Filtering request in Manage Data Targets

Hi,
is it possible to filter all Requests loaded in the data target (InfoCube) by some criteria (InfoSource or DataSource, Source_System...).
I would need filtering to locate all requests for delete (delete requests form one Source System / delete all request form particular InfoSource / etc.)
Thanks and regards, Tomaz

Hi,
At an infopackage level, under the tab 'data targets' there is a column titled "automatic loading of similar / identical requests from infocube". If you click on this, you will be presented with a window that will allow you to delete existing requests based on various criteria like if infosources are the same, if datasources are the same, source systems are the same etc. etc.
Check and see if this functionality meets your requirement.
Assign points if useful.
regards,
Pinaki

Similar Messages

Request status in Manage data targets

Hi
I have an ODS, which loads from a flat file. When I load data, during activation I am getting error on subsequent processing stage with status 5. What is interesting to me is, request is available for reporting icon is turned on, but I am seeing a status RED on Manage data targets. Even if I try to change manually the status to green as I am seeing the data, it didnot allow me. The error I am seeing on details tab of monitor is as shown below..
Activation of data records from ODS object ZQM_O55 terminated
System error occurred (RFC call)
Record mode Y unknown (data record REQU_3ZRQHGCF4GHOFNNP818446N3F/000001/150), activation failed
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 incorrect with status 5 in rsodsacstreq
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Eventhough it says activationt terminated with errors, how it got the icon on request for reporting option on? How to correct this issue? What am I missing. when does the record mode Y record will be created? Any help would be highly appreciated.
Thanks
Pandiri

Hi!
I had a similar problem, check your file and ods definition, maybe it is not correct.... and before you load replicate datasource and re-activate the transfer rules.....
I hope this can help you.

PSA request updated to data targets but not showing

Hi All,
It must be a basic question for BW support activities. However appreciate if someone can help me out as I am unable to find similar post.
In PSA the request shows it successfully updated to a data target but I can't see the delta request in the data target (Cube)- Manage.
This is a delta request. Can someone tell me how do I load the data back in to the cube? Do I need to delete the request from cube and run it again but I guess the deltas will be lost.
Help. pls give me all the steps in detail how do I fix this.
Thanks,
B

Hi,
There are two options.
1. at PSA find how many records are exist for your request.
Note/down load the records into excel if you have countable. As my guess delta records might be less.
Later thru repair full request you can load to PSA and then to target.
AT repair full request we need to use proper selections to load required records only.
2. PSA Request must be stored at back end table.
in that table if we can change update further status then we can do the psa request to target thru delta dtp.
Thanks

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

No of requests in a Data Target

Hi
How/Where i can see the count of Requests loaded in a Data Provider in BI 7.0
Thanks

Hi,
RSICCONT is table used to check the requests in the Data Target level ( Cube and DSO) and also if you are not able to delete the request from the data targets in PRODUCTION (Sometimes you will not have authorization for deleting Request) by going to the mentioned you can delete the request.
Regards
Ram.

Performance Tab in Manage Data Targets

Hi.
In the Performance tab of Manage Data Targets screen, under DB statistics, it's stated "10 percentage of IC data used to create statistics".
What does this mean?
Thanks,
Sai.

Hi Sai,
here is some info from SAP help:
"Specify the percentage rate of InfoCube data that is to be used for compiling statistics.
The larger the InfoCube is, the smaller the percentage rate you should select, as the system expenditure for compiling statisics increases with the increase in size."
"For up to 10 million entries in the InfoCube, you should set the percentage of InfoCube data, that is used for creating the statistics, to 100%."
Hope it helps!
Bye,
Roberto

ABAP report to read request details in data-target and delete

Hi,
Is there any abap report which I can run in background to read all request details (Request ID, Date) in a data target?
And any ABAP report which can delete a particular request?
Regards
Vikrant

Hi Vikrant,
You can check Table RSREQDONE and RSREQICODS for all details about requests.
About deletion you can try with standard function in InfoPackage when uploading.
Ciao.
Riccardo.

Displaying datas of each and evey request in the data target

Hi All,
Can we display the datas of a single request alone in the data targets such as DSO, Cube, etc.,
If yes please let me know the procedure.
Thanks in advance.
Regards
Geetha

You can do that,
for DSO - se16 -> give the change log table name of the DSO (here change log data of the dso should not be delteted)
cube - listcube -> give the request number ( here that particular request should not be compressed)
If it satisfied above conditions you can display that particular request.

Unable to delete the Requests in the data target---Process chain

Hello Gurus!
Can anyone plz help me out knowing this issue...
<b>Let me explain the whole scenario:</b>
Like when monitoring the process chains,one of the process chainhas a sequence of variants like:
load info-package1>ODS1 activation>load infopackage2-->load infopackage3..
due to some problems they scheduing it manually.all the infopackages loads data into one ODS1......suddenly info-package3 failed.
so....when i looked into the datatarget ODS1->manage->requests.
<b>i found that the info-pack1 requests status was RED.
info-pack2 requests status was YELLOW.
info-pack3 requests status was RED</b>.
ALL THE THREE R FULL UPDATES ONLY.
so suddenly one of our cologue deleted the all the three requests by making ino-pack2 requests to red.
when we r loading again the ino-pack1 again its failed.we deleted it onceagain(removing the requests from the ods),when we are trying to load ino-pack2 for some priority ,automatically the info-pack1 requests with red were seemed in the ODS.so how to solve this issue and also how to load these three ino-packs..
i hope that all understand the scenario..plz suggest me how to work on it
Thanks in advance!!!
Dilip

Hi,
Your loads are running on back ground you have to kill this porcess in SM50 or SM51 check which are all jobs are running with your user name and ALEREMOTE if jobs are running with ALEREMOTE you can check wether it is your load or some body else in SM37 so kill your jobs in SM50 or in SM51 and make request into RED of your 3 loads, delete the requests from ODS and repeat the loads it will go with out any issues, as i under stood your question when your colegue deleted the request without killing the process he simply made it to red and delete its wrong he has to kill the process and then make it to red.
Regards
Sankar

Unable to delete bad request in ODS DATA TARGET

Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.

Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya

Manage Data Targets - ORA 03114 SQL Error

Can someone help with this one.....
We have recently patched up to 24 in our BW Dev and all was well.
When I now go into cube...manage and contents. I simply want to select a few characteristics and view the data. When I choose a particular characteristic (0profit_ctr) and ask it to display, I get the following error message..
Runtime errors         DBIF_REPO_SQL_ERROR
Database error text........: "ORA-03114: not connected to ORACLE" Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "
The current status of the ORACLE instance cannot be determined. It may still be inactive or the database administrator may have restarted it . In any case, all systems that have accessed the ORACLE instance
must be restarted after the ORACLE instance has been restarted.
"DBIF_REPO_SQL_ERROR" C
"SAPLRSDRS" or "LRSDRSF04"
"FETCH_DATA_OPENSQL"
It seems to be pointing to the following line of code in LRSDRSF04...
DESCRIBE TABLE <l_t_data> LINES l_count.
which is part of this statement..
If less than 'i_pkgsize' many tuples are read
=> end-of-data is reached
    DESCRIBE TABLE <l_t_data> LINES l_count.
    IF l_count <> i_pkgsize.
      e_eof = rs_c_true.
    ENDIF.
ENDIF.
I can select other characteristics and they display OK. Reports seem to work OK. 0Profit_Ctr is active. Have emptied the cube and reloaded data. Still get the problem.
Just to confuse the issue, if I select 0Profit_ctr and 0priority together, it works (0priority is a nav attribute of 0profit_ctr)
But if I select 0project (project definition) which is also a nav attribute - it fails !
There does not seem to be any clear pattern. Some other cubes that have 0Profit_ctr have the same issue, whilst others do not !
Our Basis team have had a look and say its a 'data' problem, we will have to re-build the cubes !
Any thoughts would be appreciated.
Pete

Hi
We had the same problem. As you probably know you can define different updaterules for characteristics for separate keyfigures. For instance: for the first keyfigure get the controlling area from characteristic 0CO_AREA in the ODS and for the second keyfigure get the controlling are by a constant value 'KAD'. In our case we could solve the problem by using the same updaterules for each keyfigure and reloading the data in the cube. So maybe you can have a look at that.
Best Regards
Hans Fokker

How to Delete Requests for Master Data Target

In BW 7.0 (SP24) I'm struggling with a time dependent master data process chain load using BI 7 load methods (Transformation / DTP). The unique aspect of this is that we are required to start the process chain with an ABAP that deletes the master data. (RSDMDD_DELETE_BATCH). So a "Full" load is necessary. And we have to remove the previous PSA and Requests so that the DTP won't attempt to load (and ignore) the previous PSA.
While deleting the previous PSA request is a straightforward operation in a process chain, there does not appear to be a function allowing us to delete the requests from a Master Data object. (info cube and OSD/DSO only).
Does anyone know of an existing ABAP or Function Module that we can use to delete the existing requests from our object before we run our load processes ?
Many thanks !

Try the FM "RSDMD_DEL_MASTER_DATA".
But before deleting the master data you have to make sure that this master data is not used anywhere i.e, delete all the transactional data first.
U can also try RSDMD_DEL_PARALLELIZER

Can not update request in data target

Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
Thanks

Hi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks

The request has not yet been updated into the data targets.

Request successfully loaded into PSA - start further update
Diagnosis
The request has as data target "only PSA". It arrived there successfully.
System Response
The request has not yet been updated into the data targets.
Procedure
You can now trigger the update manually. The final target is determined in the request tables. You do not have to make any further settings.
I am getting this error daily. In RSMO screen status tab option called u201CProcess manuallyu201D, so am doing this manually daily. Is there any solution to fix this problem permanently?
Thanks & Regards,
Praveen Yagnamurthy.

Hi Praveen,
Dont you have Process chains in Production system for loading thid data. If so its better to schedule the PC rather go for manual loading. In Prod system you will not be able to change. You will have the make the changes in the Development Environment & collect these changes in a TR & then move them into Test environment first to make sure it is working fine. And then once it is tested, you can move the TR to Prod sys.
Hope it helps!
Regards,
Pavan

Records are not getting updating in to Data Targets

hai friends...
IN RSMO AFTER THAT STATUS BAR.....IN THAT --> Request successfully loaded into PSA - start further update
Diagnosis
The request has as data target "only PSA". It arrived there successfully.
System Response
The request has not yet been updated into the data targets.
Procedure
You can now trigger the update manually. The final target is determined in the request tables. You do not have to make any further settings.
TO Load data in to DATA Targets succefullly? what should i do?
ADMIN TEAM: Dont delete the thread until i get solution please...
Edited by: Bi_Madhavi on Sep 9, 2010 7:56 AM
This is very basic thing in BI. You must know about it before start working in a BI project. Please do not flood the forum with the basic questions
Edited by: Pravender on Sep 9, 2010 11:36 AM

Hi,
If you are in BI 7.0,then execute the DTP.
and If you are in BW 3.5 ,then go to psa select your request and press the button shedule."(you will get this buttton near to delete option for psa).
Thanks,
Saveen Kumar

Filtering request in Manage Data Targets

Similar Messages

Maybe you are looking for