Filter Selection for Old flicker look
What filter is being used that gives that old timey look where you have vertical bars that move around in the image? Is this a filter or an effect that has to be built?
Thanks,
glenn
Hi,
If you use the CGM aged film free plugin you can obtain some decent results.
Are you after something like this (See the first few seconds)?
http://videonline.co.uk/Filmburn+aged_filmFX.mov
If so then I used the filter above mentioned but I added the flicker effect in FCP using the blink filter since CGM does not give you that.
Here is the link to dowload the plugin:
http://www.cgm-online.com/cgi-bin/dve_downloadcount.pl
You'll need to play with parameters in order to get some sort of acceptable random scratches, hair and grain.
G.
Similar Messages
-
I'm new here and need some help, or I mean lots of help. I am sure these are simple but....
1) I have a Canon XHA1S and Adobe Premiere CS4 and need to know how to get the lines effect in the film to make it look old and scratched?
2) How do I get the old yellowed look from the color correction, right? Or do I need a filter?
3) One last question, How do I get black and white if i wanted?
Thanks and appreciate your time.Digieffects has been coming out with some sweet, very cheap moduals based on plug-ins they bought from Buena Software and Walker FX.
Camera Mapper is amazing, it makes camera projection a snap (even better than PS's Vanishing point). You could build amazing 3d Matte Paintings and backgrounds with it.
The equally amazing photoreal Falloff Lighting fills a huge gap in AE's light/3d system. Having the option for inverse/square (in plain english: it gives you option to make AE's light actually work like a real light does). A bargain at 50 bucks. -
Filter selection for 0TCTQUCOUNT to get number of navigations
In BI statistics, we have a key figure 0TCTQUCOUNT to get the count. can any body tell what are filter selections to get number of navigations in a query.
thanks
kumarHi,
You can use FM rh_struc_get with evaluation path MANASS to see of which organizational unit the manager is manager of.
ANd then either with evaluation path B008 to see who is placeholder of that unit, or with O-O_DOWN to get all the subsequent units.
Regards, Rob Dielemans -
Creating Artifacts for "old Movie" look
I'm trying to create a symbol that will go over a silver screen in a project i'm working on. The symbol I want to repeat over and over and create an artifact look. Like how in the old moves you would sometimes get those lines on the sides or splotches.
I've tried doing a mask (So that only a certian amount of space is visable.) but it jsut flashed black and white.Also, and I know I'm going to get flac for mentioning this, Matrox has a pretty good "Old Movie" effect. We've got the RT.X2 card and I used the effect for some footage a client needed for a Western-themed event. It let you control the amount of dust and scratches, the jitter effect and the grainness as well as making it pure black and white or sepia colored.
If you're looking for a free method, you can create the effect manually using After Effects, but it takes some effort. I'm pretty sure there are some tutorials out there to show you how to do it.
Take a look at this:
http://www.videocopilot.net/tutorial/old_film_look/ -
NW04s(SP7/FEP7)-Select Filter value for HIER in 3.XBexAnalyzer doesn't work
Hi,
We went live with SPS 7/FEP 7 and we are having problem in 3.X Bex Analyzer with "Select Filter Value" for charcteristic having active hierarchy(in this case it is using time dependent hierarchy). (For Eg: Organization Unit)
If I inactivate the hierarchy for organization unit at query level and then execute the query, then "select filter value" works for Organization Unit.
NOTE: I checked other query using hierarchy (not time dependent hierarchy) and I was able to do "select filter value"
Please let me know if any OSS note is available for this issue so that we can fix this issue in our Production Environment.
NOTE: The above issue works in SPS 8/FEP 802 with 3.X Bex Analyzer.
Thankyou,
-Sini
Message was edited by: Sini KumarHi,
Did you have an asnwer to your problem?
We've a similar problem we had a technical upgrade to BI 7.0. But we still work with the frond end tools of 3.5.
When we select in the Bex analyzer a node in an hierarchy it shows the result, but if want to select an other node we must first remove the old filter. This wasn't when we're on the 3.5 enviroment.
Maybe if the problem is solved, this can help us.
Thanks in advance!
Regards,
Juriaan -
Like I wrote on title, I am getting old and it is not easy to see E-mails, news etc. on a I phone! New I phone will not help me for the size.
If possible, everything without calls, I would like to use I Pad as direct unit, and for calls through I Pad over WIFI all calls. If a call as Skype, I would like
to use the I Pad as a monitor. Is this possible?
I found on a side that there is a product for people for better hearing, which can be put into the ears, using WIFI with I Phone.
If this product could be used also for I Pad as a Phone for hearing, and the I watch or I Pad as Microphone, it will be great for old Mac users.
Is this possible with our system know?
I am using Mac since Classic II! Would like to continue with the newest items with the possibility for old person with bad Eyes or Ears.
Looking forward for a kind answer
with regards
Christian an old Mac user!Definitely No
-
Why tomcat is still looking for old jar files?
Please help me it is a very serious problem.
I updated one of the jar files used by the project. I am using a new method that is available only in the new library. I removed the old jar files in my local system, and everything worked fine. Then I commit those files to the subversion, which is in the testing server, and then I created the war file. The war is successfully created, then I deployed to the tomcat. But, now there is an error in the portion I am using the method that is only available in the new jar files.
One of the error when I go to that portion is:
1. No Such Method Exists
The other errors on log files are:
1.
WARNING: Failed to open JAR
java.util.zip.ZipException: No such file or directory
2.
validateJarFile(tomcat/webapps/ROOT/WEB-INF/lib/j2ee.jar) - jar not loaded. See Servlet Spe
c 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
Please help me, I have tried every other way to solve this. I have tried removing all the old jar files there were, and replacing with the new one. I have tried creating a war file and ftping to the testing server.
I problem is still there and it is because the testing server's tomcat is still looking for old jar files. I used Netbeans and add jar files as usual method.Check the contents of your WAR file that you are deploying on the testing server to see if it contains the JAR that you can't find.
More than likely you are building your WAR file and your new JAR file is not being included in the build. -
Went looking for fun movies to download for my holidays. Found Sixteen Candles and others for £3.99, great! Went to download them this morning on wifi and ***! All movies are now £6.99 each. Total RIP OFF for old movies. Why oh why iTunes? Stop being so greedy and make older movies a more reasonable price. I would buy a lot more, it's just false economy in my book. Don't get me started on the difference in price with the US.
Stop being so greedy iTunes!
Anyone know how I can get cheaper movies?Apple won't read your post here since this is a user to user forum. Provide feedback:
http://www.apple.com/feedback/ - Apple products feedback links -
old computer crashed. iphone is looking for old computer so I can't get it to sync with my new computer. Suggestions?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
Can't find FILTER CONDITION for filters or Function_Name for Functions
In the Data Warehouse 11gr1 views all_iv_xform...
I can't seem to find the Filter Conditions for filters and function name for functions that are called.
I have looked at the other views in the documentation for the API's but can't seem to find this information.
Any body have any ideas where this information is?
thanks
greGselect map_component_id, position, source_parameter_name
from ALL_IV_XFORM_MAP_PARAMETERS
where map_component_id in (
SELECT map_component_id
FROM ALL_IV_XFORM_MAP_COMPONENTS
WHERE MAP_ID IN (
select MAP_ID
from ALL_IV_XFORM_MAPS
where MAP_NAME = :p_map_name
AND OPERATOR_TYPE = 'Filter'
Using map_component_id and position from above query you can see your filter condition defined in property_value:
select map_component_name, property_name, property_value
from ALL_IV_XFORM_MAP_PROPERTIES
where map_component_id = :p_comp_id; -
My G4 400 Mhz PCI "YIKES" machine has only 5 led's, none in DS4 or DS5, nothing there but the un-molested sodlier bumps (never has anything been there), and my lighting sequences are 7 & 8 are on together, the others are dependant upon keystrokes or other demands (mouse, etc.).
There are seven diagnostic LEDs on the Power Mac G4 (PCI Graphics) logic board.
DS1 = ATA drive activity
DS4 and DS5 = USB power for downstream devices (There is no DS2 or DS3 on the board.)
DS6 = Ultra ATA bus activity
DS7 & DS8 = Power Indication
In a working unit, these LEDs should be in sync with each other: both on or both off. If one LED is on and the other is off, there is a problem.
DS9 = CPU Bus
Now I have a problem that started when I opened the side to check the led's in operation, side was open for 6 or 7 minutes and I got the screen of death, darkened, need restart, multi languages. .... I had just cured the start-up problems I was having for a month, 10 days ago. It was the powered USB hub plugged into the machines back panel, instead of the K/B port, I did have the mouse to the K/B and hub to back of machine, swapped locations and it was fixed, even the dead printer came to life and began printing (hadn't worked for 10 months !!)
What cuased the "screen of death" was traced to a memory dimm / ram stick that died, a PC133, 256MB made by 16X8 (or XB), I swear I wasn't dragging chains over the M/B, or anything really stupid, (I ain't the sharpest knife in the drawer, but not dumb either).
The "death screen" has caued a big headache, very hard to get to Applejack, open firmware, ect., I have, but not with any consistancy, did them, did DU test & verify, all passed "GOOD" or "no problems", all this was done in "safe boot mode", but I can't get to "regular mode" after restart !! ... it just sits on the gray apple screen w/o the spinning gear / wheel for hours !!!
Any ideas would be nice to hear, I plan on doing a re-install or repair / restore from / with the install DVD tomorrow.
And a link to info. of which ram / dimm memory sticks I might use from the other machines I have here, a G3 B&W, G4 QS 800 DP, etc. what will interchange ?, if any ? ........... Thanks for any input you may have, ..... wayne146 .....
I need some sleep, this has given me a massive headache, all because I read that quote and knew my lights didn't quite match it. ..... If only I had not cared, I migth not have gotten in such a bind / blunder, stupid me, I could resist it, I had to look for a compairison.
signing off for a few hours ....... wayne146 ..........Good Morning, old comm guy,
Well I tried following your instructions to the letter, as best my limited knowledge would take me.
I opened the "terminal window", then "terminal preferences", the proper radio button was already checked for the phrase you indicated, and the insert line / window had "/bin/bash/", grayed out in it, below that is the "declare terminal type" that was set to "xterm color", so I couldn't change the grayed out window, but I could make selections for "declare. term. type" ... I left that as it was at "xterm color".
In the bottom of the Term. Pref. window is a "Open a saved term. file ...." and a window to enter a selection, when I clicked on "select", it open a "finder window" ,<applications> with almost everything grayed out, not knowing what to do, I backed out of the finder window, and also I can't just type a command into the "open a saved term. file" window, it must be done with the select button.
So basically I'm saying this Unix stuff is all Greek to me, I would need more detailed instructions to follow to the letter, for me to get through this with any success.
And this is weird, while I was working in Yahoo mail and here in discussions I was in "Safe Boot" for several hours, with several restarts in "Safe" (the only way I could do anything) I was swapping and checking a few different RAM sticks with the diagnostics in "about this mac" (one had died when watching the led's). the one that died, return to the living & working world, ??????? ..... and this G4 400mhz "YIKES" machine, STARTED FUNCTIONING PROPERLY AGAIN (?????????????) SHUTDOWN W/ K/B BUTTON, RESTART W/ K/B BUTTON, So weird !!!
And anther bit of weirdness is that while the Apple Tech. info says this uses PC 100 sdram, every stick of memory in this machine has stickers on them from different makers saying that they are PC 133 sdram of 256 mb. ??? ..... Can this be true ?, has this thing altered itself or altered the RAM, to work with each other ???
After it started working "properly" (?), both Firefox and Safari crashed many times and often, so I dumped Firefox (3.6.19) and reloaded a fresh FF 3.6.19, as I may have done something to them by accident in my panicing and buggering around, even had a Screen of Death 1 or 2 times, and it restarted with only a push of the front reset button, restarted as if it was just turned on with no problems lurking in it's past. .... Also weird !!! ?????
The New FireFox (3.6.19) hasn't crashed since the new install, that maybe OK now, time will tell, ........ wonder if the wrong ram was causing browsers to crash ???? ... or is the ram wrong ??... why is it working ???
All the Ram stick were bought from "Chris", the Apple Expert @ RE - PC, here in Seattle, he also sold me this YIKES machine, so there was no mistake as to what I wanted the RAM for.
I have a spare G3 B/W 450Mhz machine that also has pc 133 sdram in it as well, same thing with it, bought from "Chris", and the Ram in it too. It only has OS 9.2.2 on it, I need to do the work around to put Tiger 10.4.11 on it. Later .......
Well what do you think ??? ..... It's alot to process, take your time,
Please review this babbling I have put forth, it could be written a little clearer, but I have read it over twice and it makes sense as I read it (of course, I know what I meant when I typed it)......
.........Thanks for your time and help. ........wayne146 ....... (all nighter again, going for a nap, back in 4 - 5 hrs.) ...............wayne146 ........ -
My digital signatures no longer work the credential selected for signing is invalid
Adobe Acrobat Pro My digital signatures no longer work I get the error of "the credential selected for signing is invalid" when I try to add my signature
Even my old signatures on all my previous signed documents from years ago are broken now. How do I reset this and get it all up and running again? Ive looked and cant find a solution to this.
HELP!!!I have the same problem, very frustrating to suddenly have digital signatures fail!
-
How does the CBO calculate the selectivity for range predicates on ROWID ?
Hi all,
I'm wondering how the CBO estimate the selectivity for range predicates based on ROWID columns.
For example, for the following query the CBO estimates there's going to be 35004 rows returned instead of 7:
SQL> SELECT count(*)
FROM intsfi i
WHERE
ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH'; 2 3 4
COUNT(*)
7
Elapsed: 00:00:02.31
SQL> select * from table(dbms_xplan.display_cursor(null,null,'iostats last'));
PLAN_TABLE_OUTPUT
SQL_ID aqbdu2p2t6w0z, child number 1
SELECT count(*) FROM intsfi i WHERE ROWID>='AAADxyAAWAAHDLIAAB' AND
ROWID<='AAADxyAAWAAHDLIAAH'
Plan hash value: 1610739540
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 0 | SELECT STATEMENT | | 1 | | 1 |00:00:02.31 | 68351 |
| 1 | SORT AGGREGATE | | 1 | 1 | 1 |00:00:02.31 | 68351 |
|* 2 | INDEX FAST FULL SCAN| INTSFI2 | 1 | 35004 | 7 |00:00:02.31 | 68351 |
Predicate Information (identified by operation id):
2 - filter((ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH'))According to Jonathan Lewis' book, for a normal column the selectivity would have been:
(value_column1-value_column2)/(high_value-low_value)+1/num_distinct+1/num_distinct
But here with the ROWID column, how does the CBO make its computation ?
SINGLE TABLE ACCESS PATH
Single Table Cardinality Estimation for INTSFI[I]
Table: INTSFI Alias: I
Card: Original: 14001681.000000 Rounded: 35004 Computed: 35004.20 Non Adjusted: 35004.20Hi Jonathan,
Some Clarifications
=============
DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
(I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT 1 FROM
INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND S.CTSIT=I.CTSIT
AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV AND
S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
ROWID<='AAADxyAAWAAHDLIAAH'
Plan hash value: 1677274993
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem |
| 0 | DELETE STATEMENT | | 1 | | 0 |00:00:05.94 | 53247 | | | |
| 1 | DELETE | INTSFI | 1 | | 0 |00:00:05.94 | 53247 | | | |
|* 2 | HASH JOIN SEMI | | 1 | 9226 | 7 |00:00:05.94 | 53180 | 783K| 783K| 471K (0)|
| 3 | NESTED LOOPS | | 1 | 9226 | 7 |00:00:00.01 | 10 | | | |
|* 4 | TABLE ACCESS BY ROWID RANGE| INTSFI | 1 | 9226 | 7 |00:00:00.01 | 6 | | | |
|* 5 | INDEX UNIQUE SCAN | PURMAR1 | 7 | 1 | 7 |00:00:00.01 | 4 | | | |
| 6 | INDEX FAST FULL SCAN | INTSFI1 | 1 | 14M| 7543K|00:00:01.73 | 53170 | | | |
Predicate Information (identified by operation id):
2 - access("S"."COINT"="I"."COINT" AND "S"."NUCPT"="I"."NUCPT" AND "S"."CTSIT"="I"."CTSIT" AND
NVL("S"."RGCID",(-1))=NVL("I"."RGCID",(-1)) AND "S"."CODEV"="I"."CODEV" AND "S"."COMAR"="I"."COMAR")
filter("S"."DAVAL">"I"."DAVAL")
4 - access(ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH')
filter("I"."DAVAL"<=TO_DATE(' 2008-03-12 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
5 - access("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
When I force the NESTED LOOP SEMI JOIN the query runs faster:
DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
(I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT /*+ NL_SJ
*/ 1 FROM INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND
S.CTSIT=I.CTSIT AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV
AND S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
ROWID<='AAADxyAAWAAHDLIAAH'
Plan hash value: 2031485112
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 0 | DELETE STATEMENT | | 1 | | 0 |00:00:00.01 | 94 |
| 1 | DELETE | INTSFI | 1 | | 0 |00:00:00.01 | 94 |
| 2 | NESTED LOOPS SEMI | | 1 | 9226 | 7 |00:00:00.01 | 27 |
| 3 | NESTED LOOPS | | 1 | 9226 | 7 |00:00:00.01 | 9 |
|* 4 | TABLE ACCESS BY ROWID RANGE| INTSFI | 1 | 9226 | 7 |00:00:00.01 | 5 |
|* 5 | INDEX UNIQUE SCAN | PURMAR1 | 7 | 1 | 7 |00:00:00.01 | 4 |
|* 6 | INDEX RANGE SCAN | INTSFI1 | 7 | 14M| 7 |00:00:00.01 | 18 |
Predicate Information (identified by operation id):
4 - access(ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH')
filter("I"."DAVAL"<=TO_DATE(' 2008-03-12 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
5 - access("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
6 - access("S"."COINT"="I"."COINT" AND "S"."NUCPT"="I"."NUCPT" AND
"S"."CTSIT"="I"."CTSIT" AND "S"."CODEV"="I"."CODEV" AND "S"."COMAR"="I"."COMAR" AND
"S"."DAVAL">"I"."DAVAL")
filter(NVL("S"."RGCID",(-1))=NVL("I"."RGCID",(-1)))the above post is from Ahmed AANGOUR
Case 1 - . If you check Plan hash value: 16772749938
=====
TABLE ACCESS BY ROWID RANGE| INTSFI For every row access from INTSFI - it fetches a record from INDEX UNIQUE SCAN | PURMAR1
If we check A-rows = 9226
9226 * 7 = 64582 request across the table - perhaps with hint of rowid it fetches exact rows from PURMAR1
in this case i think going for hash join with ordered hints (jonathan as you suggest go for leading hint's instead of ordered) - from INTSFI - PURMAR1 - instead of going for IN clause would get the rows that satifies the ("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
|* 2 | HASH JOIN SEMI | | 1 | 9226 | 7 |00:00:05.94 | 53180 | 783K| 783K| 471K (0)|
| 3 | NESTED LOOPS | | 1 | 9226 | 7 |00:00:00.01 | 10 | | | |
|* 4 | TABLE ACCESS BY ROWID RANGE| INTSFI | 1 | 9226 | 7 |00:00:00.01 | 6 | | | |
|* 5 | INDEX UNIQUE SCAN | PURMAR1 | 7 | 1 | 7 |00:00:00.01 | 4 | | | |My understanding with above plan would change to
HASH JOIN
TABLE ACCESS BY ROWID RANGE| INTSFI
INDEX UNIQUE SCAN | PURMAR1
HASH JOIN
INDEX FAST FULL SCAN | INTSFI1
Which migt be feasible.
2 .
DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
(I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT /*+ NL_SJ
*/ 1 FROM INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND
S.CTSIT=I.CTSIT AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV
AND S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
ROWID<='AAADxyAAWAAHDLIAAH'Ahmed AANGOUR, modified the query by /*+ NL_SJ */ hint, Instead of that in to remove the most of the rows as we join the tables using subquery, I still doubt it
to go push_predicate hints - still doubt it.
Jonathan your comments are most valuable in the above two cases..
Looking forward to calrify my understanding with concepts of indexes for above test cases
- Pavan Kumar N -
How many frames should I cut out each second to get a old film look?
Hi,
What is the general rule of thumb (if their is one) of how many frames should be cut every second to achieve a choppy old film look? Or maybe it's not every second? What do you guys do?you will get a more realistic look if you chop out frames manually
dump the playhead arbitrarily on the time line insert a cut nudge the playhead either i or 2 frames on and cut again discard the frames and either leave the black or butt the clips up for a "skip".
this really doesn't take long to do and is better than a predetermined sequence of chops made by a filter.
CGM do a free filter for aged film to add the hairs, navel lint, boogers etc . . -
Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"
Hello all,
I have moved this question from the Windows
Server General Forum accorfing to the suggestion from Mr. Justin Gu
I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
I can find the Filter function with the following operation.
Mr. Justin Gu wrote:
> You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
In the Properties dialog box, click Filter and
then select ‘Edit…’. You will be> able
to see the Filter type and Filter data in the Filter dialog box.
What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.
I'm looking for the same information.
Maybe you are looking for
-
Video camera doesn't work after installing IOS 7
I can't use video camera with iPad 2 after upgrading to IOS 7. Anyone knows why?
-
Errors encounted during installation. (U44M1P7)
Happens when I try to update: 06/18/13 14:11:38:326 | [INFO] | | OOBE | DE | | | | 10644 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* =*=*=*=*=*=*=*=* 06/18/13 14:11:38:326 | [INFO] | | OOBE | DE | | | | 10644 | Vis
-
HT3775 How to burn cd's on IMac
I burn DVD's using disk utility on my imac but cannot burn Cd's how can I burn Cd's?
-
Unable to turn Wi-Fi on-Mac Book Pro Mid 2010
I am unable to connect to Wi-Fi because the computer turns the Wi-Fi off and will not allow me to turn it on through system preference. Also the fan is running continuously. I have to restart the computer several times because the mouse will lock up.
-
usi ng Windows XP