FIlters not working

I am having trouble with my filters. I am running FCP5 on G5/2.5 dual/1.5gRAM/OS10.3.9. This is what is happening to me:
I dropped the brightness/contrast filter on a clip. I double-clicked that clip with playhead on it. Altered the image in the Viewer window. My NTSC shows the alterations taking effect. I render the clip. As soon as it is done I play the clip and it reverts back to the original condition although in the Viewer I see the filter is still in place and my settings unchanged. Should I uncheck and the recheck the filter activation box in the Viewer the changes I made once again effect the image in the NTSC monitor however I must render again. When I do the whole thing repeats itself.
Also I am unable to do keyframes with these filters, e.g as an experiment I tried setting a keyframe at clip's begining for no Gaussian Blur with it slowly ramping up to full blur and nothing happened; this is by using the keyframe controls in the Canvas. However I can physically place a keyframe on the clip's timeline in the Viewer and that works.
I have trashed FCP and QT pref, zapped PRAM, multiple permission repairs.
I am also having some general issues with little buggy things system-wide like windows not closing unless I move the window over a pixel or two and then try closing it. Or clicking on buttons repeatedly with no response until I click somewhere else on the window, THEN the button operates. So am I facing a system bug that will require me to reinstall? I have Tiger but was waiting to install until after this project but I am fearing someone is going to tell me I need to reinstall everything.
Fearing the worst
alan b
ps--sorry for the long-windedness

Well I sucked it up and upgraded to TIger. Everything seems to be functioning okay, but no go on the filter situation. Same deal.
Just for yucks, I dropped the gamma filter on this clip and ramped it up beyond where I would really want it; much lighter than it should be. Rendered it. Again as soon as rendering finished it reverted back to its former dark self only it didn't go all the way back. So it seems it reverts back about 60-70% of the way back to the original condition.
In other words, working under these less-than-acceptable conditions, if I were to put the gamma filter down, set it about twice as light the clip should look, it should look about how I want it after the rendering finished.
But I don't want to do this. Anybody with a clue?
alan b

Similar Messages

RV220W - Content filtering not working (?)

Hello, I bought a router model RV200W fw 1.0.1.0... nice toy.
It all works very well with the exception of content filtering. The rule only works if connections are made with the HTTP protocol, but if the user connects with HTTPS, then the rule is not considered... (???)
f.e.:
http://facebook.com (content filtered)
https://facebook.com (content NOT filtered)...
What the hell ! where I'm wrong ?
Does anyone is experiencing the same ?

Yes, the correct title was "URL FILTERING NOT WORKING"...thanks abudef000
I do not want be polemical, but I do not understand where I went wrong.
Before I buy I looked @
http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps11025/data_sheet_c78-630461.html
Check it out.
Could you assume that HTTPS URLs are not in the sentence "Static URL blocking, keyword blocking, approved URL" as stated in the product sheet ?

When Export ssrs Report to CSV file runtime filters not working

The Runtime Filters not working when Export SSRS Report to CSV format

Hi PatilPriti,
As for my understanding, the filter worked fine when you preview the report,
but it did not work when you export the report to CSV format. I tried to export the report to CSV file on my side, and the data was shown as expected. I guess the issue is due to the parameter or filter. please try to export to Excel format to test again
and make sure you created the filter correctly. Please refer to the following
blog about how to add a filter in SSRS:
http://arcanecode.com/2010/07/12/adding-filter-parameters-to-sql-server-2008-reporting-services-reports/
If the problem is not resolved, i would appreciate it if you could give us
detailed description of your problem.
It’s better to provide the table structure and some sample data, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

Some filters not working in photoshop cs2

The bas relief, charcoal, graphic pen, halftone pattern, photocopy, plaster, reticulation, stamp and torn edges filters are not working working for me for some reason.
I checked the image mode and it is set to 8 bit RGB like it is supposed to be, but for some reason it just makes the images Black and does nothing else.
Here is a example.
I put in a normal jpeg image just like this one.
But when I put try and put one of those filter's on it the image comes out like this.
The image just turns plain black. Ive tried restarting photoshop but it doesn't fix the problem

Try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Filters not working correctly

We have the strange situation, that filters in calendar views are not working correctly (anymore?).
If i set up a filter to search for my name as attendee, teaming still shows all entries instead of only just mine. This behavior applies to customized and standard calendar views.
Filters for (customized) file folders still work as expected.
Any ideas?

jasi,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Filtering not working for newly added child objects in master-detail table

Hi,
I am using Jdeveloper 11.1.1.4 version.
Problem scenario:
Filtering of records is not working for newly created child objects in a master-detail scenario.
Steps to reproduce this issue using HR Schema (using LOCATIONS and DEPARTMENTS table ) :
1. Create Business components (EO's & VO's ) for LOCATIONS & DEPARTMENTS table)
1. Create a .jspx page and insert a readonly master table of Locations
2. Insert a child table (inline-edit table) of Departments and enable filtering
4. For the child table, drag and drop CreateInsert operation as a toolbar button .
5. Create a new child record using the toolbar button and enter data .
6. Filtering on the newly created child record's attributes does not work.
Please note that the same filter works for existing child records.
Any suggestions for resolving this issue?
Thanks,
Vikas

Found from Fusion Developer's Guide the following snippet about QBE functionality :
"+When you create data controls, all data collections will automatically include a Named Criteria node with an All Queriable Attributes criteria. This is the default view criteria that includes all the searchable attributes or columns of the data collection. You cannot edit or modify this view criteria+. "
So, the question is if the implicit view criteria cannot be edited, how else to set the query execution mode to "Both" ?
Shouldn't ADF BC support this by default? Is this a bug?
Note:- If you create a maste-detail table using POJO datacontrols, filter works correctly for newly created child records also .
This seems to be an issue with ADF-BC datacontrols only.
Thanks,
Vikas

Enable/Disable Library Filters not working properly

I am running LR 3.4.1 on OS X 10.6.8. The Library>Enable Filters command does not work properly when I have a Library Filter set up to filter on more than on criterion. For example, I have a Library Filter preset called "Needs Location Keywords" that selects all images for which don't have "Location" as one of their keywords and which are not flagged as Rejected. In other words, there are two filter criteria applied: 1) TEXT: Keywords "Don't Contain" "Location"
2) ATTRIBUTE: Flag = Flagged OR Flag = Unflagged Toggling the Filter State by choosing Library>Enable Filters works as desired when the Filter State is changed to OFF; all images in the selected folder are displayed. However, when Library>Enable Filters is selected a second time, changing the Filter State back to ON, only one of the original filter criteria is applied, namely: 1) TEXT: Keywords "Don't Contain" "Location" However, ATTRIBUTE Filtering is NOT re-enabled as one would expect.
This is repeatable with different filter settings and different folders.
Is this behavior unique to my system or are other seeing the same thing?
Thanks,
Michael

It is a known problem, but certainly not widely-known. The filter columns don't work properly on custom fields when the field is text and when the entered value consists of more than one word. IIRC they work if the possible values are listed in the plug-in's field definition, or with "enum" fields.
Smart collections do work as expected with text custom fields.
John

ProtectLink Web Protect URL Filtering not working

Good day!
Please help.
We have a problem on our RV042 router.
The Protectlink WebProtect URL filtering is not working.
When we first activate the service (Nov. 12), it worked for a few days, then 2 days ago, our internet connection got problems. But yesterday, our ISP fix the problems on our internet connection, but the URL filtering of WebProtect is not working anymore even if it is enable, up to this time.
What should we do about this problem?
Thanks in advance for your kind replies!

i have installed TMG 2010 and created url filtering rule for facebook.com but that problem
is ever after five minutes i can see that the users can access facebook. and then i check in TMG MMC so i can see that the Category Query says me that facebook.com is unknown....but just after five minutes i can see facebook has been automatically blocked
and i can also see in Category Query it says me facebook is in blog/wiki category...
so why it is changing automatically every after 5 or 10 minutes :( ?
where is the problem ???
i need your help please !!

Boris filters not working

Not all of my Boris filters are working in motion 3. They seem to be intermittent. This seems to be a new problem. I have had the system for about 1.5 years and I have not done any up grades. Any one with an idea????
Mike

What Boris effects come with a system?
Patrick

Universe filters not working OK

Hi Gurus. Can someone help me, PLEASE?
One of my users is convinced that if someone modifies a report that has been scheduled, universe filters used in the report get damaged and don't work properly.
I need to explain my user that if you do something just in your deski report it doesn't alter the universe, but this user is convinced that this is the other way.
I don't know why exactly this user thinks that. Is there any documentation to prove that what you do in a report don't alter universes?

"One of my users is convinced that if someone modifies a report that has been scheduled, universe filters used in the report get damaged and don't work properly."
This one i possible, as the filters are already in the report, if someone modifies report SQL, it might not work properly.
The original filters inside universe will remain untouched.
I don;t think there is a doc that will say this. It's just how the product works, Deski?Webi read from universe, never write to it.

Filteration not working after Upgarding 8.8 PL 20

Hi All,
We have recently upgarded sap B1 8.8 to PL 20 .In AR invoice cardcode choosefromlist I have applied a filteration .After upgardation the choose fromlist filteration is working fine but when we type something in the cardcode text box it will display matching results which is overriding my choosefromlist list filteration . Is there any way to filter that also ? Please see the below SAP note
1504754 - Fast locating of searchable data
Symptom
When user enters words in the some specific fields, for example, "Customer", "Name" or "Item No" in Sales Order form, system would show a list of options which match the inputted words. User could quickly choose the expected option from the list.
Thanks in advance
Arun

IM running the latest 8.1.2. I've tried every suggestion I've read. Any other ideas

Filters not working in PS CS4

I purchased PS CS4 not too long ago and I cannot get my filters to work . They are all grayed out! I made sure that my images are in the right mode, RGB color and 8 bit, still they are all grayed out. Anyone have any suggestions? I'm sure getting frustrated....

To use the Filter Displace one needs a Displacement Map – a file which is used too determine the offset of every pixel in the image.
This can be any 8-bit-psd-file; I prefer to have one the exact same measurements as the image I want it applied to.
Furthermore I recommend applying the Filter as a Smart Filter, so as to be able to change the values later on.
In this example the middle segment shows the Displacement Map which is used to transform the left image into the right.
Edit: It is important to be aware that one can use two channels to determine the horizontal and vertical offset separately with the Displace-Filter; the first two channels in the map-file can be used, no matter if it’s rgb, cmyk, ….
I don’t know a puzzle-Filter to be included in the standard installation, but there are, I think, 3rd party Filters and Actions available for the task – a web-search should provide some results.

Filters not working in Column A

In Numbers 3.0 Filters have not worked in the first column regardless of it being a header column or not.

Works ok here.
This:
Results in this after checking the Filters box:
The ability to filter on more than one column at a time is good. Need that back for sort too.
SG

Video Filters not working.

I'm using Final Cut Express 4.0.1 the Academic version. Whenever I apply a video filter to a clip, in any fashion, there is no effect. No change in the viewer or canvas. Even when exporting the filters do not show up in the final export. I know I am applying the filters correctly, I have gone through the exact same steps on a different computer and achieved positive results.
I have tried trashing the preferences but there was no change.
Any help would be greatly appreciated.
Thanks

Hey Tom,
I add the filter the same way I've always done which has always worked in dozens of projects before:
1. Put the cursor over the clip in the timeline so it shows in the viewer.
2. Double-click the clip in the timeline and it opens in the canvas.
3. Use the browser to locate the brightness filter, drag that brightness filter to the clip in the canvas (from step 1).
4. Click the "Filters" tab in the canvas and adjust my settings and the changes are visible in the viewer and the video tab in the canvas.
This process works fine in a new sequence, but will not work on the same clips in their existing/"bad" sequences. No process works to add a filter to a clip in one of the "bad" sequences. I can even:
1. Use the browser to locate my original clip,
2. double-click it there to open it in the canvas,
3. add the brightness filter by locating the filter in the browser and dragging it to the canvas,
4. adjust the brightness there which adjusts it in the video tab of that clip in the canvas,
5. drag that clip down to the timeline in one of the "bad" sequences and - while the effects of the filter disappear (the brightness changes revert back as though the filter is not there) - double-clicking that newly-added clip in the timeline to open it in the canvas reveals that the filter is still on the clip, and the settings are kept, but there is simply no effect visible from it. Yeah, bizarre.
6. Then I can copy that clip from the "bad" timeline which has the filter on it with no visible effects, create a new sequence and paste that clip into it, and bingo, the effect is visible.
I can also double-click a clip from the timeline of a "bad" sequence so it opens in the canvas, add the effect but see no visible change in any view, then open a new sequence and drag the clip from the canvas into the new sequence and the effect is there visible.
Can't explain that one, but that's what is happening.
But the filters add just fine in the new sequence, using the exact same clips as copied from the "bad" sequences. I have no answer as to why this process does not work in my existing sequences but works just fine when I copy the clips to a new sequence. Maybe I screwed up my sequences somewhere during this project that I don't know what I did. But that's what's happening, and copying to a new sequence is the best workaround I have found and it's easy.
I upgraded from 3.5.1 to 4.0.1 recently and this is the first project I've done since then and the first time I've noticed this problem. Not pointing to that as the source, but just providing info.

[SOLVED] cat6500 vlan filtering not working

Hello!
I have cat 6500 with SUP32-GE-3B/MSFC2A/PFC3B, s3223-adventerprisek9-mz.122-33.SXJ6.bin,
and WS-X6148-GE-TX module.
And I have a couple of 3750G.
On all of 3750G there is a broadcast filtering of VLAN 4000, and it's working:
mac access-list extended badhosts
permit any host ffff.ffff.ffff
vlan access-map dropbad 10
action drop
match mac address badhosts
vlan access-map dropbad 20
action forward
vlan filter dropbad vlan-list 4000
Then i copy this config to 6500, and it's not working. I configured two ports, one is switchport access vlan 4000 and other is switchport capture allowed vlan 4000, and i see on both ports same broadcast traffic. Filter is working, but packets are not dropping. I've tried to find something in manual, but found only about platform cwan acl software-switched, enabled it, nothing changed.
cat6500# sh vlan filter
VLAN Map dropbad:
Configured on VLANs: 4000
Active on VLANs: 4000

i think i solve the problem: to make vlan filtering to work on 6500, i've added:
# conf t
(config)# int vlan 4000
(config-if)# no shut
(config-if)# mac packet-classify
Now, how to mark this question answered?

Bridge on Mac deleting/rejecting/filtering not working!?! HELP

Ok seems as if I am having a problem only windows users have run into in earlier versions of CS. I was using CS5 on my PC and for many reasons I had to dump the dead weight of the PC world and move to a Mac... FINALLY! But that also ment purchasing a new CS5 for Mac. I thought this would be flawless... CS5 to CS5. WRONG. I store my photos on a 2TB external, same one i used on my PC. Now, I can not do any sort of "editing" of image info like "delete, "reject", "star" or anyother rating within bridge. It does not work with key commandes or from the menu. After researching this issue for two days it seems as if this issuse has been reserved for PC users and earlier versions being upgraded to newer ones. This is not the case for me. They said to "use as Administrator" I am the adminsitrator, and have made sure the permisissions have been set to read and write. That has not made a difference. Others have said that there seems to be no solution. Things they have tried include:
~Uninstall/reinstall of CS
~administrator settings
~setting it to open automatically at start up
~deleting pictures and reloading them through the new software version (this also seems to be an issue reserved for photos that have already been uploaded, I do not know if this will change with new images loaded through the new version as I have not had a chance to try it, since I'm trying to resolve this first)
I need to have access to my previously loaded files and this is a huge hiccup!
PS I can open the files to Photoshop, and edit, and the changes seem to stick, its just any organization, deleting, staring etc actually in bridge DONT stick. another issue that the PC users seem to have is error messages and pop-up windows when tring to exicute these tasks. I have no error messages.
PLEASE HELP! thx

I am read only on both of my externals! when i tried to find a way to set permissions, it says that I should be able to find a "lock" once I have gone to "get info" there is no "lock" so that I may enter my password and change permissions.
First thing that comes to my mind is that you have used the same external disks as you did for Windows. And that you did not reformatted them for a Mac using MacOS Extended (Journaled) formatting.
Without knowing your situation I assume you have a back up disk with the same content as your problem disk. If not it might be wise to buy a new back Up disk. There is one thing sure about disks, they all have an end date, some sooner most later but they all die and often at a moment you did not expect it nor could use it...
Make sure you have a proper back up and the reformat the disk (or the new disk) using Mac Disk Utillity
Personally I always use the safety option to overwrite the disk once with Zeros but that takes a bit longer.
Give it a proper name and use the default format as mentioned above. Copy the content back to the new formatted disk and try again
If in doubt try another older disk or buy a cheap one for testing if this method is working for you.

FIlters not working

Similar Messages

Maybe you are looking for