Filters gone after using "breaking apart" command

Hi there,
I spent quite a bit of time enhancing my video with filters. Then I used the "Break apart" command (Cmd-Shift-G) on some clips in order to be able to work on the audio tracks separately on those clips. Strangely those clips seem to have lost their video filters! I think this is terrible. Any advice? TY.
André Vanasse

Permanetly gone I'm afraid.... I learned the hard way too. When you break apart a compound clip, you are basically destroying it, not just "opening" it up. you have to double click it to "dive in" to the clip. I realize theres times when this isn't a good enough solution, only work around I have is to copy the clip before you destroy it, make your changes, then remake a compound clip and then "Paste Effects" this kinda does what your looking for. good luck!

Similar Messages

After using a voice command your volume goes way up

After using siri (which isnt working right now) or any voice command thing my volume goes way up for a second then goes back to normal but just recently its been staying really loud. Anybody else having this issue?

iPhone User Guide
Voice Over Fix
Settings > General > Accessibility > Voice Over > Off
Or
Press the Home Button 3 Times
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Where have the CS2 filters gone after leopard upgrade?

I have CS2 on a Powerbook G4 1.5Ghz operating on Leopard 10.5.7. The Powerbook was previously my brothers so I inherited all the software on it. CS2 was reinstalled after a recent upgrade from Tiger to Leopard.
Since then, I have had only 5 filter options in Photoshop - Blur, Noise, Pixelate, Sharp and Stylize.
I have searched everywhere for the files on the system, in case they were accidently moved, despite the fact I never mess around with the system folders.
I have been able to add plugins by placing them in MacintoshHD> Adobe> Plugins> CS2> File Formats. The plugin then appears in Photoshop.
Also, I noticed that when I go to Applications> Adobe creative suite> Adobe Photoshop CS2, there is no "plugins" file (like there is for Illustrator outline the filter options).
Im really missing the basic filters I used to have especially the halftone and its options.
I have searched this forum and notice someone had the same problem, but the suggested solutions have not helped me. I neither have a backup copy of CS2 or the original disk. The CS2 software is an educational package (from UCLA).
Would anyone have any advice on how I can get the basic filters back?
Many thanks!

Well excuse me sir for having a hand-me-down-mac.
Call the FBI!
You should not be so quick with your accusations.
FYI, my family had 2macs. One with CS, the other with CS2. Both macs were upgraded to Leopard, then the computers were swapped around as I preferenced Photoshop CS2. Adobe have never mentioned anything about "pirated software" - in fact were most helpful when I rang them and they re-activated CS2 - consider your statement as "idiotic".
I should report you for abuse.

Receive location of job after using Start-job command

Hey all so I have a script that installs software on remote machines. I've recently started using Psexec to start installing as the System account, however now I am not able to keep track of the location that Psexec is running on. The old method I could
call the variable I stored the job in "$job.location" and receive the location but now when I do this I get localhost.
Here's the code:
###Software Install methods
if($checkboxUserInstall.Checked){
#Uses users creds to install software
foreach($item in $computersForInstall){
$installArrayJobs += Invoke-Command -ComputerName $item -ScriptBlock {cmd /c "C:\Package\$($args[0])"} -ArgumentList $softwareInstallerName -AsJob -Credential $cred
}else{
#New PsExec Install method
$installString = { PsExec.exe "\\$($args[0])" -s -accepteula "C:\Package\$($args[1])" }
Write-Host "Starting $($software[$index][0]) Installs.."
foreach($item in $computersForInstall){
$installArrayJobs += Start-Job $installString -ArgumentList $item, $softwareInstallerName
I think I understand why, the top invoke command is actually invoking that command on the remote machine so it is able to keep track of the location. The bottom is using Psexec to invoke the command and cannot keep track of it.
So long story short is there anyway I can keep track of the location while using the bottom Psexec method and the Start-Job command?
Thanks.

You can leverage the -Name property of Start-Job to keep track of the server the job was for.
###Software Install methods
if($checkboxUserInstall.Checked){
#Uses users creds to install software
foreach($item in $computersForInstall){
$installArrayJobs += Invoke-Command -ComputerName $item -ScriptBlock {cmd /c "C:\Package\$($args[0])"} -ArgumentList $softwareInstallerName -AsJob -Credential $cred
}else{
#New PsExec Install method
$installString = { PsExec.exe "\\$($args[0])" -s -accepteula "C:\Package\$($args[1])" }
Write-Host "Starting $($software[$index][0]) Installs.."
foreach($item in $computersForInstall){
$installArrayJobs += Start-Job $installString -Name $item -ArgumentList $item, $softwareInstallerName
Now, instead of the default Job1, Job2, etc. job names, each job will have a name that matches the server the job was for.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Permissions on /Applications folder after using copy items command in ARD

Hello!
I've used ARD to copy Applications on client machines. Copying works fine, but I've discovered permissions are wrong even I checked the Set item ownership to: Inherit from destination folder.
For example I copied the Google's Adnroid SDK bundle to client machines:
drwxr-x--- 4 admin admin 136 20 Mar 00:48 adt-bundle-mac-x86_64-20130219
So, no others have no access at all to the folder. I tried to fix it using the Get Info in Finder, but now the application won't even launch on standard user privileges - this may be caused by Gatekeeper.
How do I give the correct access rights?
I assume using the Get Info on Applications folder to Apply to enclosed items is not a good idea?

Hi Lisa!
You must be very specific with your paths: users/teachers/sites does not equal /Users/teachers/sites does not equal /Users/teachers/Sites. Pay attention to capitalization and prefex your paths with a slash to specify the startup disk.
If you must specify a path with a space in the name then escape characters won't be necessary. You can simply use _*/Applications/Folder with spaces in name*_.
Hope this helps!
bill

Is it possible to keep a movieclips filter/tint changes after breaking apart?

I already know the answer is no, but I think that could be something the developers can work on for a future version. I'm currently working on combining a bunch of movieclips with variating color schemes that I'd like to condense into a unified pallete. Breaking apart a movieclip reverts the graphics to the original colors but it would be super-helpful if flash repasted the current color settings onto the graphics once its broken apart. Maybe implementing a few of illustrators color palette tools would be great too. If this isn't the proper place, then I apologize but I wanted to pass the info along as an artist who is currently using flash as his primary art development tool right now.

I'm here, Ned. And Yes, the wishlist is the best place to post any enhancement request for further review.
This is a wonderful request and will need careful planning due to several factors. The first issue I see is filter being specific to movieclip only so it can not be applied to a graphic symbol. The second is that if we are to reapply the filter and other effects to the symbol after break apart, what happen if the inner symbol already have this effect at a different value. Lots of things to consider and think about in the design as well as engineering of this request.
Quynh
Flash Pro, QE

After using shift command 4 and send to desktop,how can I had iphoto to the list "open With" to preview menu?

After using shift command 4 to send a photo to the desktop, how can I add iphoto to the list of"open with" menu ?

All that's doing is forcing iPhoto to import the image. Dragging it to the iPhoto icon will do the same, or create an automator action and save it as a Contextual menu item.
Regards
TD

Does Editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

Does editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

C5ELEN wrote:
. Didn't we have that in 7? Seems like I remember we could set the number of undo levels.
Legacy FCP has Revert Project to return to the last saved version, and it has Restore Project to go back to one of the autosaved versions. The maximum number of undo's can be set in user preferences. A lot different than X.
Russ

Quality of Image after Break apart

When breaking apart an image, there is sort of a 'residue'
attached to some parts where the image has connected.
Problem is explained with a picture below.
Picture
The image was imported from a Photoshop CS3 document which
can be found here for you reference.
Link
As you can see in the PSD there is no 'residue'.
Thanks in advance for any help anyone can offer.
- Doc

Hi,
How did you import your image into Flash. Some times this
happened in the crossed sections of the PDS layers, try to expert
your layers from photoshop as PNGs.

Problem after break apart a picture

Hi,
Now my turn, facing problem
This is my 1st question here, hope some one can answer it.
I import a picture (any format),
break apart (Ctrl B)
slice to pieces (draw lines across or select rectangular
area)
convert each slice to symbol (graphic or movieclip)
publish to swf.
Now the problem is,
in fla, picture still looked fine,
but in swf, it gets wrong.
I've upload my files
http://www.ggshow.net/files/bitmap.swf
http://www.ggshow.net/files/bitmap.fla
Can see my problem?
Thanks for any help...

ggshow wrote:
> Hi,
>
> Now my turn, facing problem
> This is my 1st question here, hope some one can answer
it.
>
> I import a picture (any format),
> break apart (Ctrl B)
> slice to pieces (draw lines across or select rectangular
area)
> convert each slice to symbol (graphic or movieclip)
> publish to swf.
>
> Now the problem is,
> in fla, picture still looked fine,
> but in swf, it gets wrong.
>
> I've upload my files
>
http://www.ggshow.net/files/bitmap.swf
>
http://www.ggshow.net/files/bitmap.fla
Flash has that sometimes when comes to bitmaps handling.
Make sure the content is on even pixels X=10 and Y123 not
123.2
Also, you may want to rethink the approach. Perhaps import
separate images to flash rather than one whole one and cut
it.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Fields disappear after using the Reduce size save in X pro

My many form fields literally are gone after doing a save as>Reduce File Size command in the new Acrobat X Pro.
I have many pages that I have anywhere from 30 to 50 interactive fields to fill in, I had tested the forms closed the file reopened and then because the file size was a bit more than I have seen in the earlier version of Acrobat, so I used the Save as>Reduce file size command on all my pages after seeing in the folder that my interactives went from 1050 KB to around 500, so I did every form one after the other.
Well when I went to start loading them in to FTP and testing them after placing on the web when clicking on the PDF it has no fillable fileds, well I thought what, so I opened that same file on my computer and nit came up the same, and the last thing I had done before starting to upload was to do the Reduce File Size command.
To have all my fields wiped out like this is crazy, I have no way to recover them from what I can tell, unless Adobe has a miracle fix, which I'm hoping.
I can't find any setting that says it removes form fields upon save!
Can somone tell me what has happened and maybe why, I have doing these type forms for years and have never had this happen, I'm Wary of this new Acrobat, I can't see the old history menu, where you could see pdf's that you created a month ago or more. Why does that screen stay on in the center of the program all the time, most of those have a close box that you can get rid of it. Is there a way to turn on the old 9.0 menus everywhere, and can you move the right side column to the left side somewhere, it just is easier for me to use.
Things seemed to work relatively good in the old version, why some many drastic changes, it ends up slowing my production down, and now i'm behind on my work load.
I'm all for improvments, but really why change everything, it seems counter productive even for Adobe, unless someone is trying to justify their employment.
I apologize really frustrated here.
Any help to recover would be great.

Thank you LoriAUC, it was definitely the Reduce File Size command. Although I have used the Optimizer in the past in older versions of Acrobat I did not use it in this case.
I have been doing this exact same work with Acrobat from the days of Live Cycle or what ever it was called, and just a few weeks ago I was creating the same interactive's using the same files for a different client, using the Acrobat 9 pro I believe in the built in "Forms" builder.
I think where I may have screwed up is I had always done my Reduce File Size before I made the form interactive, this time I happened to see that each page was over 1 MB and I know that the non-interactive version that I also post on our website is more like 200 KB, so when I saw that they were over 1 MB, I decided that I was going to use the Reduce File Size after I had finished all of my 13 pages of interactive's.
I did not think to check the first one to see that the interactive was still functional, and proceeded to change all of them by quickly opening doing the save as reduce file size and then closing, and it took a whole 3 minutes to undue/ ruin the hours of building the pages with the 30 to 50 field areas that were interactive.
I don't wish to replicate it right now, but I will attempt a test with some made up test files to verify when the deleting of the fields took place, because there was data in the fields, but it was now flat and when you click on the edit in forms, it asks if you want to have the wizard place fields because no fields are in the document, or something to that effect.
I will let you know the outcome of my experiment.
If you come up with any other info I would be very interested.
Thanks again for the help.
Sincerely,
Omnia Guy

Space after Page Break

Hi All,
i have created a smartform and i use page break for my requirement now my question is in second page it leave some space and after that dispaying the line item how to remove that space or how display the line item in first with out any space
Thanks
Surendra

Hi,
Create the second page
In that resize the main window size according to your requirement
At page break -create command window give the next page as second page
Let me know if any concerns...

LR V1.2 Having problems using the find Command

Have just recently started using lightroom and so far managing most applications imported a series of photos and after import added keywords to them using the find function I cannot get images to appear. What seems to happen is that in the keyword tag and the folders any of the headings that contain the keyword become active the remainder show a zero no in number of images held in that folder but no images on screen
can anyone assist me
Peter

thanks for the reply
have switched of global filters, made sure that using the Find command have set keywords in "text box" and in the "rule box "contains". When I then enter a key word as soon as a type the first two or three letters
a message appears on the screen no "No photos in the selected keyword Tag" Also when you look at the folders which have a series of numbers indicating the photos in the directory the first number in each set turns to 0 with the exception of the folder and sub folder were the images are
So have not managed to make any progress
Peter

Menu entry under 'Tools' for connecting Bridge with Photoshop gone after deleting preferences

Hi, after I had problems with Photoshop HDR-Pro dialog not coming up, I deleted the preferences of both Brodge and Photoshop. Now HDR-Pro is working again, but just from inside Photoshop, not from Bridge. I don't see the menu entries under Tools to batch pictures in Photoshop. The tick in Bridge -> prefs -> start scripts -> auto collection cs5 is set. Actually I de-selected and selected, deleted prefs 3 times, it's still set now, but the menu doesn't show.
The first time I deleted Bridge's prefs, the Illustrator menu was gone as well. After deleting the prefs again, de-selecting and selecting the Illustrator bits in the start scripts, it's showing again. Only Photoshop is still missing. I read this article
http://forums.adobe.com/message/3941856#3941856
but it didn't help - the start scripts are set correctly in Bridge's preferences, and I've deleted the prefs several times now.
Can anyone help?
The versions:
Bridge 4.1.0.54
Photoshop 12.1 x64
Thanks in advance
Dagmar

The first time I deleted Bridge's prefs, the Illustrator menu was gone as well. After deleting the prefs again, de-selecting and selecting the Illustrator bits in the start scripts, it's showing again. Only Photoshop is still missing. I read this article
Don't know what you mean with deleting prefs, did you use the option key to reset the preferences? or do you mean deleting the Bridge plist file from the user library preference folder.
And in PS the same, did you use the key commands for refreshing preferences?
I understand that you have CS5.5 and it did work before? Also do system maintenance with check and repair disk permissions, (use Apple Disk Utility for this).

Applying photoshop filters in After effects layers!

Hi. Is it possible applying those photoshop filters into After effects layers? I thought the filter worked like layers, so when I import the photoshop files to AE I could drag the filter and apply it on a movie layer! I didn't work! Is it possible? thks!
PS: I'm using Production premium CS5.5!

Well, I'm reading the book ADOBE AFTER EFFECTS CS5 CLASSROOM IN A BOOK; chapter 6 (animating layers): it's about importing PSD files to After effects compositions! I was thinking about creating scenarios to a movie using PSD files. When I apply a layer style to a picture in Photoshop CS5, save this picture, and import this picture to AE it comes likes 2 files: a composition ( picture + layer stile) and a picture without the layer style. I'm gonna use the very same words of the book.
Though layer styles are referred to as effects in Photoshop, they behave more like blending modes in AE...Another diference is that each layer style blends directly with the underlying layers in the composition, whereas an effect is rendered on the layer to which it's applied, the result of which then interacts with the underlying layers as a whole!
Well, I have tried to apply a layer style on a movie file of my composition but it doesn't work cuz the layer style doesn't come alone, it comes with the picture!
So I have figured the following possibility! Take a look in this!
http://2.bp.blogspot.com/-T5L62G9WLio/UALdatCbrmI/AAAAAAAAAyI/7hQJK_drigg/s1600/Screen19.j pg
What if I apply a filter in this shot. Will the filter be applied only on the statue or it would be applied on the checkerboard background too? If the second possibility is possible I could apply this image above a movie and use the filter on it, couldn't I? After all the checkerboard background is transparent! Got it?

Filters gone after using "breaking apart" command

Similar Messages

Maybe you are looking for