Filters, styles, effects not showing in pse12

I have a pse12 in win 8 pc. When I open editor, the filters, styles, effects are not showing up. Pls help. Thanks.

Hi, you are posting in the wrong forum, and will do better asking in the Elements forum
http://forums.adobe.com/community/photoshop_elements
To be clear, are you saying you can see the menue bar, and that you are not seeing what you'd expect to see under Filters?
Or can you not see the menu bar and/or the toolbar and other panels? In Photoshop you can toggle through three different screen modes with the f key, and turn panels off and on with the Tab key.
If that didn't help go ask in the Elements forum, but give a lot more information.

Similar Messages

Effects not showing in timeline

Hi
When i'm color correcting a clip, it's seen in the user. But when Im putting into the timeline the effect is not showing. if I now right click at an view it in the viewer the effects is no longer shown. All though you can see the settings it won't show if you change them.
My RT settings is not set to show baselayer only.
It would be great if someone can help me out!

It would be helpful if you would describe the sequence of actions you are taking.
Are you applying one of the color correction filters to a clip already edited into the sequence / timeline? Etc.

No Filters, Styles, Effects in Photoshop Elements 11

I purchased Elements a while ago, but just realized that Filters, Styles and Effects are empty : (
I'm using Mac (OSX 10.8.3)
Please, help!

Adobe doesn't provide support for the current version much, either.
You need to delete mediaDatabase.db3. Quit the editor, then go to your hard drive>library>application support>adobe>Photoshop Elements>11.0>Locale>en_US (or your location) and delete it. Then relaunch the editor but don't do anything till ilt's through rebuilding those panels.
(Note that this doesn't pertain to the mac app store version.)

Lighting effects not showing up in CS5

This plug-in is not showing up on both CS5 and CS 5.1 running on a MAC OSX 10.6.7 Italian system. I have tried both from the Italian versions of PS and even from one new version in English of PS5.1 and it isn't to be found under the menu "rendering" or enywhere else. I see that it is in the plug.in folder and the folder of lighting effects is there as well, but it just doesn't show up. Any ideas about this bug? I've tried it on 3 different computers!

As far as i know, the lighting effects filter only works in the 32 bit version of
photoshop cs5/5.1 on a mac system.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7959a.h tml
There is also a photoshop macintosh forum (you posted in the photoshop elements forum)
http://forums.adobe.com/community/photoshop/photoshop_macintosh
Added: If you have the extended version of cs5, you might experiment using 3d lights
for lighting effects, which works in the 64 bit version of cs5. Turn your layer into a
3d postcard and use the 3d lights for various lighting effects.
MTSTUNER
Message was edited by: MTSTUNER

Effects not showing up in LiveType

Hello - I am trying to apply an effect in LiveType, and while it looks like it's going into the timeline, there is nothing there. It looks as though the effect has been applied to the timeline, as it says the name of the effect, but the effect does not show up... thank you.

Hey Nick - thanks for offering to help! Turns out all I did was close out of LIveType, then open it back up again, then the Effects seemed to work, though don't how, as I did not do anything different before I closed it out... hmmm... ok then, thank you again!

Effects not showing up in ichat

Hi all
I am not able to get my video effects to show up in ichat. I am able to use them in photobooth and imovie.
josh

iChat uses Core Image
http://docs.info.apple.com/article.html?artnum=301347
4:16 PM Sunday; December 9, 2007

Preinstalled filters from CS5 not showing up in CS6 upgrade

I just installed CS6 upgrade from CS5 but the Nik and Topaz software filters are not showing up. How do I get CS6 to recognize them without having to reinstall all of them again.

How do I get CS6 to recognize them without having to reinstall all of them again.
You don't. The behavior is as it always has been - Adobe apps never migrate legacy plug-ins and content to avoid compatibility issues. and you will probably need updated vertsions for CS6, anyway.
Mylenium

Plugin Effects not showing up in FCPX

Hi,
I recently bought a new computer. I installed FCPX and copied my plugin effects to the movie folder (motion templates, etc.) the same way I had them working in my old computer, but the effects are not showing up in FCPX when I launch the Application. I read somewhere that it might be a permission issue so I ran disk utility but it didn't make a difference. Any ideas?
Thanks,
Marc

I know this is an old thread but I had the same issue. Found this on Apple's Motion help document. This was very helpful:
.moef is the Final Cut Effect template extension.
.motn is the Final Cut Generator template extension.
.moti is the Final Cut Title template extension.
.motr is the Final Cut Transition template extension.
Just be sure your templates are in the right folder. I had downloaded a template that I thought was a title but ended in .motn, which meant it was supposed to be in the /Movies/Motion Templates/Generators/ folder. Good luck!

MiniDV Video in Affert Effects not showing correct ratio.

I'd like to know how to edit minidv video in its aspect ratio in After Effects. Video is 720 by 480 and 16 by 9 (non-square pixels). When I import the video, it's stretched too tall (set to square pixels I believe). No mater how many times I change the composition ration to widescreen, it still does not show correctly.
I seem to do fine in Premiere. It automatically sets the aspect ratio for minidv video. But I can't get After Effects to do it. I don't want to spend time creating something only for it to be squished in Premiere later.
So how to do create a composition that's 16 x 9 using non-square pixels 720 by 480 that can be edited into miniDV video in adobe premiere?

If you properly interpret your footage as widescreen (AE may guess incorrectly here) and put it in any square pixel comp it will not look distorted but it may or may not fill the frame. It will only fill the frame if the frame size is the square pixel equivalent size of your widescreen footage. This applies to all non square pixel aspect ratio footage.
If you interpret your footage as widescreen and put it in the same format (NTSC, PAL HDV) widescreen comp it will also fill the frame. There may be some black pixels on the left and right side because almost all cameras don't put live pixels in every column or even every row of the frame, but the footage will fill the frame. The caveat is that this footage will look distorted unless you activate pixel aspect correction preview in the Comp window because computer displays are always square pixels. You have to fool the display by selecting this option.
When you render your widescreen comp, if you're using any of the standard DV codecs or a codec like Quicktime Animation or JPG, there is no place in this codec for an aspect ratio tag that will tell apps like Premiere or FCP or Avid that this footage is supposed to be widescreen. Once you import the footage to another app you'll have to check and make sure that the footage is interpreted as widescreen there too.
I hope this helps. What ever you do, do not use the Fit to Frame option to force footage into a comp frame. If you insist on using Fit to Frame then check the X and Y scale values after you do and make sure they are identical. If they are not, you've distorted your footage at that point and it will be difficult or impossible to fix it later.

IR + jQuery + Waiting Effect - not showing from region's parameter

Hello All:
I have two problems 1) implementing a tip of Martin Giffy D'Souza does not work, funcionality work with IR + jQuery and showing an waiting effect prevent to users re-run the IR. I add one region's parameter to pass variables to IR.
Waiting effect is showing when you touch button GO (IR region), but not working when touch button SUBMIT (parameter region).
2) on the other side when I run (SUBMIT or RESET) the application in my workspace in OTN gives me the error (http://apex.oracle.com/pls/otn/wwv_flow.accept) in my environment (pc) is working fine.
http://apex.oracle.com/pls/otn/f?p=12819:1
Developer: http://apex.oracle.com/pls/otn/f?p=4550:1
Application = 12819
workspace: RPUTELLI
user:TESTER
pass: tester
Thanks
Rolando

Hi Rolando,
Are you referring to this post: http://apex-smb.blogspot.com/2009/04/apex-interactive-reports-customize-wait_28.html ?
So you'd like the same functionality to work when you click on the "Submit" button?
Martin
[http://apex-smb.blogspot.com/]

Colour Effects not showing up under effects panel anymore?

Hi,
After trashing my preferences due to an export issue, and then updating the app, the colour effects bar is not showing up under the Video Effects window like it did using the default layout. Using command-6 still pulls up the colour board but I cannot create masks or access it like I used to. The window now looks like this:
I know it's probably a simple fix but I can't figure it out.. Is there a way to restore factory settings?
Thanks for any help you can give me!
Joe

I knew it was something stupidly simple.. Thank you so much!!!
Joe

Styles are not showing in html mail

Hello all,
i have a servlet that sends a mail in html format. i have a string with all the html tags, and the first part of the string is as follows:
String htmlText = "<html><link href='styles/styles.css' type='text/css' rel='stylesheet'>....here gos the rest of the html tags.
i receive the mail properly, but seems that the styles are not working....any help?
Thanks

Because the link to your stylesheet is a relative URL, and in an e-mail there's no base URL for it to be relative to. Using a fixed URL like http://yourhost.org/styles/styles.css would probably work.

Special java effects not showing up

Going to my band's website thru Foxfire.. I installed some java that gives the effect of stars moving in the background.. It show up in other browsers but not Foxfire..

That script isn't working in Firefox.<br />
You can't have multiple IDs si and address them via si[i]<br />
You need to use a similar construction as for Netscape and add the index to the ID (si0-siXX)and use document.getElementById('si'+i)
I don't think that there are much users with a Netscape browser, so you can leave out all that ns code and use code that modern browsers understand.
<pre><nowiki>for (i = 0; i < SmallStars; i++) {
document.write('<div id="si'+i+'" style="position:absolute;top:0;left:0;width:1px;height:1px;background:#fffff0;font-size:1px"></div>');
function fly() {
document.getElementById('li'+i).style.left = LargeXpos[i];
document.getElementById('li'+i).style.top = LargeYpos[i] + hscrll;
document.getElementById('si'+i).style.left = SmallXpos[i];
document.getElementById('si'+i).style.top = SmallYpos[i]+hscrll;
setTimeout('fly()', 10);
}</nowiki></pre>

Raw files not showing in PSE12

I recently upgraded from a Canon T3 to a Canon 70D. I had been using PSE11 with my T3 without any trouble. But when I got the 70D it would no longer load my raw files. I did some quick research and saw that I needed to purchase PSE12, so I did. However, my files still aren't showing even after doing an update. I'm running on Vista and while my computer is 7 years old it really is working great so I would like to avoid getting a new system just to upload the raw files. I read about DNG but I really don't want the extra step of having to convert my files. I just want to be able to import the raw files and work with them from there. I read somewhere that it's possible to do a manual upgrade to camera raw 8.3, but I can't find any directions. Would love some help. I'm about to pull my hair our. What's so hard about them offering the update through the program I just shelled out $80 for. I shouldn't have to spend hours getting PSE12 to work. Thanks in advance for any help!

Sure, it's not too hard to do the upgrade to camera raw 8.3.
First download and install the 8.3 dng converter to install the required profiles for camera raw 8.3
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
Then download the Camera Raw_83_GM_32bit.zip from the following link
(it's under where it says Revert to 8.3 on Windows 32-bit Windows XP and Vista)
(since pse 12 is a 32 bit program on windows, you want the 32 bit camera raw plugin)
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista
Extract the contents of the Camera Raw_83_GM_32bit.zip and copy the enclosed Camera Raw.8bi file to
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 12\File Formats (64 bit windows vista system)
or
C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 12\File Formats (32 bit windows vista system)
It's a good idea to delete the old camera raw plugin before pasting the new one into one of the above places.

Editing software filters/plug-ins not showing in LR 5.4

I have editing software and plug-ins that I use mostly in LR, but now I notice when I use them, the filters don't show up. I have Google Nik Collection, Topaz suite, Photomatix and Perfect Effects 8. I went to my LR preferences >external editing and the first editor I have is Photoshop. The sdditional external editor is HDR Efex pro 2. In the Additional editor, should I be making that a new preset, or as a custom preset. Am I only limited to 2 choices in the External editing preference pane?
I notice that in the File>Export w/Preset, it lists HDR Efex Pro and Photomatix Pro. Under file>Plug in extras, it lists Perfect Effects 8, and again, Export to Photomatix Pro. Opening any of them, the filters don't appear like they used to. What am I overlooking? This is making me crazy with loss of time since I have a show coming up. Any pointers would be appreciated.
I am using a Mac, OS Mavericks which I just installed a couple of weeks ago.

It isn't obvious, but you can add as many external editors as you want. In Preferences/External Editing, hit the Choose button, select an application, then from the dropdown select "Save current settings as new preset". Repeat as needed.
Hal

Filters, styles, effects not showing in pse12

Similar Messages

Maybe you are looking for