Filter the SSID for Lobby Admin

Hi,
I've created a sponsor portal on wlc 5508 by using LobbyAdmin account, but I noticed that the person who will have access to this portal is  able to assign any vlan to the visitor because there is a drop down list which displays all SSID which are configured on the wlc. Can we avoid this and limit the drop down list?

No it's not. The lobby admin will see all the SSID's. nothing you can do here. Others have also asked this in the past and nothing has changed.
Sent from Cisco Technical Support iPhone App

Similar Messages

  • How can I filter the Values for the dropdowns in webdynpro

    I have given data source to table, but as there are some repetitive values in table of dropdowns, I want to filter the Values for the dropdowns in webdynpro.
    How can I do this?

    I have given datasource to table in properties of table.
    I have 2 different dropdowns for different columns in the table.
    if the size of the table is 20 I get all the values populated in the dropdowns.
    In these values, there are some repetetive values which I dont want to appear.
    I can display it by making loop and can select from the values.
    the problem is how to set the new values to that drop down again using context?
    eg
    dropdowns have,
    presales activity
    presales activity
    presales activity
    presales activity
    presales activity
    I need to filter the variable element and put back it in dropdown.
    Thanks and regards
    Hanif Kukkalli

  • How do I manually reset the SSID for my e609n?

    I have an HP Officejet 6000 Wireless (e609n) that was previously used at another location and with a different network. Now I have moved and I am trying to set it up wirelessly with the new location's router, and the setup keeps hanging. I can set up the USB connection, but not the wireless one. And I can access a Canon printer on the same network wirelessly. I have tried total uninstall/reinstall, intall in Safe Mode w/Networking, changing from USB to wireless, and everything I can think of to no avail. The only other thing I can think of is that the SSID is set to the old system and is preventing me from changing it; however, the limited info I have gleaned from the net has not given me anything workable for options.
    Does anybody know how to manually reset the SSID? (Or, programmatically do so through the USB?)
    Much thanks in advance for any help!

    Hi,
    Just treat it as a brand new printer by reset it back using the following steps:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01852548&cc=us&dlc=en&lc=en&product=3866951&tmp...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Finding the url for Portal Admin console

    Hi all,
    I got a portal .ear file from my team member to deploy on an env with Weblogic portal 10.3.2. The Application is deployed fine and is in Active state.
    Now I need to find the exact url for the portal Admin console. I am not able to find which xml file to look into under the ear file to find the url for the portal Admin console.
    thanks in advance..
    PMR..

    Hi All
    I am interesting to work in weblogic administration but i dont have experiance.
    Now i am working in java/jee application which is deployed in weblogic 10.3.
    I know the deployment in weblogic.
    Can any one help me how to learn weblogic administration.
    Thanks
    Ram
    Edited by: user10979302 on May 2, 2011 10:33 PM

  • Safari 5 seems to have slowed the OS for my Admin user account

    After installing Safari 5 (now 5.0.2), and after a few Safari hangs and force quits, my OS for my Admin user account has become slow. Opening folders and seeing the contents is slow; moving small documents from folder to folder is very slow; cutting and pasting text in a MS Word document sometimes takes two or three tries, as the text highlighting cursor function has slowed. (Interestingly, Safari's basic click and pageload functions seem to work fairly normally, but with the same highlighting and copy/paste slowness that affects all other programs. Also, my mouse pointer moves quickly as per normal.)
    However, I created a new user account as a test comparison and found that the new user account is NOT slow. It works perfectly fine.
    Any thoughts on what I should do? Is my original Admin account corrupted? Is it possible to simply move my personal files (Word docs, iTunes songs, bookmarks) to the new user account and then delete my original Administrator account?
    What should I do? Thanks everyone.

    Well, it was worth a shot.
    How full is your hard drive? Always a good starting point for diagnosing slowdowns.
    Sometimes running periodic maintenance scripts helps, because it cleans some caches that a Safari reset won't. The scripts are supposed to run automatically in the wee hours of the morning when most people are computing, but the problem is that they only run if the computer is on and not sleeping. Not too realistic.
    This article in an excellent series of "keep the Apple sweet" articles talks about the scripts and how to run them manually:
    http://thexlab.com/faqs/maintscripts.html
    They are less important in later incarnations of Mac OSX as some o the tasks they do were shifted to start-up, but doing them is worth trying.
    Also use Activity Monitor to check for a runaway background process. It's possible that this could affect only one user account. If you've not used Activity Monitor before, make sure you change its "Show" option from the default of "My Processes" to "All Processes" or you might miss some nasty troublemakers. Also click in the "%CPU" column header to sort by processor usage. With no user apps running, (basically an idling computer) no single process should demand more than ~5 percent of the processor. Let AM display for a few minutes while you watch it, as some processes toggle back and forth as they activate.
    Running any anti-virus software? Most does more Mac-harm than Mac-good.
    Keep us posted!
    A

  • I cannot remember the password for my admin. I have an iMac OSX 10.9 any help??

    I cannot remember my password for my admin login. I have an iMac OSX 10.9

    Welcome to Apple Support Communities
    First, reset the password with your Apple ID > http://support.apple.com/kb/HT1274
    If it doesn't work, reset the password with Recovery > http://discussions.apple.com/docs/DOC-4101

  • How to Filter the lovRowSetInfo for LOV

    Hi,
    I am developing Java Application using Swing JDeveloper 3.1. My problem is how can i filter the contents of LOV so that only the nessarry data that match the condition only will display.
    Below is my solution:
    lOVRowSetInfo.setQueryCondition("employeeCode = 'AA'");
    lOVRowSetInfo.executeQuery();
    lOV.setRestrictedQuery("infobus:/oracle/Session1/employee/employeeCode", null);
    lOV.show();
    First i try to filter the lOVRowSetInfo which is fix into the LOV. I filter it so that only employee code which match the AA will display. But after i press a button to show the LOV box, the data that shows in the LOV seems like not filter at all. It still display all the value of the employee table.
    Can anybody help to solve this probelm ?
    From,
    Teeming

    I have the same challenge. Any help would be greatly appreciated.
    Brad

  • What would be the impact for disabling admin$, IPC$, Admin Share$

    Can any one update,
    what would be the impact by disabling admin$, IPC$, on Members server.
    we have windows server 2008 r2.
    Only we need to disable memebrs server not on domain controller.
    D.K Konar. NMS

    Hi,
    Disable Administrative Shares permanently disable: IPC$, ADMIN$, C$, D$, E$
    Batch Script Code:
    REG ADD “HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters” /f /v AutoShareWks /t REG_DWORD /d 0
    REG ADD “HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters” /f /v AutoShareServer /t REG_DWORD /d 0
    REG ADD “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa” /f /v restrictanonymous /t REG_DWORD /d 1@echo.
    net share admin$ /delete
    net share C$ /delete
    net share D$ /delete
    net share E$ /delete
    net stop LanmanServer
    sc config LanmanServer start= disabled
    Auto Share Disable Script Download: http://siberblog.org/wp-content/uploads/2013/10/AutoShareAllDisabled.rar
    Auto Share Enable Script Download: http://siberblog.org/wp-content/uploads/2013/10/AutoShareAllEnabled.rar
    Site Link: http://siberblog.org/index.php/windows-yonetimsel-gizli-paylasimlari-devre-disi-birakma/
    www.siberblog.org

  • Unable to filter the data for multiple time selections by dimensions

    Hi to all,
    I am new in MDX, i have a problem with my MDX query.
    Calculated Member Logic:
    SUM((OPENINGPERIOD([Date].[YQMD].[Year],[Date].[YQMD].[Month].&[2010-12-01T00:00:00]):[Date].[YQMD].Currentmember),[Measures].[Paid Amt])
    Mdx Logic EX:
    With Member [MEASURES].[Received_Amount]
    AS
    SUM((OPENINGPERIOD([Date].[YQMD].[Year],[Date].[YQMD].[Month].&[2010-12-01T00:00:00]):[Date].[YQMD].Currentmember)
    ,[Measures].[Paid Amt])
    SELECT {[MEASURES].[Received_Amount]} On Columns
    ,[Date].[YQMD].[Year].members On Rows
    From [Financial]
    If i select multiple time periods in Rows, the query working fine.
    but if select multiple periods in where clause it is not responding.
    With Member [MEASURES].[Received_Amount]
    AS
    SUM((OPENINGPERIOD([Date].[YQMD].[Year],[Date].[YQMD].[Month].&[2010-12-01T00:00:00]):[Date].[YQMD].Currentmember)
    ,[Measures].[Paid Amt])
    SELECT {[MEASURES].[Received_Amount]} On Columns
    ,[Speciality].[Specialty Name].[Specialty Name].members On Rows
    From [Financial]
    Where {[Date].[YQMD].[Year].&[2012-01-01T00:00:00],[Date].[YQMD].[Year].&[2013-01-01T00:00:00]}
    Note:
    Each of them is considered from the minimum date in the database to the selected time.
    And also the data has to be filtered with respect to each drill down dimension.
    If select multiple time periods the same formula has to be applied with respect to the dimensions.
    Kindly help me to get out of this problem
    Best Regards,
    Nagendra

    Hi David,
    Thanks for your response.
    I have a measure, i have to get received_amount in the database from the database starting period to my selection period. Later i have to check by dimensions using same measure. if i select any one period by dimension it's coming, but if i select multiple
    periods in filter level by dimensions it's showing no records.
    For Ex: 
    I have four years data in my database (2010-2013).
    In 2010
    Bill_Amt
    Bill_Date  
    Specialty received_amount
    1000
    10/01/2010 4
    600
    2000
    04/08/2010 2
    1000
    In 2013
    Bill_Amt
    Bill_Date Specialty
    received_amount
    1500
    22/02/2013 2
    1200
    2000
    14/03/2013 1
    800
    In the above scenario,
    By Period:
    if i go by period i should get,  
    Jan'13  ---> 1600
    Feb'13  ---> 2800
    Mar'13  ---> 3600
    Specialty By Single Period:
    If i select Jan'13 by specialty
    Specialty
     received_amount
    2 1000
    4 600
    If i select Feb'13 by specialty
    Specialty
     received_amount
    2 2200
    4 600
    If i select Mar'13 by specialty
    Specialty
     received_amount
    1 800
    2 2200
    4 600
    Specialty By Multiple selection Periods:
    The result should be sum of the individual selection periods by specialty as follows,
    If i select Jan'13 & Feb'13 by specialty
    Specialty
     received_amount
    2 3200
    4 1200
    If i select Jan'13 , Feb'13 & Mar'13 by specialty
    Specialty
     received_amount
    1 800
    2 5400
    4 1800
    Regards,
    Nagendra

  • Need info on the approach for building admin forms for authoring

    Hi,
    I have a requirement to store the content in the content repository. I have two levels of data to be stored i.e. continents & countries; both continents & countries have their individual properties; continent contains countries node. I need to build a mechanism to store the content at a particular location in the JCR. The content authors should be able to add, edit or delete the continents & countries.
    What's the best way to build this admin form? Should the custom node types be created? Should a custom action type to be built? To support dynamism on UI i.e. add, edit & delete in a single form - how can it be done efficiently?
    If someone can provide me pointers, I will start with my build. Let me know if you need more information.
    Thanks,
    Chetanya

    Justin,
    The approach you listed sounds easy to implement.
    However I want to understand why out of all we choose cq:Page and why not nt:unstructured or sling:orderedFolder? Can sorting be enabled in this case?
    Also I have various scenarios where I need to store different form of data. Another example is storing product information in a alphebetical manner. There are lot of products to be stored and needs to be displayed in a tab format. The tab looks something like this A-E, F-L, M-S, T-Z, which should be configurable. Do you recommend creating one page per alphebet e:g A, B, C... and add all products (component) starting with A under page A, and so on? Or is there a better way to implement?
    Can something like calendar event be used here where in year, month and day node gets created first and then the event node is added. If so, in the above scenario how can the nodes A, B, C... be autocreated when products are added? Also the products need to be always sorted.
    Thanks,
    Chetanya

  • AnyStandard functionality in F110 to filter the invoices for certain amount

    Hi All,
    I have a requirement like  - We need to process the batch payment based on the Value of the Invoices accounted in system.
    Any single/consolidation of  invoices for value exceeding Rs 50000/- needs to be processed through separate batches under T Code F110
    Vis-à-vis any single invoices whose value is less than Rs 50000/- also needs to be processed through a separate batch. The system should list out all the transaction based on the Value of the Invoices covering Rs 50000/- under T Code F 110
    Do we have any standard functionality where in we can restrict the invoices till certain amount.
    Kindly help
    Regards,
    Mercy

    Dear,
    You can only chose 'free selection' tab in F110 for a single value by 'field name'. To do that you must change yours invoices in FBL1N or FBL5N. Run one of these reports for your open items dispalay and sort by amount. Block in mass all open items with amount exceded and go to F110. This is a tip to have your desired result. I hope it helps.
    Regards

  • What is the URL for webdispatch admin page?

    I cannot figure out it. Please help. Thanks a lot!

    I did search but did not see the URL you gave.
    I try your URL but get "you are not authorized" immediately after hit the
    return.
    What is wrong?
    If I try https://host:443/msgserver, I get 404 not found. Why?
    Thanks for you help.

  • Lobby Admin for guest account creation - Automation of account creation

    hello all,
    i'm sure the creation of guest accounts on the lobby admin page is a painful process for all involved - for us, it involves a process like this:
    visitor asks for wifi > receptionist phones IT > IT creates account> IT phones receptionist with login details.
    I would like to know whether it's possible to speed up this process either:
    1) receptionist is able to click a few buttons, type the name of a visitor (so we know who used particular the guest ID), then is able to generate an ID and password immediately, which can then be printed onto a ticket printer of some sort.
    2) visitor simply connects into the guest network, has to register (name and email) and automatically gets connected.
    are any of these possible? or any other option I could take?
    Thanks

    Why not just have the receptionist create the account via the Lobby Admin login?  The point of Lobby Admin is such that an elevated end-user (receptionist/security/etc) can log in to create a guest account without having to interact with an "admin".  There's no point in having your IT staff handle the Lobby Admin logins.
    Some of the other items you are asking for would be a better use-case with Cisco ISE solution.

  • Lobby admin - how to restrict options?

    Is it possible to simplify web-interface for lobby admins? Now by default they have too much choices: "User name" form field, "Generate password" checkbox, "Password" and "Confirm password" fields, "Lifetime" and "WLAN SSID" and "Description" ... Too complicated.
    I would be happy to restrict Lobby admins to "User name" field, and restrict their ability to choose "WLAN SSID" (I have a couple of WLANS, of course, guest users will not get rights for the wrong WLAN, but Lobby admins are able to set WLAN wrong). I would require password generated by my WLC rather then allowing my lobby admins typing "Password1" etc. in this form.
    Any advice?

    You've generate password that generates random password.
    only webauth guest wlans are shown for lobby admin.

  • Can not filter the data with the extended class

    Hi,
    I have a quick question about PortableObject format. I have created a class which extends PortableObject interface and implemented serializer methods as well. I have updated it in the pof-config.xml file as well. If I insert the objects of this type of object in the cache, they get inserted properly and I can filter the values based on the getters defined in the class. Everything works fine here.
    Now, I am trying to extend the existing class that I have. We have our custom API which we have built for our domain objects. I need to store these objects in the cache. So, naturally I need to implement PortableObject interface to do that. So, instead of creating a new class with new set of getters and setters and local fields, I am extending our domain class to create a new class which implements PortableObject interface. Instead of defining the local fields and getters and setters i am reusing the ones provided by my existing class. Now, I can insert the objects of the new class to the cache. But I can not filter the values for the objects of this new class.
    Let me show you what exactly I am trying to achieve by giving a small example:
    Domain Class:
    class Person
    private String person_name;
    *public String getPerson_name() {return person_name;}*
    *public String setPerson_name(person_name) {this.person_name = person_name;}*
    The new class implementing PortableObject interface:
    class ExtPerson extends Person implements PortableObject
    public static final PERSON_NAME = 0;
    *public void readExternal(PofReader reader) throws IOException{*
    setPerson_name(reader.readString(PERSON_NAME));
    *public void writeExternal(PofWriter writer) throws IOException{*
    writer.writeString(PERSON_NAME, getPerson_name());
    *// And HashCode, Equals and ToString methods, all implemented using the getter from the Person class*
    So, if I create a new class ExtPerson without extending the Person class and write all the methods, store the objects in the cache and perform the following query, I get the size printed
    System.out.println((cache.entrySet(new EqualsFilter("getPerson_name","ABC"))).size());
    But if I use the extended class and insert the values into the cache and if I use the same query to filter, I get 0 printed on the console.
    System.out.println((cache.entrySet(new EqualsFilter("getPerson_name","ABC"))).size());
    So, can anyone tell what exactly is causing this?
    Thanks!

    Well, just a quick question. It seems that I can not get ContainsAnyFilter or ContainsAllFilter working.
    EqualsFilter is actually working properly.
    I am preparing a Set of Strings and passing it to ContainsAnyFilter or ContainsAllFilter and it is returning me 0 records.
    E.g.:
    Set<String> setStr = new HashSet<String>();
    setStr.add("ABC");
    setStr.add("DEF");
    System.out.println((cache2.entrySet(new ContainsAnyFilter("getPerson_name", setStr))).size());
    I get 0 in my output
    If I try this:
    System.out.println((cache.entrySet(new EqualsFilter("getPerson_name","ABC"))).size());
    System.out.println((cache.entrySet(new EqualsFilter("getPerson_name","DEF"))).size());
    I get 1 for each of the query.
    If I club all these EqualsFilter in a Filter[] array and create an AnyFilter or AllFilter and pass it to the query, it works fine.
    List<Object> lst = new ArrayList<Object>();
              lst.add("ABC");
              lst.add("DEF");
    Filter[] filter = new Filter[lst.size()];
         for(int i=0;i<lst.size();i++)
              filter[i] = new EqualsFilter("getPerson_name",lst.get(i).toString());
    AnyFilter fil = new AnyFilter(filter);
    System.out.println((cache4.entrySet(fil)).size());
    I get the desired result here, which is 2.
    Am I missing something here?

Maybe you are looking for