Filtering and Find by Date : not very intuitive

Lightroom is a fantastic program fast, stable, easy to use, and generally very intuitive although I am finding the Library Filter in 2.0 to be a step backwards from the search facility in LR1.4. Here are the issues:
(1) Filtering the Library to find photos between dates used to be easy in the LR1.4 Find panel just type in the from and to date or use the slider or the handy drop down showing last week or last year. But in 2.0 I get two choices of date display: Flat (too long and cumbersome) or hierarchical. Hierarchical is my preferred view but it is not possible to replicate LR1.4 behaviour by filtering between dates: shift clicking between two specific dates in hierarchical view includes too much in the return.
(2) In the keywords column of the Metadata Library Filter, if you highlight two keywords by shift clicking then you it returns keyword 1 OR keyword 2 surely it should be AND? So if I want to find photos with keyword monochrome and keyword landscape it is not possible in the Metadata Library Filter. The answer is to use the Text Library Filter but Im just surprised it doesnt work in the Metadata filter.
(3) Another way of keyword filtering is the little arrow next to the number in the Keyword List on the right panel of Library. But that cannot be used in conjunction with the Library Filter - its just one or the other. And if you shift click to highlight two keywords in this panel it is just filters by the last keyword to be highlighted, not both.
(4) When I switch between folders the last filter used in that folder is retained even on a new Lightroom session. Surely switching to a new folder should either retain the current filter or switch the filter off completely.
None of these are bugs its done by design. Its not major I know, because all of these issues have work arounds its just that everything else in LR is so intuitive, and some of these issues are a bit of a step backwards from 1.4.

(1) Use Ctrl/Cmd Click to select the dates
(2) Selecting keywords within a column is OR selecting keywords across multiple columns is AND. You can configure the panel for up to 8 keyword columns and this can be saved for future use. Again, using Ctrl/Cmd click on individual keywords within or across multiple columns allows you refine the filter.
(3) The arrow was for Quick filtering of single selection keywords.
(4) The behaviour is as designed and resulted from all the pi...g and moaning that took place during the life of 1.x. Folk wanted local filters, not the global system that was present in Lr1.x. By default and assuming you haven't already filtered a folder it will be set to None. However, your choice is sticky, so having filtered a folder once it will continue to use that filter until you change it to something else.

Similar Messages

Export and import of data not table and data ????

hii brothers and sister
plz i have a a quetion about Export and import of data in oracle forms
i have created 02 boutons one for export his trigger like this :
eclare
alrt number;
v_directory varchar2(200) := 'c:\backup'; --- that if the C Drive not the Drive that the windows had installed in it.
path varchar2(100):='back_up'
||to_char(sysdate,'dd_mm_yyyy-hh24_mi_ss');
v_exp varchar2(200) := 'exp hamada/hamada2013@orcl file = '
||v_directory
||'\'
||path
||'.dmp';
begin
host(v_exp);
alrt:=show_alert('MSG');
end;
and the bouton import is like this
declare
alrt number ;
v_ixp varchar2(200) := 'imp userid=hamada/hamada2013@orcl file =c:\backup2\back.dmp full=yes';
begin
host(v_ixp);
alrt:=show_alert('MSG');
ref_list;
end;
i have just one table "phone"
this code is correct he expot not only the data but also the creation of the table ....for exemple i do export and evry thing is good until now and i find the .dmp in the folder backup .. but when i deleted all data from my app and try to import this .dmp iit show me error it tell me thet the table phone is already created ....
so plz help wanna just export the data of phone not the creation of table and data ???? or how can i import just the data from this .dmp ??

Pl post OS and database versions.
You will likely need to use the IGNORE flag - http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_import.htm#sthref2201
Imp utility (by default) will try and create the table first. Since the table already exists, imp reports an error. Use the IGNORE flag in your imp command to not report such errors.
HTH
Srini

Organize in Finder by Date, not by Roll?

I've been using iPhoto for quite a while. And I've been used to uploading photos to Snapfish, which uses the same folder structure as the Finder used to organize iPhoto, so it was easy to find any photo by date. I could upload all the photos from July 4, for example, by finding iphoto/2006/07/04. Easy enough.
But now in iPhoto 6 there's this blasted "roll" category. When I try to upload, I have to look in iphoto/2006/modified/roll 821 or whatever roll it is. Plus iPhoto 6 has taken my nice folder-dated organizational structure and changed it to this roll structure, which is ineffective. Now if I see a photo in iPhoto, I have no idea of finding where on my hard drive it is, unless I want to search by the DSCN number. And I don't know what roll iPhoto thinks it is (I've chosen to sort by ascending date). Shouldn't the roll show up in the info box?
So I'm looking for some way to change the roll structure back to the original date structure (year / month / day). I want to be able to upload easily to services such as Snapfish and I want to be able to manage the photo files in the Finder rather than through iPhoto. I can't backup my photos easily by dragging them to a hard drive, for example, without exporting them first (waste of time). Or I can't look easily at the folder for July 2006 and see what dates I've already uploaded from my camera.
Andrewrchambers posted a question (http://discussions.apple.com/thread.jspa?threadID=561829&tstart=0) about organizing folders, which was a start, but didn't answer my question.
I want to use the beautifully designed Apple Finder feature to automatically put photos into dated folders like it used to and get rid of the roll feature entirely. Who can help?

It was in response to many who wanted a system that was based on folders representing "shoots", more in line with the many professional image management systems available. iPhoto's use has grown beyond the causal home photographer and Apple was just meeting the greater demand for more user control of file storage and folder identification.
I upload my photos to a folder on the desktop, then title the folder with the shoot date (I'm not a pro) and a brief description. I then use R-Name to batch sequentially name the files with the internationadate format, YYYY-MM-DD-01.jpg, etc. This gives me great chronological search and sort.
Also for finding files by date you can use the Calendar at the bottom of the Source window. You can retrieve files by year, month or individual date. One you find the file you're looking for, a Control-click on the thumbnail and a selection of the Show file option will take you to the folder that contains the file and the file will be selected.

Filters and rules for Data Synchronizer

Unfortunately or luckily our datasync server is positioned in the internal
network. The main reason is the archiving solution for groupwise mail which
uses a special connector on the datasync server to capture all email for
specific mailboxes. So the entire mailflow can remain in our internal
network and is not transferd out in the DMZ.
But for few devices (like iPhone, iPad or smartphones with Android) with active
sync protocol I want to sync the groupwise email, appointment and contacts
to that devices.
My problem, however is that the mobile devices want to use a secure connection on port 443 to get over 2 Bordermanager 3.9 SP2 servers.
I did́ t find any examples on filters and rules in the documentation to
do this.
My idea is to use a nated public ip adress on the outer BM-server and
acceleration on the inner BM-server.
Maybe I am wrong and there are or is a better solutions.
It would be great, if there is anyone who can help me with this problem
Best regards

jeep,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

ICal and Address book data not pushed from iCloud to 10.6 Snow Leopard

Hello,
When I signed up to iCould, it said it will automatially push all data to my devices.
However, the data I entered in contacts and calendar of my iPhone 4, does not appear in the Address Book and iCal of my MacBook Air with 10.6.8 Snow Leopard.
Nether address book nor iCal gives the possibility to choose this type of syncing in preferences (there's only mobile me account mentioned there, to which I cannot sign up anymore).
I checked in my icoud.com - i can see my new iCal data from iPhone there, but the address book is exaclty the same as in my MacBook Air. In other words, my new contacts are neither pushed from my iPhoe to iCloud (though I did choose this option in my iPhone), nor from icould to my Mac Book Air.
Moreover, iTunes no longer syncs neither my Adreess Book nor iCal data manually since I've signed up for icoud. It says I do not need to sync via iTunes, as now all this data will be pushed from iCloud (which isn't happening). Even though I try to do it manually, the new data on iPhone simply does not show up in my Mac Book Air after the syncing is finished.
Can someone please help me deal with this problem. Or maybe you know how to get to good old times, when I could sync everything manually?
Would be very grateful for any advise.
Ramunas
p.s. notes seem to be working ok

I read an article in Apple Support not long ago about some features in iCloud that were usable in Snow Leopard, but I can't find it right now. I believe some syncing to iCloud from iTunes.
Possible update to SL coming.
http://www.macstories.net/news/snow-leopard-to-get-basic-icloud-compatibility-wi th-10-6-9/
This might help you sync:
http://www.macstories.net/news/snow-leopard-to-get-basic-icloud-compatibility-wi th-10-6-9/

Daily disconnects and Like the Oscars not very ori...

Hi
Wonder if you guys could shed light on an issue on an issue I am currently having. Are you seated comfortably then I shall begin.
Received an email beginning of December last year about exchange being upgraded and since then nothing but problems. Think it could be down to noise level fluctuations. (Unsure as I am not a comms engineer) Last night went to bed and the noise level was 10.8db woke up this morning to a disconnected broadband and the bt hub has the noise level at 1.8db. Also this has started to become twice a day connections and usually my speed drops to half normal. i.e. 8Mb to 4Mb. Now nothing has changed internally over the last 7 years were we have had a very stable 8Mb connection.
Had an engineer come out and test the line and he says everything was fine. The exchange could see the disconnections and moved me over to an E Side and still has not solved the problem. Got another engineer coming out on Tuesday to do another test. Still to do a quiet test (17070) but since an engineer has been out would they have picked that up?
I have an NTE5 master socket and all brand new filters plus BT Hub V3 Running Software version V100R001C01B031SP09_L_B.
The Bt home hub has been connected (24hrs) to the master test socket and the dropouts still happen. Below is an example logs of a disconnection from the hub:
10:20:31,03 Mar. PPP LCP Send Configuration Request
10:20:28,03 Mar. PPP LCP Send Configuration Request
10:20:24,03 Mar. PPP LCP Send Termination Request
10:20:21,03 Mar. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_ISP_TIME_OUT]
10:20:21,03 Mar. PPP LCP Send Termination Request
07:05:09,03 Mar. DHCP Lease renewed for IP ***********to host ****** (MAC *************), duration: 1 day
07:05:09,03 Mar. Receive a DHCP request: **********, ***********.
03:11:20,03 Mar. Possible PS or DA. src=58.218.199.227 DST=31.52.56.140 LEN=40 TOS=0x00 PREC=0x00 TTL=110 ID=256 DF PROTO=TCP SPT=12200 DPT=1080 WINDOW=8192 RES=0x00 SYN URGP=0
At the bottom the Chinese government trying to attack me at 3.10 in the morning sheesh what have I done to them.
Here we have an example Line status from the hub
Now from all this can anybody suggest what the real problem is? Or could I be onto something with the noise level. It is a gradual deterioration over time with noticeable changes in web page performance. (although many other factors can affect this)

You maxmum speed is show in red below.
Your downstream target SNR (Noise Margin) is probably set too low for your line. Its normally about 6dB for ADSL max, but your last reading was very low indeed.
I have explained a bit about noise margins here, and there is a suggestion at the end which may help.
Noise margins
I know you have tried the test socket, but were the results that you displayed earlier taken with the home hub plugged into the test socket? If not, could you please provide a set of readings in that position?
Also, do you have any extensions connected to the test socket?
Speed estimate
Estimation of your maximum rate adaptive adsl speed
Downstream
Attenuation
dB
Approx
Line Length
km
dslMAX
kbps
IP Profile
kbps
adsl2+ (21CN)
kbps
IP Profile
kbps
adsl2+ (LLU)
kbps
Throughput
kbps
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Finder modification dates not working

Why is it that after all this time and all the updates to OSX, it still cannot update the dates on newly saved files correctly?
When I do a find and replace across multiple files with BBEdit and they are auto-saved, the Finder does not update the modification dates. If I set the window to 'sort by date' all the modified files should have today's date and float to the top - but they don't.
I know about 'nudge'- http://www.brockerhoff.net/nudge/index.html thanks to BareBones support, but this really should not be necessary.
G5 Mac OS X (10.4.8)

I would suggest a one-line Applescript:
tell application "Finder" to update folder (folder of the front window as string)
Click here to launch Script Editor.
Paste the script in the Script Editor and press the "Run" button. The front window will update. You can enable the Applescript Menu* for quick access, and put the script in the "Finder folder so it is always in front when Finder is in focus.
This may be a bug in BBEdit, I haven't seen the problem in at least a year.
* To enable the Applescript Menu, open the application at
/Applications/AppleScript/AppleScript\ Utility.app
and select "Show Script Menu". Any application that is in front has its own script menu so it is always changing. You can create a folder for the frontmost application by clicking the menu icon, then selecting "Open Scripts Folder", then "Open __ Scripts Folder". A new empty window will appear ready for you to populate with Applescripts.

Glow filters and tween class does not work!!

hi!!!! this is my problem...
I have inserted on stage through attachmovie a mc and copied
6 times through the cycle for. . now through the class filter I
have assigned for everyone the effect always through the cilo for,
but I do not succeed to assign transition that is to the effect
movement of the filter glow to all the mc
for all the rollOut and rollOver works (this is looked at
from the small hand and trace) but the every time that step small
hand on whichever only mc to a part the transition of the
effect…
now i show the code of my fla files that is in first frame...
quote:
import flash.filters.GlowFilter;
/*import flash.filters.*;*/
import mx.transitions.Tween;
import mx.transitions.easing.*;
//imposto le variabili posizione
var posX:Number = 80;
var posY:Number = 370;
//creo l'array di testo delle icone e del numero delle icone
var testoIco:Array = new Array ("VIDEO","MOTION
GRAPHICS","WEB SITES","ILLUSTRATIONS","BRAND","PHOTO");
setUpButtons();
function setUpButtons()
var gf:GlowFilter = new GlowFilter(0x000000, 100, 0, 0, 3,
3, false, false);
//dichiaro gli effetti e li imposto
var blurXTween:Tween = new Tween(gf, "blurX",
Elastic.easeOut, 5, 5, 1, true);
var blurYTween:Tween = new Tween(gf, "blurY",
Elastic.easeOut, 5, 5, 1, true);
//imposto il valore btnCnt
var btnCnt = testoIco.length;
/*ciclo for per attaccare il simbolo item dalla libreria e
per moltiplicarlo
sullo stage e dargli l'effetto*/
for(var i=0; i < btnCnt; i++)
//attacco l'icona dalla libreria
var icon:MovieClip = this.attachMovie("icon","icon" + i,
i+1);
var temp = this["icon"+i];
temp.icona.testo.textButton = testoIco
temp._x = (127*i) + posX;
temp._y = posY;
temp.ref.setMask(temp.mask);
var glow:Array = this["gf"+i];
temp.filters = [gf];
/*applico l'effetto alle icone rollOver rollOut*/
temp.onRollOver = function ()
blurXTween.continueTo(20, 2);
blurYTween.continueTo(20, 2);
temp.onRollOut = function ()
blurXTween.continueTo(5, 2);
blurYTween.continueTo(5, 2);
blurXTween.onMotionChanged = function ()
temp.filters = [gf];
i need help!!!
sorry for my bad english....

Thanks jtahlborn for this fast reply.
Unfortunately it doesn't work, if I change the code of WebServiceBean to the following:
@Stateless
public class WebServiceBean
     @EJB
     ControllerBean controller;
     @EJB
     JPAServiceLocal jpa;
}Error message:
javax.naming.NamingException: Error occurs while the EJB Object Factory trying to resolve JNDI reference Reference Class Name: com.x.y.z.ControllerBean
Do I have to define any parameter with the @EJB annotation, like name or bean-name or put something into ejb-jar.xml?
The second idea is not an option for me, I don't wanna make ControllerBean a POJO
Cheers

Dimension Current Flag and Last Update date not updated - SLD issue!

Hi.
ODI is running pretty well now. I have created several interfaces from flats, multi database tables, but still have to test the services and cdc, etc... later I will do this.
I am having a small issue here when dealing with Slowly Changing Dimensions. I am trying to populate a product dimension. I use a Load KM and the SLD KM. Then I update a product row in the source, and I wish to make sure that type-II runs OK for major and minor changes after running the interface.
Well minor changes run ok, deletes don't run at all, and update for major changes should generate another surrogate key and turn the old record "current flag" to zero and "close"/update the last update date as well!!!
What am I missing here? Is this related to the KM restrictions?
"Restrictions:
- Make sure to map ALL target table columns flagged as: "Surrogate Key", "Natural Key", "Current Record Flag", "Start Timestamp" and "End Timestamp". Notice that mappings set for the "Current Record Flag", "Start Timestamp" and "End Timestamp" columns are not used."
Do I need to implement somehow that behaviour or use another KM?
Another question regarding data warehousing: Well usually in a bespoke DW we can have N sources, N staging areas, and several data marts. Using ODI, for instance what are the best practises to create or simulate this behaviour??
I know that using a Knowledge Module I can load/extract (to temp tables in the source work schema), then integrate in the target schema.. using the same schema to temp staging tables or another schema.... what is the best aproach?
Any dw people wants to share some experiences here?
Thank you all.
Best regards,
Alvaro
Message was edited by:
Alvaro Silva

Thanks Cezar :)
Well Updates work if I unckeck 262!!! :) But deletes are not setting the CURR to zero!!!
PS: um abraço para ti também .... o mundo é pequeno! :) será que podes adicionar-me no messenger para alguma troca de experiências? [email protected]
Alvaro
Message was edited by:
Guest

How to export and import only data not table structure

Hi Guys,
I am not much aware about import ,export utility please help me ..
I have two schema .. Schema1, Schema2
i used to use Schema1 in that my valuable data is present . now i want to move this data from Schema1 to Schema2 ..
In schema2 , i have only table structure , not any data ..

user1118517 wrote:
Hi Guys,
I am not much aware about import ,export utility please help me ..
I have two schema .. Schema1, Schema2
i used to use Schema1 in that my valuable data is present . now i want to move this data from Schema1 to Schema2 ..
In schema2 , i have only table structure , not any data ..Nothing wrong with exporting the structure. Just use 'ignore=y' on the import. When it tries to do the CREATE TABLE it (the CREATE statement) will fail because the table already exists, but the ignore=y means "ignore failures of CREATE", and it will then proceed to INSERT the data.

Need help: When installing iTunes on Windows 7, installer is stopping at "Installing Apple Application Support". Can anyone help....this is the first time I am using an Apple product and it sure is not very user friendly!!!

I am trying to install itunes but the installer is not going beyond the "Installing Apple application support" stage,

Do you have any of these programs installed?
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
I had the trouble that if an old #4 or #5 was installed, a full iTunes install did not work.
If you have any of the above installed, try this,
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923

Can't open behaviors or Filters and Browser window is not available

I have reinstalled Motion 3.0.2 twice now for Final Cut Studio pro and I get a screen that comes up for the workspace but no browser window, no access to behaviors or filters. Has anyone ever had this issue and resolved it.

Gotta ask two questions:
1. Are the windows indicated as being open and visible in the View or Windows menus?
2. Have your tried changing the resoution of your monitor display to see if the windows are just living off the edge of your screen.
bogiesan

How do I upload a PDF for conversion, the website is not very intuitive., How do I upload a PDF for conversion, the website is not very intuitive.

I think the title says it all.

Hi Dkholes,
Your title got right to the point! Please check out Getting Started with ExportPDF | Adobe Community. You'll find step-by-step instructions for converting a document.
Please let us know if you have additional questions.
Best,
Sara

I am Apple Fans. But I am totally diappointed by iPhone 5. I am using iPhone 5 and find the Apps not compateble with the software. Their pages are having 2 big black banner at top

For iPhone 5 with IOS6, all Apps appear ugly page on the screen. There is 2 black banner at top & bottom of the screen. It is totally acceptable.
I am your Apple Fans. But this phone make me extremely dissatisfied.

If "It is totally acceptable" why does "this phone make me extremely dissatisfied"?
You must have a white iPhone 5. With a black one the black bars are not so obvious.

Keyboard directions keys and mouse pads are not very supportive in Pavillion G6 series

Hi All,
I have been using my Pavillion G6 series since 6 months now. The mouse pad and the direction keys have already started behaving as if they have become they are ages old. What should be done in this condition?

Hi. can you please explain further? Do you mean the sensitivity? You can easily change the settings on this.

Filtering and Find by Date : not very intuitive

Similar Messages

Maybe you are looking for