Filters... why they gotta change over time?

So when i'm digging for sounds (e.g. instruments). I find one i like and think... i'd like to see variations on this sound. so i go through the plug-ins list and see how i can make it butter. The one called "filters" seems perfect! it will put a filter on the sound and it will sound similar, yet different!
But, wait!
When I apply the filters, they often change in time. E.g., "always rising" or "four bar upwards." Stuff like that. What if I just want to apply a filter that stays the same over time?
I have played around with the knobs and parameters, but couldn't figure out how to accomplish this.
Also, does anyone recommend methods for "digging?" How do you dig (for sounds)?
tank.u.so.muuuuush.

When I apply the filters, they often change in time. E.g., "always rising" or "four bar upwards." Stuff like that. What if I just want to apply a filter that stays the same over time?
Rather than just blindly applying presets, you learn what the various parameters do so you can shape the FX to your needs and tastes.
Learn what's modulating the filter cutoff - is it a level-based autofollower? Is it an envelope? Is it an LFO? Once you understand what these are and how they work, you'll understand how to use and shape them to do what you want.

Similar Messages

SCEP date range reports change over time

Not really sure how to title this, but here is the scenario. I have altered a canned report to run the first Monday of every month and dump a Word file w/links into a folder. The alteration of this report is simply changing the end date to be -30 from today.
So I am getting a 30 day report of all computers that were infected. The report runs and looks to be accurate based on alerting I have setup. The problem comes when I take this report and start to drill down into the data using the links in the report. Let's
say my report shows a virus name with an infection count of 3. I can click on 3 and see a list of PCs that were infected....well not so much. If between the time the PC was infected and the time I look at the report, any of the 3 PCs were cleaned of the infection,
then they will not show up in the drilldown. So if a single PC was cleaned...the count still shows 3, but clicking on 3 only shows 2 computers now. This pretty much goes for any data on the main page.
So essentially the report is pretty useless to go back in time and see detailed info on the incidents since the status of every bit of info in that report has changed over time. I am not a SQL person, but I did have one of SQL team look at the database and
she can't see anywhere that she can pull archived data from. Any idea what direction I can point her in to get the type of reports I am looking for?

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Change over time setup between operations

Hi,
1) In the Discrete MFG process, there 2 operations. In between there is a change over time or cleaning up time.
Where do we capture these change over or cleaning timings?
2) If i have 2 simultaneous operations, how do we handle them in routing?
Thanks,
Jey

Here are a few sites with various Motion tutorials:
http://www.motionsmarts.com/
http://applemotion.net/
http://www.kenstone.net/fcphomepage/fcp_homepageindex.html

Change over time on production line.

Hi Experts,
We have a scenario where we need to schedule the orders also considering the changeover times on a production line from one product to another. Suppose I am producing product A on the line and my next product is B, say the change over time is 10 mins. But suppose if I am changing from product C to product B, then the changeover time is 15 mins. Similarly it is different from one product to other based on what will be produced on the line next.
Like,
A---->B is 10mins
C----->B is 15 mins
D----->C is 30 mins and so on.
A big matrix exists for the same.
Is there any way that I will be able to handle this in standard SAP? Ideas will be much appreciated.
Regards,
Sachin

Hi,
You need to maintain the Setup Group Key in the routing, and then in capacity levelling table you group orders by this key, and then there's a function to reduce/change setup time for each order and for the group.
Definition of Setup Group Key - transaction OP43
Definition of Setup Matrix - transaction OPDA. In here you define the "new" setup times that substitute the "old" setup times, and are setup group dependent.
In the routing opration detail in CA02 or CA01 choose the setup group key on the "general Data" part.
For the capacity levelling part, it is too complex to guide you here.
Regards,
Mario

Does the address returned by GetDirectBufferAddress() change over time?

Let say I have a direct ByteBuffer instance allocated from the Java side using the ByteBuffer.allocateDirect(capacity) factory method. This buffer instance lasts for the entire lifetime of my application.
Can the address of the buffer change over time, for instance after garbage collection passes?
In other words, when I pass a reference to such a direct ByteBuffer to native code through JNI, will GetDirectBufferAddress() always return the same address for the same buffer during the lifetime of my application? Or somehow can the GC relocate the buffer elsewhere and the memory is pinned only when a local reference to the buffer is passed to my JNI method?
http://java.sun.com/j2se/1.4.2/docs/guide/jni/jni-14.html#GetDirectBufferAddress doesn't tell much about it.
Thanks for any enlightenment.

gpakosz wrote:
However this behavior isn't specified anywhere and thus is highly implementation dependent.Like I said I doubt that it would be useful if it did change.

Effect change over time?

Okay basicly I want to make an effect change at an interval over time... Like the color key for example I want it to go up 1 color tolerance point every second so I get like this cool morph effect, how could I do this? I have seen it in a video but they did not say how. Also the time mapping I can not seem to get the yellow lone working and to add keys or watever what exactly do I have to click I read a million tutorials, Sorry I'm new to this.

Watch video tutorials where you can watch exactly what is clicked on to achieve a specific goal. You will find links to many free tutorials in the Premiere Pro Wiki that will quickly
show you how things are done in PPro.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Using chart to track changes over time

Hi, I'm monitoring the progress of recovery from injury and need to analyse changes in grip strength over time. I would like to use a chart with grip strength on the Y axis and time along the X axis.
Unfortunately, the records were not taken at regular intervals, so the chart resulting from my data gives a misleading visual of progress. For example, my dates are sometimes one week apart, sometimes two, sometimes four.
Is there a way to get the time intervals to scale properly? That is, at the moment each date is at an equal point along the X axis, regardless of how long between the two dates (3 April, 14 April, 28 May and so on). What I want is for those dates to be separated along the X axis in equivalent proportions to their relationship in time (thus 3 April would be much closer to 14 April, than 14 April is to 28 May).
My only thought is to manually extrapolate the "missing" dates and guess the grip strength on those dates. Unfortunately this will defeat the purpose of the exercise. Any help most gratefully accepted, thank you!

An XY scatter plot (third from the bottom) will preserve proportions on both axes. Connect the points with (straight) lines for a broken line graph.
Regards,
Barry

Colors changing over time in Pages?

When I save a regular document in Pages a few times in which I have changed some of the text to a different color, the color seems to have changed sometimes when I reopen the document. Anyone know why it's doing this or how to prevent it?

No, I have not had the problem. Which system do you have? Which Pages version?

Why status is change every time after execution of VI??

Hello,
I am not much familiar with Modbus communication,
I got one problem regarding to Modbus that when ever run my vi then after execution the status of DO3 is always changed and jump to the Alarm mode.
In attachment I have attached my screen shots you will get more clear Idea about my problem.
In LHS there is software window and before connection that software with instrument normally I set my DO3 at status mode but when I run my vi in order to check the supply voltage and after execution when I again connect that software then DO3 status always change and its come to Alarm mode.
Can you tell me that why its happen so??
and what kind of changes I have to do in order to avoid this problem....
Thank you very much.
Attachments:
DO3.png ‏386 KB

ok this problem is solve now that i have to make read holding register instead of write...
but still I am confuse about the mesurment of voltage generally i have to set like
1) when (Do3 and datalogger switch both are closed) wired is connected with DO3 and relay on data logger is closed then its shoud show me voltage less then 2V,
2)DO3 is open and datalogger is connected then voltage shoud be near to V+ (12v in my case)
3)both are open then output shoud be 0V
4)datalogger is open and DO3 is closed then voltage shoud be V+
and in above four case i have problem in 1st case only...other 3 are working OK
will you please guide me that is ther any change I have to do in data logger and what king of settign I have to to in order to get desired Output.
I am not much familier with Data logger,i have read datasheet regarding to this and i am using Agilent Data logger 34970A.
Thank you very much...
Attachments:
MeasureDO3.vi ‏33 KB

Star Schema Dimension Hierarchy Changes Over Time

Say you have a dimension hierarchy with the level Department that has a child level Division. The Sales Division belonged to the Financials Department up until July 9th, 2011, after which it was moved to the Marketing Department. How can you make it so that both Sales Divisions are interpreted as the same Division, rather than two different Divisions as BI Answers does by default?

I don't think SCD1 would work as BI Answers essentially splits things via both keys and description fields, resulting in odd behavior such as this:
Time
Division
# Employees
All Time
Sales
16
22
Regarding SCD2:
So is there something I need to do on the repository so that BI Answers knows to switch between the two versions of the same Division at that particular time, such that I can make an Analysis such as this:
Month
Division
# Employees
% Change
May
Sales
15
-6%
June
Sales
15
0%
July
Sales
14
-7%
August
Sales
22
+57%
Instead of this:
Month
Division
# Employees
% Change
May
Sales
15
-10%
June
Sales
15
0%
July
Sales
2
14
-87%
0%
August
Sales
22
+57%

Why did iCal change all times when it changed to wintertime?

When wintertime (normal time) occurred the night before sunday, my Mac and my iPhone automaticaly changed. But not just that: all time settings for meetings and appointments were set back one hour!
What do I do?

kell3,
Welcome to Apple Discussions.
One of the first things to try is "refresh" the com.apple.iCal.plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, drag the .plist file to your Desktop, log out/in or restart and check iCal for normal behavior.
If that is unsuccessful, try resetting iSync. To do that you need to open iSync, and choose iSync>Preferences>Reset Sync History...
If duplicates are not resolved on your iPhone, open "Settings" on the iPhone>Mail, Contacts, Calendars, Bookmarks>Accounts>your MobileMe account and turn off Calendars, when prompted delete data, and wait two minutes, then turn Calendars back on. When asked to merge the data, make that choice, and wait patiently. You should no longer have duplicates. If you are able, I recommend using a Wi-Fi connection to make the change.
;~)

Export as HTML changed over time?

I used to be able to export only the page/pages I had edited if writing to the same folder, now it seems to take/write out many pages for an unknown reason...not all, but a lot. Please advise what I am doing wrong and/or what has changed.

You said,
"If you export your .muse site to a local folder, make a few changes to your site, and export again to the same folder, Muse should only write out the files that have changed. Depending on the changes you make in Muse, that might be one page, a few pages, a bunch of pages, or all pages."
When you say local folder, does that mean when I export to a folder on a server it will behave in the same way? As in only exporting pages with changes? Or does it mean only when exporting to a folder on my machine?

Why does iCal change the time of my events when I import my schedule? PLEASE HELP

When importing my schedule (from my school website, week by week), I had no problem in September. Now, something must be screwed up in my iCal, because the same documents are importing 3-4 hours behind my current time zone (Atlantic). Atlantic time is specified in the files, so it isn't that. This happens in the guest user as well.
I turned off time zone support (I feel as though this is what made it stop working, as the default was off and I turned it on around the time it stopped working). It still doesnt work even with time zone turned off and the time on my computer is set manually (instead of automatically detecting it). Also, I tried to find the preference file in my library>preferences, but it didn't exact... not one single com.apple.ical plist file in there!!! It seems to work fine from my iphone EXCEPT it creates 2 events for each single event (at the same time) which is rather annoying.
Anyone know/have any ideas on how to fix this??

Yeah that was it, I realised straight afterwards (I'm just impatient lol). Thanks anyway

Trend line % change over time

How can I automatically within Crystal XI generate a single percentage value at the end of the report that reflects the percentage (% +/-) change of the trend line as generated by the engine for that chart group.
Or optionally, thought not preferable, how do I get the values created by Crystal Reports XI to generate the trend line.

Hi Larry,
You can't get the percentage value which is generated by the engine in your report. You will have to calculate this value using formula and insert in a group.
Thanks,
Sastry

Changing a Filter Over Time

I've had a lot of trouble with this. I'm trying to change a filter over time (i.e. make a voice get more reverberative as it continues). I've had a little luck with some filters--some of the options for the filter show up on the envelope line so I can set key frames, but more often than not, nothing shows up there at all, or what does show up there is not the option I want to change.
For example, say I want to change pitch over time. The only option that shows up that I can set key frames for is the delay rather than the pitch.
I know I'm missing something simple here.

So, I take it that you're in STP, working on a multi-track project.
In the lower left on the effects tab, go to the correct track/effect you want to change, and click the disclosure triangle to show all of the parameters. Check the box to the right of each parameter you want to change over time, and it will be added to the available envelopes.
Hope this helps!

Filters... why they gotta change over time?

Similar Messages

Maybe you are looking for