Filter OWL by Group Count

Hello everyone,
As you may know you can group records by a certain element in an OWL.
When you do this, it looks like this (in my example):
As you can see next to the group a count for the amount of records in that group is shown (circled in red).
I was wondering if it is in anyway possible to filter or order by this count?
For example:
Would it be possible to only show groups where the group count is greater than 1?
I've read this thread: Group by any field (SDK), but I'm not sure this is what I need...
Thanks & Regards,
Glenn

Hello Glenn,
In the UI Designer for your own UIs it is possible to enter Ruby-like code.
In the docu it's called "Front-End Script".
It can be found in the section "Scripting Langauges".
It's mostly used to modify the properties of fields, buttons, ...
Be aware that it will not run on iPad and iPhone.
Bye,
Horst

Similar Messages

Group and group counter used to create cost estimate

I am creating a custom report and would like to know what table do I have to use if for a given material the program has to pick Group, Group counter and the task list type that were used in creating the cost estimate for that material. Any help in this regards is much appreciated.
Regards,

The name of the table that needs to be used is KEKO. I figured it out so I thought I would share
Edited by: NIK83 on Mar 7, 2011 10:16 PM

Group and Group counter in Routing

Hi all,
what is group and group counter in routing , how these are used in routing , please explain.
Regards,
Joseph.

Dear Joseph,
1.Each routing is stored against a group and group counter no.
2.When we create routing without respect to any material and only by giving the plant,the set of operations gets saved under one
group counter and group no.
4.Many materials can be assigned to this same group and group counter no,so that the routing is valid for all the materials included.
5.When you create a routing for material specific,the set of operation gets saved in a group no and group counter no as 01,when
you create another routing with another set of operations for the same material,plant and task list combination now the group no
remains same and the group counter gets saved under 02.
6.This data can be further helpful in assigning the routing data in the production version,.
Check and revert
Regards
S Mangalraj

How to count rows in a group =Count(Fields!FirstName.Value,"GroupByInitial")

I have a tablix grouped on column a and detailed on column b.
I am trying to count the rows in 3 separate ways.
CountDistinct(Fields!A.Value) =work perfectly on group column
CountDistinct(Fields!B.Value) = work perfectly on the detail column
But now I was
Count(Fields!A.Value) = on the group column but I get all the detailed count 13 instead of just the group count of 4.

Hi Giss68,
Based on my understanding, you want to calculate the count of the group fields, right?
In your scenario, if you use Count(Fields!A.Value), the expression returns a count of specified values evaluated in the dataset scope. So it’s expected that you get count of all Fields!A.Value instead of grouped fields. Since you want to calculate the count
of grouped column fields, you should use CountDistinct() function.
As we tested in our environment, we specify the expression with CountDistinct() function, we can get expected result.
Reference:
Count Function (Report Builder and SSRS)
CountDistinct Function (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Filter AD Security Group and add member through visual webpart

Hi All,
I want to know how to Filter AD Security Group and add members to it from SharePoint 2013 Visual webpart, where i have multiple domains as well.
Regards
Rathanavel
Rathanavel

SP doesn't interrogate AD groups (DL's or SG's)... you'll need to query AD directly (ADSI).
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Js link - Display group count list SharePoint 2013

I have a list column name "category" with values like Completed, Not Completed, Started.
I want to group list items based on category. I want to format it without showing all the list items so that it should look like:
Completed : 45
Not Completed : 30
Started : 20
I am using Js link functionality on the list webpart to achieve it.
(function () {
var itemCtx = {};
itemCtx.Templates = {};
itemCtx.Templates.Group = GroupOverride;
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(itemCtx);
function GroupOverride(Ctx, group, groupId, listItem, listSchema, level, expand) {
return '<div style="font-weight:bold; display: inline-block;">' + listItem[group] + ' ::' + '<div><ul>'+ listItem[group].Count + '</ul></div>' + '</div>';
By using above code, I am able to show category names but not the count (listItem[group].Count is throwing error). Any idea how to achieve it?
Completed :
Not Completed :
Started :

Hi,
According to your description, you might want to change the format of the list view to display without list items.
I would suggest you debug the script in browser to watch if
listItem[group] object contains a valid Count property.
About how to debug JavaScript using IE Developer Tool:
https://msdn.microsoft.com/en-us/library/ie/bg182326(v=vs.85)
If your requirement is to display something like a static HTML table, an alternative way is that you can apply custom CSS to the page to hide the unwanted elements.
Here is a working demo will display the list view in a similar format as you want:
<style type="text/css">
.ms-gb
border-bottom: none !important;
.ms-gb a, .ms-gb2 a
display: none !important;
thead
display: none !important;
</style>
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Tasl list group and group counter

hi,
i have one requirement . I have give internal number range to the task list. so my need to to create task list with one group and several group counter. But what is happening is when i run LSMW for that. seperate group numbers has been generated for each task list. is there any way to get the same group number with different counters using LSMW>

hi
since you have given internal number range for task list system will try to create task list with different group numbers .if you want the same group number with different group counter then i think you have to use the task list with external number and use the number created before
regards
thyagarajan

Essbase 11.1.2.1 Users not inheriting filter access from group

Hello all! We installed Essbase 11.1.2.1 in a distributed environment integrated with Shared Services and ran into an issue when provisioning users via groups. Using Shared Services we created a Native Directory Group and User. We provisioned the group with the Server Access Role and Filter Application role, then assigned the filter to the group using 'assign access control' on the application in Shared Services. For some reason using the Essbase add-in we are unable to retrieve data from the database. We receive an error stating the user id does not have read access to the db. If we carry out the same provisioning steps above on the user directly, we are able to retrieve data from the database. Any ideas on what might be causing this?

In V11.1.2.2 ESSBASE is managed by OPMN. OPMN needs to be started before starting ESSBASE. You need to use "start.sh". Please do the following
1) Run "stop.sh" that is in the starter scripts folder - This will stop all Oracle EPM components that are installed on the box
2) Run "start.sh" - this will start OPMN, ESSBASE and all other installed components
The "startEssbase.sh" and "stopEssbase.sh" can be used to start or stop ESSBASE only when OPMN is already running.

FM to create equipment task group counter by copying the existing one.

Hi Experts,
I need FM to create equipment task group counter by copying the existing one.
Manully we do this through the Tcode : IA01 but i want to do this through the Prog... for that i wrote one bdc it is creating some problem.
Please let me know any FM avaliable IN 4.0B
its very urgent please help me..
Regards,
Kali Pramod

try this /ISDFPS/TASKLIST_CREATE

Does AD member group count has a critical limit in OAM?

Hi,
I’m using Oracle Access Manager 10g (10.1.4.0.1) to setup an SSO system. The user base is an instance of Microsoft Active Directory 2003. I’m authorizing a particular URL (which is defined as a Policy Domain in OAM) for the users based on user groups defined in the Active Directory.
I’ll explain my problem using this example. Suppose the URL I’ve setup is http://www.example.com/test. Therefore, ‘/test’ is defined as a Policy Domain in OAM. Within this policy domain, I have two (enabled) authorization rules namely, Rule-A (allows access to the AD group, Group-A) and Rule-B (allows access to the AD group, Group-B). Then, under ‘Default Rules’ I have defined the authorization expression as, <strong>Rule-A | Rule-B</strong>.
In the AD, Group-A has 500 member groups and Group-B has 1900 member groups. (User accounts are members of these sub-groups). Let us suppose that there is a user account called User-A as a member of a sub-group under Group-A, and User-B under Group-B likewise. My problem is, that when access is tested for the above URL through the ‘<strong>OAM Access Tester</strong>’, User-A is authorized but User-B is shown as “Inconclusive”. Is this related to some member group count limitation in OAM? I would be really grateful if anybody can help me.
By the way please note that, I’ve already changed the value of the parameter “<strong>maxForRangedMemberRetrieval</strong>” to 1500 in \IdentityServer_install_dir\identity\oblix\apps\common\bin\globalparams.xml, as suggested in OAM documentation.
Regards,
Asanka Gallege.
Edited by: ASGALK on Nov 6, 2008 11:30 AM

Originally Posted by dkitzen
Hi Thomas,
Thanx for the quick reply.
Is it posible to edit the LDAP request in ZCM, like explained below?
To perform a search where the result might exceed this number of objects, the client (ZCM) must specify the paged search control. This is to group the returned results in groups that are no larger than the MaxPageSize value.
Greetings,
Dennis.
Not that I'm aware of, you need to increase the MaxPageSize value of your AD.
Thomas

SNMP query for multicast group count

I want to get the total number of multicast groups on a switch. Is there an oid that will give me the info (ie. the number that's given by "show ip igmp snooping groups count")? If there is no oid, is there a way query the groups (show ip igmp snooping groups)? I'm thinking with the 2nd option I might be able to count the number of entries returned by an snmpwalk or something and turn that into a number.
Right now i'm logging into the switch with a script and running the command but that might be a problem with all those logins (only every 5 minutes though) so I'd like to do this via SNMP if possible.
Any ideas?
Thanks

Works just fine!!!
Thanks!
LA$$E
Hi,
Well, at the very least, you can create a formula
column in your break group using a combination of the
same where clause as your original query and the
break values for the group so that you are getting
the correct records. If you have it in the break
group, then it will execute for each record in that
group.
Hope that helps,
Toby

Link Recipe Group counter and Operation

Hi,
I need to develop a report where selection screen will have "recipe group", "group counter" and "plant" and want to extract operation details for that group and counter.
Please tell me the table / field name where I can see Group/ Group Counter and Operation details together. (In PLPO group counter is not available and other fields like "Group of the referenced task list" and "Refer. group counter" is appearing blank; value in field "node" is not the value of "counter").
Also let me knwo the table where operation classification (KLAKZ) indicator is maintained.
I am trying to extract operation classification (class type 019) values for a recipe group and counter.
Regards,
Abir.

hi .
Please find following tables related with routing
                     MAPL                    Allocation of task lists to materials
     PLAS                    Task list - selection of operations/activities
     PLFH                    Task list - production resources/tools
     PLFL                    Task list - sequences
     PLKO                    Task list - header
     PLKZ                    Task list: main header
     PLPH                    Phases / suboperations
     PLPO                    Task list operation / activity
     PLPR                    Log collector for tasklists
     PLMZ                    Allocation of BOM - items to operations
Regards
SANIL

Is there any way to filter an AD group for Synchronization?

Project Server 2010 , the AD synchronization fails every week because of users who have left the organization.
Is there any way to filter the AD group so that only active users are picked up into the application?
Thanks in advance.

Thanks Ricardo.
The problem is that if a user leaves, his id is usually reused.
Eg. John Smith leaves the organization, his ID JSmith is reused.
But the original record is in the AD group, so it fails to recognize the new user say Jack Smith.
The error seen in the logs is typically:
" A resource could not be updated during Project Server Active Directory Synchronization because a duplicate windows account name conflict occured that could not be resolved. Resource GUID: d2077b6c97992-57d5-4d87-9ba9-c6ae273. Resource Name XYZ"
and
"the supplied windows account name is invalid."

Find Group counter for an insp. characteristics

Hi Friends,
I have a information of inspection characteristics that is PLMK-VERWMERKM. Now how do I find out what is group counter(PLNAL) associated for this insp. characteristics.
As we don't have PLNAL in PLMK to match it with MAPL-PLNAL I am getting multiple entries based on PLNNR condition in MAPL and not able to find which group counter is associated with which characteristics.
Please can anyone tell me how to link these QM tables?
Thanks,
Meenu.

Use FM QPAX_PLMKB_READ_FROM_PLKO

How do you filter content by groups?

I used to spent a great deal of time on Apple Discussions, but having been away for a couple of years I see there have been major changes. As a result, I'm finding it hard to manage tasks that used to be easy, & I would appreciate some help with these questions so that I can go back to helping others…
1) How do you filter "Content" by groups? I used to be able to select the group I was particularly interested in (usually Logic Pro). I see that if a recent question has been asked in a group, I can click on the name of that group — but if no questions have been asked in the last few hours, this would mean page after page of scrolling…
2) Someone answered another question I asked yesterday. I wanted to thank them & to mark the question as answered. But all I could see was the "Helpful" link (which unfortunately I clicked on before I realised it wasn't the same as the old "Answered" link). I can't see how to mark the reply as THE ANSWER, I can't see how to mark the question as answered, & I can't see any way of replying to the answer. The only text field available is to reply to myself, which seems daft — & yes, I AM logged in.
(I can't quite believe how hard it is to find out this stuff. I recall a certain meeting where the object of the exercise was to make the interface more accessible, not more opaque…)

A lot of the collective consciousness:
How to improve your experience with Apple Support Communities ( ASC )
Easiest way to all User Tips on Using ASC may be to add " /content " to the URL then click the User Tips Category TAB
*some User Tips have some of the same stuff but also some unique
SITEMAP | Apple Support Communities has some gems as well

Filter OWL by Group Count

Similar Messages

Maybe you are looking for