Filters not in Layer Tab

When I apply filters to an object in a selected layer the filter is applied, but it does not appear in the layers tab. The little filter icon appears, but the filter does not show up below the layer it is applied to. If I add a behavior, the behavior shows up. However, if I go to the timeline, the behavior appears below the applicable layer in the hierarchy. Any ideas as to why only filters do not show up in the layer tab? Thanks in advance for the help.

At the bottom of the Layers tab are three little buttons that toggle the visibility of masks, filters, and behaviors. You probably have filters toggled off.

Similar Messages

  • Filters Disappeared in Layer Tab

    This is odd. Some filters have disappeared from their associated object. I put a FADE IN/OUT on an object -- and it works -- but the FADE does not appear below the object, so I can't adjust it. Did I hit some button and turn something off? I feel like I need to reset the panel, like the way you can reset the sound panel in FCP.
    Thanks.

    Lower right hand corner of the Layers palette - click on the little gear - that controls the display/hiding of your behaviors...
    Patrick

  • In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

    In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

    Ok no one has been able to help me so far this is it. I NEVER had these problems with photoshop CS6 extended edition!
    The best i can do to describe the dissappearing filters( from iteratrions of Photoshop CC for the last year to now) and pattern overlays were called marble, stones and concretes. where can aI find a list of pattern overlays?
    will it do any good to repost to all on this forum?

  • Change Layer Tab Width (might be willing to pay)

    Hi,
    I'm trying out the cs4 demo (I was using cs2 prior) and while I like the new customizability options for the UI I have one issue with it. In cs2 the layer tab was a lot smaller. In cs4 it's quite a bit wider. It's 65px wider in cs4 using medium text size. I narrowed the problem to the 'Blending Mode' drop down box. There is a lot of empty white space to the right of text. See screenshot.
    http://www.inspiredvisuals.com/test/tabwidth.jpg
    Can Photoshop be configured somehow to change this drop downbox to a smaller width or maybe allow the windows to shrink to a smaller width size? Is there an ini file that could be configured? In After Effects this is possible. While this may not be possible to do via scripting I'm sure its technically very easy to do
    I know this sounds picky but every pixel available to workspace is important. I might be willing to pay if someone can help me out with this.
    Thanks in advance.

    I have it set to medium. Even when I set it to small the layer menu is still quite a bit wider then it was in cs2.
    Theres definitely a way to do this... but it might require modification of some of the core files of photoshop?
    possible solutions?
    - scripting
    - create a custom layer tab with scripting
    - modifying core files to either allow the tabs to be shrinked down further much like you can in After effects(part of the box just becomes invisible if it's too small.) or change the actual width of the "blending modes" drop down box.

  • Using tab groups but Firefox 28.0 crashes and even can not save all tabs in archive recently

    Hi. I installed tab groups addon on my firefox 28.0 (firefox portable version) and each group has its tabs. of course. Problem is that Firefox crashes when i work on a group with the tabs and even can not save all tabs in archive as MAFF recently too. When i try to save all tabs in archive as... i choose the name and hit save and wait but after some time this crashes too. Last time i saved all my tabs and groups as MAFF or other file was end of april and since then i can not save them anymore because of the crashing.
    I read on the help site to delete Firefox then reinstall ect. to fix problems but I DO NOT want to erase my groups with their tabs as i chose this solution working with group tabs as it would be to hard on my cpu when i use for each group a different browser for example.
    Please help me fix this problem with the crashes but without loosing my groups and its tabs as they are all important and do not wish to erase them as i use them all.
    Thanks and hope for a soon reply :)

    Can you give me your crash reports?
    #Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
    #Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.

  • Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

    Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
    There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
    Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
    Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

    as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

  • I can not open new tabe in the same page

    i can not open new tabe im the same page
    when i click on new tabe , it donsnt open at all

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • When I open up my hotmail, it opens a new session and not a new tab. Why?

    After I launch your program with MSN as my home page, I then click on hotmail to open up my emails. When I complete the log-in, a new Firefox session opens for my emails and not a new tab like it has done in the past. This has been happening for the past two to three months. What caused this change?

    Check the [[Options window - Tabs panel]] and make sure the setting "Open new windows in a new tab instead" has been selected.
    There are also quite a few tabbed browsing add-ons that give you greater control over tabbed browsing, and can force all new windows to open in a tab. Some examples are:
    * [https://addons.mozilla.org/en-US/firefox/addon/1122/ Tab Mix Plu]
    * [https://addons.mozilla.org/en-US/firefox/addon/14439/ Tabberwocky]
    * [https://addons.mozilla.org/en-US/firefox/addon/59961/ Tab Utilities]
    * [https://addons.mozilla.org/en-US/firefox/addon/13288/ Super Tab Mode]

  • Firefox does not save my tabs or sessions when I shut down my computer

    To be more clear:
    Yes, I have set my options to "show windows and tabs from last time".
    No, I did not check "clear memory on shut down" or "start private session"
    Also, it saves my tabs when I restart the browser, but when I shut down my computer and start up again, Firefox does not show my tabs from last time. The same thing happens with sites I've logged onto before; it logs me out after I shut down my computer.

    Did you check the "Clear Recent History" settings to be sure cthat you do not clear the Browser history and the cookies?
    See [[Clear Recent History]]

  • HT4993 I want to set up a personal hotspot, but when I go to cellular settings on my phone, i do not find a tab that says "personal hotspot".  How do I do this?

    Ho do I st up a personal hotspot?  In my cellular settings, I do not find a tab that reads "personal hotspot".

    http://support.apple.com/kb/HT4517
    you need to be provisioned by your phone carrier to use hotspot.  so give them a call.

  • Custom field in 'Notes and Attachment" tab of shopping cart

    Hi All,
    I am working in SRM 7.0 classic scenario and i have requirement in which i need to add custom field in 'Notes and Attachment" tab of the shopping cart portal.
    I have added those fields in structure --- INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC.
    Also implemented the BBP_DOC_CHANGE_BADI in while i am populating the custom field value.
    I have created custom field as INPUT FIELD in webdynpro component /SAPSRM/WDC_DODC_NA and view : V_DODC_MAIN_VIEW.
    Now I can see the custom field value in table BBP_PDISC, but i am not getting the value in Shopping cart "Notes and Attachments" tab.( I am able to see the field but not the value of it).
    The value is getting populated in ITEM DATA tab instead.
    Please suggest if i am missing anything in the process and how to achieve this.
    Thank you in advance.
    Thanks,
    Satheesh

    Hi,
    You have done everything.. well.. except that you did not set the attribute of the input field to this value.
    When you have value u just need to bind it using set_attribute method of the element.
    Use  ctr+f7 to generate the wizard .. select in set mode.. click on context and select the attribute that you have created in the context.
    Hope this helps.
    Regards,
    Vinay

  • How different of PDF downloning with open in new Tab or not Open new Tab

    How different of PDF downloning with open in new Tab or not Open new Tab?
    My web site distributes PDF files,
    and user can download the PDF files in my site.
    The problem is I wanna show PDF that download in new tab,
    but pdf only downloaded, not open new tab.
    How to open new tab by downloading a PDF

    How different of PDF downloning with open in new Tab or not Open new Tab?
    My web site distributes PDF files,
    and user can download the PDF files in my site.
    The problem is I wanna show PDF that download in new tab,
    but pdf only downloaded, not open new tab.
    How to open new tab by downloading a PDF

  • How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.

    How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.

    You can use an extension to set which page to open in a new tab:
    *NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
    *My Homepage: https://addons.mozilla.org/firefox/addon/my-homepage/

  • Will not open new tab when clicked on the + next to open page

    firefox does not open new window when I click on the new tab +
    also does not open new tab when going through the file menu

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    See:
    * [[Troubleshooting extensions and themes]]

  • Firefox will not open new 'tabs', not sure if its disabled, but does anyone know how to enable the use of my tabs?

    Firefox will not open any tabs on my browser. I've tried using all alternatives to open a new tab - using the 'plus' (+) button doesn't work, 'control + T' doesn't work, going to File and clicking 'new tab' doesn't work either? Help please!

    Your suggestion worked! Thanks!

Maybe you are looking for