Filtering by Entry Point
At customer side there is a portal implemention which uses filtering by entry point functionality.
Now i've upgraded the system from 7.0 SPS18 to 7.01 SP08 and the filtering by entrypoints function is not working any longer.
I've checked everything and the settings are the same like before the upgrade.
Anybody else allready faced this problem?
Best regards,
Thomas Kuri
Hi Thomas,
Have you checked navigation_events_helper service, whether FilterbyDesktopView property has been set to true?
Refer to :
http://help.sap.com/saphelp_nw70/helpdata/en/5e/e855a35455458aa4df21a4339722c7/content.htm
Thanks
Prashnat
Similar Messages
-
Procedure Entry point HandleWindowFont
Getting this error message regarding procedure entry point....You can click through it and it will eventually open but it's annoying as heck to have to do this every time I want to use PE11. Any advise will be appreciated...
System info:
Adobe Photoshop Elements Version: 11.0 (11.0 (20120922.r.32287)) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2292 MHz
Built-in memory: 8106 MB
Free memory: 5824 MB
Memory available to Photoshop Elements: 3255 MB
Memory used by Photoshop Elements: 70 %
Image tile size: 128K
Image cache levels: 6
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1600
Video Card Number: 1
Video Card: Intel(R) HD Graphics Family
Driver Version: 8.15.10.2345
Driver Date: 20110326000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Video Mode: 1600 x 900 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics Family
Video Card Memory: -234 MB
Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
Temporary file path: C:\Users\JOHNSN~1\AppData\Local\Temp\
Photoshop Elements scratch has async I/O enabled
Scratch volume(s):
C:\, 679.0G, 164.6G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
Additional Plug-ins folder: C:\Program Files (x86)\Adobe\Plug-Ins\Filters\Filter Forge 3\
Installed components:
ACE.dll ACE 2011/03/29-16:11:44 63.457850 63.457850
adbeape.dll Adobe APE 2011/01/17-12:03:36 64.452786 64.452786
AdobeLinguistic.dll Adobe Linguisitc Library 5.0.0
AdobeOwl.dll Adobe Owl 2012/06/20-18:39:56 4.1.9 78.509892
AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
AdobePDFL.dll PDFL 2011/03/29-16:11:44 63.378681 63.378681
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2010/10/12-08:45:30 63.139439 63.139439
AdobeXMPFiles.dll Adobe XMP Files 5.0 61.134777
adobe_caps.dll Adobe CAPS 4,0,42,0
Adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00) 1.000000
AGM.dll AGM 2011/03/29-16:11:44 63.457850 63.457850
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 1.486530
aif_ogl.dll AIF 3.0 1.486530
amtlib.dll AMTLib 4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00) 1.000000
amtservices.dll AMTServices 4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00) 1.000000
ARE.dll ARE 2011/03/29-16:11:44 63.457850 63.457850
asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
AXE8SharedExpat.dll AXE8SharedExpat 3.3 49.279053
AXEDOMCore.dll AXEDOMCore 3.3 49.279053
AXSLE.dll AXSLE 3.3 49.279053
Bib.dll BIB 2011/03/29-16:11:44 63.457850 63.457850
BIBUtils.dll BIBUtils 2011/03/29-16:11:44 63.457850 63.457850
boost_threads.dll DVA Product 5.0.0
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2011/03/29-16:11:44 63.457850 63.457850
data_flow.dll AIF 3.0 1.486530
dvaadameve.dll DVA Product 5.0.0
dvacore.dll DVA Product 5.0.0
dvaui.dll DVA Product 5.0.0
ems.dll Elements Organizer 11.0
ExtendScript.dll ExtendScript 2010/03/05-08:21:15 61.423205 61.423205
FaceDetector.dll FaceDetector 0000/00/00-00:00:00 2.0.1.1 2.0.1.1
FileInfo.dll Adobe XMP FileInfo 5.0 61.134777
filter_graph.dll AIF 3.0 1.486530
hydra_filters.dll AIF 3.0 1.486530
icucnv36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
icudt36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
image_compiler.dll AIF 3.0 1.486530
image_flow.dll AIF 3.0 1.486530
image_runtime.dll AIF 3.0 1.486530
JP2KLib.dll JP2KLib 2011/03/29-16:11:44 63.196876 63.196876
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
MPS.dll MPS 2011/05/24-09:45:42 63.464027 63.464027
MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.30319.1
MSVCP71.dll Microsoft® Visual Studio .NET 7.10.3077.0
MSVCR100.dll Microsoft® Visual Studio® 2010 10.00.30319.1
MSVCR71.dll Microsoft® Visual Studio .NET 7.10.3052.4
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop Elements Editor 11.0
platform.DLL Adobe Help System 1, 0, 0, 1
Plugin.dll Adobe Photoshop Elements Editor 11.0
PSArt.dll Adobe Photoshop Elements Editor 11.0
PSViews.dll Adobe Photoshop Elements Editor 11.0
ScCore.dll ScCore 2010/03/05-08:21:15 61.423205 61.423205
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
Tbb.dll Intel(R) Threading Building Blocks for Windows 2, 2, 2009, 1011
updaternotifications.dll Adobe Updater Notifications Library 2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 2.0.0.15
WRServices.dll WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
Required plug-ins:
Accented Edges 12.0
ADM 3.11x01
Angled Strokes 12.0
Auto Divide 11.0.0.0 (11.0 (20120922.r.32287))
Average 12.0.2
Bas Relief 12.0
BMP 12.0.2
Camera Raw 7.4
Chalk & Charcoal 12.0
Charcoal 12.0
Chrome 12.0
Clouds 12.0.2
Color Halftone 12.0.2
Color Variations 12.0.4 (12.0.4x001)
Colored Pencil 12.0
Comic NO VERSION
CompuServe GIF 12.0.2
Conté Crayon 12.0
Correct Camera Distortion 12.0.2
Craquelure 12.0
Crop and Straighten Photos Filter 12.0.2
Crosshatch 12.0
Crystallize 12.0.2
Cutout 12.0
Dark Strokes 12.0
Difference Clouds 12.0.2
Diffuse Glow 12.0
Displace 12.0.2
Dry Brush 12.0
Extrude 12.0.2
FastCore Routines 12.0.4 (12.0.4x001)
Fibers 12.0.2
Film Grain 12.0
Filter Gallery 12.0
Fresco 12.0
Glass 12.0
Glowing Edges 12.0
Grain 12.0
Graphic Novel NO VERSION
Graphic Pen 12.0
Halftone Pattern 12.0
Ink Outlines 12.0
Lens Blur 12.0
Lens Flare 12.0.2
Lighting Effects 12.0.4 (12.0.4x001)
Liquify 12.0.1
Matlab Operation 12.0.4 (12.0.4x001)
Mezzotint 12.0.2
MMXCore Routines 12.0.4 (12.0.4x001)
Mosaic Tiles 12.0
Multiprocessor Support 12.0.4 (12.0.4x001)
Neon Glow 12.0
Note Paper 12.0
Ocean Ripple 12.0
OnEdge 1, 0, 0, 1
Paint Daubs 12.0
Palette Knife 12.0
Patchwork 12.0
Pen and Ink NO VERSION
Photocopy 12.0
Picture Package Filter 12.0.4 (12.0.4x001)
Pinch 12.0.2
Pixar 12.0.4 (12.0.4x001)
Plaster 12.0
Plastic Wrap 12.0
PNG 12.0.2
Pointillize 12.0.2
Polar Coordinates 12.0.2
Polar Coordinates 12.0.4 (12.0.4x001)
Poster Edges 12.0
Radial Blur 12.0.2
Read Watermark 4.0
Reticulation 12.0
Ripple 12.0.2
Rough Pastels 12.0
Save for Web & Devices 12.0
ScriptingSupport 12.0.4
Shear 12.0.2
Smart Blur 12.0.2
Smudge Stick 12.0
Solarize 12.0.2
Spatter 12.0
Spherize 12.0.2
Sponge 12.0
Sprayed Strokes 12.0
Stained Glass 12.0
Stamp 12.0
Straighten and Crop Image 12.0.4 (12.0.4x001)
Straighten Image 12.0.4 (12.0.4x001)
Sumi-e 12.0
Texture Fill 12.0.4 (12.0.4x001)
TextureSelect 12.0.4 (12.0.4x001)
Texturizer 12.0
Tiles 12.0.2
Torn Edges 12.0
Twirl 12.0.2
Underpainting 12.0
Water Paper 12.0
Watercolor 12.0
Wave 12.0.2
WIA Support 12.0.4 (12.0.4x001)
Wind 12.0.2
ZigZag 12.0.2
Optional and third party plug-ins:
Accented Edges 10.0 (x101)
Angled Strokes 10.0 (x101)
ASDStrm 1.03x2
Auto Divide 10.0.0.0 (10.0 (20110831.m.17215))
Average 11.0 (11.0x001)
Bas Relief 10.0 (x101)
Chalk & Charcoal 10.0 (x101)
Charcoal 10.0 (x101)
Chrome 10.0 (x101)
Clouds 11.0 (11.0x001)
Colored Pencil 10.0 (x101)
CompuServe GIF 11.0 (11.0x001)
Conté Crayon 10.0 (x101)
Correct Camera Distortion 10.0
Craquelure 10.0 (x101)
Crop and Straighten Photos Filter 11.0 (11.0x001)
Crosshatch 10.0 (x101)
Cutout 10.0 (x101)
Dark Strokes 10.0 (x101)
Difference Clouds 11.0 (11.0x001)
Diffuse Glow 10.0 (x101)
Dry Brush 10.0 (x101)
Film Grain 10.0 (x101)
Filmstrip 11.0 (11.0x001)
Filter Forge 3 3.014.28113.7042 Release, April 19, 2013 10:20
Filter Forge 3 3.014.28113.7042 Release, April 19, 2013 10:20
Filter Gallery 10.0 (x101)
Frame From Video 6.0
Fresco 10.0 (x101)
Glass 10.0 (x101)
Glowing Edges 10.0 (x101)
Grain 10.0 (x101)
Graphic Pen 10.0 (x101)
Halftone Pattern 10.0 (x101)
Ink Outlines 10.0 (x101)
Magic Extractor 12.0.4 (12.0.4x001)
Matlab Operation 11.0 (11.0x001)
Mosaic Tiles 10.0 (x101)
Neon Glow 10.0 (x101)
Note Paper 10.0 (x101)
NTSC Colors 11.0 (11.0x001)
Ocean Ripple 10.0 (x101)
OnEdge 1, 0, 0, 1
Paint Daubs 10.0 (x101)
Palette Knife 10.0 (x101)
Patchwork 10.0 (x101)
PCX 11.0 (11.0x001)
Photocopy 10.0 (x101)
PhotomergeUI 12.0.4 (12.0.4x001)
Picture Package Filter 11.0 (11.0x001)
Pixar 11.0 (11.0x001)
Plaster 10.0 (x101)
Plastic Wrap 10.0 (x101)
PNG 11.0 (11.0x001)
Poster Edges 10.0 (x101)
Reticulation 10.0 (x101)
Rough Pastels 10.0 (x101)
Smudge Stick 10.0 (x101)
Solarize 11.0 (11.0x001)
Spatter 10.0 (x101)
Sponge 10.0 (x101)
Sprayed Strokes 10.0 (x101)
Stained Glass 10.0 (x101)
Stamp 10.0 (x101)
Straighten and Crop Image 11.0 (11.0x001)
Straighten Image 11.0 (11.0x001)
Sumi-e 10.0 (x101)
Targa 11.0 (11.0x001)
Texture Fill 11.0 (11.0x001)
TextureSelect 10.0 (10.0x001)
Texturizer 10.0 (x101)
Torn Edges 10.0 (x101)
Underpainting 10.0 (x101)
Water Paper 10.0 (x101)
Watercolor 10.0 (x101)
Wireless Bitmap 11.0 (11.0x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices: NONE
Hope this helped. I opened finally this morning after about 20 or so clicks on the ok button... -
Hi all! Question is:How can I make a room as entry point?
I have made new room and I need some users to access this room directly after logon.
Hello Anton:
There are two possibilities:
1. you can use a page as an entry point with a link to the room. (the URL you find within the room maintenance of a room).
2. you use the room directory as an entry point and define the iView parameter to the room name. This way only this room will be displayed.
The search filters you have to set to False in this case.
iView Property Room Name
ViewParameter LARGE or NARROW
TabParameter ALL or MYROOMS or COMMUNITIES
or ALLROOMS
CategoryFilterParameter true or false
CategoryParameter valid category
TemplateFilterParameter true or false
TemplateParameter valid template
SearchFilterParameter true or false
SearchStringParameter room name
Best regards,
Tanja -
Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found
When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.
-
Error message after allowing an upgrade:My dialogue box in the error message says: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll--this happened after I allowed an upgrade to be installed. I have HP Windows 7. Now my Iphone will not sync. What do I do?
Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36I started up and plugged in my iPad and then the following message came up:
iTunes
❗️This iPad cannot be used because the required software is not
Installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient
Privileges to start system services.
Abort. Retry. Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
Your computer. Try reinstalling the program to fix the problem.
OK
Press OK and then the next message:
iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
OK
Any suggestions? -
Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?
Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear. -
Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll
Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
ArunPlease try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta -
2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.
This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.
-
Hi,
Since downloading the updated version of itunes around May this year I have had the following problems:
1. This error message appears when my windows account launches:
the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
You can guess that I am not a very happy bunny with itunes at the moment!
Please, can anyone suggest how to sort this lot out. I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library. I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
Thank you for your time.
MichelleThank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle -
Can LabVIEW call a DLL built with VS(2005) C++ with /CLR and Without an Entry Point
My project requires me to convert a C++ program to a DLL and having it called by LabVIEW. Due to the complexity of this C++ program (converted from fortran using f2c -C++ option), it cannot be compiled without using /clr option. I did build the application standalone (/clr), and it functioned fine. When I build it into DLL using VS2005, I was forced to use No Entry point option and without using DllMain in the C++ code. Eventually the DLL was built without error. But after I call it from LabVIEW, I was not getting calculated results as expected. I added a testing function to the C++ code of the DLL and just try to modify a parameter, it will not, but only return the input numbers. I was passing data by pointer and not by value, so I expect this parameter output be modified. I suspect that the DLL didnt get executed at all as it has no entry point specified.
Am I on the right track to approach this task, or I am heading to totally wrong direction here? I believe due to the fact that my C++ was from f2c and use vsf2c.lib and so on, the code is managed code, so that a regular DLL cannot be built from it with an entry point. How can LabVIEW call such a DLL? Am I right on that? I really need your advice here for a right approach to this problem and possible implementation "watch outs"...Thanks!
BryanHi...Finally I was able to compile my code with an entry point defined and without using /clr. I can also call this DLL from LV and got back a variable from a little test function added to the DLL. But the function that was used for my main application in the DLL crashed LV and I got a pop up box from Microsoft Visual C++ Runtime Library: Runtime Error! "This application has requested the Runtime to terminate it in an unusual way, please contact the application's support team for more information". In Visual Studio I also got the following message: (I eliminated most of the "No symbols loaded" messages that are not errors but just info.) I would apprciate if someone can take to look with your more "experienced eyes", many thanks! Bryan.
'LabVIEW.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\xpsp2res.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\Shared\nicont.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\Shared\NICONTDT.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\nitaglv.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\lkbrow.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\lkrealt.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvdaq.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvdesktop.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvfp.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\mfc71.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\MFC71ENU.DLL', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\vi.lib\FieldPoint\SubVIs\FPLVMgr.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvfprt.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\LvProjectProxy.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\LvRealTimeCoreProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\MVEProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtCore4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtXml4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtGui4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\mxLvProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\nimxlcpp.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\nimxlc.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\variable.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\lvMax.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\MAX\UI Providers\FieldPoint71.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\MathScriptParser.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'Z:\bli\development\projects\galfitDLL\Debug\galfitDLL.dll', Symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700\msvcr80.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\mesa.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\mscms.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\icm32.dll', No symbols loaded.
The thread 'Win32 Thread' (0xf94) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x90c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xfd0) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x284) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xdac) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa98) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x528) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x614) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa5c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xebc) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x5cc) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x700) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xcf0) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xc7c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x4c8) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa4) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x52c) has exited with code 3 (0x3).
The program '[804] LabVIEW.exe: Native' has exited with code 3 (0x3). -
Entry point not found for js32.dll
Dear Friends,
I am trying to connect to a Domino server using NRPC (Native call based) connection. I have added Notes Client path in PATH variable (double checked this). My machine is W2k and Java version 1.4.2.
The following is the code which I am trying to run and getting erorr as,
"The procedure entry point JS_NewStringCopyN could not be located in dynamic link library js32.dll". I've use Dependency walker tool to ensure that js32.dll contains the specified function. May I know what's going wrong here?
Thanks,
Ketan
import java.util.List;
import java.util.Vector;
import lotus.domino.Database;
import lotus.domino.Document;
import lotus.domino.NotesError;
import lotus.domino.NotesException;
import lotus.domino.NotesFactory;
import lotus.domino.NotesThread;
import lotus.domino.Session;
import lotus.domino.View;
import lotus.domino.ViewEntry;
import lotus.domino.ViewEntryCollection;
public class TestNRPCConnection {
//session variable
protected Session session = null;
//database variable
protected Database dominodb = null;
* Constructor which accepts all the parameters to create a non-DIIOP domino connection
* @param serverName - name of domino server
* @param dbName - database name
* @param userIdFileName - user id file path
* @param userName -
* @param password
public TestNRPCConnection(String serverName, String dbName, String userIdFileName, String userName, String password)
try
NotesThread.sinitThread();
this.session = NotesFactory.createSession();
lotus.domino.Registration r = this.session.createRegistration();
r.switchToID(userIdFileName, password);
dominodb = session.getDatabase(serverName,dbName);
if(dominodb == null)
throw new Exception ("Couldn't create Domino Connection. Please check the parameters.");
if( dominodb.isOpen() == false)
this.close();
throw new Exception("Couldn't create Domino Connection. Please check the parameters. " +
" server=" + serverName
+ ", user=" + userName
+ ", user_ID_file=" + userIdFileName
+ ", database_path=" + dbName
+ ", password=" + ((password != null)? "<non-null>" : "<null>")
else
System.out.println("View Names are : " + dominodb.getViews());
System.out.println(" Database is Open " + dominodb.getFileName());
catch(NotesException e){
String dominoErrorText = e.text;
int dominoErrorID = e.id;
switch (dominoErrorID) {
case NotesError.NOTES_ERR_DOCNOTSAVED :
System.out.println("NotesException - . Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
break;
case NotesError.NOTES_ERR_VIEWOPEN_FAILED :
System.out.println("Could not open the specified View <viewname>. Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
break;
case NotesError.NOTES_ERR_DBNOACCESS :
System.out.println("No access to the specified Database <dbname>. Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
break;
case NotesError.NOTES_ERR_ILLEGAL_SERVER_NAME :
System.out.println("The servername specified <servername> isn't correct. Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
break;
case NotesError.NOTES_ERR_DBOPEN_FAILED :
System.out.println("Could not open specified Database <dbname>. Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
break;
case NotesError.NOTES_ERR_SSOTOKEN_EXP:
//Single Sign-on Token has expired.
System.out.println("NotesException - Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
break;
case NotesError.NOTES_ERR_SERVER_ACCESS_DENIED:
//Access denied.
System.out.println("This user is not authorized to open DIIOP connections with the Domino server. Check your DIIOP configuration. NotesException - " + dominoErrorID + " " + dominoErrorText);
break;
case NotesError.NOTES_ERR_GETIOR_FAILED:
//Could not get IOR from Domino Server.
System.out.println("Unable to open a DIIOP connection with " + serverName + ". Make sure the DIIOP and HTTP tasks are running on the Domino server, and that ports are open. NotesException - " + dominoErrorID + " " + dominoErrorText + ".");
break;
default:
//Unexpected error. Show detailed message.
System.out.println("NotesException - " + dominoErrorID + " " + dominoErrorText);
e.printStackTrace(System.out);
catch(Exception ex)
ex.printStackTrace();
System.out.println("Error while creating Domino Connection. Details - " + ex + ". Parameters are, " +
" server=" + serverName
+ ", user=" + userName
+ ", user_ID_file=" + userIdFileName
+ ", database_path=" + dbName
+ ", password=" + ((password != null)? "<non-null>" : "<null>"));
public synchronized void close()
try
this.dominodb = null;
if(session != null)
session.recycle();
session = null;
catch(Exception ex)
ex.printStackTrace();
finally
NotesThread.stermThread();
* Gets documents by the specified view name
* @param viewName - name of the domino view
* @return
public synchronized List getColumnNamesForView(String viewName)
List columnNames = new Vector();
List documentList = new Vector();
try
View view = (lotus.domino.local.View)this.dominodb.getView(viewName);
ViewEntryCollection entryCollection = view.getAllEntries();
if(entryCollection == null)
return null;
ViewEntry entry = entryCollection.getFirstEntry();
int i = -1; //counter
while (entry != null)
if (entry.isDocument())
Document doc = entry.getDocument();
i++;
//get the Column Names
if(i == 0)
List items = doc.getItems();
String name = "";
for(int k=0; ((i==0) && (k<items.size())); k++)
name = ((lotus.domino.Item)items.get(k)).getName();
//skip column names starting with $ or ($
if(name != null)
columnNames.add(name);
if(doc == null)
continue;
else
//clean up task
doc.recycle();
doc = null;
//return columnNames;
documentList.add(0, columnNames);
entry = entryCollection.getNextEntry();
}//end of while
catch(Exception e)
e.printStackTrace();
return documentList;
public static void main(String[] args){
TestNRPCConnection domino = null;
try
System.out.println("java.library.path = '" + System.getProperty("java.library.path") + "'");
domino = new TestNRPCConnection(
"testservername",
"names.nsf",
"c:/lotus/domino/data/admin.id",
"UserName/domain",
"somepassword");
System.out.println("Column Names " + domino.getColumnNamesForView("Groups"));
}catch(Exception e)
e.printStackTrace();
finally
//if(domino != null)
//domino.close();
}Hi,
Can you try with a Generic Wrapper like JNative (it contains a method to list all exported functions of a dll : even mangled ones) ?
--Marc (http://jnative.sf.net) -
Please help
Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?
-
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.
I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps.
Maybe you are looking for
-
Changing the Model Configurator in configuration scenario
Hi SapAll. i have got a tricky situation where i didnt filled the communication channel parameter in the existing Model Configurator under Connections from Component Assignment(tab) of configuration scenario m,so i just want to know on how i can ma
-
Connecting iPod touch to a WPA2 Personal Wi-Fi
When the iPod touch requests a password to connect to the network, isn't is the "passphrase" in the Linksys router security page that you must enter. i.e. The brutally long number?
-
Why is my Ipad 1 so slow?
-
Connecting to remote database without using db links
Referred Thread: Re: Remote DB connection without DB link In reference to the thread above, my question goes like this: Let's say I want to run a query from a database and use data from another database. I have the user, password, SID and port number
-
BPEL orchestration, correlation sets.
Hi, i'm a beginner, i have to coordinate those three projects: is it possible with bpel 2.0? i tried using correlation sets but bpel engine stop during the invoke in "proc.bpel". i think it happens because "proc.bpel" doesn't know where to redirect i