Filter sweep volume issue

hi. i'm automating the high cut frequency on the channel eq to do filter sweeps. every time i go to write the automation the volume of the track skyrockets. anybody know why? i had my song mixed all nice and it's getting screwed up.

I'd guess either A) there is volume automation data written for the track that you don't know about or B) you're using a midi device to play in the filter information, and it's sending volume automation or CC7 to the track C) Your project involves an outboard MIDI device that is sending CC07 back to Logic.
A) From the Arrange window select the "View" pulldown and then select "Automation." (Default I think is Key Command "V"). For the track you are having problems with, select "Volume" from the little box on the left. If there's no volume automation for the track then you should see a dotted line and a "*" at the beginning of the track. If the line is solid with a solid dot, then volume automation has been recorded and will jump the volume of the track when you turn on automation.
To fix: While you are view the Volume automation (if that's the problem) select from the pull-down menus on top, Options -> Track Automation -> Delete all currently visible Automation Data of Current Track. This will clear the volume data. Just make sure you don't touch the volume fader again when you have Touch/Latch/Write etc switched on.
B) & C) If the problem is an input device it gets a little trickier, because it depends on the setup of that device and your Track Automation Settings. Start by opening Options -> Track Automation -> Track Automation Settings then select "Edit" from the bottom of that screen. Check to see if anything on your controllers has been set to control volume. highlight and delete that, and you may fix the problem.
Also check the settings of any keyboards hooked up to your computer. If you're sending volume data out to them (CC07), they may be passing that CC07 info back to your computer. You'll need to edit the settings of that midi device to stop this.
e

Similar Messages

  • Serious Volume Issues : HELP!

    Good Morning,
      We have had Fios for about 8 month and since we signed up have been having serious volume issues.  When we turn on the tv and the fios (HD Box w/DVR) the volume will turn on and it will be in a mono tone with no bass just very bad sounding, other times we turn it on and there is no sound.  To get "normal sound" we typically have to turn on and off tv a couple times to get to work.  If we turn on tv and have "funny sound" we can flip to DVR and watch tv with perfectly fine sound.  We can also turn on DVD player and watch tv with perfectly fine sound.  This makes me think it's fios or the box??  We have had a refresh to our box and we just recieved a new box and it is still happpening!!   My husband has switched the HDMI cables to the alternate port on our tv (I think that is what he said??) and nothing helps.  Our tv is a Samsung LCD and it is maybe 2 1/2 years old at the most.  We have never had any issues with this with Directv and can't figure it out.  Does anyone have any advice?
    Our second issue is on our other tv when we turn on the fios box and attempt to watch tv, Spanish music comes through the subwoofer of our sound sound.  Again never an issue until Fios.  My husband bought a RF (????) filter and no such luck.  Any suggestions?
    Thanks as we can not watch tv in our home without it being a huge pain in the butt!

    seeing as how the issue is the same with 2 different HD-DVR's I would assume it is one of the many HDMI issues that occur with the motorolla boxes... try another means of  cabling for audio... such as composite (red/white) or digital audio cable
    as far as the other box is concerned, with the spanish audio..... that box/TV probably has the SAP turned on.... on the box, go to Menu >  Settings > Language > Audio Language.... and switch to English preffered... if it is your TV, consult the owners manual for specific instructions on how to change the setting on the TV.
    Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

  • Volume issues with GE60 Apache Pro-003

    I recently picked up the new GE60 Apache Pro notebook, and I've been running it for about a week now. I should of course mention that I also did a clean windows install after adding an SSD to the system (and now can't figure out how to add back that cool MSI panel that was there when I first got the system).
    Anyway, I've noticed that there seems to be volume issues with the system no matter WHAT kind of settings I tweak, or drivers I try to use. With all sliders up at maximum, the volume levels still never seem to surpass around 50% (from observing the volume gauges in the Windows Volume mixer panel). My previous notebook's speakers put out significantly higher volume, and was also able to put out far more power to my headphones (Audio Technica ATH-M50).
    Any possible ideas for the cause and solution to this problem? Thanks in advance, and let me know if there is anything else I need to mention.

    Quote from: darkhawk on 02-April-14, 20:44:14
    What are you using to gauge the '50%'? MP3's? Windows sounds? or what?
    Pretty much everything. Music, games, online videos... According to the volume mixer, the audio levels never seem to pass 50%. The grey bar bounces to the peak, but the green bar never seems to pass the 50% level. It's as if there's some sort of limiter in place I'm not aware of. And since I reformatted the notebook as soon as I got it, I was never able to see if the volume control worked correctly before the reformat.

  • Has Anyone sent the iphone in for repair for the low volume issue ???

    I called apple last week and spoke with a level on support agent. After he could not solve the volume issue they sent me to level two. the level two tech took the call and told me right away that they were going to send me a new phone. I give him my credit card as a deposit so they would send a new phone and when I had the new phone I could then send the old one back. Well after a few days I called to check on the phone and found out he never placed the order and now they say they want to send it for repair some place in Texas. They did offer the rent me a phone for 29.00 while I wait for repair. I told them no rental for me. How bad is that, a hardware issue and they say they are going to send a new phone and never do then they offer a repair and to rent me a phone. I was wondering if anyone had sent in the phone for this issue yet. I do not think I am going to send it in and I think I am going to get my refund while I still can. I just thought I would check to see if anyone had sent the phone in for repair yet and how it worked out.
    Andrew

    How are any of us (Apple users just like you) supposed to have any idea?
    We weren't there.  We don't know the specifics of what happened to your iPhone.
    Ask the store that repaired it.

  • Is anyone having volume issues with the new Iphone 4S?

    Is anyone having volume issues with the new Iphone 4S?

    Yes, the volume on my iPhone 4s will max out without me touching any button or setting.  When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons.  It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.  
    Anyone else seen this?

  • Garageband/logic volume issue

    ok so.... i basically finished the pre-production of my album and everything sounds absolutely fantastic.... through garageband and logic that is. when i export the song to itunes or my desktop, everything is very distorted. i understand that this is a volume issue. when i have "auto-normalize" on, everything sounds just the way it should but very quite. so, in an effort to make it louder, i turn off this option. the volume level returns to normal but everything is distorted. how can i fix this? can i have some examples of EQing, compression, and filtering? i am recording through a Lexicon lambda into my iMac 24 inch.

    none of the tracks clip at all throughout the songs. ive messed around with all EQ settings and compression but it still sounds distorted when i export it. all im trying to do is export the song and the same quality it was at in garageband... if i out the song through logic or protools, will it help my problem?

  • Volume Issues - Too Loud & Too Soft

    This is a problem I've had for awhile now. It's getting unbearably frustrating. Volume issues, where the default value for sound ranges outside what the iPhone should be capable of doing. So for example if the volume goes from 0% to 100%, my phone will be completely random and range from -50% to 150%.
    How can it be less then 0% you might ask, when moving the slider mid way the volume is completely off and any lower doesn't make a difference, then I'll receive an email notification and BAM the volume goes up 300% and it's so loud it feels like the speaker is going to explode. This problem happens at any time but mostly after or while using headphones or car bluetooth.
    Example of my issue in action, I'll plug AUX in the car into the phone, play music, driving along, randomly goes to half volume. I'll turn up the stereo to compensate, one minute later I'll get an email and the volume resumes to normal operating volume and I almost sh** my pants in fright.
    Another example is I'll be watching a video late at night before bed on youtube or something with the volume all the way down, then the next morning my phone alarm will not sound or it will but insanely softly. The work around for this is to play music right before locking my phone with the volume up all the way. Just move the volume up all the way, play > pause and there you have it, volume working agian.
    And one last example, randomly it goes really really loud. Like how is this possible loud. I'll dial a number and when pressing the buttons instead of a beep beep beep. I get fog horn BEEEEEEP BEEEEP BEEEEP. But as soon as the call starts the volume sets itself back to normal. Kind of like how when playing music without head phones with volume on max sets it back to normal.
    Things you should note:
    Ringer volume has been locked to maximum, but quite often won't abide by this rule.
    I've reset the phone and setup as new iPhone, problem still occurs.
    Please don't give a solution like, "Have you checked your sound volume in settings". I'm not stupid.
    Also, please don't give a solution unless you understand the difference between "Notification and Tone Volume" and "Media Volume".
    Other then that. Please help, this is driving me mental.

    I recently did the last firmware upgrade for my ipod nano 5th gen and can't set the maximim limit.
    It can be set, but wont stick and I can still go above the limit.
    Did something break with the firmware upgrade.

  • Ipod & Itunes Volume Issue

    Hi,
    I am having a problem with my iPod volume. It was not loud enough when the volume was turned up even halfway (barely audible). Only when I crank the volume to the max is it loud, but when I turn it down, to even three quarters it is not loud enough.
    So, I ended up updating to the latest version with the ipod updater, and added some more tracks to my ipod from iTunes. Now, iTunes is doing the same thing when I listen to the tracks on my computer! Even when I play a cd through iTunes, it is not very loud, but when I play the same cd through Windows Media Player, the volume is correct, and the sound is great.
    So, I think the volume issue on the iPod is now transferred to iTunes.
    How do I fix this?
    I have a brand new computer, and havent had any problems with this before. I have the 60GB iPod Photo.
    thanks!
    dell inspiron 9300 Windows XP
    Windows XP Windows XP
    Windows XP   Windows XP  

    No, I checked that. Its weird, in that the volume was too low on the iPod and it was fine on my computer, but when I updated my iPod it transferred to iTunes and now it is acting the same way.
    I dont know what else to try! help!

  • MacBook Pro Volume Issue

    Hi, All.
    I have a MacBook Pro with a 15" monitor, 2.8 GHz Intel Core 2 Duo processor. Currently working with OS 10.6.8.
    I'm not sure since when, but I'm having this issue:
    Even though I turned the volume off, every time I shut down and boot up, or restart, the machine, the volume automatically goes up to about the middle of the indicator. I know it may not be a critical issue, but sometimes I forget about the volume problem, the loud sound makes me jump and it's quite annoying. (Especially in public.)
    I'm wondering if anyone else is experiencing the same problem and if there is a way to solve the problem.
    Any information will be appreciated.
    Best,

    Hello, tjk.  Thanks for your reply.
    After you told me, I did PRAM resets several times, but unfortunately I'm still having the same volume issue.
    I've been doing online researches for while to find the solution for this problem, but I don't see any other people having the same problem. Probably this is a new issue?
    Thanks.
    drbonzo

  • MBP 15' Volume issues & shut down OSX Yosemite

    I just purchased MBP 15' spent 4K total 1TB SSD and did my Time Machine Restore of my previous system and now i'm having Volume control issues With Volume button not controlling Volume at all and when i try to Log out of user account  to shut down the computer it just goes to my Desktop pics and doesn't shut down or restart i constantly have to force Power down,,,took to APPle store showed them the issue they gave me another brand new system out the box right there in the store took it home did Time Machine again all night and low and Behold the vey same issue Volume button is crossed out with an Circle and have to be going back and forth to system Preferences Volume output control & use that volume control which keeps greying out on and off,somethings definitely wrong here...Cant Shut down without force powering off the laptop and volume issues is there anyone who knows whats going on here Volume gets really low also and then jumps to higher volume back & fort.el help help anyone!!!!

    You can try a PRAM reset:
    http://web.archive.org/web/20140711222006/http://support.apple.com/kb/ht1379
    However since this is a new MBP, you really should sort this out with the Apple genius bar technicians.  You get a warranty with the MBP, so I recommend that you use it.
    Ciao.

  • Volume Issues Palm 800

    Hello Palm users and tech(s) alike...  Well, I'm sure others can relate to low volume issue with their palm... Although I have my device turn up to the Max, I'm still having trouble hearing my phone conversations and watching TV on my device.  I have purchased many Bluetooth and headphones and still I'm unable to increase the volume output.   I'm aware of one particular patch for volume issues related to Bluetooth devices(incoming calls the volume goes down) however, does anyone know of a work around for increasing the volume output...  If so, reply back to [email protected]!
    Thanks,
    Reginald (Seattle, WA)
    Post relates to: Treo 800w (Sprint)

    Hello 800 users... I found a  Sony Ericson bluetooth headset (earbud style) for around $120 and it works GREAT!  I would recomend this stlye (earbud) for everyone!
    Reginald
    Post relates to: Treo 800w (Sprint)

  • Anyone having any volume issues during a call?

    I can barely hear the person on the other end of the line...what do I do?  I can't possibly take it back to the store for a new one can I?

    You will never guess why I posted this issue!  I bought this phone for my wife,  the phone came at 11:11am this morning, so I left work to wait for FedEx because she was sooo excited to get it.  I dropped it off to her at her shop and she connected it easily via iTunes.....yet she started calling me with volume issues, stating, "I can only hear you on speaker phone"....she begged, "please call VZW, I need a new phone".......I told her, "Hon, they are not going to send you a new phone now, with all the orders on the 9th and 10th".....she states, "Can you take this and go exchange it at the store?".........So I tell her, "I'll look at it later", which upsets her more.........she just called me and said, "Its working now....you know that "plastic" that comes on the phone, it was on the earpiece.".......are you KIDDING ME!!!!  All day, everyday with this girl.....I love her.

  • Volume issues with third-party tele-conference service

    A client is requried to join a conference call hosted by third-party Genesys Conferencing (866.436.3797). My client accesses the teleconference through the speakerphone of their Cisco SPA525G2, lcoated in a Board Room. 
    They have a UC-540 with the next to lates firmware and they have no other volume issues with any call on this or any other speakerphone.
    Any ideas?

    You could try this link here it will show you how to use the HH off another router as a slave and still be able to use BB talk
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • 2G iPhone Volume Issue

    When I make a call or receive a call I can't hear very well when holding the phone ot my ear. I've pressed the volume toggle on the left side and it shows the volume going up but it doens't get any louder. Help I just got the phone 12/24 and I really can't use it to talk on!

    this post saved my sanity. I, too, tried to keep the plastic on the phone to protect it, not realizing it was causing the volume issue. Thank you for the info! (My mom and co-workers are still laughing at me!)

  • Speakphone volume issues

    I don't know if its just me but it seems my speakerphone volume is very low at its max volume. Yes, I can hear the caller but comparing to the volume of my nextel phone, its like half as loud. I'm a HUGE speakerphone guy, and when i'm in the car or somewhere around a little noise, it becomes very hard to listen to the caller. Of course at home in a quite eviorment, its very easy.
    I went to the apple store and had the phone replaced, upon taking it home an activating it, I have the same issue, i'm now thinking this is the way the phones were made. How the **** did this phone get pass QA or the beta test group is beyond me.

    It seems as though several people have volume issues...along with myself. Many people seem to agree it is a problem with only the 8 gig phones...which I had. I tried all of the fixes that were posted, took it to the Genius Bar and they replaced it...still had problems with both the ear volume and speakerphone, a very miniscule amount of improvement with the new replacement. Then talked to tech support, did the reset procedure and restore with iTunes...no help. I took it back this evening for a refund and they waived the restock fee. This was a very sad and difficult decision for me! As soon as I got back from the Apple store, I started looking for more new fixes or some sort of solid info on an update that might fix it. Even the Genius bar told me tonight, to wait for 2.0! I do have to say, I am probably one of the very few that only bought this phone for the phone feature and the way it looked! I truly could care less about the other 'lacking' or 'inadequate' features others are having issues with or complaining about. I am one that has never sent a text message, email, had a to do list, calendar, etc. on her cell phone. I have only used my phone to make/receive calls and play Tetris! I have not even had a new cell phone in years, so this was a splurge and a wonderful, fun and exciting new gadget! The ONLY complaint I had was the volume. That was the deal breaker for me. I cannot wear headphones, as the Genius bar suggested or use a blue tooth. I use the speaker phone 80 percent of the time. I always am in a noisy environment and have never had volume issues with my Nextel phone...(just dropped calls! Ha) This was, needless to say, a big disappointment that of all things that could have been a problem, it had to be the volume...the one that is most important to me. FYI, when I went to the Genius bar, I asked if anyone else was coming in with this problem and they said only one...however, the day I was in there, four people were waiting to discuss their volume issues with the phone! I don't know and I don't think Apple even knows if this is even a situation that could be resolved with a software update. Best of luck with your situation and all the rest who have that issue. I'm going to wait it out for hopefully a solution that will be found soon! I can imagine going past the 14 day refund period and finding out the volume problem cannot be solved!

Maybe you are looking for