arounds or band-aids to OBIEE. They are the features in OBIEE meant for a specific purpose.
    As far as the Best Practice OBIEE is meant strictly to source a Fully Qualified Data Marts. You cannot expect a high level summarized data within a few seconds from OBIEE, if you dont have data rolled-up and summarized to different levels.
    When we first started using this tool replacing Actuate a couple of years ago, we thought our users will be happy seeing the reports on a click. But it was horrible than Actuate because we dont have our data rolled-up or aggregated.
    Now our users love the reports because we have highly aggreagated data sources such as Essbase, Materialized Views, Query Re-Writes, Indexes, Partitioning etc.... etc... and these are all out side OBIEE.
    Thanks
    Sai

  • OBIEE not applying outer join syntax to filters

    (Note: I've already thoroughly searched the forums before posting this. Thanks)
    My problem is the following:
    I'm trying to build a report that is a count from my fact table, grouped by month from my date dimension for a given year, resulting in 12 data points. The problem is that not all months have actual data, but I still need those months to show on the report with a count of zero. Typical simple reporting requirement.
    I have already done the obvious and within my business layer made the join between my fact table and my date dimension an outer join on the fact side, just like you'd do if writing the query by hand. And when tested by hand this includes all dates for the year anyway, and when coupled with the appropriate null test on the count measure I'd get my 12 data points with zeros were appropriate.
    The problem is that there are additional filters I need to apply on the fact data (there are a couple text-based code values that didn't warrant full tables themselves so are just degenerate dimensions directly on the fact table.)
    When these filters are applied at the Answer level, I'm only getting back the months that actually have data, and lose the months where the count should be zero. A check of the session log for the query that was generated shows the problem. While OBI properly generates the outer-join syntax for the join itself between the two tables (my date dim and fact table) it does NOT apply the outer-syntax to the constant-based filter against the fact, effectively negating the outer join.
    Actual query from the log (I simply changed the table aliases from the ugly T##### stuff OBI generates to something more readable for posting here):
    select D.DT_MONTH_NAME as c1,
    D.DT_MONTH_NUM as c2,
    I.INC_TYPE as c3,
    I.INC_EMP_GROUP as c4,
    sum(case when I.INC_KEY is null then 0 else 1 end ) as c5
    from DATE_DIM D, INCIDENT_F I
    where ( D.DATE_KEY = I.DATE_KEY (+) ) and ( D.DT_YEAR = 2010 and I.INC_EMP_GROUP = 'CONTRACTOR' )
    group by D.DT_MONTH_NUM, D.DT_MONTH_NAME, I.INC_TYPE, I.INC_EMP_GROUP
    order by c2
    You can see that the outer syntax (+) is applied to the join, but not to the filter on I.INC_EMP_GROUP. If I take this query and drop it in something like SQL Developer, it only returns the months with data. If I throw the (+) after I.INC_EMP_GROUP like I'd do if writing this by hand, the desired zero-months results pop back in.
    I have already searched the forums and while lots of people seem to have asked this question, the only solutions involve things like trickery in the business layer using dummy fact tables followed by manipulations at the report level etc. Unfortunately I can't rely on these as the system is eventually to be turned over to users who can't be expected to apply various hacks to write reports.
    Anyone ever get to the bottom of getting OBI to apply outer join logic in filters as well, when the filtered table is meant to be outer-joined to?
    Any comments are appreciated.
    John

    I know that this thread is a bit old thought it might be helpful to some one...
    The Issue is, when using Degener@teDimen$ion ( this is !nner joned to FACT tables in BMM) and if any of the dimensions {other than theDegener@teDimen$ion (Let us say Dim X) } have an ()uter join to any of the fact tables, and you were doing your analysis using Degener@teDimen$ion,  Dim X, Measure value you will face the following issues.
    when filtering the analysis on the ()uter join dimension ( Dim X), the IN filter will not work. Reason is that the filter is getting applied to both the Dimension and FACT tables and the values that exist in Dimension Dim X but not in FACT table wont show up.
         The above issue can be fixed by changing the join between the fact and Degener@teDimen$ion from inner to outer. I think this is a bug.. because  it is supposed to filter the fact  table after the entire outer joined result is obtained but not filter the fact table for the Dim X values and do a outer join. I think the BI should be intelligent enough.

  • Radial Filter not changing to outside in Photoshop CC Camera Raw

    Hello folks,
    I realise that I may be missing the very obvious, so apologies in advance - this has been driving me nuts for a few weeks now and I can't find anything in forums to help me out...
    Basically, in Camera Raw filter within Photoshop CC, when I try to add a Radial Filter, I can only get the filter to apply on the inside - clicking the option buttons at the bottom of the menu, the adjustments never move from inside to outside, I can't get any adjustments to apply outside the radial, not even when I select New at the top of the menu either. What am I missing? Hopefully someone will be able to offer a solution!
    Thanks in advance,
    David

    ACR 8.7.1 is current can you post some screen capture where that shows your problem. Ther radio button should cause the current active  Radial filter to change.   Like this one I show that changes exposure of the area. "Must be Active" with overlay checked the boundary outline should be visible.

  • Why doesn't OTM display the Count of test cases when a Filter is applied

    Hi,
    I would like to know if there is a way to get the count of test cases returned when a filter is applied in OTM
    Though the Group By condition returns the number/count of test case, why a particular filter when applied, does not display/return the count of test cases?

    User just wants to get a count when a filter applied? If a report has to be created for a query/filter, then that conveys that OTM lacks usability.
    How about users who does not access to Reports Tab, users who dont have access to create reports?

  • DFS Subfolder Filter Not Filtering

    Server 2008R2
    Hi everyone,
    I'm troubleshooting a subfolder filter issue with DFS.  I followed the troubleshooting steps in the KB listed below and all went well.  There are no errors in the event viewer.
    http://support.microsoft.com/kb/272279
    Some thoughts:
    Since I applied the filter AFTER replication had occurred, will the filter still work?
    The filtered folder name has spaces in (for example: shipping & receiving).  Would this cause the filter not to function correctly?
    Any help appreciated!

    Hi,
    If applied a folder filter AFTER replication had occurred, the folder will stay on all servers. However, any new files/folders added to the folder do not replicate to any other server.
    The filtered folder name can have spaces in, the filter function still work.
    File and subfolder filters
    http://technet.microsoft.com/en-us/library/cc757726(v=ws.10).aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • LR5 Graduated filters not applied to final image

    I have recently had an issue using the graduated filters in the LR5 develop module.  While in the develop module (working with a raw image (panasonic GH3)), I can apply and use graduated filters without issue, but when I switch to the library module or export the image , the changes disappear.  I have shot a few test shots since and worked with some old images and I cannot reproduce this issue.  I have the same problem with every image from a single import.  There have been no changes in settings on the camera or in Lightroom.  I did use a new memory card, but I doubt that the card is the issue.  Attached is a screen shot of the image while in the develop module (right) and library module (left).  Anyone have ideas on how to fix this problem or avoid it in the future.

    This is probably actually not the graduated filter not working, but the preview in Develop not being reliable when zoomed out. I've run into this with my own star images. This often comes up in images such as this with lots of fine structure. The noise reduction is not shown reliably in Develop when zoomed out. Then when you switch to Develop, it creates a good preview image that does have noise reduction enabled and suddenly your images appear different and less punchy especially when you have lots of little star points. It is actually more representative in these conditions. Make sure you zoom into 1:1 to really judge what is happening. At 1:1 the preview is correct in Develop when you have lots of fine detail. You probably have a graduated filter with clarity here? That is notorious for not previewing correctly with such images in Develop. To test whether the filter actually takes, do something extreme such as a few stops of exposure or so.

  • GPP item-level targeting filter not working as expected

    I am trying to set the Internet Explorer homepage via user Group Policy Preferences (GPP) registry setting for a very specific group of users.  I am using item-level targeting to accomplish this but am having trouble getting the logic working as expected.
    Here is my item-level targeting filter:
    The user is a member of the security group CONTOSO\FireRescueDept
    AND this collection is false
         The user is a member of the security group CONTOSO\EmergencyManagementDept
         OR the user is a member of the security group CONTOSO\PublicSafetyDivision
    The user in question is a member of both CONTOSO\FireRescueDept and CONTOSO\EmergencyManagementDept.  I believe this means that this particular registry GPP setting should NOT apply to the user in question and that is the outcome I desire.
    Here is how I'm thinking about it:
    The user is a member of CONTOSO\EmergencyManagementDept; therefore, "The user is a member of the security group CONTOSO\EmergencyManagementDept" evaluates to TRUE.
    Since the other item in the collection is connected with the boolean OR operator, the collection evaluates to TRUE regardless of the evaluation of "The user is a member of the security group CONTOSO\PublicSafetyDivision."
    The item-level targeting filter is looking for the collection to evaluate to FALSE.  Since the collection has evaluated to TRUE, the evaluation "This collection is false" is FALSE.
    Because of the AND operator in front of "This collection is false", both "The user is a member of the security group CONTOSO\FireRescueDept" and "This collection is false" must evaluate to TRUE in order for the item-level targeting
    filter to determine that the user in question to apply the GPP setting the filter is attached to.  However, since "This collection is false" has already evaluated to FALSE, the filter as a whole should evaluate to FALSE and this GPP setting
    should not apply.
    However, according to gpresult it does apply.
    Please advise.  I want this particular setting to apply to users in the CONTOSO\FireRescueDept group unless they are a member of CONTOSO\EmergencyManagementDept and/or CONTOSO\PublicSafetyDivision.

    Am 21.05.2013 16:22, schrieb Scott W. Sander:
    > Does item-level targeting not work with Universal security groups
    > because the group policy client isn't able to determine that the user
    > is a member of groups of that type?
    In my experience, it DOES work with universal groups... Are you
    suffering from token bloat? How many groups is the user a member of?
    http://blogs.technet.com/b/shanecothran/archive/2010/07/16/maxtokensize-and-kerberos-token-bloat.aspx
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    Wenn meine Antwort hilfreich war, freue ich mich über eine Bewertung! If my answer was helpful, I'm glad about a rating!

  • V2.2 Graduated filter-not responding-quit

    The error report message in the Event manager is:
    The application, C:\Program Files\Adobe\Adobe Photoshop Lightroom 2\lightroom.exe, generated an application error The error occurred on 12/16/2008 @ 10:59:59.140 The exception generated was c0000005 at address 0000000180004C49 (ui!AgWinFont::GetFontSize)
    Faulting application lighroom.ex v 2.1.02. faulting module ui.dll version 3.1.02 addres 0x0000000000004c49
    Fault bucket 03087739
    Is this to be interpreted that there is a font that is corrupt?
    What does pulling up a graduated filter have to do with font size?
    Starting v2.2 up again and the image has whatever adjustments previous to the filter. Apply the filter in the same manner and it does what is expected.
    This has happened twice today.
    WinXppro 64
    Rose

    I filed a bug report.
    Did a search on the ui.dll and there are several instances of this error-Lightroom past versions and other softwares.
    Microsoft says in their articles that:
    Port monitor user interface dll contains ui functionality and executes on print client systems. Must reside in System32 directory.
    The above statement might not apply to a 64 Os system.
    The sole ui.dll on my HD is in the Lightroom folder (3,292Kb dated 11/24/2008 v2.2(523352)com.adobe.ag.ui. All other ui type dll's have additional letters preceding the ui.
    This computer is now 2 months old and I haven't got round to installing a printer and its drivers. I don't think that is the issue.
    The AVG scanner went into operation as soon as this lock-up occurred on both occassions. Shutting the computer down was the only way to remove that icon reporting that a scan was in place. Right click- Scanning the ui.dll reported nothing. I have put the Lightroom cataloque subfiles on the exception list of the AVG scanner.
    Overall, its not a big deal for all was not lost with the image in question. It was just a comeuppance with the fresh install of 2.2 since version 2.1 was doing just fine installed on a new machine therefore no other versions etc. involved.
    Rose

  • Connection settings not applied

    We have a X60s that has configured several connection profiles. On the wireless broadband it is not applying the network settings correctly. We have set WINS-server, lmhosts and Netbios in the adapter and the profile to the correct settings. But when it connects it removes all this settings from the adapter. Other settings like printers are applyed correctly.
    Connection Manager V 5.02 Build 7VC55WW

    Try to verify if you have AnyConnect for Mobile enable
    Licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 100            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    VPN-DES                           : Enabled        perpetual
    VPN-3DES-AES                      : Enabled        perpetual
    Security Contexts                 : 2              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 50             perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 250            perpetual
    Total VPN Peers                   : 250            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    Saludos,
    Jose Luis B.
    No te olvides de calificar si te sirvio la ayuda.
    Please do rate if the given information helps.

  • Need help: smoothcam filter not launching

    can someone help me out please!
    SmoothCam filter not showing any signs of life!
    I highlight a clip, apply smoothcam and it never shows up

    I think I figured something out. I captured all my footage with imovie which creates .dv clips. In FCP, Smoothcam filter will not apply to these .dv clips. If I convert the .dv clip to a .mov file using mpeg stream clip, smoothcam filter works fine on this clip in FCP.

  • Text not printing or PDFing. Non-printing is not applied. Help?

    I have a logo. The top is on a path applied to an oval. Same with the bottom. In the middle is an ampersand (&). When I try to print, only the ampersand prints. I've tried printing to 2 different machines. I also tried saving it as a PDF but I lose everything except the ampersand in the middle. Everything is colored black, so there are no weird colors going on. Non-printing is not applied to anything. Any thoughts? I can send the file to somebody if they want to check it out.
    ID CS 3
    Thanks,
    Chris

    Sorry for the delay. Spent some time looking for the font becasue I'm on Windows.
    I opened it first in CS5, and after font substitution it exported fine, so I figured maybe it was a font problem on your end, but just to be safe I opened it in CS3 to check. Same problem here that you have on your end.
    Good news, though. I exported to .inx and opened that. That page opened at 11 inches high, which may be part of the problem, but after resizing, it exported correctly. This is a pretty good inidcator of some minor corruption that is fixable by the export. See Remove minor corruption by exporting

  • Number format mask of text item is not applied

    Hello all,
    I want to format a number like 999G999G999G999G990D00
    Is specify the format mask under source of the item. But it is not applied and I don't understand why.
    See http://apex.oracle.com/pls/otn/f?p=53873:2 for example
    Btw. is it possible to set the format for all numbers in the application at once? I want to have a thousand separator in most cases.
    Message was edited by:
    Jacob_B

    Hello Jacob,
    Btw. is it possible to set the format for all numbers
    in the application at once? I want to have a thousand
    separator in most cases.I am using substitution strings for things like that. You can define some "global" substitution strings on page application definition.
    So you just have to put in the format (999G999G999G999G990D00 ) in there once and give it a name. Let's say NUMBER_THOUSAND.
    Afterwards you can reference it wherever you need the format e.g. this way:
    to_char(10000,'&NUMBER_THOUSAND.').
    This way you just have one place where to change the format model.
    Regards,
    Tine

  • MBean Attribute (Does not apply to application modules)

    Can any one tell what this mean ?
    MBean Attribute (Does not apply to application modules) :
    is this means that it wont help for datasources for any J2EE application ????
    Inactive Connection Timeout     
    The number of inactive seconds on a reserved connection before WebLogic Server reclaims the connection and releases it back into the connection pool.
    You can use the Inactive Connection Timeout feature to reclaim leaked connections - connections that were not explicitly closed by the application. Note that this feature is not intended to be used in place of properly closing connections.
    When set to 0, the feature is disabled.
    MBean Attribute (Does not apply to application modules) :
    JDBCConnectionPoolParamsBean.InactiveConnectionTimeoutSeconds
    Minimum value: 0
    Maximum value: 2147483647

    Yes!, they do not apply for any applications they are management interfaces, internal to weblogic.
    Below is the brief information about it:
    A managed bean (MBean) is a Java bean that provides a Java Management Extensions (JMX) interface. JMX is the J2EE solution for monitoring and managing resources on a network.
    BEA WebLogic Server provides a set of MBeans that you can use to configure, monitor, and manage WebLogic Server resources through JMX. This reference document organizes WebLogic Server MBeans into the following categories:
    MBeanServer Services, which serve as your entry point into navigating the MBean hierarchies. Some of these MBeans contain attributes and operations for managing changes to WebLogic Server configuration MBeans.
    Configuration MBeans, which expose attributes and operations for configuring WebLogic Server resources.
    Runtime MBeans, which provide information about the runtime state of its resources.
    New MBeans, which have been added in the current release of WebLogic Server. These new MBeans are also listed in other categories in this document (for example, new runtime MBeans are also listed under the Runtime MBeans category).
    Deprecated MBeans, which are deprecated in the current release of WebLogic Server.

Maybe you are looking for