Filtering on a value from one request to another....

I have the following piece of SQL in a request.
Case when "test1"."fruit" = '12345' then 'Apples' else 'Pears' end
This gives me a total like the following
Apples | Pears
100 | 20
I now want to drill into the value of "Pears" so i set a Navigate on the column value and then an "Is Prompted" on the column in the new request.
When I click on "Pears" it takes me to the new request however it displays all detail e.g. (Apples & Pears).. instead of just "Pears".
Is there anyway to get it to show "Pears" only??

w00t
Welcome to the club! I have the exact same requirement as you.
This requirement is discussed in multiple threads in the forum some of which are closed successfully, but unfortunately I am unable to replicate the same solution with success. If you haven't yet come across, take a look at Re: Use a value from another report and
Re: Filter by value from another report
Please let me know if you find a solution. Thanks.
Edited by: user635102 on Sep 17, 2008 4:11 PM
Edited by: user635102 on Sep 17, 2008 4:12 PM

Similar Messages

Copying value from one cursor to another

Hi,
I have a problem while copying values from one cursor to another cursor.
The code looks like below.
PROCEDURE XYZ
            TransactionResultSet OUT NOCOPY types.ref_cursor,
IS
            temp_cursor types.ref_cursor;
            wip_rec types.ref_cursor;
BEGIN
DECLARE
                CURSOR temp_cursor IS
            SELECT ...........
END;
BEGIN
    FOR wip_rec IN temp_cursor
    LOOP
    update tinsagr set something
    where {the condition}
        IF SQL%ROWCOUNT = 0 THEN
dbms_output.put_line('this is test ');
        Fetch wip_rec into TransactionResultSet;
     END IF;
   END LOOP;so basically i want to iterate the "temp_cursor" and depending on the values i get it from here i shall update a table. Actually i want to exclude few records from "temp_cursor" and add it/copy rest of the records to "TransactionResultSet"
That means say initially " temp_cursor" has 100 records and i updated 5 records in a table and same number of records should be excluded and rest should be added to the output cursor TransactionResultSet.
How do i achieve it?
while saving i am getting
(1): PLS-00456: item 'WIP_REC' is not a cursor.
Do any one has any idea what to do in such scenario?

There are options like....
SQL> CREATE OR REPLACE TYPE emp_obj AS OBJECT (ename VARCHAR2(50), dept NUMBER);
2 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_tbl IS TABLE OF emp_obj;
2 /
Type created.
SQL> set serverou on
SP2-0158: unknown SET option "serverou"
SQL> set serverout on
SQL> DECLARE
2    rc      sys_refcursor;
3    v_ename emp.ename%TYPE;
4    v_dept emp.deptno%TYPE;
5    ---End Of Local Varriable Declaration
6    --Procedire declaration !
7    PROCEDURE TEST_CUR(pi_out_ref_cur IN OUT sys_refcursor) IS
8      emp_rec emp_tbl;
9    BEGIN
10      /* This BULK COLLECT can be done with explicit cursor,Ref Cursor
11      with some simple modification, Here I have used implicit cursor! */
12      SELECT emp_obj(ename, deptno) --Casting as the object
13      BULK COLLECT
14        INTO emp_rec
15        FROM emp
16       WHERE deptno = 10;
17
18      dbms_output.put_line('Records selected are:');
19      FOR i in 1 .. emp_rec.COUNT LOOP
20        dbms_output.put_line(emp_rec(i).ename || '--' || emp_rec(i).dept);
21      END LOOP;
22      --Now we are filtering the record and may be doing some operation with each record.
23      FOR i in 1 .. emp_rec.COUNT LOOP
24        IF emp_rec(i).ename = 'KING' THEN
25          --You can change this IF according to your need.
26          emp_rec.DELETE(i);
27        END IF;
28      END LOOP;
29      OPEN pi_out_ref_cur FOR
30        SELECT * FROM TABLE(emp_rec); --Using the TYPE AS table.
31    END TEST_CUR;
32    /* Main execution or procedure calling section*/
33 BEGIN
34    --Actual calling
35    TEST_CUR(rc);
36    dbms_output.new_line;
37    dbms_output.put_line('Now in Ref Cursor');
38    dbms_output.put_line('****************');
39    LOOP
40      FETCH rc
41        INTO v_ename, v_dept;
42      dbms_output.put_line(v_ename || '--' || v_dept);
43      EXIT WHEN rc%NOTFOUND;
44    END LOOP;
45
46 END;
47 /
Records selected are:
CLARK--10
KING--10
MILLER--10
Now in Ref Cursor
CLARK--10
MILLER--10
MILLER--10
PL/SQL procedure successfully completed.
SQL>

Pass Value from one tab to another

Hi,
I have a requirement to pass a value from one tab to another.
For ex: I have a CC&B page with two tabs (Main, Steps).
In the Main tab, I choose a Field Activity. Once it is chosen, I want to pass the value of the Field Activity ID to the 'Steps' tab. Once I get the value of the field Activity, I can then query up a table and populate some fields in the Steps tab. How can i achieve passing the value if FA Id from one tab to another?
I tried to create an extension of the page using ext_page.jsp. But this extension just provides us methods like extPreOnWindowLoad(), extPostOnWindowLoad() etc which really is not helpful.
Any suggestions?
thanks

Hi,
We cannot pass multiple values using Drill Filters beause it is based on hierarchy that can take only one value at a time.
If you want you can use Report Level Filter instead.
Neither can we pass dril filters from one tab to other.

Passing value from one jsp to another?

how to pass value from one jsp to another? i have a value assigned in the link, i want to pass that value to another jsp page?
please help with code?

Instead of the value being passed, i am getting a null value.
Here is my calendar code:
<%@page import="java.util.*,java.text.*" %>
<html>
<head>
<title>Print a month page.</title>
</head>
<body bgcolor="white">
<%
              boolean yyok = false;
              int yy = 0, mm = 0;
              String yyString = request.getParameter("year");
              if (yyString != null && yyString.length() > 0)
                  try
                      yy = Integer.parseInt(yyString);
                              yyok = true;
                   catch (NumberFormatException e)
                      out.println("Year " + yyString + " invalid" );
              Calendar c = Calendar.getInstance( );
              if (!yyok)yy = c.get(Calendar.YEAR);
                     mm = c.get(Calendar.MONTH);
%>
              <table align="center">
                  <tr>
              <td>
                   <form method=post action="calendar.jsp">
                      Enter Year : <select name="year">
<%
             for(int i= yy;i<=2010;i++)
%>
              <OPTION VALUE= <%=i%> > <%=i%> </option>
<%
%>
          </select>
                  <input type=submit value="Display">
                  </form>
                  </td>
                </tr>
<tr>
                 <table>
<%!
String[] months = {"January","February","March",
                "April","May","June",
                "July","August","September",
                "October","November", "December"
int dom[] =     {
                    31, 28, 31, 30,
                    31, 30, 31, 31,
                    30, 31, 30, 31
%>
<%
          int leadGap =0;
%>
<div id="t1" class="tip"><table border="4" cellpadding=3 cellspacing="3" width="250" align="center" bgcolor="lavender">
<tr>
<td halign="centre" colgroup span="7" style="color:#FF0000;">
</colgroup>
<tr>
<td>
<%
          GregorianCalendar calendar =null;
          for(int j=0;j<12;j++)
                    calendar = new GregorianCalendar(yy, j, 1);
              int row = 1 ;
              row = row + j;
    %>
          <table>
            <tr>
          <colgroup span="7" style="color:#FF0000;">
          </colgroup>
            </tr>
          <tr align="center">
          <th colspan=7>
              <%= months[j] %>
              <%= yy %>
          </th>
          </tr>
<tr>
<td>Sun</td><td>Mon</td><td>Tue</td><td>Wed</td><td>Thu</td><td>Fri</td><td>Sat</td>
</tr>
<%
    leadGap = calendar.get(Calendar.DAY_OF_WEEK)-1;
    int daysInMonth = dom[j];
    if ( calendar.isLeapYear( calendar.get(Calendar.YEAR) ) && j == 1)
    ++daysInMonth;
    out.print("<tr>");
    out.print(" ");
      for (int h = 0; h < leadGap; h++)
       out.print("<td>");
      out.print("</td>");
    for (int h = 1; h <= daysInMonth; h++)
      out.print("<td>");
      out.print("<a href=desc.jsp>" + h + "</a>" );
      out.print("</td>");
    if ((leadGap + h) % 7 == 0)
        out.println("</tr>");
out.println("</tr></table></div>");
if( row%3 != 0)
out.println("</td><td>");
else
out.println("</td></tr>\n<tr><td>");
%>
</html>I need to pass the value in 'h' to the desc.jsp page.
my code for desc.jsp is :
<html>
<head>
</head>
<body bgcolor="lightblue">
<form method=post action="Calenda.jsp">
<br>
<%= request.getParameter("h") %>
<h2> Description of the event <INPUT NAME="description" TYPE=TEXT SIZE=20> </h2>
<BR> <INPUT TYPE=SUBMIT VALUE="submit">
</form>
</body>
</html>But i am not able to pass the value. The 'h' value contains all the date. i want to pass only a single date, the user clicks to the other page. please help

How to get a value from one item into another

How can i get value from one item into another item.
Ex: I have a report, in there i have check boxes, and when i have checked some rows, and press submitt, a prosses computates it into a item on another page, and a branche redirects to page 3. Then i'm going to use the value in the item into a PL/SQL script in an report to show the submittet items.
How can i do this?
Computation script, pages and all that is fixed. But i dont know which PL/SQL statement to use to get th value from the item.

Hi Fredr1k,
Use the V() function from pl/sql.
e.g. V('P3_MY_ITEM')
will return the value of that page item.
As long as the pl/sql is called from within the Apex environment.
Regards
Michael

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

How to pass column name as a   values from one page to another

hi
i have created a report(pivot) from a table
SQL> SELECT * FROM T;
C1 C2          C3 D                SEQ
A   AA           2                    1
A   AB           3                    2
A   AC           2                    3
B   AB           5                    4
B   AC           6                    5
SQL> SELECT C1
2 ,NVL(MAX(CASE WHEN C2='AA' THEN C3 END),'') AA
3 ,NVL(MAX(CASE WHEN C2='AB' THEN C3 END),'') AB
4 ,NVL(MAX(CASE WHEN C2='AC' THEN C3 END),'') AC
5 ,SUM(C3) FROM T GROUP BY C1;
C1          AA         AB         AC    SUM(C3)
A            2          3          2          7
B                       5          6         11
SQL>
my requirement in Apex is like this(reverse)
eg-
when i click on cell values '2' then,it should return
C1 C2          C3 D                SEQ
A   AA           2                    1
{quote}how to pass column name as a values from one page to another
for example i have to pass 'c2' as a value to next page{quote}for report pivot you can reffer below link
Report
Amu

thanks for your reply
i 'm doing what exactly you mention here .
my problem here is
i have 15 columns
i am executing a query based on the values of the column(column name) in the target page
1)here i am passing(all) the column values to the next page-but i want to pass only one column values(column name)
when i click on any cell of that column
OR
2)i can pass all column name to target page -there(in the target page) i can filter out
i think option 1 would good if you filter out the unwanted columns
Regards
Amul

Transfer field value from one screen to another screen

hi gurus,
I am using field exit in mm02, i want to transfer field value from one screen to another screen. I am using Export, Import, Some FM like DYNP.......
but not getting the value.
can any one give idea about this.
Thanks in Advance,
Sudheer.

I THINK IN FIELD EXITS SOME RESTRICTION IS THERE YOU CAN NOT USE CALL TRANSACTION OR CALL SCREEN. I DONT KNOW WHAT IS YOUR ACTUAL REQUIREMENT. BUT YOU ARE TRYING TO CALL TRANSACTION USING MEMORY ID OR SOMETHING THEN I THINK IN FIELD EXIT YOU CAN NOT DO THAT. PLS CORRECT ME IF I AM WRONG
REGARDS
SHIBA DUTTA

Exporting and importing a field value from one screen to another in BSP

Hi All,
I am working on a BSP application which consists of multiple screens. I have to export the value corresponding to a value selected from a drop down and import it in another screen so that in the next screen values can be populated corrsponding to the value selected in the drop down in the first screen.
I tried using SET/GET parameter and also EXPORT/IMPORT so that I can get value from one screen into another screen but both the statements are not working in BSP....
Please help...
Vivek Gupta
Edited by: guptav_infy on Feb 21, 2010 11:33 AM

Hi All,
This question is still un answered. please reply ..
Vivek

Transfer value from one VI to another over a network?

Hi,
What is the best/easiest way to send a numeric value from one VI to another over a LAN. I only need one number to be sent every time the first vi is run which won't be that many, I then need to run the other VI and access that data. I could save the value to file and then open that file from the other VI, this I thought is a bit messy and wondered if LabVIEW accommodates this through property nodes etc rather than writing to file? Also by saving to file etc the reading VI needs to execute after the first one has written obviously, this could cause timing issues and to have something like a property node would be far better.
Many Thanks

Use DataSockets. The simplest, although not necessarily the fastest.
Check out the examples.
Basically, you "connect" a control on one VI (on one machine) to another control (possibly on different VI, possibly on different machine.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Re: Transferring records from one request to another.

Hi Guys,
Currently the pseudo delta is loaded with posting date selection as two months(say, may and june- 2 lakh records).
Every two months once we do full update (3 million records).
every day we delete the delta request and load data, the full load request will be available.
for some reason, i want to move few data available in the delta request to full update request. bcoz i have done changes in the routine level, which adds up new record to dso. I want to move these added records to full update request. Bcoz the delta request is deleted daily and loaded. I dont wnat my changes to be executed daily. Bcoz the changes i done in routine level takes more time to complete the dtp.
Is it possible to move selected records from one request to another? If yes, i will move the record to full update and revert the routine change. so that my data load will be faster.
Regards,
Anand

Close

Move value from one listbox to another listbox

Hi,
I have two list boxes with list of values in it. Can anyone help me to move values from one listbox to another listbox on click of a button in AWT. It will be of great help if i can get any sample code.
Thanks a lot in advance

hi,
do u want to move a specific item that is selected or all of the items?
anyway the logic is very simple!:)
if u want to transfer the currently selected itme form the first List box,
use the method getSelectedItem() to get the currently selected item.
then keep this value in a String variable (item)
and use getItemSelected() to get the Index of it in int.
keep this value in an int variable (index)
then delete the item from the first list using the method remove(index) on the first list object.
then add the item to the second list using
add(item) on the second list object.
hope u can work it out urself from here!
rgds
JP

How to move value from one tlist to another tlist in same form?

how to move value from one tlist to another tlist in same form on button press?
Same like in data block wizard when we select value from 1st list it will go to 2nd list and can be move back. Please help i am new to forms .
Regards

just call the following proc in your add & add all buttons. Reverse the code for REMOVEs
this proc will move one item at a time from list_item1 to list_item2.
PROCEDURE add_an_item
IS
v_list_count    NUMBER;
v_item1_label VARCHAR2(60);
BEGIN
IF :list_item1 IS NOT NULL THEN v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
      IF v_list_count >= 1 THEN FOR i IN 1..v_list_count
      LOOP
         IF   :list_item1    = Get_List_Element_Value('list_item1', i)
         THEN
              v_item1_label := Get_List_Element_label('list_item1', i);
              Add_List_Element('list_item2',1,v_item_label,:list_item1);
           Delete_List_Element('list_item1',i);
           Exit;
         END IF;
      END LOOP;
       END IF;
   END IF;
END;
*********************************************************************************this proc will move all items from list_item1 to list_item2.
PROCEDURE add_all_items
IS
v_list_count NUMBER;
v_item_label VARCHAR2(60);
v_item_value VARCHAR2(60);
BEGIN
v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
IF    v_list_count = 1 AND Get_List_Element_Value('list_item1', 1) IS NULL THEN NULL;
ELSIF v_list_count >= 1 THEN
       FOR i IN 1..v_list_count
       LOOP
        v_item_value := Get_List_Element_Value('list_item1', i);
        v_item_label := Get_List_Element_label('list_item1', i);
        Add_List_Element('list_item2',i,v_item_label,v_item_value);
       END LOOP;
       clear_list('list_item1');
END IF;
END;I added [ code ] tags to make this easier to read.
Message was edited by:
Jan Carlin

Pass value from one page to another

Hi All,
"How to pass the value from one Flex page to anothere Flex
page".
In First Flex page contains One Inputtext and one button is
there.After entering the data in inputtext box,the user clicks on
the button then get the data from inputtext box and then i need to
send that value to another flex page and display there.
Can u tel me plz............
Thanks & Regards,
Nagarjuna.

I believe you are thinking in terms of HTML and traditional
page coding. As an old school ColdFusion guy I understand it is
difficult to leave that behind. (at least it was for me.) Unless
you literally have two different HTML pages that each have their
own Flex app running in them you do not need to send data from one
page to the next like you would with Web Forms. (If you are doing
that you may want to simply write the data to a Shared Object, Pass
it to a server to store and then feed back into the second Flex App
when it loads or perhaps use the ExternalInterface to then pass it
through as a series of URL parameters that can be loaded into the
next Flex App.)
In Flex you do not have to worry about loosing state between
pages because there are literally no pages. Only different views.
You would not "Send" the value from one page to another. You
provide a mechanism for the second view to reference the same model
or data object (most call them ValueObjects) that the first view is
setting via the form fields.
You would want to use a ValueObject in the first VIEW and
then fill the object with the form data using setter methods on the
object. For example set the fields onChange event to call the
setter on the object and pass it the form fields value as the
property. Alternately you could bind the values of the model
directly to the fields so that they automatically obtain the data
that is being filled in.
Depending on how complex of an application you are going to
build and how scalable it must eventually be you have many
different options to choose from to allow the second View to use
the data set but the first. However to make the application
ultimately more scalable you are going to want to keep your view
separated from the controller and that separated from the
Model/ValueObject. (By seperated I mean in different classes.)
I would suggest looking up the subject of MVC in Flex and
also the Mediator Design pattern. There are many great sources of
information.
Here are a few links that may help with ideas.
http://flexblog.faratasystems.com/?p=246
http://pages.cpsc.ucalgary.ca/~heatond/mediator/
http://livedocs.adobe.com/flex/3/html/help.html?content=introbd_2.html

Filtering on a value from one request to another....

Similar Messages

Maybe you are looking for