Filter using "List" is not working when Exporting Data

Hi All,
We have built a BI publisher report with 10 different layouts, each layout is corresponds to one separate report. In one layout we have one table view and "List" tool bar to select the required data. When we select a particular value in the list, the report correctly displays data of the selected value. But when we export this data to an excel sheet, it downloads the entire data irrespective of the selected value into the excel. Is there any way to export only the selected data?
E.g.
Consider we have a list for Year which has 4 years as values.
2008
2009
2010
2011
When we click on 2008, the report in interactive mode displays the values w.r.t 2008 but when we export it to excel, we see the data of all four years.
Appreciate your support in advance.
Thanks,
Karthick

Hello All,
Anyone came across the above scenario? Please advise.
Thanks.

Similar Messages

  • Where used list is not working for IMG nodes/Document   in solar01

    hi experts
    In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab.  ( like same IMG node  -  define order types used in different business process configuration tab )
    when i use " where used list " from the configuration tab , its not showing the IMG objects  used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
    I need to find out the same IMG objects/ document  used in the same project using the " Where used list " button.
    Please provide your answers
    Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
    Thanks
    Sol man

    Hello there,
    I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
    You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
    e.g:
    Here I created a document in this node:
    Then I added it as a link here:
    and as a copy here:
    When I go back to the original node and use the where-used, it'll only show the original and the link:
    This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
    best regards,
    Fabricius

  • Reply to all using ItemReply does not work when specifying messageid

    Hello everyone,
    I am trying to use the ItemReply token to perform a "Reply to All"
    action on a mail item with a known message identifier and include the
    original message text in the response. According to the documentation,
    the call should be:
    ItemReply(7;1;"message-id")
    Still, when I execute this token, apparently only a normal reply action
    is performed because only the original sender is listed as recipient.
    (The message text is properly included)
    However, when I manually select the message in the GroupWise client
    first and then execute the same call without specifying the message id,
    all recipients of the original mail are listed in "To:" as expected:
    ItemReply(7;1)
    Could it be that the "ReplyTo" parameter is ignored or does not work
    when a message id is specified as parameter? (Setting "IncludeText" to 0
    does not change anything)
    Thanks in advance and best regards,
    Peter Hofer

    Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
    According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

  • PDF conversion with PDF2ID; Hypertext not working when exported back to pdf.

    I have done a PDF conversion with PDF2ID, however Hypertext is not working when I exported it back to pdf. I am using the PDF2ID plug-in program to redo all the product booklets for our company as the hypertext did not work when downloaded to any smart phone. All that appeared were blank placeholders in each booklet index page.
    According to the PDF2ID people the program plug-in recovers all URLs static and dynamic and bookmarks and local links and suggested I check with Adobe ID5 for help, but Adobe says my $1,000 ID5 is no longer supported and that I should go to the forums.....so here I am.
    This is the first time I've even opened my ID5, so I'm a bit lost. Now I need to improve the quality of the PDFs, as we also need to convert all images to TIFF-CMYK in order to have the booklets printed & bound professionally. they tell me ID can do that.
    Any help is greatly appreciated.
    David

    Daveorne wrote:
    they tell me ID can do that.
    Ugh...in some companies, that is training.
    Don't take this the wrong way David, but of course ID can't do anything. PDF2ID conversions can be sketchy in the hands of the experienced. The same can be said of properly preparing matials for print. As Bob has already alluded, you're in an unfair position there. It's not uncommon for "management" types to just throw some sophisticated tools at a need and expect someone to make it work. In order to do what's being asked of you, you'll have to learn a fair bit about InDesign and production. It's too soon to ask about the output when you haven't learned to manage the input.

  • Hyperlinks do not work when exporting to PDF (Crystal and Visual Cut)

    I have a question about Crystal Reports XI Release 2 and Visual Cut 11. I create reports in Crystal and export them using Visual Cut. Some reports contain hyperlinks to files on a network drive. However, the links only work while in Crystal. The PDF files that are printed through Visual Cut display the links, but they are not clickable. How can this issue be fixed?
    In case it helps, the links also work when I export reports from Crystal to HTML, Word, and Excel, but not when I export to Acrobat. I believe it is a problem with tagging/accessibilityfeatures. So is there a setting/formula in Crystal or Visual Cut that would allow the exported PDF files to be accessible?

    While Crystal exports to pdf indeed lose hyperlink functionality (both in Crystal as well as in Visual CUT), Visual CUT allows you to use Crystal formulas (acting as hidden Tags) to create hyperlinks in the resulting pdf file. Another option supported by Visual CUT it to automatically detect file references in the pdf text and turn them into hyperlinks.  Contact MilletSoftware for more detail.
    Edited by: Ido Millet on Oct 27, 2010 5:11 PM

  • XML Data Button Not working when Exported onto BusinessObjectEnterprise

    I have an XML data button on a dashboard. It works fine in preview and on web. It does not work if it is exported onto Business Object server using XCelsius' Export to  BusinessObjectEnterprise.
    In the InfoView, I double click on the flash file, the flash files opens as expected, but when XML Data button is clicked, no new data seem to come in...
    If I export as Adobe file, and then post it onto the server, and view it using Info View, the XML data button works just fine.
    Please advise.

    Hi All,
    Even I have similar requirement.
    Any work around is appreciable.
    Thanks
    Vinod

  • GPU acceleration not working when exporting images on Lightroom CC

    I was monitoring CPU & GPU while exporting a timelapse sequence:
    As you can see, GPU is idle when exporting images - CPU does all the work. So GPU is used only when moving the sliders in the Develop module for a fast preview of an image you are working on, but for export it isn't used.
    What's your opinion? I'd like to have exports accelerated too. I was hoping for it. Exporting timelapses is really time consuming.
    Adobe pls?

    I couldn't find the Cuda-Supported-Cards.txt file at first, didn't know about right-click .app file "show package contents", but then found it.  I also searched for the hack and some people said delete the file, others said add your Graphics cards to the file, others said add your graphics card to the the Opencl_supported_cards.txt file.  I added my card to the Cuda-Supported-Cards.txt first, and it didn't work.  I left the graphics card in that file, but also added it to the  Opencl_supported_cards.txt file and now it works.  Thanks so much.

  • Image Settings not working when exporting in Lightroom v1.3.1

    When I try to export Images in Lightroom v1.3.1 to jpeg the image settings do not work. Example: Color space - SRGB, resize to fit checked, long edge set to 10in and resolution set to 250 gives me a image of 24in X 34in @ 72ppi. If I do nothing but save as a tiff I get 8in X 10in @ 250ppi. It works fine for everything except JPEG. Help please!

    If you care about the resolution tag, do not check "minimize metadata". Otherwise your 24x36@72 ppi is EXACTLY the same image as a 10" long dimension image @250 ppi, because they are both 2500 pixels in the long dimension. Lightroom scaled your image correctly in other words, it just neglected to write the silly resolution metadata tag to your file, which it only writes to jpegs when you do not check the minimize metadata checkbox. The only thing that matters is the number of pixels. P.S. if you really want a 4x5 ratio image, you'll first need to crop it in Develop. The 24x36 implies it is still at a 2x3 ratio.

  • Where used list doesn't work for global data

    Hi,
    When i try to do where used list on a constant in an include, it doesn't give the results for classes.
    The class contains the include in a method that uses the constant, and the where used list for that constant doesn't find the appearance of the constant in the class.
    I tried to look for oss note that solves the problem but i couldn't find any.

    I tried to update the navigation index but it still doesn't work. from my debuging i found out that it just doesn't look in classes, all classes. I mean even in the where used itself there is not an option for used in classes. I checked it and it's a generic problem of the where used list for global data.
    Edited by: Cohen Lior on Apr 14, 2010 6:52 PM

  • Stop(); not working when exporting AIR for iOS from Flash CS5.5

    Hey there I've tried to do a simple 5 frame animation in Flash CS5.5 each with a stop(); action but when viewed on the iPad the aniamtion doesnt stop, it cycle through the 5 frames instead of stopping at frame 1.
    Any reason why that is happening?

    Looks like it was a memory problem with the jvm.ini file.
    Pumped it up to 256 and it works now.
    Hope this helps anyone else in the future if they come across it.
    Thanks.

  • The slideshow's auto play feature is not working when exported to iPad.

    Is there anyway around this?

    What is your export route—SWF (Flash) or DPS.
    If SWF, it won't play because the iPad doesn't support Flash.
    If it's DPS, you need to ask in the DPS forum:
    Digital Publishing Suite

  • HT201303 How do I  verify my account to use apple tv not working when I put in my account details

    I need to verify my payment purchases information in order to use my apple tv.  please assist. Merry xmas
    j

    Exactly as the instructions say to.  Enter the information requested on ATV.  If you have passed that screen you can verify the info in iTunes.

  • Vertical Elasticity on Field is not working when the data contains - in it.

    Hi,
    I have a report which has to print a large invoice number(around 30 characters) per invoice line, but I got only space for 12-14 characters, so I have set the vertical elasticity property of the field to Expand which makes the data to wrap to the next line.
    But if the data contains any '-' character in it, the data wraps to the next line even though there is enough space on the current line.
    Sample outputs:
    When the vertical elasticity is set to Expand
    <p>
    Invoice Number Invoice Description
    123456789023 First Invoice on first line
    345678957694
    347634763476
    12345678-     Second Invoice but the number gets wrapped because of the hyphen
    345734573476
    569456573456
    When the vertical elasticity is set to Fixed
    Invoice Number Invoice Description
    123456789023 First Invoice on first line
    12345678-345     Second Invoice but the number does not get wrapped after hyphen
    </p>
    Is it a bug on reports editor, how do I avoid this?
    I would like to see the output like the following,
    Invoice Number Invoice Description
    123456789023 First Invoice on first line
    345678957694
    347634763476
    12345678-345     Second Invoice number with correct format.
    734573476569
    456573456
    PS: The version of the Report Builder is 10.1.2.0.2
    Thanks in Advance,
    Senthil

    It looks as if the logic that Oracle Reports uses to determine where to break the line is interpreting the "-" character differently from other characters. This is probably because it is used (at least in English) to break words at the end of a line (see http://en.wikipedia.org/wiki/Hyphen#Justification_and_line-wrapping).
    One workaround might be to replace "-" character with another character (or more) that looks the same (or similar), but that Oracle Reports does not interpret differently from other characters. For me (on Windows), CHR(173) seems to work. However, whether or not it works for you will depend on whatever character set(s) you're using. The same goes for the Unicode characters like U+2010 (hyphen), U+2011 (non-breaking hyphen), and U+2212 (minus).
    For example, in your data model, you might try replacing your current invoice number column with an expression that looks something like this:
    REPLACE(YOUR_INVOICE_NUMBER_COLUMN, '-', CHR(173))
    Hope this helps.

  • Crystal Report (visual studio 2005)-Hyperlink not working on exported PDF

    I have created a crystal report by using VS 2005, there are some hyperlinks inside the report.
    After i exported the report to PDF, I check the PDF file, none of the link contains inside the PDF file.
    It seems a bug, i google this issue, some people can export to RTF first and then in RTF save as PDF, then the link should be there. I tried it, it works, but it totally mess up my report layout.
    Please advise,
    Tommy

    Typing the terms "pdf export hyperlink crystal" in the search box at the top right corner of this page comes up with the following KB (5th hit):
    [Hyperlinks to files do not work when exported to Portable Document Format (PDF)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333633363337%7D.do].
    "Messed" up report export to RTF does not tell me much either. A link to a screenshot will be great.
    Also, what CR Service Pack are you on?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Links not working when I export to HTML or PDF

    I am a longtime Mac fanatic, but new to using Keynote. I am creating lectures for a class I teach where the computer in the classroom is Windows, so I have to export my Keynotes to another format.
    First I tried exporting to Powerpoint. That was a disaster. Since, I've tried exporting to HTML, exporting to PDF, and print -> Save as PDF (to get a PDF that prints nicely).
    My problem? Hyperlinks within my Keynote work fine when I play the presentation in Keynote. They also work when I export to PDF. However, they do not work when I generate the printable PDF OR when I export to HTML.
    I guess I understand them not working in the printable PDF, but not the HTML. Am I doing something wrong?
    Ideally I would like to export one PDF that I could use up on the projecter (with links working) and that students could view and/or print from their computers.
    Should I really have to have 2 PDF's - one for students who want to view it on screen with working links and one for people that want to print it out?!?!
    TIA for any help/advice!

    Do you have any filters applied to your clips?
    This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
    I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
    Anywho, export again, this time with "self contained" movie selected.
    Then try to import to Compressor.

Maybe you are looking for