Filter on status for user/position

Hi All,
I am working on Status Management and my requirement is to have a single status (System status In Simulation) of status profile linked to a particular BP and visible from it but hidden for another BP.
The status profile has to be the same used for MKT Object.
Anyone can tell me if there is some particular settings in CRM to do that? Any Badi to be implemented?
Thanks a lot,
Isa
Edited by: isabel2 on Feb 9, 2012 12:43 PM

Hi
Thank you very much for your advice.
And sorry for late reply.
We managed to solve the problem by this way.
①Go to SLFN0001 as we did before.
②Add new status in the first screen (just add something)
③Go to u2192Translationu2192Status Translation
④Select Maintenace lang: German and Language: Your lang (I put Japanese)
⑤Write status and Status and Save
⑥Go back to first screen of SLFN0001 and double click the new one that you created
⑦Add new transaction by New Entries (F5)
⑧choose transaction whatever you like (I choose it at random)
⑨Go back to first screen and make sure highest number is all the same
I have two points to mention.
①Please make sure to put transaction control (or action ) to your new one.
②Please make sure to highest number same from the top to the bottom
Otherwise the new status is not going to appear.

Similar Messages

Any Function modules or tables to find workitem in ready status for user

Hi all,
Is there any way i can find the possible workitems which is in ready state in a users inbox.
Thanks,
Neslin.

Hi Neslin
You can use this FM RH_LOCAL_INBOX_GET which gives all the details of the work item for the particulaer user. In this FM goto table tab WI_LIST willl give all the details WI_LIST-WI_STAT give the status of the work item.
Regards
vijay

Message status for user

Hi Everyone,
Could anyone let me know how the SOLMAN service desk can be configured so that the user who raises the message can view the status of the message from time to time. Is that they need to logon to SOLMAN in order to view this detail or is the any config or Tcode for the user to view these details from the satellite system itself?
Thank you
BR
Saravanan Ramasamy

Hi,
The configuration of the work centers is simple. Look for it in SPRO -> SAP Solution Manager -> Configuration -> Scenario specific settings -> Cross scenario settings -> Work center.
This is an explenation from the SPRO on what workcenters are:
"A work center is a user menu environment. The user can access alerts reports and documents, and perform authorized tasks, in a work center. A user can be assigned to several work centers, depending on his tasks.
You can call work centers in the Web Browser or from SAP GUI in the transaction SOLMAN_WORKCENTER (see. SAP note 314568)."
You may find more explenation and a SAPTutor (sim document) in http://service.sap.com/rkt -> SAP Solution Manager 7.0 -> Work centers for SAP Solution Manager.
There is also information on http://help.sap.com/ -> SAP Solution Manager.
Hope it was helpful
Adi

Incorrect password for user account SLDDSUSERSMD (USER_OR_PASSWORD_INCORREC

Hello
I am installing Java add In in Solution manager 4.0, Central Instance. The process stops in this step:
Mar 12, 2007 10:56:58... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Mar 12, 2007 10:56:58... Info: Connected to backend system SMD client 200 as user DDIC
Mar 12, 2007 10:57:02... Info: Called for user SLDDSUSERSMD
Mar 12, 2007 10:57:05... Info: Formal password check successful
Mar 12, 2007 10:57:05... Info: Will create user SLDDSUSERSMD
Mar 12, 2007 10:58:52... Info: Created user SLDDSUSERSMD of type A with reference user <none>
Mar 12, 2007 10:58:52... Info: Verification of status for user SLDDSUSERSMD
Mar 12, 2007 10:58:52... Info: User SLDDSUSERSMD exists
Mar 12, 2007 10:58:53... Error: Verification of status for user SLDDSUSERSMD failed. Task not successfully executed. Details following.
Mar 12, 2007 10:58:53... Warning: Error during creation of user SLDDSUSERSMD. Will remove user again to ensure clean exit state
Mar 12, 2007 10:59:44... Error: Exception during execution of the operation
Mar 12, 2007 10:59:44... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.security.tools.UserCheck$UserLogonException: Incorrect password for user account SLDDSUSERSMD (USER_OR_PASSWORD_INCORRECT)
     at com.sap.security.tools.UserCheck.checkUser(UserCheck.java:833)
     at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1904)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Mar 12, 2007 10:59:44... Info: Leaving with return code 2
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
INFO       2007-03-12 10:59:45 [synxcfile.cpp:177]
           CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\SOLMAN\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\dev_UserCheck.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.ume.userError:
Incorrect password for user account SLDDSUSERSMD (USER_OR_PASSWORD_INCORRECT)
ERROR      2007-03-12 10:59:45
           CJSlibModule::writeError_impl()
CJS-30196 Incorrect password for user account SLDDSUSERSMD (USER_OR_PASSWORD_INCORRECT)
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2007-03-12 10:59:45
FCO-00011 The step createSLDDSUser with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|12|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|createSLDDSUser was executed with status ERROR .
User doesnt exist in SU01 - I cannot find it. When I try to create it manually, I have the same error
Some help?
Thanks in advanced

At the end I have created the user
Thanks

Activation of User status for Prod. order

Hi,
I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
the requirement is after settlement the user status should get activated for production order.
Regards
Amit Parkhi

Hi Amit,
As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
Pls. go through the following procedure for activating the User Status :
Activating User Statuses
Use
You can activate a user status at order header and at operation level.
Procedure
Order Header Level
Go to the order header.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Operation Level
Go to the operation overview.
Select the operation in question.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Pls. follow the above procedure as per rquirement and set user status accodingly.
Pls. revert if any doubt and reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jun 23, 2008 8:10 AM
Edited by: Tejas Pujara on Jun 23, 2008 8:11 AM

Can we set "IN PROCESSu201D status for multiple users for a single workitem?

Hi,
As per my client current scenario every work item will be sent to 3 useru2019s (One is the supervisor of the other two users). If any one of the user executes the work item it will automatically call a Ztransaction and displays the screen. When the user without taking any action, he presses the BACK button (in Ztransaction) and comes out of the transaction. Then the workitems for the rest of the users will disappear from there inboxes.
But my client requirement is such that, whenever the user click on back button the workitem should be "IN PROCESS" status for two users(One is the supervisor and one who executes the workitem) out of 3 users possessing the workitems.
Please provide me any advice to the above requirement.
Thanks in advance,
Ranganadh

I think this can be done either by putting a check whether the user does anything. If he does a flag should be set which can be used in the Codition Tab of the Activity step that will prevent the workitem from completion.
Thanks
Arghadip

EXIT/ BADI/ Enhancement point for User Status change in Order

Hi all,
I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
Thanks and Regards,
Sonal

Hi,
Use this Enhancement IWO10009 and call these function module to change the User Status
STATUS_TEXT_EDIT --> To Read the existing status.
STATUS_CHANGE_INTERN_VB --> to change the status.
Regards,
Satish

How to Control authorization for users with certain status for level 2 WBS Element

Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib Usman

Hi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement

Need help on to set User status for Operations in Maintenance order

Hi experts,
i am new to PM module.
i need to do BDC for IW31. i want to know some inforamtion
on user status for each opertaion.
my problem is ,, what is user status.
why it is saying order is not yet released when saving and status can not set.
in this cases how can i do BDC.

User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
May be in your system user status are configured to set only after the release of the order.
For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

User exit for Previous and current system status for 5 transactions

Hi Experts
My Objective to capture the Previous and current status of system status for 5 transactions in their user exits .
Description                                         Business Object               Transaction
Production Order operations              BUS2005                            CO02 to edit Production Order
Maintenance Orders                           BUS2007A                         IW32 to edit Plant Maintenance Order
INTernal   ORDER                                 BUS2075                          KO02 to edit Internal Order
WorkBreakdownStruct                       BUS2054                          CJ02 To edit the WBS element
Project System Network                      BUS2002                           CN22 to edit Network
Activities Network
For Both Production order and   Project System Network Activities Network    ,
i got User exit " EXIT_SAPLCOBT_001 "
But i am not sure whether we can use this or not for our purpose . When i am changing status and then saving , my break point comes to EXIT_SAPLCOBT_001 .
But can we capture   JEST   or   JCDS related data   in that user exit or How can we capture both Previous status and Current ( Means New changed status ) . For eg From Released   to   Technically complete   etc.
I want Status changed and its immedtiate previous status.
Do i need to check Exit or BADI before and after Saving .
Thanks
Regards
Gaurav
Edited by: TheGaurav on Sep 8, 2011 10:28 AM

Hi Himanshu
Many Thanks for the reply .
I also had some other processing needs to be done on the basis of those status. .
So do you have any idea or how to find what all exits or BADIs i can use for all of these 5 transactions , where
i can get data for JCDS ( or JEST ) .
CO02 to edit Production Order
IW32 to edit Plant Maintenance Order
KO02 to edit Internal Order
CJ02 To edit the WBS element
CN22 to edit Network
can we use   EXIT_SAPLCOBT_001 for    CO02 and CN22   .
Edited by: TheGaurav on Sep 8, 2011 1:21 PM

User status for component item in service order (plant maintenance order)

Dear experts,
I cannot find the customizing for assigning a user status (profile) to a component item of a service order.
IW31 - tab components - mark an entry - click on button "component status"
Can you help me?
Best Regards,
Philipp

OSS message created. Answer from SAP:
11.02.2011 - 15:04:46 CET - Antwort von SAP
Hello Mr. Miller,
user status for components are not possible and not intended. I'm
sorry that I cannot provide better news.
Best regards
Reinhard Gruber
Senior Support Consultant
AGS Primary Support,
Business Suite & Technology
SAP AG
Therefore this message is closed... but not yet answered
Edited by: Philipp Miller on Feb 11, 2011 3:28 PM

Set User-status for PP order

Hi All,
How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
Thanks
Mark

Hi,
Try the following enhancements/exits for setting the status for PP order.
STATTEXT
CCOWB001
COIB0001
Regards,
Anji

System status or user status for IDOC creation and processing for prod ord

All
I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
Second question, which idocs should I use to confirm, teco and cancel the production orders from an external system?
Thanks
Evan

For the first part of your query refer to the technical forums.
For the second part - refer to Idoc - LOIPRO01, it has a segment for Order status, that should be of interest.
Attn Moderators
I think it would be better to move this thread to a technical forum, so the requester can get the most relevant information.

BAdi DPR_EVENTS for user statuses

Hi,
Anyone having ideas on how to use the BAdi DPR_EVENTS when user defined statuses are triggered?
Regards,
Vivek?

Hi Vivek,
It's not possible to use this BADI for user defined statuses.
We had a similar need a few months ago. We solved it by implementing an enhancement (pre/post exit) in dynpro DPR_STATUS_THRESHOLDS, view VI_STATUS, method ONACTIONCHANGE_STATUS. We can detect here which status (user or system) has been selected.
Matthias

Set a User Status for Quality Notifications only if they are "Activated".

Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?

Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status.

Filter on status for user/position

Similar Messages

Maybe you are looking for