Filters and Conditons on the web report
Hello SDN,
I am working on the WAD and want to display the filters and conditions, if any, in the web report. I also want to display the selection criteria which we used on the variable screen to run the report. What is the web item used to display all these? What are the settings I need to do?
Please reply me soon...It is very urgent!!!
Thanks,
RPK.
Hi RPK,
As I mentioned in my previous post: If you put in any entry in the list of text elements, it overrides the normal setting for displaying either all generic text elements, or all filters or all variables.
As I understand, your requirement is to:
1) Display all the variables and filters on the query
2) display some of the generic text elements
Getting these two together on a single text element item is not possible as far as I know. So either you display all the generic text elements as well or else you use two different text element items.
On the first one put in individual entries for whatever generic text elements you want displayed and uncheck all other options, in the second one simple select the two checkboxes to display filter values and variable values.
Hope it helps,
Thanks & regards,
Nikhil
Similar Messages
-
Hi All,
I have a requirement to use some components called List Box and Tabs in my WebI report for presenting the information by dynamic dimension and measure selection using list box and segregate information by using Tabs as in below image.
Image was prepared in MSPaint not executable webi report.
Is it possible to integrate the list box and tabs into Report Zone in BO Webi? as show in below image?
Thanks in Advance
Muralidhar Reddy NHello Muralidhar Reddy,
The exact tool for your requirement is SAP BO Dashboard or SAP BO Design studio. WebI is a tool for ad-hoc reporting tool and we have limited functionalities to make dashboards using webI. You can have all those chart options in WebI and you can use Input controls or drill filters for restricting data. But you cannot have these selection components in reporting area. Tabs as shown in above post, you can have in bottom of the report.
find below a good example of dashboard using WebI
http://blog.davidg.com.au/2011/04/webi-as-dashboard.html
hope it helps
Regards,
Nikhil Joy -
Users able to build reports and dashboards via the Web browser
Hi All,
My requiremts is "Users able to build reports and dashboards via the Web browser and perform ad-hoc queries and analysis online via the internet" .
Requesting to kindly let us me know the procedure to get resolve the above requirement.
Thanks,
KVRHi,
Go through the links below
Designing Microsoft Excel 2007 Chart
http://charts.jorgecamoes.com/how-to-create-an-excel-dashboard/
http://dashboardspy.com/dashboards/23/designing-microsoft-excel-2007-charts
SAP BUSINESSOBJECTS DASHBOARD BUILDER
http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/dashboard-visualization/dashboard-builder/index.epx
http://www.sap.com/solutions/sapbusinessobjects/sme/reporting-dashboarding/index.epx
It may help you
Regards,
Marasa. -
Error While Run the WebI Report on SAP BW Query
Hi
I have build the universe on SAP BW Query . I built the same universe on the SAP BW DEV and SAP BW Test
When I tried to run the WEBI Report on the Universe which is built on the SAP BW Test
WebI Report is prompting for the below values
Calendar Year
Profit Center
Profit Center Hierarchy
Version.
Here I can see the List of values for the Calendar Year and Profit Center. Its giving me below error when I look for list of values for the Profit Center and Profit Center Hierarchy.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions:
1. Why I am getting this error. Because of authentication or configurations set on the Profit Center and Profit Center Hierarchy objects? If so , please let me know what I need to set?
When I tried to run the same WEBI Report on universe which build on SAP BW Dev Query. I can see list of values for the Calendar Year, Version, Profit Center, Profit Center Hierarchy.
But when I selected the values and tried to run the report. I got below error.
u2018Query 1 - P&L Structure Monthly_Devtst
Database error: [SOFA Driver] : The MDX query SELECT NON EMPTY HIERARCHIZE( {[Measures].[4CEX5LZ5571LCZHJBK0L0360P],[Measures].[4CEX5MM6Q2UPWV3VT27LU9261]} ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON COLUMNS , NON EMPTY HIERARCHIZE( { [0CALMONTH].[LEVEL00].MEMBERS } ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [ZFIGLPCBM/ZZFIGLPCBM04_Q011] SAP VARIABLES [!V000001] INCLUDING =[0PROFIT_CTR 1000HCICONS08] [!V000002] INCLUDING =2 [!V000003] INCLUDING =2008 [!V000004] INCLUDING =000 failed to execute with the error Value "0000000002" for variable "Profit Center" is invalid. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions :
1. What is this error? Please suggest the solution to run the report successfully.
Also I am attaching Print Screens of DEV and Test reports Prompts and Errors.
Here I am using Business Objects XI R2 SP4
I am sorry if I confused you with elaborated explanation, I have very less knowledge of BO and SAP BW ..
Please help me with your valuable suggestions.
Thanks,
AnithaHi Ingo,
- the BI Query in the Test system is running correct and all the variables do work ?
Yes, BI Query is working fine in the Test System and I can see all the variables too
In BI Query I can see values for Calendar Year, Version, Profit Center, Profit Center Hierarchy
- the Universe has all the variables ?
Yes, Universe has all the variables.
- do you see values in the Web Intelligence prompts when you run the report ?
No,
I can only see values for the Calendar Year & Version in the Web Intelligence Prompt.
When I try to see values for the Profit Center & Profit Center Hierarchy in the Web Intelligence Prompt, its showing below error.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
I can send you the Print Screens of Prompts & Errors, but i don't know how to attach the file here.
Thanks,
Anitha -
How to change the folder name in the web report.
hi experts,
can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
waiting for ur favourable response.
thanks
suriHi Tony,
Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
thanks
surendra -
Error (IES10901) (WIS 10901) while refreshing the Webi report
Hi Gurus,
We have created webi reports using Universe design tool on top of BEX Query based on 0SD_C03 cube and now we are facing Database error: A runtime exception has occured. (Error loading cube 0sd_c03 (catalog : % 3). (IES 10901 ) (WIS 10901) while trying to refresh the Webi report from Data Access--> Edit--> Run Query while its running fine when I refresh the report using refresh button option in Webi.
When I run the the query in rsrt its working absolutely fine.
Note that we are using BOBJ 4.0 SP7 and this issue has come recently.
Any idea or help on this would be appreciated.
Regards,
MonilHello Monali,
are you getting this error constantly or sometimes?
what type of connection are you using for your Webi report
Is it Specified user name/password OLAP connection or SSO Olap connection
If your are using Specified user name/password OLAP then try with SSO connection because SAp recommendation is not to use Specified user name/password OLAP connections..to resolve this kind of issues please restart DSL bridge..
Regards,
Naveen D -
How to disable the reminding dialog when close the webi report viewer
Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David ZhangI've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it. -
Why is my Mac storing graphics and photos from the web in iPhoto?
How can I prevent my Mac from downloading graphics and photos from the web? How do I remove the thousands of images that the Mac moved into iPhoto when I browse the web?
This has been reported a few time with no definitive cause. It probably is caused by dragging things to iPhoto. Best solution is to load the back up from just before it occurred. Otherwise you neen to use iPhoto to delete them emptying the iPhoto trash every 100 or so
LN -
Open the WebI report from Xcelsius dashboard
Hi All,
I would like to know how to open the WebI report from the xcelsius dashboard.
Looking at the previous posts I followed the following steps to implement the same but that is not working.
Inserted the component URL button and used the folowing link:
http://servername/OpenDocument/opendoc/openDocument.jsp?sType=wid&sIDType=XXX
But this is givingerre: " Internet Explorer cannot display the webpage"
Also, tried the copying the reprot link, but that is opening the Infoview login page.
I want the report to opened when we click the URL button.
Could someone please provide me a solution.
Thanks in advance.
Regards
Sindhudid you try passing the iDocID parameter? When prompted did you try to login to InfoView and check whether Report gets displayed?
Ideally the URL should be as below:
[http://<server>:<port>/OpenDocument/opendoc/openDocument.jsp?iDocID=<cuid_of_the_document>]
If you want to bypass the logon screen,you need to modify the OpenDocument.jsp to pass logon token to the above URL i.e.token=+token where the +token is being retrieved by sdk. -
I am trying the below URL to get the WEBi report from SAP BO using the Rest Webservice support that is now available.
http://{serverIP:serverPort}/biprws/raylight/v1/documents/{documentId}
I am able to get the report but as I compare the same report response when using SAOP Webservice, there seems to be a mismatch in the response. Here is what I see in the SOAP response:
</td><td c="1" ><cell ref="1.E.4t" bid="14" h="26" w="231" pad="6,7" sid="-10"><ct >Some arbitrary value</ct><value type="xs:string">Some arbitrary value</value></cell>
But when I run it through REST, I am missing the <value ..> tag:
</td><td c="1" ><cell ref="1.E.4t" bid="14" h="26" w="231" pad="6,7" bt="1" sid="-10"><ct >Some arbitrary value</ct></cell>
Apart from this right at the start of the xml response, I see some property mismatch as well.
SOAP has this property extra:
<property name="output.format.xml.valuemode">yes</property>
While REST has these property extra:
<property name="output.format.xml.option.style">1</property>
<property name="output.format.xml.styledict.fontplatform">html</property>
<property name="output.format.xml.td.bandinfo">yes</property>
<property name="source.selected">data</property>
<property name="xelement.xml.object">yes</property>
<property name="xelement.xml.object.usemap">yes</property>
<property name="xelement.xml.object.usersupportedformat">image/png</property>
I am not sure if:
the <value ...> tag miss is because of these missing/extra properties or
current REST support has some issues
For my application the value tag is a must and I can't do without this, but with REST it seems no way to obtain that.
Any help or pointer(s) in this regard is appreciated!Hello Milind,
According to our Product Owner Sam Polichouk, the solution should be available for you in 4.1 SP3, which is currently scheduled for release by the end of March 2014 (subject to change). The product team recommends that you get the raw, unformatted data values from within the Dataset specific call. This data contains a type to tell the end user what kind of data it is, so you can format it or use it properly.
The updated documentation for the SDK will be available at SAP BusinessObjects Business Intelligence platform 4.1 – SAP Help Portal Page once the Support Pack is publicly released. -
Is there any way to schedule the webi report as body of the mail
Hi All,
I have a bit different requirement. I need to schedule the webi reports to BlackBerry Mobile .
The report should be displayed not as an attachment or URL but should be the body of the mail.
Is there any Trick or Tip to do that.
Thanks in AdvanceYou could schedule the reports to run as an Excel or PDF document and the destination as a folder on a server. Then after the reports are sent to the destination, you could use the Program Job Server to run a script which parses the files line-by-line and creates an email. It's not the most elegant solution but in theory it should work.
-
How to apply Table level Break in the WEBi Report
Hi,
How we can apply the table level break in the WebI Report.
I know a bit bt i dont know its right or wrong.. Initally we normally create a table(with the values(which has 2rows(1: for naming and 2: for associating the object with it at down of it ie., one above and one below)) and at the top of that present table we will insert a "ROW ABOVE" to the naming row and then we insert a "Row below" to the object values and drag the first coloumn of the first row almost invisible(naming row) and then the same in next row(objects associating values for naming)... is this ryt.. if NO thn let meknow the various ways to do it..
Thank you in Advance....Hi,
what is your requirement. if to show subtotal then create one table and select one column and apply break.
Thanks,
Amit -
How to Generate the web reporting ?
Hi Friends,
Can you send the web reporting doc for me please.
iam also new to web reporting and i dont know
1. How to start the generation of web reports?
2. what are the elements required to do this?
3. And how to see the results of this report?
4.Is there any special cofiguration require to do this?
And i know some elements require to do web reporting.
such as WAD,Query Template,WAS.what is relation between this i dont know. i did a lot R&D on this web reporting, but i cont get the idea of this.
my system have followings,
i have WAD, Enterprise Portal, BEx. pls tell me is enough to do web report or any thing still require.
pls send me or tell me how do step by step, first what i need to do,second what i need to do......?
pls send docs to [email protected]
thanks in advance.
bye
harihi
check these links,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ec20a990-0201-0010-f291-d1d039975e41
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a249a990-0201-0010-e18e-b2f5ed135497
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc4fa990-0201-0010-588e-ca4e63050d6d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b931a890-0201-0010-268d-a7bedf8aa720
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f0aca990-0201-0010-0380-f3aac4127a57
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3541a990-0201-0010-f1ae-b24b72690df7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2642ab90-0201-0010-9193-d59de66cbab4
regards,
Manoseelan -
Can't Launch the Web Report From Reports Builder
Hi All: I just installed Oracle Reports 10g. I've used the product a lot an have never had a problem. This time when I press the "Run Web Layout" button, Reports works for several seconds and stops. THe Web page is not displayed in the Browser.
If uninstalled Reports Builder and reinstalled. I'm at a loss as to what to look for.
Any thoughts would be appreciated?
JohnI'm in exactly the same position.
Normally I just do some work, hit Ctrl+R to run it and get my output.
Now it just sits there for a while, and then the web browser trys to go to this address :
C:\Documents and Settings\hilliers\Local Settings\Temp\docroot\test report07602672.htm
which is a blank page.
I thought it was meant to run a reports servlet, but that could be just my memory.
However - I've noticed that in this report, there is no + next to Web Source in the object navigator, which I think means there is no web layout. So the report actually is running, but has no output.
Thats my guess anyway. -
Supporting BW 3.5 and BI 7.0 Web Reports in NW04s Portal
Hi All,
I have been able to identify any documentation confirming that web reports from both BW 3.5 and BI 7.0 can be supported within the same portal.
Can someone please point me to documentation supporting this solution? Or, provide me with further understanding of this model. Points will be rewarded...
Thanks!
DanaHi KJ,
Yes, I have already reviewed that blog. However, that is only discussing the interoperability of the BW 3.5 and BI 7.0 frontend tools.
I'm interested in supporting/publishing both BW 3.5 and BI 7.0 Web Reports via the portal, not building the web reports.
Thanks!
Dana
Maybe you are looking for
-
I must of reset something, but I can't figure out how to get it back?
-
ORA-00604:error occurred at recursive SQL level1 ORA-01000:maximum open cur
Dear Experts, I got Error During WebLoad Testing. Please give me solution. java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-01000: maximum open cursors exceeded
-
What is similar to BPM 10g PAPI Caching in BPM 11g?
Hi, Earlier we were using BPM 10g where for BPM workspace/Custom Worklist, PAPI caching was used. Now we are looking for using BPM 11g where HWF (Human Workflow) APIs are present instead of PAPI. Can anybody tell me that is it possible to use caching
-
Configuration Detailed Level Navigation
Hi guys, Does anyone know if it's possible to replace the words "Detailed Navigation" of the Tray's header to the name of a workset/folder that is at the 2nd-level navigation? (through configuration at portal)
-
Does Flex 2 provide a right click interface?
I have several item renderer's in a datagrid that display icons. I would like to put a list of right click options that display several actions the user can take. Is that available in Flex?