Filters and label only

I have a problem with a filter. I have 2 members :"member1" which is tagged "label only". "member2", the first child of "member1".When I define a "no access" filter to the "member2", "member2" is automatically tagged "no access". The only solution i have found is to remove the tag "label only" from "member1".Any other solution?Thanks!

Your problem appears to be due to an implied share. If a member is 'Label Only' and only has one child, Essbase makes an implied share and the label only member inherits the child's properties.I believe you can resolve this by going into the outline and setting the property for the child member to 'Never Share'.Good luck.

Similar Messages

I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08. Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08. Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

Yes. Back up the Library.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

This is complex. Until today we had one iMac with two user accounts - one for me and the other for my wife. We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us. Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd. (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
We've finally bought my wife an iPhone and set up an iCloud account for her. And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff. But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine. But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
Originally I tried a workaround by simply having her iPhone log into my iCloud account. That works great for the calendars and the contacts. But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account. And neither of us want to sync our other things to each other's iMac accounts or iPhones. Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's. So we definitely don't want this as the set-up and communications network between our devices.
We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone). Does this description make sense to you? I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work. If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
If anyone can help me set this up I'd be most appreciative! Thanks so much. Merry Christmas and Happy New Year to all readers in this community!

BobT.
I had the same problem, and decided to look into it last night.
First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing.
Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
From this point on, the 3 devices should sync contacts with each other.
This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

When downloading is complete, I can not see, run, nor access the file; it only appears in the "Downloads" window (and not the specified folder) and the only options permitted are to delete it, or to go to the download web site; what's blocking it?

My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
Why are my download files being quarantined ??? Is there a security setting option I need to change???
To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.

It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

IIR Filtering and response .vi: Butterworth filter magnitude response depends on sampling rate -why?

Hi folks,
I am not expert in filter design, only someone applying them, so please can someone help me with an explanation?
I need to filter very low-frequent signals using a buttherwoth filter 2. or 3. order as bandpass 0.1 to 10 Hz .
Very relevant amplitudes are BELOW 1 Hz, often below 0.5 Hz but there will be as well relevant amplitudes above 5 Hz to be observed.
This is fixed and prescribed for the application.
However, the sampling rate of the measurement system is not prescribed. It may be between say between 30 and 2000 Hz. This will depend on whether the same data set is used for analysing higher frequencies up to 1000 Hz of the same measurement or this is not done by the user and he chooses a lower sampling rate to reduce the file sizes, especially when measuring for longer periods of several weeks.
To compare the 2nd and 3rd order's magnitude response of the filter I used the example IIR Filtering and response .vi:
I was very astonished when I the found that the magnitude response is significantly influenced by the SAMPLING RATE I tell the signal generator in this example vi.
Can you please tell me why - and especially why the 3rd order filter will be worse for the low frequency parts below 1 Hz of the signal. I was told by people experienced with filters that the 3rd oder will distort less the amplitudes which is not at all true for my relevant frequencies below 1 Hz.
In the attached png you see 4 screenshots for 2 or 3 order and sampling rate 300 or 1000 Hz to show you the varying magnitude responses without opening labview.
THANK YOU for your ANSWERS!!!
chris
Solved!
Go to Solution.
Attachments:
butterworth-filter-differences.png ‏285 KB

Hello Lynn,
thanks for the answer. You are right that there are few points "behind" the curve in the graph, see png.
However, this is the filter response which Labview (2009) provides to me directly out of the "IIR Filter for 1 Channel. vi" in the "filter information" output cluster. Where up to now I do not know how to influence it - apart from adjusting the input parameters "IIR filter specifications". OK, I assume I have to gain more knowledge of this. The curve of the magnitude resonse dies not change when I change the number of samples of the input signal of the signal generator, only wehn I change the sampling rate.
I used directly the example vi from Labview with the name indicated in my first post "IIR Filtering and Response.vi".
So I assumed that everybody has it in his/her examples shipped with LV and it is not necessary to post it.
I just adjusted the size of the diagram of magnitude response to see the curves better as you see in the attached vi.
So I did no changes to the vital parts of signal generation and filter of the example. The screenshots are like they come from the example when using the option "one waveform" where I as user assume that this which is behind is quality-controlled by NI.
I was also astonished that the filter magnitude response is different to the one I copied out of graphs 1 year ago - but I unfortunately cannot reconstruct which example I used there...
Thanks for any further comments
chris
Attachments:
IIR Filtering and Response_CH.vi ‏55 KB
butterworth2nd_order_bandpass_0p1to10Hz_mag_response.PNG ‏18 KB

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

What's the difference between segment filtering and reduced message type

Hi gurus,
What's the difference between segment filtering and reduced message type? It seems they have the same functionality: Reduce the segment while idoc is generated.
Thanks in advance.

Hi,
BD53 is for IDoc Reduction.
this allows you to create a reduced message based upon a standard message type.If you want see mandatory fields. go to T-coe BD53 and give one standard messege type name and eg: matmas
there mandatory fields will be in Green color..
And BD56- This transaction is used to filter out segments of IDocs for combination of sender and receiver. This is usefull in scenarios where a standard IDoc with many segments is used but the receiving partner is only interested in some of the segments
the table related to this transation is TBD20
please go through below blog you have an idea abt that,
http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes
http://saptotal.com/IDoc%20Segment%20Filtering.html
regards,
ganesh.

How to keep form field and label together?

In InDesign Creative Cloud (ID CC), I need to create a 20 page form (a type of questionnaire). As a prelude to doing this, I created a one page form. I am trying to keep labels (text) and fields together, so that if I add a question in the middle of the form, everything else moves down and stays in the correct alignment and relationship. Here is what I tried.
Option 1: Anchored Fields. I created fields on a "fields" layer and labels on a "text" layer. The text layer generally had tables to help me see where fields should be placed. However, to keep fields and text in the same relationship on the page, I anchored the field to the text. Hoewever, this has the effect of moving the field object into the same layer as the text. When I tried to use the Articles panel to put the fields in correct tab order, I discovered that only fields (unanchored) that were in the forms layer could be dragged into the Articles panel; anchored fields (now in the text layer) could not be dragged into the Articles panel. Why?
I know that I could also use the Object / Interactive / Set Tabs Order command, but I wanted to use Articles to see how that works.
In this approach, I also could not figure out how to put underline the text form field
Option 2: Tabs and Character Styles. I used character styles for underlining by not using tables, but using paragraphs and tabs to align where the fields should be. I applied a character style to a right-justified tab to get the underline. However, using this option, whenever I add a new question (field + label or instruction) in the middle of the form, everything else down on the page goes out of alignment.
What recommendations do other form designers have? I have been trying to think of how IRS has "dense" or "complex" forms, and how these might be designed in InDesign CC. in order to apply similar techniques to my form design.
I am running on a Mac, OS X 10.8.4, InDesign CC.

Unless I am gravely mistaken, isnt this what you want?
for (int i = 0; i < folderList.size(); i++) {
   String folder = (String) folderList.get(i);
    System.out.println("Folder: " + folder);
    System.out.println ("Messages: " + folderMap.get (folder));
}

Issue with setting ratings and labels

Greetings all. I am having an issue with setting ratings AND labels on image files at the same time. If the script sets the label first then the rating, the label doesn't show in Bridge. If the script sets the rating first then the label, the rating doesn't show in Bridge.
Is there a workaround for this? Here is my script function for doing this. file=filename minus extension. Rating is a number for the desired rating. lab is a number for the level of Label I wish to set. Everything works great except that I can't set both Rating and Label with the script as shown. In this instance, only the Ratings will show up in Bridge after running the script. If I move the x.label=Label line under the x.rating=Rating line, then the ratings only show for those images with no label (lab=0). Any image that gets a label receives no rating.
If you're going to test this, you may want to comment out the Collections part. That's the part within the "switch(Number(Rating))" block.
function setRating(file,Rating,lab) {
    try{
        cr=File(file+"CR2");
        psd=File(file+"psd");
        jpg=File(file+"jpg");
        tif=File(file+"tif");
        switch(lab) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.created) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.created) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.created) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
                else addFile=psd;
            else addFile=cr;
        switch(Number(Rating)){
            case 0 : break; /* No Rating */
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Afew errors to start with, you were not creating a proper file as there wasn't a fullstop in the filename.
If a CR2 file didn't exist no other file was looked for, you were using "created" and should have been "exists"
This now labels and rates....
setRating("/C/Test Area/NEF/z",2,1);
function setRating(file,Rating,lab) {
    try{
        cr=File(file+".CR2");
        psd=File(file+".psd");
        jpg=File(file+".jpg");
        tif=File(file+".tif");
        switch(Number(lab)) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.exists) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.exists) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.exists) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
        switch(Number(Rating)){
            case 0 : break;
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

How do I SUM filtered column set only in FormsCentral View Responses?

Hello... When I use the FormsCentral "view responses" tab's excel spreadsheet report, I can't seem to SUBTOTAL any columns once they have been filtered!
I only see an option for adding SUM in the last row, but it calculates all of the filtered and unfiltered amounts together anyway... How can I only add up and report the amount for the filtered set selected??
Thank you! -Chris

Hi wcanerday,
Thanks for the green tick and your feedback. Yes, the SUMIF function is powerful!
When you adapt the Personal Budget template, make sure that the items in the Category Column (A) on the Budget sheet exactly match the items in the Pop-Up Menus in Column C of the Transactions sheet.
Editing a Pop-Up Menu in Numbers 3 is easy. Please call back if you need more help.
Regards,
Ian.

Transferring Email Filters and Other Settings to a New BB Device

I will be upgrading/replacing the BB device of one of my users. He's got a lot of email filters and personal setting preferences (i.e. ring tones, speed dial,etc.) Can I transfer the settings and filters to his new BB?
I tried transferring it through the BB Desktop Mgr > Device Switch Wizard but it messed up the Messages/Corporate Email. After syncing the device with the BES he got double copy of the emails that are currently in his Inbox.
Thanks in advance!
Solved!
Go to Solution.

You can do a Backup of the old, and then a selective restore from the backup to the new device...
DM > Backup/Restore > Advanced.
Select only those preference databases you desire (i.e., Address Book preferences, Speed Dial, etc.).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I play Reverse between label A and label B

hi again~
I have a symbol，some timaline and labels in it.
so now I want to play reverse between the Label A and Lable B
but the action syntax is like
test1_play.playReverse();
so how can I play reverse rom LableB to LableA?
I found this information, I am fresh in edge animate, so I can't figure out the issue.
anybody help?
sym.playReverse ( position, executeTriggers )
position defaults to the current playhead position (which defaults to 0); If play is issued and the playhead is at the end of the timeline, play from the end.
executeTriggers can be true, false, or null and indicates whether triggers at the starting position are fired:
true - all triggers at the starting position are fired.
false - no triggers are fired at the start point.
null, undefined or omitted - triggers are fired at the starting position only if the timeline is being played for the first time, or if the starting position is different than the current playhead position as returned by getPosition().
Description: Play the default timeline in reverse from the given position given in milliseconds (if position is a number) or as a label (if position is a string).

Hi again
See that thread (you'll find a downloadable example) : http://forums.adobe.com/message/5347434#5347434
Gil

11g: How to show vertical gridlines and ticks only on full hours?

Hi,
continuation of read-only preview thread dvt:graph How to show major ticks on X-axis only for full hours?
Katarina, I tried your suggestions with mixed success.
Here my starting code:
<dvt:graph binding="#{backing_lmrg0001.graph11}"
                                 id="graph11" imageFormat="FLASH"
                                 value="#{bindings.VwLmrgWerteGrafik.graphModel}"
                                 dynamicResize="DYNAMIC_SIZE"
                                 graphType="BAR_VERT_STACK2Y"
                                 inlineStyle="width:100%; height:50%;"
                                 noDataErrorText="#{bundle.NO_DATA_AVAILABLE_TEXT}"
                                 partialTriggers="::commandButtonCreateGraphic ::pollRefreshData"
                                 imageHeight="200"
                                 continuousTimeAxisInterval="CTAI_HOUR">
                        <dvt:referenceObjectSet>
                          <dvt:referenceObject lineValue="#{backing_lmrg0001.grenzwertAcetat}"
                                               index="0"
                                               displayedInLegend="true"
                                               text="#{bundle.GRAPH_THRESHOLD_ACETAT_LABEL}"
                                               series="0" color="#ff0000"
                                               lineWidth="2"
                                               location="RO_FRONT"/>
                        </dvt:referenceObjectSet>
                        <dvt:seriesSet defaultAssignedToY2="DY2_AUTO_ASSIGN">
                          <dvt:series color="#0052ff"
                                      markerType="MT_STEPPED_LINE" lineWidth="2"
                                      assignedToY2="false"/>
                          <dvt:series assignedToY2="true" lineWidth="10"
                                      markerType="MT_AREA" color="#e7e700"/>
                          <dvt:series color="#94f700" markerType="MT_AREA"
                                      lineWidth="10" assignedToY2="true"/>
                        </dvt:seriesSet>
                        <dvt:y2Axis majorTickStep="1.0"
                                    majorTickStepAutomatic="false"/>
                        <dvt:o1Axis/>
                        <dvt:o1MajorTick tickStyle="GS_GRID"
                                         lineColor="#00ff00"/>
                      </dvt:graph>The x-axis contains date values with a grid of 5 minutes over 12 hours.
The code above shows vertical gridline only at 00:00 o'clock.
The tick label displays every half hour (format HH24:MI) --> continuousTimeAxisInterval="CTAI_HOUR" seems to have no effect.
Then I changed timeAxisType from "TAT_DEFAULT" to "TAT_DEFAULT_STRICT".
Juhu, now vertical gridlines are displayed every half hour, but orientation of tick label changed from vertical to horicontal (format DD.MM.YYYY)!
--> Why????
Then I added following code:
<dvt:o1TickLabel automaticRotation="AR_NO_ROTATE"
                                         tickLabelSkipMode="TLS_MANUAL"
                                         tickLabelSkipCount="12"/>This changes the orientation of x-axis tick labels to horicontal AND tickLabelSkipCount has the correct effect ! (which is wrong when using timeAxisType=TAT_DEFAULT_STRICT)
Problem now is that format of tick labels is DD.MM.YYYY and not HH24:MI.
I tried following but with no success:
<dvt:timeAxisDateFormat dayFormat="NONE"
                                                monthFormat="NONE"
                                                quarterFormat="NONE"
                                                yearFormat="NONE"
                                                timeFormat="HOUR24_MINUTE"/>This keeps following questions open for me:
1) Why does tick label orientation and format changes if timeAxisType changes from "TAT_DEFAULT" to "TAT_DEFAULT_STRICT"?
2) How to change tick label format to HH24:MI, if timeAxisType=TAT_DEFAULT_STRICT?
3) continuousTimeAxisInterval="CTAI_HOUR" doesn't solve my problem to show tick labels only for full hours.
regards
Peter

Hi,
Bug 7503358 has been opened for the problem of the missing vertical gridlines.
regards
Peter

JSlider - Showing the labels only at the major tick points

Hi
I am using a vertical JSlider and I have the options to change the maximum and minimum values of the slider.
The problem is that when the difference between minimum and maximum values are very high, a number of labels are displayed. As this difference increases, these labels will be overlapped and the labels become unreadable.
I need to restrict the number of labels only to the major tick marks of the JSlider. Can anybody suggest a solution to show the tick labels only at the major tick points ??
Thanks in advance.
Regards
Anoop

You can show slider labels at whatever values you choose by using setLabelTable. Example:slider = new JSlider(); // default range, 0 - 100
Hashtable<Integer, Component> labelTable = new Hashtable<Integer, Component>();
labelTable.put(0, new JLabel("Zero"));
labelTable.put(25, new JLabel("25"));
labelTable.put(50, new JLabel("50"));
labelTable.put(100, new JLabel("100!"));
slider.setLabelTable(labelTable);
slider.setPaintLabels(true);db

How do I rate and label files in Bridge CS6?

Fulltime student and a new cloud member. Having problems with first project. I can't nor can the instructor figure out why I'm not able to rate and label files in Bridge CS6.

No clue why I didn't think about this.
Isn't that why we are here?...
But serious, I understand your wish for a big preview but not your wish for clicking, never been a fan of RSI myself
It is a long standing issue rating and labeling are not the same in all circumstances but clicking in the preview window might be a difficult wish to fulfill. There are many ways to use Bridge but if you like big previews consider this:
In the Bridge prefs advance tab select 'generate monitor sized previews' (this should create good full screen previews)
Then either select a bunch of files in the content window you want to judge or just start at the first file.
Hit space bar and full screen preview starts showing (when all files have been cached it should take very less time or real time to show good previews.
With arrow keys cycle through the files and with cmd + . or cmd + , (comma, I now realize I had it wrong in the other post) to increase or decrease ratings. All the keys are adjustable with only one hand and very close to each other. And clicking on a spot does show a 100 % preview of that part.
But as said before, so many users, so many workflows

Filters and label only

Similar Messages

Maybe you are looking for