Filter / variable issue
Hey guys,
I'm setting up a report in which I'm using a filter on user role. Two roles are selected hard-coded.
Besides this I'm using user name with a variable.
Now I would like to see only those names linked to the two roles. Currently all names belonging to all roles are shown, since data is only filtered after selecting the names.
Any ideas on how to set this up?!
Thanks!
Regards,
Joost
Hello Jost,
I understand that you are trying to check result ( roles) assigned to variable (username). Kindly check if you can achive it using authorizations for roles.
Regards,
Asit Ramteke
Similar Messages
-
Hi,
Problem Description:
After installing my new product version, when user does log-off and log in again into admin account
or switch from admin account to non-admin account, PATH environment variable shows incorrect path of my product (previous product version’s path) using command prompt.
It seems windows refresh issue during session changes (log off and log in / switch from Admin to
Non-admin account).
Why PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
Please see my thread for more details http://social.msdn.microsoft.com/Forums/vstudio/en-US/445ab42c-bdff-405a-8d53-558e1b6c7d34/path-environment-variable-issue-when-user-logoff-and-login-or-switch-from-admin-to-nonadmin?forum=windowsgeneraldevelopmentissues
Also submitted bug for this in connect.microsoft.com portal.In that it has lots of information
like problem statement, Reproduction steps and Expected Results.
Bug ID: 871782
Could you please any body help me for this?. your support will be appreciated.
Thanks,
MarichamyWhy PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
I wouldn't have any expectation of what you are doing to work the way you expect. E.g. why is the %ABC% being replaced at all? There is some help about this ambiguous scenario in the cmd help...
/V:ON Enable delayed environment variable expansion using ! as the
delimiter. For example, /V:ON would allow !var! to expand the
variable var at execution time. The var syntax expands variables
at input time, which is quite a different thing when inside of a FOR
loop.
/V:OFF Disable delayed environment expansion.
So, what's the setting for the /V: switch that your users would be using? Perhaps you should be using the ! instead of the % for your ABC variable?
Oh. There's more below where I found that...
Delayed environment variable expansion is NOT enabled by default. You
can enable or disable delayed environment variable expansion for a
particular invocation of CMD.EXE with the /V:ON or /V:OFF switch. You
can enable or disable delayed expansion for all invocations of CMD.EXE on a
machine and/or user logon session by setting either or both of the
following REG_DWORD values in the registry using REGEDIT.EXE:
HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\DelayedExpansion
and/or
HKEY_CURRENT_USER\Software\Microsoft\Command Processor\DelayedExpansion
to either 0x1 or 0x0. The user specific setting takes precedence over
the machine setting. The command line switches take precedence over the
registry settings.
In a batch file the SETLOCAL ENABLEDELAYEDEXPANSION or DISABLEDELAYEDEXPANSION
arguments takes precedence over the /V:ON or /V:OFF switch. See SETLOCAL /?
for details.
If delayed environment variable expansion is enabled, then the exclamation
character can be used to substitute the value of an environment variable
at execution time.
So, I guess the essence of your "bug" will boil down to whether you
need the feature to get the result you want and the
truth of that first sentence but it certainly looks like a "can of worms" to me. ; )
HTH
Robert Aldwinckle -
Filter (variable) applied at analytical view is not reflected in Caculation view.
Hello All,
I am new to hana and would like to discuss one issue here.
Model is something like this:
Calculation view ---- > has one Analytical View ---> has one attribute view and a fact table.
Now, in analytical view I have applied a filter using a variable on dimension attribute ( column of attribute view). When I do data preview on analytical view I get a prompt (asking single value to put in - mandatory). However when I do a data preview for calculation view (which involves analytical view created earlier) ...I don't get a prompt this time.
Calculation view is a 2 level only [ semantic --> projection/aggregation(analytical view) ].
Please assist with it.
Thanks
SumitThanks for your reply Ravi.
It seems like this approach is applicable for "Input Parameters" only and not for "Variable" ?
I created a variable & an Input parameter in Analytical view, and created same variable & input parameter in calculation view...and then clicked on "Input parameter managed mapping" button under section "Variables/Input parameters" of semantics. I could see only Input parameters listed on both sides not the variables.
1. I am curious now to understand ...when it is recommended that the data needs to be filtered out at the lowest level...however we still need to define parameters at calculation level ?
2. The prompt based filters applied at analytical view is getting reflected in calculation view when it(calculation view) is refreshed for data preview ?
3. Is it possible to expose analytical or attribute view directly into the business objects universe ?
Yours, and other member's reply on it will be appreciated.
Thanks
Sumit -
BICS - Passing Mandatory Filter Variable value to a BEx Query
Hi All,
I have similar problem as the below URL.
BICS - Passing variables to a BEx Query
Details:
I have a mandatory filter - Display Currency in BEx query. I'm trying to input this mandatory filter from Xcelsius, (by mapping the filter value to a cell in Xcelsius spreadsheet).
However, when I lauch the dashvoard in IE page, it still throws an error:
" One or more mandatory varaibles of the query... are not filled"
Does anyone face this issue?
Regards,
AKHi Sriram,
I assume you are using SAP direct connectivity.
>> Yes, it is direct connectivity to SAP-BW.
(And I'm publishing this dashboard in SAP-BW system itself.)
1. What are all the Variables you get in intial variable screen?
because if you have a Mandatory variable in your Bex query, a intial variable screen will appear with all the variables.
>> I'm testing the underlying BEx query, it has one mandatory variable for "Display Currency". Other are optional variable-filters, so other filters are not a problem.
2. when you get this error "One or more mandatory varaibles of the query... are not filled", just after the Launch or after the variable screen?
>> I use the option in Xcelsius: SAP --> Launch --> a new IE page opens, then I get this error
3. However you can bye pass this screen only when you give default values to your mandatory variables.
>> When I use personalization in BEx side, to input default value (e.g: USD), and then run this standard content dashboard, the hangs.(Do not see anything on IE page for long time. Though the data is very less-Few hundres rows)
So, I'm looking at passing the value from Xcelsius-spreadsheet, however, the dashboard is not picking up the value from the mapped-cell.
Hope this gives more clarity on the problem.
Cheers,
AK
Edited by: Anil Kumar2981 on Jun 16, 2011 12:12 AM -
I've been following (roughly) the simple virus scanner interface that SUN provides, and adapted it into a slightly heavier weight filter that interfaces with libclamav. At first both were compiled using GCC, and I thought due to some of the weird problems I had when debugging flags were inserted, maybe Sun Studio would give better results. It hasn't, and I'm at a bit of a loss as to what to do next.
The symptom is that parts of the message just dissapear, and I see the old mime boundaries within the message body, so it seems like there's some pointer indicating where the message starts that's being corrupted by something in my code.
Interestingly, if I stop processing the message while still inside the headers, there is no problem, but that's not a very effective virus scanner if it can only look at the content type and filename of the part now is it?
This happens regardless of whether I use GCC or CC, and I'm using 0.88.1 of clamav. The output message is shown last. It should be fairly obvious what's wrong with it.
Here's my code, perhaps someone can tell me what I'm doing wrong.
** WARNING ** This IS NOT polished code, so please don't expect it to be perfect. It's clean, but includes absolute pathnames, and some other nauties that should be removed before anyone even thinks of reusing this. Once it actually works, I'll do the nessisary code cleanup, and release this to the community to do whatever anyone wants with.
Makefile
SERVER_ROOT=/opt/SUNWmsgsr
INSTALL_LOCATION=/var/opt/SUNWmsgsr/site-programs/
INCLUDE=-I${SERVER_ROOT}/include
LIBPATH=-L${SERVER_ROOT}/lib
CLAMLIBS=`/usr/local/bin/clamav-config --libs` -lclamav
CLAMFLAGS=`/usr/local/bin/clamav-config --cflags`
LIBS=-lmtasdk ${CLAMLIBS}
FLAGS=${CLAMFLAGS}
all:
cc ${FLAGS} -o msgsr_clamav msgsr_clamav.c \
${INCLUDE} ${LIBPATH} ${LIBS}
install:
cp msgsr_clamav ${INSTALL_LOCATION}
cp msgsr_clamav.cnf ${INSTALL_LOCATION}************************************************
Expansions
CLAMLIBS=-L/usr/local/lib -lz -lbz2 -lpthread -lclamav
CLAMFLAGS=-I/usr/local/include -xO4************************************************
msgsr_clamav.c
* msgsr_clamav
* Interface the Sun Java System Message Server with LibClamAV
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#include <pthread.h>
#include "clamav.h" // LibClamAV Header
#include "mtasdk.h"
* A structure to store channel options
typedef struct {
/* Produce debug output? */
int debug;
// Maximum size (in bytes) attachment to scan
int scan_maxsize;
// Scan recursion level
int scan_recursion_level;
// Max files
int scan_maxfiles;
// Path to ClamAV Virus Database
char db_dir[BIGALFA_SIZE+3];
// Used Internally by ClamAV. Stored here for ease of access
struct cl_node *root;
unsigned int signo;
struct cl_stat dbstat;
pthread_mutex_t reload_mutex;
// MIME types to ignore
char ignore_mime_types[BIGALFA_SIZE+3];
// Types of files to ignore
char ignore_file_types[BIGALFA_SIZE+3];
/* Unwanted MIME content types (ALWAYS stripped, never scanned) */
char bad_mime_types[BIGALFA_SIZE+3];
/* Unwanted file types (ALWAYS stripped, never scanned)*/
char bad_file_types[BIGALFA_SIZE+3];
/* Length of bmt string */
size_t bmt_len;
/* Length of bft string */
size_t bft_len;
} our_options_t;
// A structure passed per message to contain message specific data, including open files, etc.
typedef struct {
// The filename of the temp file in use so it can be unlinked when we're done with it.
char temp_file_name[BIGALFA_SIZE * 2 + 10];
// The file * to the temp file in use, so we don't have to reopen it across calls to decode_inspect
FILE *temp_file;
// A pointer to the single instance of our_options_t that is shared across all threads
our_options_t * options;
} msg_temp_data_t;
* Forward declarations
static void error_exit(int ires, const char *msg);
static void error_report(our_options_t *options, int ires, const char *func);
static void error_reports(our_options_t *options, const char* errStr, const char *func);
static int is_bad_mime_type(our_options_t *options, mta_decode_t *dctx, char *buf, size_t maxbuflen);
static int is_bad_file_type(our_options_t *options, mta_opt_t *params, const char *param_name, char *buf, size_t maxbuflen);
static int load_options(our_options_t *options);
static mta_dq_process_message_t process_message;
static mta_decode_read_t decode_read;
static mta_decode_inspect_t decode_inspect;
* main() -- Initialize the MTA SDK, load our options, and then
* start the message processing loop.
int main()
int ires,ret;
char error_msg[BIGALFA_SIZE+3];
our_options_t options;
* Initialize the MTA SDK
* See explanatory comment 1
if ((ires = mtaInit(0)))
error_exit(ires, "Unable to initialize the MTA SDK");
* Load our channel options
* See explanatory comment 2
if ((ires = load_options(&options)))
error_exit(ires, "Unable to load our channel options");
* Initialize the ClamAV Virus Engine and Database
// Preconditions to initializing the ClamAV database
options.root=NULL; options.signo=0;
// Load the virus database
mtaLog("cl_loaddbdir() loading database from %s",options.db_dir);
if ((ret = cl_loaddbdir(options.db_dir, &options.root, &options.signo)))
sprintf(error_msg,"cl_loaddbdir() error: %s", cl_strerror(ret));
error_exit(MTA_NO,error_msg);
mtaLog("cl_loaddbdir() loaded %d virus definitions",options.signo);
// Internalize the virus database structure
mtaLog("cl_build() initializing database");
if((ret = cl_build(options.root)))
sprintf(error_msg,"cl_build() error: %s", cl_strerror(ret));
error_exit(MTA_NO,error_msg);
// Keep track of database updates
memset(&options.dbstat, 0, sizeof(struct cl_stat));
cl_statinidir(options.db_dir, &options.dbstat);
// Initialize our reload mutex
if (ret = pthread_mutex_init(&options.reload_mutex,NULL))
sprintf(error_msg,"pthread_mutex_init() error: %d", ret);
error_exit(MTA_NO,error_msg);
* Now process the queued messages. Be sure to indicate a
* thread stack size sufficient to accomodate message
* enqueue processing.
* See explanatory comment 3
if ((ires = mtaDequeueStart((void *)&options,
process_message, NULL, 0)))
error_exit(ires, "Error during dequeue processing");
* All done
cl_free(options.root);
mtaDone();
return(0);
*Reloads the virus database and re-initializes the in memory structure
* Loads a new virus database, then if all succeeds, it
* swaps the new database with the old one. It's assumed
* clamav releases the database gracefully, but another mutex
* may be required if this is not the case.
static int reload_database(our_options_t *options)
struct cl_node *newroot = NULL,*oldroot;
char error_msg[BIGALFA_SIZE+3];
int ret;
unsigned int signo=0;
if (pthread_mutex_trylock(&options->reload_mutex)) { // Only one reload at a time thank you.
if(cl_statchkdir(&options->dbstat) == 1) { // Make sure we actually need an update
mtaLog("reload_database() Virus database is stale... reloading");
mtaLog("cl_loaddbdir() reloading database from %s",options->db_dir);
// Load the new virus database
if ((ret = cl_loaddbdir(options->db_dir, &newroot, &signo)))
mtaLog("cl_loaddbdir() error: %s", cl_strerror(ret));
return (-1);
mtaLog("cl_loaddbdir() loaded %d virus definitions",options->signo);
// Internalize the virus database structure
mtaLog("cl_build() re-initializing database");
if((ret = cl_build(newroot)))
mtaLog("cl_build() error: %s", cl_strerror(ret));
mtaLog("reload_database() Database reload aborted");
cl_free(newroot);
return (-2);
// Save a pointer to the old root
oldroot = options->root;
// Swap in the new root and signo
options->root = newroot;
options->signo = signo;
// Release the old root
cl_free(oldroot);
mtaLog("database_reload() Successfully loaded new virus database");
// Keep track of database updates
cl_statfree(&options->dbstat);
cl_statinidir(options->db_dir, &options->dbstat);
pthread_mutex_unlock(&options->reload_mutex);
* process_message() -- This routine is called by
* mtaDequeueStart() to process each queued
* message. We don稚 make use of ctx2, but
* ctx1 is a pointer to our channel options.
* See explanatory comment 4
static int process_message(void **ctx2, void *ctx1, mta_dq_t *dq, const char *env_from, size_t env_from_len)
const char *adr;
int disp, ires;
size_t len;
mta_nq_t *nq;
msg_temp_data_t msg_data;
* Initializations
nq = NULL;
msg_data.options = (our_options_t *)ctx1;
msg_data.temp_file = NULL;
* Check the virus database to make sure it isn't stale
* If it it's not currently reloading, and is stale, reload it.
//if(cl_statchkdir(&(msg_data.options->dbstat)) == 1)
// reload_database(msg_data.options);
* A little macro to do error checking on mta*() calls
#define CHECK(f,x) \
if ((ires = x)) { error_report(msg_data.options, ires, f); goto \
done_bad; }
* Start a message enqueue. Use the dequeue context to copy
* envelope flags fromt the current message to this new
* message being enqueued.
* See explanatory comment 5
CHECK("mtaEnqueueStart", mtaEnqueueStart(&nq, env_from, env_from_len, MTA_DQ_CONTEXT, dq, 0));
* Process the envelope recipient list
* See explanatory comment 6
while (!(ires = mtaDequeueRecipientNext(dq, &adr, &len, 0)))
* Add this envelope recipient address to the message
* being enqueued. Use the dequeue context to copy
* envelope flags for this recipient from the current
* message to the new message.
ires = mtaEnqueueTo(nq, adr, len, MTA_DQ_CONTEXT,
dq, MTA_ENV_TO, 0);
/* See explanatory comment 7 */
disp = (ires) ? MTA_DISP_DEFERRED : MTA_DISP_RELAYED;
CHECK("mtaDequeueRecipientDisposition", mtaDequeueRecipientDisposition(dq, adr, len,disp, 0));
* A normal exit from the loop occurs when
* mtaDequeueRecipientNext() returns an MTA_EOF status.
* Any other status signifies an error.
if (ires != MTA_EOF)
error_report(msg_data.options, ires, "mtaDequeueRecipientNext");
goto done_bad;
* Begin the MIME decode of the message
* See explanatory comment 8
CHECK("mtaDecodeMessage",
mtaDecodeMessage(
/* Private context is our message data structure */
(void *)&msg_data,
/* Input is the message being dequeued */
MTA_DECODE_DQ, (void *)dq,
/* Output is the message being enqueued */
MTA_DECODE_NQ, (void *)nq,
/* Inspection routine */
decode_inspect,
/* Convert non-MIME formats to MIME */
MTA_DECODE_THURMAN,
0));
* Finish the enqueue
* NOTE: IT担 IMPORTANT TO DO THIS before DOING THE
* DEQUEUE. YOU WILL LOSE MAIL IF YOU DO THE DEQUEUE FIRST
* and then THE ENQUEUE FAILS.
* See explanatory text 9
CHECK("mtaEnqueueFinish", mtaEnqueueFinish(nq, 0));
nq = NULL;
* Finish the dequeue
CHECK("mtaDequeueFinish", mtaDequeueMessageFinish(dq, 0));
* All done with this message
return(MTA_OK);
done_bad:
* Abort any ongoing enqueue or dequeue
if (nq)
mtaEnqueueFinish(nq, MTA_ABORT, 0);
if (dq)
mtaDequeueMessageFinish(dq, MTA_ABORT, 0);
* And return our error status
return(ires);
#undef CHECK
* decode_inspect() -- This is the routine that inspects each
* message part, deciding whether to accept
* or reject it.
* See explanatory comment 10
static int decode_inspect(void *ctx, mta_decode_t *dctx, int data_type,const char *data, size_t data_len)
char buf[BIGALFA_SIZE * 2 + 10];
const char *virname;
int i;
static unsigned int part_c = 1;
msg_temp_data_t *msg_data = (msg_temp_data_t *)ctx;
strncpy(buf,data,data_len);
buf[data_len] = 0;
mtaLog("decode_inspect() (%d,%ud): %s",data_type,dctx,buf);
switch (data_type)
case MTA_DATA_HEADER:
* See if the part has:
* 1. A bad MIME content-type,
* 2. A bad file name extension in the (deprecated)
* NAME= content-type parameter, or
* 3. A bad file name extension in the
* FILENAME= content-disposition parameter.
i = 0;
if ((i = is_bad_mime_type((void *)msg_data->options, dctx, buf, sizeof(buf))) ||
is_bad_file_type((void *)msg_data->options,mtaDecodeMessageInfoParams(dctx,MTA_DECODE_CTYPE_PARAMS, NULL),"NAME", buf, sizeof(buf)) ||
is_bad_file_type((void *)msg_data->options,mtaDecodeMessageInfoParams(dctx,MTA_DECODE_CDISP_PARAMS, NULL),"FILENAME", buf, sizeof(buf)))
char msg[BIGALFA_SIZE*4 + 10];
* Replace this part with a text message indicating
* that the part痴 content has been deleted.
* See explanatory comment 11
if (i)
i = sprintf(msg,
"The content of this message part has been removed.\n"
"It contained a potentially harmful media type of %.*s",
strlen(buf)-2, buf+1);
else
i = sprintf(msg,
"The content of this message part has been removed.\n"
"It contained a potentially harmful file named '%s'", buf);
mtaLog("decode_inspect(): %s",msg);
return(mtaDecodeMessagePartDelete(dctx,
MTA_REASON, msg, i,
MTA_DECODE_CTYPE, "text", 4,
MTA_DECODE_CSUBTYPE, "plain", 5,
MTA_DECODE_CCHARSET, "us-ascii", 8,
MTA_DECODE_CDISP, "inline", 6,
MTA_DECODE_CLANG, "en", 2, 0));
} break; // case MTA_DATA_HEADER:
case MTA_DATA_TEXT:
case MTA_DATA_BINARY:
if (msg_data->temp_file == NULL)
sprintf(msg_data->temp_file_name,"/tmp/%i.tmp",part_c++);
mtaLog("messageDecode(): Opening Temp File %s",msg_data->temp_file_name);
msg_data->temp_file = fopen(msg_data->temp_file_name,"wb");
fwrite(data,data_len,1,msg_data->temp_file);
return(MTA_OK);
break;
case MTA_DATA_NONE:
fflush(msg_data->temp_file);
fclose(msg_data->temp_file);
msg_data->temp_file = NULL;
struct cl_limits limits;
memset(&limits, 0, sizeof(struct cl_limits));
/* maximal number of files in archive */;
limits.maxfiles = 1000;
/* maximal archived file size */
limits.maxfilesize = 10 * 1048576; /* 10 MB */
/* maximal recursion level */
limits.maxreclevel = 5;
/* maximal compression ratio */
limits.maxratio = 200;
/* disable memory limit for bzip2 scanner */
limits.archivememlim = 0;
i = cl_scanfile(msg_data->temp_file_name, &virname, NULL, msg_data->options->root,&limits,CL_SCAN_STDOPT);
unlink (msg_data->temp_file_name);
if(i == CL_VIRUS) {
char msg[BIGALFA_SIZE*4 + 10];
size_t idlen;
i = sprintf(msg,
"The content of this message part has been removed.\n"
"It contained the virus %s in a file named '%s'", virname,buf);
mtaDequeueInfo(dctx,MTA_ENV_ID,&buf,&idlen);
buf[idlen] = '\0';
mtaLog("decode_inspect(): Detected %s virus in part %i of msg ID %s",virname,0,buf);
return(mtaDecodeMessagePartDelete(dctx,
MTA_REASON, msg, i,
MTA_DECODE_CTYPE, "text", 4,
MTA_DECODE_CSUBTYPE, "plain", 5,
MTA_DECODE_CCHARSET, "us-ascii", 8,
MTA_DECODE_CDISP, "inline", 6,
MTA_DECODE_CLANG, "en", 2, 0));
} else {
if(i != CL_CLEAN)
mtaLog("decode_inspect() Error: %s scanning file %s",cl_strerror(i),msg_data->temp_file_name);
else
mtaLog("decode_inspect(): Part in file %s is clean",msg_data->temp_file_name);
//return(mtaDecodeMessagePartCopy(dctx, 0));
return(MTA_OK); break;
return(MTA_OK);
* is_bad_mime_type() -- See if the part痴 media type is in our
* bad MIME content types, for example:
* application/vbscript
* See explanatory comment 13
static int is_bad_mime_type(our_options_t *options,
mta_decode_t *dctx, char *buf,
size_t maxbuflen)
const char *csubtype, *ctype;
size_t i, len1, len2;
char *ptr;
* Sanity checks
if (!options || !options->bmt_len ||
!options->bad_mime_types[0] ||
!dctx)
return(0);
* Get the MIME content type
ctype = mtaDecodeMessageInfoString(dctx, MTA_DECODE_CTYPE,NULL, &len1);
csubtype = mtaDecodeMessageInfoString(dctx,MTA_DECODE_CSUBTYPE,NULL, &len2);
* Build the string: <0x01>type/subtype<0x01><0x00>
ptr = buf;
*ptr++ = (char)0x01;
for (i = 0; i < len1; i++)
*ptr++ = tolower(*ctype++);
*ptr++ = '/';
for (i = 0; i < len2; i++)
*ptr++ = tolower(*csubtype++);
*ptr++ = (char)0x01;
*ptr = '\0';
* Now see if the literal just built occurs in the list of
* bad MIME content types
return((strstr(options->bad_mime_types, buf)) ? -1 : 0);
* is_bad_file_type() -- See if the part has an associated file
* name whose file extension is in our list
* of bad file names, such as .vbs.
* See explanatory comment 14
static int is_bad_file_type(our_options_t *options,
mta_opt_t *params,
const char *param_name, char *buf,
size_t maxbuflen)
const char *ptr1;
char fext[BIGALFA_SIZE+2], *ptr2;
size_t i, len;
* Sanity checks
if (!options || !options->bft_len || !params || !param_name)
return(0);
len = 0;
buf[0] = '\0';
if (mtaOptionString(params, param_name, 0, buf, &len,
maxbuflen - 1) ||
!len || !buf[0])
* No file name parameter specified
return(0);
* A file name parameter was specified. Parse it to
* extract the file extension portion, if any.
ptr1 = strrchr(buf, '.');
if (!ptr1)
* No file extension specified
return(0);
* Now store the string created earlier in fext[]
* Note that we drop the ・・from the extension.
ptr1++; /* Skip over the ・・*/
ptr2 = fext;
*ptr2++ = (char)0x01;
len = len - (ptr1 - buf);
for (i = 0; i < len; i++)
*ptr2++ = tolower(*ptr1++);
*ptr2++ = (char)0x01;
*ptr2++ = '\0';
* Now return -1 if the string occurs in
* options->bad_file_types.
return((strstr(options->bad_file_types, fext)) ? -1 : 0);
* load_options() -- Load our channel options from the channel痴
* option file
* See explanatory comment 15
static int load_options(our_options_t *options)
char buf[BIGALFA_SIZE+1];
size_t buflen, i;
mta_opt_t *channel_opts;
int ires;
const char *ptr0;
char *ptr1;
* Initialize the our private channel option structure
memset(options, 0, sizeof(our_options_t));
* Set internal defaults for important features
options->scan_maxsize = 10 * 1024 * 1024; // 10 MB
options->scan_recursion_level = 10;
options->scan_maxfiles = 200;
strcpy(options->db_dir,cl_retdbdir()); // Default ClamAV Directory
* Access the channel痴 option file
* See explanatory comment 16
channel_opts = NULL;
if ((ires = mtaOptionStart(&channel_opts, "/var/opt/SUNWmsgsr/site-programs/msgsr_clamav.cnf", 0, 0)))
mtaLog("Unable to access our channel option file");
return(ires);
* DEBUG=0|1
options->debug = 0;
mtaOptionInt(channel_opts, "DEBUG", 0, &options->debug);
if (options->debug)
mtaDebug(MTA_DEBUG_SDK, 0);
* BAD_MIME_TYPES=type1/subtype1[,type2/subtype2[,...]]
buf[0] = '\0';
mtaOptionString(channel_opts, "BAD_MIME_TYPES", 0, buf,
&buflen, sizeof(buf));
* Now translate the comma separated list:
* Type1/Subtype1[,Type2/Subtype2[,...]]
* to
*<0x01>type1/subtype1[<0x01>type2/subtype2[<0x01>...]]<0x01>
ptr0 = buf;
ptr1 = options->bad_mime_types;
*ptr1++ = (char)0x01;
for (i = 0; i < buflen; i++)
if (*ptr0 != ',')
*ptr1++ = tolower(*ptr0++);
else
*ptr1++ = (char)0x01;
ptr0++;
*ptr1++ = (char)0x01;
*ptr1 = '\0';
options->bmt_len = ptr1 - options->bad_mime_types;
* BAD_FILE_TYPES=["."]Ext1[,["."]Ext2[,...]]
buf[0] = '\0';
buflen = 0;
mtaOptionString(channel_opts, "BAD_FILE_TYPES", 0, buf,
&buflen, sizeof(buf));
* Now translate the comma separated list:
* ["."]Ext1[,["."]Ext2[,...]]
* to
* <0x01>ext1[<0x01>ext2[<0x01>...]]<0x01>
ptr0 = buf;
ptr1 = options->bad_file_types;
*ptr1++ = (char)0x01;
for (i = 0; i < buflen; i++)
switch(*ptr0)
default : /* copy after translating to lower case */
*ptr1++ = tolower(*ptr0++);
break;
case '.' : /* discard */
break;
case ',' : /* end current type */
*ptr1++ = (char)0x01;
ptr0++;
break;
*ptr1++ = (char)0x01;
*ptr1 = '\0';
options->bft_len = ptr1 - options->bad_file_types;
* Dispose of the mta_opt_t context
* See explanatory comment 17
mtaOptionFinish(channel_opts);
* And return a success
return(MTA_OK);
* error_report() ・Report an error condition when debugging is
* enabled.
static void error_report(our_options_t *options, int ires,
const char *func)
if (options->debug)
mtaLog("%s() returned %d; %s",
(func ? func : "?"), ires, mtaStrError(ires,0));
static void error_reports(our_options_t *options, const char* errStr,
const char *func)
if (options->debug)
mtaLog("%s() reported: %s",
(func ? func : "?"), errStr);
* error_exit() -- Exit with an error status and error message.
static void error_exit(int ires, const char *msg)
mtaLog("%s%s%s", (msg ? msg : ""), (msg ? "; " : ""),
mtaStrError(ires,0));
exit(1);
msgsr_clamav.cnf
DEBUG=1
BAD_MIME_TYPES=application/vbscript
BAD_FILE_TYPES=bat,pif,vb,vbs,chs,exe************************************************
broken message
Return-path: <[email protected]>
Received: from virusscan-daemon.apple.california.com by apple.california.com
(Sun Java System Messaging Server 6.2-3.04 (built Jul 15 2005))
id <[email protected]> for [email protected]; Thu,
20 Apr 2006 07:30:13 -0700 (PDT)
Received: from california.com ([209.159.129.16])
by apple.california.com (Sun Java System Messaging Server 6.2-3.04 (built Jul
15 2005)) with ESMTP id <[email protected]> for
[email protected]; Thu, 20 Apr 2006 07:30:05 -0700 (PDT)
Received: from [61.23.221.222] by apple.california.com (mshttpd); Thu,
20 Apr 2006 14:30:05 +0000 (GMT)
Content-return: allowed
Date: Thu, 20 Apr 2006 14:30:05 +0000 (GMT)
From: [email protected]
Subject: Re: testing
In-reply-to: <[email protected]>
To: [email protected]
Message-id: <[email protected]>
MIME-version: 1.0
X-Mailer: Sun Java(tm) System Messenger Express 6.2-3.04 (built Jul 15 2005)
Content-type: multipart/alternative;
boundary="Boundary_(ID_iOVR4MBjhWJn/mh7Ij+BUQ)"
Content-language: en
X-Accept-Language: en
Priority: normal
References: <[email protected]>
Original-recipient: rfc822;[email protected]
This is a multi-part message in MIME format.
--Boundary_(ID_iOVR4MBjhWJn/mh7Ij+BUQ)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7bit
Content-disposition: inline
Data is missing from here
----ec04832708e231d6e2f
--Boundary_(ID_iOVR4MBjhWJn/mh7Ij+BUQ)
Content-type: text/html; charset=us-ascii
Content-transfer-encoding: quoted-printable
Content-disposition: inline
Data is missing from here
nal Message -----=3Cbr=3EFrom=3A chales=40california=2Ecom=3Cbr=3EDate=3A=
Thursday=2C April 20=2C 2006 11=3A19 pm=3Cbr=3ESubject=3A testing=3Cbr=3E=
To=3A chales=40california=2Ecom=3Cbr=3E=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B=
3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B 5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B=
7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B 9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B=
1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B 3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B=
5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B 7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B=
9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B 1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B=
3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B 5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B=
7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B 9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B=
1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B 3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B=
5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B 7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B=
9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B 1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B=
3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B 5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B=
7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B 9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B=
1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B 3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B=
5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B 7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B=
9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B 1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B=
3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B 5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B=
7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B 9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B=
1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B 3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B=
5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B 7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B=
9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B 1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B=
3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B 5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B=
7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B 9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B=
1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B 3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B=
5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B 7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B=
9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B 1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B=
3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B 5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B=
7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B 9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B=
1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B 3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B=
5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B 7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B=
9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B 1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B=
3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B 5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B=
7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B 9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B=
1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B 3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B=
5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B 7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B=
9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B 1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B=
3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B 5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B=
7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B 9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B=
1=3Cbr=3E=26gt=3B 2=3Cbr=3E=26gt=3B 3=3Cbr=3E=26gt=3B 4=3Cbr=3E=26gt=3B=
5=3Cbr=3E=26gt=3B 6=3Cbr=3E=26gt=3B 7=3Cbr=3E=26gt=3B 8=3Cbr=3E=26gt=3B=
9=3Cbr=3E=26gt=3B 0=3Cbr=3E=26gt=3B =3Cbr=3E=26gt=3B
----ec04832708e231d6e2f
--Boundary_(ID_iOVR4MBjhWJn/mh7Ij+BUQ)
Content-type: text/x-vcard; name=chales.vcf; charset=us-ascii
Content-transfer-encoding: base64
Content-disposition: attachment; filename=chales.vcf
Content-description: Card for <[email protected]>
bA0KdGVsO3dvcms6NTEwLTI4Ny04NDUwDQp1cmw6aHR0cDovL3d3dy5jYWxpZm9ybmlh
LmNvbS8NCm9yZzpDYWxpZm9ybmlhQ29tLCBJbmM7DQp2ZXJzaW9uOjIuMQ0KZW1haWw7
aW50ZXJuZXQ6Y2hhbGVzQGNhbGlmb3JuaWEuY29tDQp0aXRsZTpTeXN0ZW0gQWRtaW5p
c3RyYXRvcg0KZW5kOnZjYXJkDQo=
----ec04832708e231d6e2f--
Boundary_(ID_iOVR4MBjhWJn/mh7Ij+BUQ)Ok, so it's not my code. Using the virus_scanner_simple.c example from SUN, if you change the decode_inspect routine to return MTA_OK for every call (which should technically just let the message pass) it has the same behavior as my program. (Not all that suprising since mine is a derivative of said program)
That said, this now looks like a library issue. I'm using Sun Java System Messaging Server 6.2-3.04 (built Jul 15 2005) according to the SMTP prompt, and was wondering if perhaps I should apply:
http://sunsolve.sun.com/search/document.do?assetkey=1-21-118207-42-1&searchclause=6306404
The issue seems to be in the mtaDecodeMessage function, and occurs when the decode_inspect function is allowed to parse the message body, not just the message headers.
The machine is a Sun Ultra 4500 running Solaris 10. Here's the banner:
SunOS cookie 5.10 Generic_118822-23 sun4u sparc SUNW,Ultra-Enterprise
Has anyone else had similar problems using the MTA SDK? Is there anything I'm missing here (besides the above mentioned patch) that might fix this? -
Front Panel Mass Binding Project Variables Issue
Hello -
When attempting to bind controls to shared variables through the front panel mass binding option, there is an issue where you can not seem to bind a "project item" to the control. The method of binding I am using is to export a text list of control names, urls, mode, and function to a text editor utilizing the front panel binding mass configuration options. The text editor shows, in the fourth column, a "0" for no function, a "1" for network item, and a "2" for project item. when attempting to import the list back into the front panel binding mass configuration, all "2" indications become "1", as all items are treated as network. Thus one can not effectively bind to a project shared variable item.
The binding works fine manually by means of utilizing the properties selection of the control, but it is difficult to do this for 821 controls, as in my application.
My application is based on a OPC served group of 821 variables which are linked to controls and indicators through the shared variable representation for each item created in the multiple variable editor.
Does anyone have a work around for this issue, as it is a showstopper right now, ie, you can not effectively bind a large quantity of controls or indicators to project located shared variables as required.
The rationale behind utilizing project located variables instead of network located variables is to reduce the amount of calls to the OPC server which was causnig a large latency in the refresh of the 821 items. With the items defined as shared variables within the project, a single call is issued, which has tremendously sped up the refresh cycle for the list of variables.
Thank you in advance for your insight in this matter,
John DeCroosHello Brian A.,
In response to you comment --
"in 2006, and John did not follow up with any more information for Efosa"
-- a great deal of information was provided to NI (Efosa and many, many others, up to the product manager for the DCS module). I have never heard back on a fix for this bug for the identified version of LabVIEW. The reply by Efosa here was well after we had shipped our product -- (please see date + Efosa's apology) -- we had found our own solution as is identified in the original post.
My solution was, as is also indicated in my original post, to manually bind each variable. This was unbelievably time consuming, but was all I had.
The version of software I am now working on uses far less variables, manually bound to avoid the multiple binding issue we had in the past.
I have checked the mass binding function in LV 8.5.1, it works fine now. I guess it would have been nice to have had a reply that the bug had been resolved ---- would have helped me out a bit.
Thank you,
John DeCroos -
Dear BO Experts,
We have 6 Bex querys in BI with OLEDB Parameter selected.
We created BO-WEBI Document and in this Document we inserted 6 Reports.Each report we have one Bex query attached.
For 6 queries we have common variables.when we open BI Workbook we can see only variable once.
From Date
To Date
Cost Center
But when we opened BO-WEBI, report asking us to enter variable selection 6 times i.e 6*3 = 18 times.Is there any option in WEBI which common variables can seen only once like we have property in BI Workbook.
Please suggest us.Your quick reply is appreciated
Thanks and Kind Regards,
Lakshman Kumar GHi,
Thanks for quick reply.
We are using Bex not universe.
usa same prompt text in all 6 queries. you can edit the filter objects in the universes to change the prompt text.
Could you please elaborate
Thanks and Kind Regards,
Lakshman Kumar G -
Expression Filter Performance Issues / Misuse?
I'm currently evaluating the Expression Filter functionality for a new requirement. The basic idea of the requirement is that I have a logging table that I want to get "interesting" records from. The way I want to set it up is to exclude known, "uninteresting", records or record patterns.
So as far as an implementation I was considering a table of expressions that contained expression filter entries for the "uninteresting" records and checking this against my logging table using the EVALUATE operator and looking for a 0 result.
In my testing I wanted to return results where the EVALUTE operator is equal to 1 to see if my expressions are correct. In doing this I was experiencing significant performance issues. For example my test filter matches 72 rows out of 61657 possible entries. It took Oracle almost 10 minutes to evaluate this expression. I tried it with and without an Expression Filter index with no noticeable change in execution time. The test case and query is provided below.
Is this the right use case for Expression Filter? Am I misunderstanding how it works? What am I doing wrong?
Test Case:
Version
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Objects & Query:
CREATE TABLE expressions( white_list VARCHAR2(200));
CREATE TABLE data
AS
SELECT OBJECT_ID
, OWNER
, OBJECT_NAME
, CREATED
, LAST_DDL_TIME
FROM DBA_OBJECTS
BEGIN
-- Create the empty Attribute Set --
DBMS_EXPFIL.CREATE_ATTRIBUTE_SET('exptype');
-- Define elementary attributes of EXF$TABLE_ALIAS type --
DBMS_EXPFIL.ADD_ELEMENTARY_ATTRIBUTE('exptype','data',
EXF$TABLE_ALIAS('test_user.data'));
END;
BEGIN
DBMS_EXPFIL.ASSIGN_ATTRIBUTE_SET('exptype','expressions','white_list');
END;
INSERT INTO expressions(white_list) VALUES('data.owner=''TEST_USER'' AND data.created BETWEEN TO_DATE(''08/03/2010'',''MM/DD/YYYY'') AND TO_DATE(''08/05/2010'',''MM/DD/YYYY'')');
exec dbms_stats.gather_table_stats(USER,'EXPRESSIONS');
exec dbms_stats.gather_table_stats(USER,'DATA');
CREATE INDEX expIndex ON Expressions (white_list) INDEXTYPE IS EXFSYS.EXPFILTER
PARAMETERS ('STOREATTRS (data.owner,data.object_name,data.created)
INDEXATTRS (data.owner,data.object_name,data.created)');
SELECT /*+ gather_plan_statistics */ data.* FROM data, expressions WHERE EVALUATE(white_list,exptype.getVarchar(data.rowid)) = 1;
DROP TABLE expressions PURGE;
BEGIN
DBMS_EXPFIL.DROP_ATTRIBUTE_SET(attr_set => 'exptype');
END;
DROP TABLE data PURGE;Hi,
If you are already using the queries and are stable enough then rather than modifying query you can try other options to improve the query performance like data compression of the cube, creation of aggregates, placing cube on BIA or creating cache for the query.
Best Regards,
Prashant Vankudre. -
Presentation Variable issue in OBIEE 11g
Hi,
I have 2 reports, report 1 and report 2
When i drill down on report 1 column 'Number of id's' will open the details report of Id's report 2
I am using a Presentation variable in report 2 filters (detail report) which is generated in Main report dasnbord prompt.
They have separate star schema.
Main report(reprot1) using Aggregated table.
Sub report(report2) using detail table.
Problem:
After upgradation from OBIEE 10.1.3.4 to OBIEE 11.1.1.5,(Unix server) The presentation variable value is not getting passed to the detail report. This is working completely fine in OBIEE 10g.
Is there any BUG in OBIEE 11g wrt presentation variable or do we want to change the configuration?
Thanks,
SatheeshHi,
Not sure about the behaviour in 11g, but we faced a similar issue in 10g while passing the presentation varaibles to detail report where main/detail report where coming from different subject areas. The behavior was a little unpredictable. To overcome this, we tried using request variable instead of presentation variable and it worked for us.
You can give it a try by doing the same and see if it works for you.
Thanks -
Anti-relay filter configuration issues
Configuration issues with the anti-relay filter in Messaging Server 4.1x.
The following information addresses common questions about configuration issues
with the anti-relay filter in Messaging Server 4.1x:<BR>
<P>
<OL>
<LI><B>Question:</B><BR>
What is the difference between the delivery
and submission
options?<BR>
<P>
<B>Answer:</B><BR>
The submission option
allows specified users to send email to any email address in the world.
These users are typically internal users.
<P>
The delivery option
allows specified users to receive email from anybody. These users
are also typically internal users.
<P>
A standard filter will appear something as follows:<BR>
<P>
# This is the anti-relay config file written by Jay at iPlanet
# The first section sets default conditions
resolvehostnames:0
useauthinfo:0
advertiseauthinfo:1
# This section sets domains to be delivered to by anybody
delivery:*@my.domain.com
# This section sets domains that can send any place
submission:129.12.4.*
<P>
<P>
<LI><B>Question:</B><BR>
The delivery
option works properly. However, why doesn't the
submission option
appear to be allowing emails from specified users to pass through?
<P>
<B>Answer:</B><BR>
The problem with the submission behavior could be due to the setting of the
the resolvehostnames
parameter. If this parameter is turned on
(resolvehostnames:1),
then <I>all</I> entries in this configuration file must be fully qualified
host names. Although wildcards will work, you cannot specify IP
addresses with this configuration setting.
<P>
<P>
<LI><B>Question:</B><BR>
Is it possible to allow people outside of my network to connect to the server
and send mail out?
<P>
<B>Answer:</B><BR>
Yes. To allow outside users to connect to the server and send mail
to any address, without granting the same privilege to the rest of the world,
activate the authenticated SMTP portion of the filter via the
useauthinfo option.
Setting this parameter to "1" (i.e., useauthinfo:1
) will require a user who is not in a
submission address and who is attempting to send email to an address not in
the delivery range to authenticate with a user ID and password.
</OL>
<P>
For additional information on the anti-relay filter, please refer to the
Messaging Server 4.1 Administrator's Guide at<BR>
<P>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/ubefiltr.htm#1073677Prashant:
Are you using a UBE filter to configure domain-based anti-relayinging? We had better luck with the anti-relay plug-in. There is some info on this (for 4.15) at
http://docs.sun.com/source/816-6044-10/ubefiltr.htm#1069973
You have to enable the plug-in using configutil, per the above. The anti-relay plug-in is controlled by antirelay.conf. Be aware that the pattern matching rules are very limited, and not well documented. Fortunately, the source code to the plug-in is included, and you can see what it is doing. To pass the tests we had to add a hard-coded test for a "%" in the source and recompile:
*** antirelay.c.orig Thu Oct 31 04:42:13 2002
--- antirelay.c Thu Oct 31 04:22:07 2002
*** 934,939 ****
--- 934,940 ----
* Weight must be non-zero to begin with so that matches on just "*"
* will work.
+ if( strchr(text,'%') != NULL ) return ABORT;
weight = TRUE;
for ( ; *p; text++, p++) {
if (*text == '\0' && p != '')
Not a really elegant hack, but we didn't need a fully functional regex engine. -
MovieClip Filter Causing issues with EventListeners (mouseEvent.ROLL_OVER)
Hello,
I have been working on a flash photo gallery for the web. It loads thumbnails from an xml file into a loader which is then made the child of a movieclip.
The thumbnails are animated and triggered with mouse events of ROLL_OVER and ROLL_OFF. I have this working, or appearing to, when the movieclip containing the loaded thumbnail has no filters applied to it.
I want add a drop shadow on the ROLL_OVER event and remove the drop shadow on the ROLL_OFF event. I also have this working, however my problem arises when I mouse over the very edge of the movieclip. This cauese the ROLL_OVER and ROLL_OFF function to fire in rapid succession, creating a flashing dropshadow. This looks aweful and I really have no idea what would be causing this issue.
Thanks in advance for any advice!
Regards.Thanks for the reply.
I also found it difficult to believe that the filter was causing issues with the roll over/out events. I will expand on the example code you provided so you get an idea of what I am trying to accomplish and where my issues arise.
EDIT: I should add that the issue is only present when I tween AND add a filter. If I only add a filter or if I only tween I have no issues but the combination or adding a filter and tweening causes the OVER/OUT events to fire rapidly.
//This code does not result in a flashing animation
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
//However if i add these lines of code to add and remove a filter I can observe the flashing effect when the mouse is near the edge of the moveclip
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
myClip.filters = [myDropShadowFilter];
myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
myClip.filters = [];
myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
Is there something obviously wrong with this approach to adding a filter/tweening? I am fairly new to flash.
Thanks again!
Message was edited by: Dafunkz -
Hi, I'm putting together my first shop.
I have built and tested on
IE6, then upgraded to IE7 & Firefox 2 XP PRo
IE7 XP Home
All is well and the site works fine on the XP machines. Each
client / Browser retaining its own shopping cart information.
Allowing for different users to select items.
A friend has given me 2 old machines to build a testing
workstation for browser compatability. These are both IE6 Win98
machnes although 1 will be changing. Despite a few layout issues
all seemed fine. Until I added things to the shopping basket.
It seems IE6 now (at least certainly under Win98) cannot
persist the session data across pages. I'm not sure if this could
be related to how they are conntected together (using a 10/100
switch) or if there is a setting in IE6 which would prevent this
(not sure how this would be the case) or, more worrying, am I doing
something wrong. My session/cart information is based heavily upon
the CFMX7 Web Application Contruction Kit example. So I'm not sure
what I could have done wrong.
Here is the code below. Its using NAte Wiess' own CFC and
works perfectly in IE7 and I Think IE6 on XP
Any suggestions.or if there is a setting in IE6 which would prevent this (not
sure how
this would be the case)
This is a very likely concern to investigate. For sessions to
work
correctly, by default, cookies must be enabled in the
browser. If the
browser has been configured to not accept cookies, then every
request
made from that browser creates a new session on the server.
If you want your sessions to work without cookies you can
pass the CFID
and CFTOKEN values that define an individual session through
URL
variables. This does take some work to make sure every link,
form and
any other interaction that generates a new request to the web
server
pass these values.
There are aides in ColdFusion to help you with this process,
check the
documentation for all the fun details. -
Variable issue, not declaring
Hi,
i've an issue on Production Environment. When i use a variable (both declaring or setting) i retrieve an error.
"com.sunopsis.core.SnpsInexistantObjectException: SnpSessTaskLog.getObjectByIdent : SnpSessTaskLog does not exist"
I've checked agent and connection to repo. Any idea?
Thanks in adavanceHi,
For the record, I just had the same issue and in my case and purging the logs in the Operator was enough to solve the problem.
Regards,
Jerome Fr -
Variable issue for Alternate Unit of Measure
Hello Experts
I have implemented the soultion for reporting data in Alternate Unit of measure using the "How to..." guide provided at https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
This solution involves creating a variable which prompts the user to enter the required unit of measure.
However I have a situation where I would like to create variable which is not input-ready and has a fixed value assigned to it without prompting the user. Moreover, I cannot modify the already existing input-ready variable as it is used in other Queries.
Does this involves creating a new user exit or modifying the existing user exit. If yes then can you please tell me how this can be done.
Thanks
RishiHi Rishi,
You can follow any one the below procedure for solve your issue.
1. You can change the variable by removing the check box "Ready to input". But you mentioned that you used that variable in other queries also. So, I am not suggesting this.
2. You create a new variable same as the existing variable but with out selecting "Ready to Input" check box. Now when the user run the query, that variable will not be seen to the user. Now, we will see the customer exit, you assign new variable value to existing variable, before that you have to write a condition for checking the query name. If you are running the query which have the new variable then assign the variable value to old variable. This will solve your question.
I hope you understood this procedure. If you have any doubts let me know.
Regards,
Patil. -
Variable issue in crystal report
Hi Experts,
I hope you are doing the good job and i developed the BEX report which is developed 3 variables , one of the variable is in navgational attribute and remain 2 attributes in char which is working fine and we developed the crystal report on top of bex query its working fine after that as per requirement i changed navgational attribute and variable .Now the crystal report is not showing the variable prompt which i build on Nav attribute.So plz pass your inputs on this issue.
Regards
RKDear Kumar,
Thank you very much for you reply and we using the below mentioed details.
Exact version:4.1,support pack/service pack:sp3,patch level of CR:0
SAP BI:7.3
Regards
RK
Maybe you are looking for
-
hello, I have the following problem with my Yahtzee game: I use a class DicePanel with there on five instances of class 'Dice'. When you push the 'throw' button on the panel, I want the panel to check if there is actually something selected. Because
-
Can't figure out how to update my iPad (4.3.5) so I can run icloud.
I want to upgrade my iPad so I can run icloud. I go to settings but there is no place to update. Any thoughts?
-
I have a 24" aluminum iMac with a miniDP, trying to connect it to a 20" TV that has S-video, composite, and component inputs. Here's the TV: http://reviews.cnet.com/flat-panel-tvs/sylvania-6620ldt-20-lcd/4505-6482_7-32157 042.html Which input would b
-
Hello: I have notices that some of you speak about "pinging" to get a router speed. Please excuse my ignorance but how do I do this "ping". I vaguely recall our IT guy at work typing soming similar after accessing a window that looked liked DOS. I
-
Deleting Universal Binary Files
I have just downloaded OS X Lion and I am trying to delete some file on my Macbook to speed things up. I have downloaded cleanmymac and it had found universal binary files. Can i delete theses. I am using a mac with 2.4 GHz intel core 2 duo.