Filters on CSWP not working when Scheduling Start Date sets Immediate Value

In Sharepoint 2013, When users sets value of "Scheduling start date" to "Immediately", the filters does not work correctly.
I have checked many forums where it is mentioned that If you set scheduling Start date to Immediately, internally the Scheduling Start Date is set to 01/01/1900.
When i use query in content search webpart as publishing date is between "Scheduling Start Date" and "Scheduling End Date" so it fails. it  does not displays filtered data.
Please provide some resolution for this issue.
I have tried using calculated field wherein we can put formula to get value for Immediate value and then use it in Filter expression. but I need another approach related to "Scheduling Start Date" Column. i.e can we remove the Immediate radio button
or can we restrict user to use specific date only?
Thanks in Advance.

This is a new one on me.
It's a server program to interface with QuickTime and some other problematic services.
If you use video or 3D in Photoshop Extended, you probably need it.
Sounds like you are correct in that it has to do wtih Quicktime.  Do you have PS extended?

Similar Messages

  • Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

    Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

    Try to reset the PRAM first then go from there.
    http://support.apple.com/kb/HT1379

  • My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

    my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

    restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

  • Programm not working when scheduled via SE16

    I created a job in SE16 for a custom ABAP programm exactaly the way we always do,
    for one programm te job is finished after 1 second, when this programm is startend manualy it runs like it is supposed to run.
    Does anybody have a clue what can be wrong??

    Hi Rechard,
    Have you used any function in that.. !!?? like GUI_DOWNLOAD will not work when you ll go for sheduler of that program..
    Make sure where the dump arises...
    -Maharshi

  • Exit button not working when entering wrong date

    how do I get the message not to appear by day Invalid (Frm-50004) in forms

    dear Shrikant,
    i have one item start_date whose data type is Date and format mask is DD/MM/RRRR ,
    when i m entering worng date it is showing below message which i kept on ON-ERROR trigger of start_date item with an error code 50004 ;
    "FRM-50004: Day must be between 1 and last of month."
    as i m entering wrong date i want to exit my form but my exit button is not working properly.
    The message appears several times, about 3 or 4 times, because the focus is on the text item to the date, and is firing the trigger ON-ERROR, debugging the code, you notice that after the message back running the line "IF", because the error frm-50004 can not be erased, is giving this error all the time because the focus is on her text item!
    i have kept my push buttons mouse and keyboard navigation property to "NO".
    then also it is not working tell me if any solution is there.

  • Crystal reports not working when integrated security is set to true

    Hello Everybody,
    I have developed 20 crystal reports. When i deploy in my development environment(asp.net) these reports are working fine.My UAT environment is using application pool connection instead of database connection.
    My .net developer has written a code and he set integrated security to true for reports. My problem is reports which are having parameters not working correctly. Reports which are not having any parameters, it is working fine. If i enter parameters in asp .net page, the report is running for all the values. It is not considering the parameter values.
    Thanks
    Ram

    Hi Ram,
    Need more info, what version of CR assemblies, which OS is hosting the app and what patches, CR and OS are installed?
    Have you discussed this issue with your developer? Possibly all of the runtime is not on the app server?
    Thank you
    Don

  • IMessage not working when I start a new conversation iOS 6

    Hey guys, the thing now is that since I updated my iPhone 4S to iOS 6 is like the phone does not recognize my iMessage contacts.
    I can use iMessage, but the thing is that I only can send an iMessage if I go to my messages box and open an old iMessage conversation.
    If I want to start a new conversartion the send button never turns blue.
    I even tryied from Siri. Didn't work.
    It is not so bad but still annoying.
    As an additional information, in Ecuador, they just added a new digit in the international code. It shouldn't be a problem because my mobile number is already accepted by iMessage on my iphone settings.
    Hope you can help guys. I would be very grateful.

    UPDATE:
    I just discovered that the problem is that from my Messages software in my iMac mobile numbers are not recognized (even if they were accepted on the iMessage settings on my phone).
    If I send a message to my imessage contact, that contact receives it as a normal SMS but when he answers it is sent as an iMessage and then I can reply as an iMessage.
    But it is not possible to avoid the waste of that SMS.
    Maybe is the new digit thing.

  • Gnome-panel not working when auto-started in openbox

    Salut,
    trying to get openbox to work with gnome-panel. Everything works fine if I run gnome-panel when openbox is already started.
    But when trying to add gnome-panel to the autostart.sh with
    (sleep 1 && gnome-panel) &
    as the last line, I get the error message
    ========================
    The panel encountered a problem while loading "OAFIID:GNOME_ClockApplet".
    Do you want to delete the applet from your configuration?
    ========================
    for 3 or 4 applets. How to solve this?
    Thanks in advance,
    Stefan

    I found a workaround for the problem.
    Install xfce4-panel and xfce4-xfapplet-plugin and you will be able to run the gnome applets in the excellent and lightweight xfce4-panel.
    It works fine for me

  • Consolidation of multiple trees not working when scheduled thru taskflow

    Hi ,
    We are having a problem when we schedule consolidations for multiple entities using taskflow. Task audit is showing the successful completion of all the entities but when we open up a dataform it is showing ok only for the last entity in the list and CN for the rest of the entities. I don't know whether I am missing something in the taskflow or dataform setup or if it is a known bug. We are on 9.3.1 HFM version. Any help is greatly appreciated.
    Thanks in advance.
    Santosh

    Which consolidation option are you using? You should use "Consolidate" only in all cases, so you only do an incremental consolidation. If instead you use "consolidate all with data" on each hierarchy, you would impact the other hierarchies and be in a circular reference of sorts since "consolidate all with data" forces the parents to become changed. Of course avoid using "consolidate all".
    --Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • OSB singlethreaded processing PS not working when delivery failure is set

    Hi,
    Below is my process flow
    JMSQ -> JMS PS -> BS - > Endpoint
    So i have the requirement to send the messages one at a time so i did 2 settings
    1. JMS connection -> Max messages per session =1
    2. Created WorkManager with Max threads 1
    This works fine in case of normal processing
    But now i have a requriement to add a redelivery limit and redelivery interval in the Queue to route to error queue in case of error
    So in the delivery failure tab i changed the values..
    So when i do this change all the messages are consumed at once retried and roll backed. I need messages to be consumed one by one and retried.
    Am i missing some thing? Or singletonprocessing wont work with ReDelivery can anyone please suggest?
    Appreciate your help.

    Any suggestions on this?

  • Ie8+fp10,1,102,64  fullscreen not working when allowNetworking param was set

    I got SecurityError#2152 when i set fullscreen mode in the MouseEvent.CLICK response function, i didnt set wmode param, and did set the allowFullScreen to true, and still got this error.
    But after i removing this param:<PARAM value="true" name="allowNetworking" />,  the fullscreen mode works fine!!!!
    WHY?? Is this a BUG?

    my fault.....allowNetWorking can't be set to true.....the optional values are all/internal/none.
    so sad...i paid a long time to find this problem....

  • Why is gmail not working when I try to set up in Mail?

    I cannot set up my mail account. i try to set it up but when I enter my information, it says: Logging in to the Gmail IMAP server “imap.gmail.com” failed. Make sure the user name and password you entered are correct, then click Continue. If the information isn’t correct, you cannot receive messages.
    What is wrong?

    how are you connecting to the internet?
    think is many mobile network providers block various ports which some mail services rely on

  • Search not working when using mobile data

    DescriptionWhen using mobile data, every time I try to search for tracks, I get the 'error occurred' message. A more detailed description, using numbered steps1. Be using mobile data as opposed to wifi2. Use search function   What I expected to happenSee my search results What actually happenedSee 'an error occurred' message. Important - even though the screenshot shows 1 'bar' of signal on 3G, this problem occurs regardless of signal level. I've tried to search using full-strength 4G and still seen this problem. My iPad/iPhone modeliPhone 6 / 64GB Device’s Operating SystemiOS 8.4 (12H143) Is your device jailbroken?No Approximately how many playlists do you have?More than 200 My mobile Spotify version3.5.0.1069 My desktop Spotify version (if applicable)1.0.10.107.gd0dfca3a My provider and countryEE UK My usernametombot18 Do you have any screenshots you can attach to more clearly explain your issue?See attached screenshot 

    I have the same problem.... anything fix it?

  • FireFox Select List not working with Spry XML Data set.

    I am having a problem with FireFox.  I have a set of related select lists that allows a user to pick a state and then a market.  The work in all browsers except FireFox.  I'm totally stumped.  Here is the link. Any assistance greatly appreciated!
    http://myxpertise.pointinspace.com/create.php
    Thanks,
    Joe

    <span spry:region="dsCities dsStates dsStates" id="citySelector">
         <select spry:repeatchildren="dsCities" id="citySelect" name="citySelect" tabindex="5" >
          <option spry:if="{ds_RowNumber} == {ds_CurrentRowNumber}" value="{name}" selected="selected" tabindex="5" >{name}</option>
          <option spry:if="{ds_RowNumber} != {ds_CurrentRowNumber}" value="{name}" tabindex="5" >{name}</option>
        </select>
    that should be a spry:detailregion, and you have a double dsStates
    And when you are using multiple datasets inside a region, it might wise to prefix you template tags with the correct dataset
    {ds_RowNumber} => {dsStates::ds_RowNumber}

  • I just upgraded my iPad to iOS8.  I use VPN for work, when I start Safari up with the VPN on, Safari crashes the VPN.  VPN stays up when I use Chrome or Opera, but not Safari.  I had no problem with iOS7.

    I use my iPad for work when I'm out of the office.  I have to use VPN to access my company's applications and servers.  I just upgraded my iPad (an iPad Air) to iOS8 from iOS7.  Now, every time I start Safari up, it crashes VPN.  If I use either Chrome or Opera, the VPN stays up.  It also works fine with Mail, etc.  Only Safari crashes the VPN.  Anyone else experiencing this?  It always worked fine with iOS7.

    More info, it's not simply when I start up Safari, it's when I open multiple tabs and go from one tab to the next in Safari.  Doing this sporadically caused the VPN to turn off.   It happens whether I'm on a work web page, or I simply open up several public sites like CNN, MSN, etc.  I've had to go to using Chrome all the time when using the VPN so that the VPN will stay up (it stayed up all day yesterday while I was on Chrome, while using work web sites, and public web sites).  I tried getting back into Safari at the end of the day, opened a couple of tabs, went back and forth to the opened tabs and VPN immediately shut off.

Maybe you are looking for