Filter not working in case insensitive mode
Hi,
I have created a Dashboard using Oracle BAM (version 11.1.1.4.0). The Dashboard contains some filters to filter out the data visible in the report. If I give ALL or All in the filter and click on Go. I can see the data in report. but it does not recognize the same in lowercase("all"). Is this the expected behavior. Can we get the filter working with (all ) also with some setup change or so?
Please let us know.
Thanks
Hi,
Ex: your output is something like this
A B C
1 2 3
4 2 5
5 3 6
When you filter B for value 2, then internally it creates one more internal table like this
A B C
1 002 3
4 002 5
5 003 6
it tries to matches value 2 to 002 and it fails to retrive the record.
The solution is try to do the conversion exit on the column/field you are trying to filter it. It will work.
Regards,
Ramesh.
Similar Messages
-
NGS Sponsors authentication does not work in case user has non-English character in his password
Hi,
we are using the NAC Guest Server v 2.0.1 and have Sponsors authentication done through Radius servers. Radius servers are Microsoft IAS using AD.
Sponsors user authentication works okay in case user's password includes English characters, but does not work in case an user uses national characters like for example Umlauts in German.
On Radius server I can see these error messages:
User XXXX was denied access.
Reason = Authentication was not successful because an unknown user name or incorrect password was used.
As soon as an user changes his password and uses English characters only, it resolves.
I guess this might be that NGS uses different coding while sending a password to Radius server, but not sure.
Appreciate if anyone knows a root cause and what could be a workaround. Unfortunately our AD policy allows users to use national characters and we can hardly change it. So a change on NGS or Radius side would be more viable.
Many thanks for your help.A case has been opened at Cisco and it is now quite clear that it is a problem with coding.
According to Cisco development team NGS uses UTF-8 coding to send the password, of course encrypted, to the Radius server. This cannot be changed within NGS. We use Radius Microsoft IAS Version 5.2.3790.3959 running on VMWare Windows 2003 SP2. More tests are scheduled to be performed. -
in dubai FT,siri are not working in case when we move other country could we activate those feature in that country
Facetime is disabled in hardware per request of Dubai government. It
will not work if you move to another country. If you move and wish to utilize
Facetime, sell your iPhone before moving and get a new one at your new
location.
Apple has not announced if/when Siri will work in Dubai. -
MDX -Children count function Not working in Case statement
Hi,
I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
and When I slice with the parent level , it has to give all the members below that parent level.
But the problem here is when I select child member or leaf member , The first condition in the Case is not working
WITH SET
TESTSET AS
CASE
WHEN
[Dimension].[Hierarchy].currentmember.children.count<0
THEN
[Dimension].[Hierarchy].currentmember
ELSE
DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
END
SELECT
WBSSET ON 1,
{} on 0
FROM
(SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
Thanks,
SantoshHi Santosh,
I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
with member
testset as
case
when
[Geography].[Geography].currentmember.children.count<10
then "X"
else "OK"
end
select testset on 0,
{[Geography].[Geography].[Country].members} on 1
from
[Adventure Works]
In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms144932.aspx
http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
Regards,
Charlie Liao
TechNet Community Support -
Lens Correction filter not working?
I upgraded to CS5 specifically to use the auto lens correction feature (primarily for barrel and pincushion distortion on my Canon zoom lenses). Now I find that:
Even though the camera back (5D Mark II) and lens information is included with an image, the lens correction filter requires me to manually select the back and lens.
Several of my lenses are not even included in the data base, even though they're very popular lenses (e.g., EF16-35mm 2.8 L USM II and EF 70-300mm DO IS USM). I realize the data base is to be enlarged, but these seem like inexplicable omissions. (And I have no desire or time to create my own profiles.)
The PDF instruction manual for CS5 offers no help, and I don't see this issue addressed in the forums. I'm hoping someone will be able to advise me on how to make this function work.Jeff,
Thanks for the quick answer, but I still think the menu is misleading.
If the body choices were in the format of "full frame, 1.3 crop, 1.6
crop, etc.", it would be clear that the specific model didn't matter.
However, this would create its own problems since many people wouldn't
understand the concept of the crop factor for their camera.
The fact that the 5D Mark II exists in the pull-down menu as a discrete
choice in addition to the 1Ds Mark III implies that there is a difference
between the two. Even if there is no functional difference in this context,
it would avoid confusion if the actual body from the EXIF information could
always be the default selection.
Thanks.
From: Jeff Schewe <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 16 May 2010 23:57:46 -0600
To: Mike Curl <[email protected]>
Subject: Lens Correction filter not working? -
N5K : ethanalyzer capture-filter not working
N5K, NX-OS 7.0.5
ethanalyzer capture-filter not working whatever the filters used;
I understand the capture-filter values are different from display-filter;
for example :
ethanalyzer local interface inbound-hi capture-filter 'ip proto 89' limit-captured-frames 0
I tried "proto 89", "proto 0x59", and te same with ' ' instead of " ";
none is rejected but no frame is captured
If I use "ospf" as the capture-filter, I get the following normal since "ospf" is a display-filter :
tshark: Invalid capture filter: "ospf"!
That string looks like a valid display filter; however, it isn't a valid
capture filter (parse error).
Note that display filters and capture filters don't have the same syntax,
so you can't use most display filter expressions as capture filters.
See the User's Guide for a description of the capture filter syntax.
no problem with the following display-filter :
ethanalyzer local interface inbound-hi display-filter "ospf" limit-captured-frames 0
Any idea ?
thanksi think i solve the problem: to make vlan filtering to work on 6500, i've added:
# conf t
(config)# int vlan 4000
(config-if)# no shut
(config-if)# mac packet-classify
Now, how to mark this question answered? -
Oil Paint Filter not working - CS6 - Can you help resolve this?
Can you help? The CS6 oil paint filter is not working. The error is: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
I have the latest graphics driver software. I have the latest update for CS6. I have followed various community support recommendations to no avail.
In the Advanced Graphics Processor settings (preference, performance) only "Basic" is available and I can't select (grayed out) "Use Graphics Processor to Accelerate computation" and can't select "use OpenCL".
My System: Windows 7 (64 bit), HP Pavilion dv6-3250us Notebook with Intel(R) High-Definition Graphics Driver.
Here is system information (from CS6):
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 3894 MB
Free memory: 897 MB
Memory available to Photoshop: 3318 MB
Memory used by Photoshop: 69 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.15.10.2189
Driver Date: 20100728000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1723 MB
Video Rect Texture Size: 4096
Serial number: 95478109889423625236
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Chris\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 669.3G, 316.9G free
D:\, 29.1G, 3.72G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.3
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEYou haven't installed the Photoshop updates -- you should be on 13.0.3 or 13.1.1, not 13.0.0.
Oil Paint uses the GPU, and requires a decent GPU.
Your GPU doesn't support many of the features needed by the Oil Paint filter, and barely supports any of the GPU features in Photoshop (notice that it does not support OpenCL, or Normal or Advance mode for GPU drawing). -
Is prompted filter not working correctly with calculated items
Hello,
I am working on OBIEE 11.1.1.3 and having problem problem linking 2 analisys with action link
The test case is:
I have 2 attribute columns on a dimension
1. Conto 1 Code
2. Conto 1 Dsc (in RPD i set up the property Descritor ID of -> Conto 1 Code)
3. Conto 2 Code
4. Conto 2 Dsc (in RPD i set up the property Descritor ID of -> Conto 2 Code)
5. Conto Detail
and 1 measure on the fact table
1. Revenue (defined on RPD as simple sum)
On presentation layer i have the analisys:
1.
The First one using as Criteria: Conto 1 Dsc | Conto 2 Dsc | Revenue
The layout is a table with sub-total on Conto 1 Dsc
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 1 Dsc | Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 1 Code (is prompted) | Conto 2 Code (is prompted)
This pair of analisys are working fine.
Then i created a second pair of analisys as:
1.
Criteria: Conto 2 Dsc | Revenue
Using Calculated group \ Items i created a numerous set of sub-totals
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 2 Code (is prompted)
This pair of analisys are not working correctly. When i drill from first analisys to second one the Conto 2 Code filter is not used.
Replacing in the second analisys Conto 2 Code (is prompted) with Conto 2 Dsc (is prompted) a filter is being generated on the drill but it's using the Conto 2 Code value and the analisys ends with no results.
Thanks,
JonniTry adding Conto 2 code to the first analysis and keep the filter on the second analysis as Conto 2 code is prompted.
-Amith. -
Aspect ratio filter not working properly
I am running LR3.5 on Mac OS 10.6.8 and recently discovered that the aspect ratio filter is not working when used on folders created a few years ago. Specifically, a great many images shot in landscape mode are included with the portrait mode filter instead of in the landscape mode filter. This is not happening with more recent folders. At least one of my camera bodies has been used for images in older and newer folders so I do not think it is the camera's fault. I should also add that the files are saved in the dng format.
I do not know how long this has been going on, since I rarely use the aspect ratio filter. It is even possible that this happened when I converted my catalog from LR2 to LR3. The integrity of the catalog is checked each time I back up, which is whenever I exit. Does anyone have any ideas how to fix this?
Thanks.
MarkSo the metadata is properly showing the images as landscape. Somewhere along the way LR got out of sync, perhaps moving images into a new catalog? As long as there are no portrait Crops on any of these files they should filter properly after resynching the DNG metadata. There have been other posts with this same issue and a bug report to Adobe. Not sure it has been actually fixed though:
http://paulsumberg.com/2010/08/03/leave-it-to-me-to-discover-a-flaw-in-adobe-lightroom/
http://paulsumberg.com/2010/08/14/bug-alert-adobe-lightroom-and-work-around/ -
Filter not working in new and old task lists (new farm)
I noticed this after migrating some sites from our current production environment. Even when creating a new task list the filter will not work, however if I make a custom list and add the existing Assigned To column, the [Me] filter will work.
This is starting to drive me nuts, any help would be appreciated.This is a bug in the March 2015 CU. I have an open case on it, where MSFT is able to repro it. This is just a workaround and hopefully the issue will be resolved in the future. It only impacts Tasks lists.
As to doing it to all Task lists, no I'm unsure of how to accomplish that.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Edge Animate - Issues - buttons/symbols not working/disappearing when in portrait mode on iPad and mobile devices, but in landscape version everything is fine.
Everything works cross broswer on Desktop - Safari, Chrome, Explorer and Firefox - mobile devices prove glichy... anyone else experience this?
It's a regular issue of mine, particularly with complex animations. Symbols disappear
- is it something to do with overflow?
- responsive scaling?
I have no idea.Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
ALV Filter : Not working for a text field - Strange problem
Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav -
Query level filter not working in Webi report
Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen -
Image Buttons Not Working in IE10 Normal Mode
Hi Team,
Greetings of the Day!! We are supporting a project which included the technologies "ADF , BPEL , AIA , SOA".
We have a page developed in ADF and the page contains TABS.
We have a LOV which have 'Add Product' as one of the value.
When we click try to Configure the Line for a particular Product it is redirecting dmz-server where we have 'YES/NO' Buttons but this buttons are not working in IE-10 Normal mode and in other browsers buttons are working fine.
Could some one please help me on this.
ThanksFor that matter, the "return to menu" which is set to a Main button type, isn't working either. that is one of the three. After i had removed the damaged button and copied it from another it worked. Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons. I just can't figure it out. I have shut the app down and restarted and nothing seems to be working
-
Displaying Array Position not working in case of descending Order?
Hi,
I need to display the array position of the sorted array in Descending order. Here is my code.
int[] in = {5,3,2,7};
int[] newArr = new int[in.length];
int[] na = new int[in.length];
//copying into a new array
for(int i=0;i<in.length;i++){
newArr[i] = in;
// code for descending order
for(int j=0;j<in.length;j++){
Arrays.sort(in);
na[j] = in[in.length-(1+j)];
}the sorted array will be will be {7,5,3,2} now according to this i need to display the array position of the sorted array which should be {3,0,1,2} i tried to compare newArr[i] with na[j] but am not gettin the result that i should be getting the same comparison is working in case of Ascending Order but not descending. Any suggestions or help will be appreciated.
Thanks and regards.hi,
what you are doing is correct only, do not put sort method inside the for loop
and postion is correct also
int[] in = {5,3,2,7};
int[] newArr = new int[in.length];
int[] na = new int[in.length];
//copying into a new array
for(int i=0;i<in.length;i++){
newArr[i] = in;
Arrays.sort(in);
// code for descending order
for(int j=0;j<in.length;j++){
na[j] = in[(in.length-1)-j];
System.out.println("Val --> "+na[j]);
System.out.println("Position --> "+j);
Maybe you are looking for
-
Hi! I am in troubble following is the query SELECT inv_no, inv_name, inv_desc, i.cat_id, cat_name, i.sub_cat_id, sub_cat_name, asset_cost, del_date, i.bl_id, gen_desc bl_desc, p.prvcode, prvdesc, cur_loc, pldesc, i.pmempno, pmname, i.empid, empname F
-
How to create a UDF on BP Master Data that will not save any data?
I need to create several UDFs on the BP Mater Data screen that will be configured to automatically show a balance of 0-30Days, 31-60Days, 61-90Days etc. I am currently able to do this although I cannot seem to find a way to only show the current data
-
Hi Friends, In my SAP system we are using number range for material is as 12 CHAR. so we have created all materials with 12 no char only. We are this system for the past 3 yrs. Now all of a sudden my system is not accepting 12 CHAR material numbers,
-
How to build my own policy?
i need build my own policy to interact with database. just tell me where can i get a better reference of this. thanks a lot
-
hey guys i just recently installed adobe reader 8 professional on my pc, and apparently it saved a almost 1GB of files in the "setup files" folder. i really need some room in my hard disk, just wondering if i delete them would it affect the usability