Filtering the user selection
Hi Frns,
I have a report with dimensions and 500 measures...
D1 D2 D3 M1 M2 M3 M4...
A B C 20 10 30 40..
If end user selects M2 AND M4...
D1 D2 D3 M2 M4
A B C 10 40
Depending on the user selection (Measure value). If he don't select any column it should not be there in report.
Thanks
Riaz
Using user response function we can compare the user selected values and then hide the column the accordingly.
But its not feasible to compare 500 values (using if else) in a report.I don't think we can implement this feature in a webi report for the huge data set.
Regards,
Pranay
Similar Messages
-
How to call an action when the user selects a radiobutton
Hai
PLease help me in providing the information.
In my Project i have two radio buttons as
New
Asssessment
when the user selects new button, i want to automatically call an action in the controller(.jpf file)
Simalarly when he selects the other radio button i need to call a separate action in the controller.
Remember i dont have the submit button.
I want to dynamically call an action when the user selects the radio button.
i dont have any field inthe radio button which actually takes action as an attribute .
please provide me the necessaryHi,
You can use JavaScript to call the action in interest upon the Radio Button Element Being Selected.Should be simple, and if your controller is part of the portlet dont forget to use the jpfScopeId to asscoiate the controller instance with the one in the portlet.
Let me know if you have any further questions. -
How to avoid the user selecting a different path in my installer
Hello again all you helpful forum-goers!
I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory. My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem. However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with. I've looked, but cannot find any way to do that.
Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
Thanks in advance for any suggestions,
-JoeBen64,
That's great! Thank you so much for your quick reply. The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file. Ideally I'd prefer not to have to remember to do that every time I rebuild my installer. Is there any way that you know of to automate the process?
If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
-Joe -
Is that possible to display the user selection data in the printable page?
Hi All,
I'm going to add a printablepage button on my page.
Here comes a questions.
Is that possible to display the user selection data in the printable page?
For example,
I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
Please help.Hi Yannick,
Thanks a lot for the information. It worked.
The portlet data can be accessible using bindings, but parameter name can be different.
Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
Is this possible? If yes can you please let me know the steps?
Thanks in advance!
Somnath
Edited by: Somnath Basak on Dec 20, 2011 9:41 AM -
"File Dialog" Express VI returns the wrong path when the user selects the desktop
In labview 8.0.1 with Windows
XP, the File Dialog Express VI seems to return something other than the path
selected by the user when configured to browse for folders (or files and
folders) and the user selects the desktop.
I can't determine exactly when it works and when it fails, but it always seems
to fail if the user selects the desktop from the places bar (the shortcuts on
the left side of the dialog) or from the drop-down menu at the top of the
dialog and then clicks the "Current Folder" button to dismiss the
dialog. In this case it always returns whatever path is wired to the
"Start Path" terminal.
If the user navigates to the desktop with the "Up One Level" button
or by selecting the actual desktop directory under Documents and Settings, the
correct path is returned.
If the user selects a file before clicking the desktop icon, then clicks
"Current Folder" the correct path is returned.
If the user clicks the desktop icon, clicks open, then clicks "Current
Folder" the correct path is returned.
It's possible to work around this bug in most cases by setting the start path
to the desktop.
Has anyone seen this behavior before?
Can anybody verify this behavior by running the attached VI?
In the past, when I've reported issues like this I've received responses from
NI engineers that basically said "Thanks, but we already knew
that". Is there anywhere that users can search the list of known
bugs and avoid wasting time tracking down issues that are already understood by
NI?
Thanks,
Adam Brewster
Attachments:
File Dialog Test.vi 39 KBI'm on 8.2 and I can't get it to fail no matter how I select the desktop. I haven't tried it in 8.0, but I imagine that if this really is a bug, they did know about it and fixed it with 8.2. If this causes a real problem for you, I would suggest upgrading if you can.
-
Can I somehow let the user select multiple images from device?
Is there any way to let the user select multiple images from the device media gallery?
The CameraRoll only selects one image. And the FileRefernceList doesn't show thumbnails (so you have no idea what you are selecting).
Is there a way, or maybe some sort of workaround, for this? Is there a way to maybe "read" the users gallery on the SD-card and output your own gallery that the user can select from?
I'm developing towards both Android and iOS so cross-plattform is a must.
Thank you guys+1 to this question. I'm looking to do the same thing but haven't had any luck yet.
-
How to adjust mouse or trackpad parameters for the user selection screen?
This is not critical, but annoying. I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment. However I can not locate how to change this parameters for the welcome or user selection screen. In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click. However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
Tyrone CarrionFor the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.
-
For example, there are 10 check boxes and the user selects 5 of those boxes. Then they click a submit button. Just the information from those boxes would be displayed so they can print it. Is this possible? Any help pointing me in the right direction would be appreciated.
That is definitely possible.
Option 1: checkboxes are all named differently.
In the click event for the submit button, add some code like this...
if (cbChoice1 == "1") p2.tfChoice1.presence = "visible";
else p2.tfChoice1.presence = "hidden"; //can use "invisible" if preferred
if (cbChoice2 == "1")...
Option 2: checkboxes are named the same
In the click event for the submit button, add code like this...
var checkboxes = xfa.resolveNodes("cbChoice[*]");
var textfields = xfa.resolveNodes("p2.tfChoice[*]");
for (i=0; i<checkboxes.length; i++){
if( checkboxes.item(i).rawValue == "1") textfields.item(i).presence = "visible";
else textfields.item(i).presence = "hidden"; -
Can iBooks Author hide sections of a book to be revealed only after the user selects a correct choice?
K T wrote:
'downside'....really?
Well, yes, in the sense that simplicity has a price: it comes at the cost of reduced functionality. (If all the functionality were still there, things wouldn't be as simple; it's an inevitable trade-off.) It looks like IBA was designed with the iWeb philosophy: make simple things really simple, and leave out the stuff that's too complex to control for non-experts. The upside of course is that non-experts can use the tool really easily.
K T wrote:
No pain - no gain. You didn't come up with the content for your books without putting in fair time
Sure. But almost all that effort went towards creation of the content, not towards laying it out with IBA (which was remarkably easy). So, in that sense, IBA more than met my expectations. The things it does do, it by and large does really well, and without much expertise needed on my part. The only thing that was complex was the HTML widget, which took some programming. But that's entirely my own fault, not IBA's
Michi. -
Print parameters as per the user selection in ALV
Hi All,
We have a requriment for getting the print parametrs to print dialog as per the user selection in ALV list display.
When the user click on 'Print' button In ALV list output screen, we need to capture the print parameters from a Z table and put those on the print parameters dialog box.
I tried this , by calling the function GET_PRINT_PARAMETERS and SET_PRINT_PARAMETERS before the alv function is called. Unforutnately this is not working. Same code works for the simple list display.
Have anyone worked with this kind of requriment ?
Regards,
MithunWhat kind of ALV are you using, FM or OO?
Regards,
Rich Heilman -
How to let the user select from more then 1 data templet file to fillin a field
help i have a form the has 5 free form text fields that i need to select from a list of texts to fill it in and then allow the user to add to the data.
thanksthanks here are 2 strings
COPD continue O2 by NC/Albuterol MDI/ Atrovent MDI/ Duonebs/ Albuterol MDI/ Prednisone taper/ IV Solumedrol/ Spiva/ Advair diskus/ oximetry prn/ PT/ OT/ Coreg
CAD/ANGINA cont. O2 by NC?baby ASA/ ASA/ Lopressor/Atenolol/ Lisinopril/ Low fat diet/ PT/OT/ sublingual nitroglycerin prn/ Lasix/ Lipitor/ Zocor/ Mevacor
i would like the user to be able to select from inside of the field when it is blank (fisrt time entering data)
thanks again -
Displaying the user selection in Header for HFR
Hello Experts,
I have a prompt on a dimension in my report. The user can enter more than one values. I need to display the names of all the members selected by the user for the dimension in the header of the report. Can anyone plz throw some light on this.
Thanks,
Ravi BHi Ravi,
In text box it seems to be impossible to display the prompt members.
Only feasible option seems to be display those selected members via another grid.
But the problem here is that you cant put a grid into the header. So if your reports contain only one page then only this option might be helpful to you.
but if you have some limit on the number of members selected in the prompts then you can do it in text box also by hard coding. and nobody should select 100 memers at one go in prompts as i think. I really dont know what type of requirements you have.
Let see if your problem get solved.
Regards,
Rahul -
Exception occuring when the user select tasks tab in worklist
Hi ,
I have an issue in which when a manager selects the tasks tab for executing the workitems , it is throwing java.lang.NullPointerException: null .
can you please help me out in resolving the issue.
Thanks,
SatishHi ,
If you leave configuration is done.
There was an incorrect data in your system. To do these please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver.
After this,, there will be some incorrect workitem in approver inbox.
You need to clear that also by Tcode - SWWL. -
File open dialog to just get the user selected file name
Hi,
I am working on asynchronous file storage to KPRO through my ABAP WD application. For this asynchronous upload
operation, I just need the file name and file path(not the content). The KPRO servers could be made to use SAPFTP, SAPHTTP in the background to upload documents (triggered via tRFC's).
Is it possible to have a file open dialog (similar to java file open) which just returns the file path and file name instead of the
content? Current fileUpload UI element also loads the content which is not desired behaviour for me (because could be a performance problem with large documents uploading).
Is it possible to select multiple filenames? Thomas Jung's Flash island multiple upload works, but not in my
asynchronous scenario. Because flex fileReferenceList + upload operation works synchronously.You must remember the START-OF-SELECTION event here, after you select the file name and click F8, the START-OF-SELECTION event is triggered, but if it is not there, nothing will happen.
if sy-subrc <> 0 or l_rc < 0.
message id sy-msgid type sy-msgty number sy-msgno "mo271101
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else. "mo271101
read table l_files index 1 into h_files.
auszfile = h_files-filename.
endif.
start-of-selection. "<-- Add this
write:/ auszfile.
Regards,
RIch Heilman -
Report to show Service Requests that are open on a day selected by the user
Dunno if I'm being thick, but I can't see how to do this in a report/dashboard...
The user selects a day and the report pulls back all the Service Requests that were open on that day using the following logic...
Service Request Opened Date <= Selected date & Service Request Closed Date >= Selected date
Is this possible?You can do this with a report or a dashboard.
For a report, create a report your subject ares, like Service Request. In Step 3, Create a prompt on your date and choose Column Filter Prompt. Give the prompt a caption ("Enter/Choose Date" for example). Choose the date field for the Filter on Column. Determine how you want the users to select the value and hit OK. My experience has been that you need to let users type in the date, as opposed to choosing from a drop-down list, because of the volume of data and performance reasons, but test it to determine what works best for your needs.
For a dashboard, you would need to create a dashboard prompt for your dashboard report. You do this by creating a new report on your intended subject area, i.e. Service Request. Instead of creating the report as you normally do, you need to click on the Create Dashboard Prompt button at the top left, just below the Oracle logo. Choose the right reporting area, then complete the prompt details. Don't forget to allow for the prompt in your report.
I always recommend that you consider purchasing a great book on reporting, written by Mike Lairson. It is an excellent resource for nearly all of your reporting questions. You can find it on amazon.com.
http://www.amazon.com/Oracle-Demand-Reporting-Osborne-ORACLE/dp/0071593047/ref=sr_1_1?ie=UTF8&s=books&qid=1274893170&sr=8-1
Good Luck,
Thom
Maybe you are looking for
-
How do I open muliple raw files in ACR hosted by Photoshop?
Hi, This one is annoying the hell out of me. I used to highlight multiple raw files in Bridge and just press Enter (being the equivalent to File -> Open) and the images would all open together in one ACR interface with the filmstrip down the side.
-
The mic is not working on skype, and its not muted
Every time my sister or myself go to use Skype on the IMac, the mic does not work, we can hear the person on the other end but they can not hear us, the mic is not muted, and when you go into the sound settings the mic is on the proper setting from w
-
How to I drag and drop from Customize Add On using a Wireless Mouse on a Laptop?
I have been assisting a friend in installing Firefox. I have added Add On, but I cannot drag and drop them into the toolbars on the top. The tiny weenie add on tool bar stinks for those of us who are older and have weakened eyesight. How Can I Drap a
-
Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full., Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is ful
-
Pubmed-medline javascript stopped working last three days
greetings, i have a very weird problem with the website http://www.ncbi.nlm.nih.gov/pubmed/ which is the portal of the national library of medicine. When i put a query on the search field i.e. "diabetes" you get many pages of results. i cannot get pa