FIM 2010 R2 SP1 with SCSM 2012

I know that FIM 2010 R2 SP1 now claims support for SCSM 2012. FIM Reporting allows us to use a free copy of SCSM / DW for just the purpose of reporting services. Does this only apply to SCSM 2010 or does this include SCSM 2012 as well? I just want to make
sure that we don't install SCSM 2012 assuming that it's free when in reality only SCSM 2010 is free. This issue came about because SCSM 2010 did not require a product key, but SCSM 2012 does.
Thanks,
Mark
Mark Creekmore - BlueVault Software http://www.bluevaultsoftware.com

On Fri, 4 Jul 2014 08:27:39 +0000, diramoh wrote:
on Microsoft TechNet link, we have the following Details:
Reporting: Unique key constraint violation when running reporting synchronization jobs
If you attempt to run reporting synchronization jobs on a default System Console System Manager SP1 (SCSM SP1) installation, you may receive the error “Violation of UNIQUE KEY constraint ‘idx_ManagedEntityManagedTypeId’.  Cannot insert duplicate key…”. 
To address this issue, please make sure you have the following updates installed on your System Center Service Manager Management Server, Data Warehouse Server, and any machines that have the System Center Service Manager Console installed on them:
1. KB2542118 <http://support.microsoft.com/kb/2542118>– System Center Service Manager Cumulative Update 2
2. KB2542118 <http://www.microsoft.com/download/en/details.aspx?id=26631>– System Center Service Manager FIM 2010 R2 Hotfix
Note:  *You must have the SCSM Cumulative Update 2 installed before installing KB2542118*
Shim is asking about the product key. The above has nothing at all to do
with his question.
Paul Adare - FIM CM MVP
What should I do ......the machine can't find the program
iexplorer.exe...
Breathe a sigh of relief. -- Arthur Hagen in no.www

Similar Messages

  • How do I add my Custom Workflow Activity to FIM 2010 R2 SP1 installed on Windows 2012 server?

    Hellos.
    I have tried and failed to add my custom.dll into the Windows Server 2012  GAC.
    We have a version of FIM 2010 R2 Sp1 running on Windows Server 2008 R2 and that was no problem. There seemed to be a gacutil.exe present on the system which added my assembly.
    I cannot find gacutil.exe on the Windows 2012 Server.
    I have downloaded and installed Windows SDK for Windows 8. However, when I try the gacutil.exe /i <myCustom.dll> nothing seems to happen.
    Are there any guidelines how to add custom workflow activities to FIM when installed on a Windows Server 2012 system?
    TIA
    *HH

    Well yes. It is fine when FIM is hosted on Windows Server 2008 R2.My difficulty is that I am using FIM 2010 R2 Sp1 and Windows Server 2012. No GACutility executable.
    However, the problem has been resolved. Powershell can be used to modify the assemblies.
    I opened a RunAs Administrator PS session. My assembly is in folder c:\Temp
    Using Windows Explorer I browsed the folder c:\windows\assembly and noted the System.EnterpriseServices entries: version (2.0.0.0) and public key token (b03f5f7f11d50a3a)
    (My version is 2.0.0.0 because when installing FIM and SharePoint 2013 the instructions I used suggested setting .Net version to be 2.0)
    These powershell commands got me going...
    PS C:\temp> [System.Reflection.Assembly]::Load("System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
    GAC    Version        Location
    True   v4.0.30319     C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50...
    PS C:\temp> $publish = New-Object System.EnterpriseServices.Internal.Publish
    PS C:\temp> $publish.GacInstall("c:\temp\RunPowershellLibrary.dll")
    PS C:\temp>
    PS C:\temp>
    PS C:\temp> iisreset
    Amazingly I can see the assembly RunPowershellLibrary in my Windows 2012 GAC. :-)
    Also, what is more cheering is that the custom activity actually works with FIM 2010 R2 Sp1.

  • Upgrade FIM 2010 R2 Sp1 Databases from SQL 2008 R2 to SQL 2012

    Hi,
    I want to upgrade my SQL from 2008 R2 to SQL 2012.
    FIM Databases   
    1) FIMService Database 
    2) FIMSynchronizationService Database 
    Mentioned above are my FIM databases running on SQL server 2008 R2 . Now I was looking for some article which could tell me if SQL can be upgraded without affecting my existing databases of FIM or if i can move these databases to a new server having SQL
    2012
    Activity I want to perform :  Create a fresh  Server of SQL 2012 and move my FIM 2010 databases over it by restoring the backups. but as per the link below it seems not possible!
    http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx

    Hi Shivam,
    Please take a look here: Release Notes for Forefront Identity Manager 2010 R2 SP1.
    In the table you have tasks to upgrade SQL for FIMService and FIMSych.
    FIM Service:
    Upgrade FIM Service servers to FIM 2010 R2 SP1
    Stop FIM Service on all servers
    Backup Database [in case rollback needed]
    Upgrade SQL to SQL Server 2012
    Start FIM Service on all servers
    FIM Synch:
    Upgrade FIM Sync to FIM 2010 R2 SP1
    Stop FIM Sync
    Backup Database [in case rollback needed]
    Upgrade SQL to SQL Server 2012
    Start FIM Sync
    If you are not making in-place upgrade, I would do something like here:
    Stop FIM Services
    Backup the databases at SQL 2008
    Restore backed up databases on SQL 2012
    Make sure SQL Agent Jobs are moved (FIMService)
    Make sure Broker is enabled on FIMService database
    On FIM machines create SQL alias using cliconfg utility. Alias should have the name of "old(sql2008) SQL" and point to new name/instance.
    Start FIM Services - they would use "old" name to connect, but it would be translated to new location. So they would start.
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • FIM2010 R2 SP1 and SCSM 2012

    Hello folks!
    Im setting up a lab environment. I have installed SCSM DW and console, did pritty much what Carol did in this blogpost:
    http://www.wapshere.com/missmiis/installing-reporting-for-fim-r2
    At the stage where Im gonna add FIM Reporting I get a error saying I have to install the KB2561430. This i apparently a hotfix for SCSM 2010 SP1. So, Im not able to install this hotfix in my environment since im running SCSM 2012.. Any ideas ? Im stuck.
    Regards, Remi

    When you install FIM Reporting on a new server that has Service Manager 2012 SP1
    installed, follow these steps:
    Install the FIM 2010 R2 SP1 FIMService component. To do this,
    clear the Reporting check box.
    Upgrade the FIMService installation to build 4.1.3451.0.
    Run the change-mode installation for the FIMService, and then
    add Reporting.
    http://blogs.technet.com/b/steady/archive/2013/06/12/fim-2010-r2-sp1-reporting-failure-scsm-2012-sp1-you-must-apply-patch.aspx
    Cordialement, Best Regards, مع أجمل تحياتي ESSALIFI Mohamed Faiçal [MCT-MCSE]. If your question is answered please mark the response as the answer so that others can benefit.

  • SharePoint Foundation 2013 SP1 for Microsoft Forefront Identity Manager (FIM) 2010 R2 SP1

    For subsequent installation FIM 2010
    R2 SP1, I must create a Web application
    with the classical method of authentication. According to
    Microsoft (http://technet.microsoft.com/en-us/library/jj863242(v=ws.10).aspx),
    it is created using PowerShell the following commands:
    $ AdminCredentials = Get-user domain
    \ contosoAdmin
    • $ adminManagedAccount = New-SPManagedAccount -Credential $ adminCredentials
    • New-SPWebApplication -Name "FIM SharePoint Web Application" -ApplicationPool "FIMAppPool" -AuthenticationMethod "Kerberos" -ApplicationPoolAccount $ adminManagedAccount -Port
    80 -URL http://www.contoso.com
    But these commands do not specify an account for
    Web services applications,
    and services of that applications will run under the account
    under which installed Sharepoint. As a result,
    the Administration Console Sharepoint error occurs:
    the application service account has
    local administrator rights. But it should not
    be.
      I ask for advice on how to solve this problem.

    Where I can found ULS Log and configuration details as well?
    I have errors:
    Accounts used by application pools or service identities are in the local machine Administrators group.
    One or more web applications are configured to use Windows Classic authentication.
    When I create a Web application through the
    web interface, and select
    the account for the application pool and application services
    (see. Screenshot). So I decided
    that the account application services
    become account under which installed
    Sharepoint, which has local administrator rights.
    And the application pool account to the
    administrators group is not included. Therefore,
    the question arises: what kind of account
    reports error :: 
    there is only one Web application (but
    before I create and delete the same):
    New-SpWebApplication
    DisplayName                    Url
    Sharepoint-FIM                
    http://www.contoso.com
    help to solve the error, please.

  • FIM 2010 R2 Sp1, Windows 2008 R2 SP1 and Recycle Bin issues

    Hi,
    We are running FIM 2010 R2 Sp1 (build 4.1.3613.0)
    Also running Windows 2008 R2 Forest and Domain functional level environment. (Windows Server 2008 R2 SP1 on all DCs). The previous Recycle Bin hotfix https://support.microsoft.com/en-us/kb/979214/ fails to install since we are already running WS08 R2 SP1
    on all the DCs.
    During deprovisioning, when a user is deleted from the source HR system, FIM deletes the object from AD, FIM Sync & Portal.
    FIM also manages a FIM Portal group, where membership is assigned manually. This membership is then updated in AD.
    When a user (who is part of this group) is deleted in HR, FIM deletes it from AD, FIM Sync, FIM Portal, FIM also removes user from FIM Portal group. The user is also removed from the AD group (by FIM group object membership attribute flow to AD)
    ...however, on the next AD Export, FIM fails to update the same group and complains about this very same user (CD Error) and lists the user as: CN=username\0ADEL:GUID, CN=Deleted Objects,DC=domain,DC=com
    It appears that there is a problem with FIM and the Recycle Bin again?
    Are there any new Recycle Bin/FIM hotfixes ?
    Thanks,
    SK

    May I suggest you review the following:
    Is the AD MA user account part of the Domain Admins group? If yes, please remove it from this Group
    Verify that the "CN=Deleted Objects" container has not somehow been included in the AD MA OU scope

  • Supported platforms in FIM 2010 R2 Sp1

    I have FIM 2010 R2 Syncronization Server running on Windows 2008R2 OS. The available Galsync connectors that we have are Exchange 2003, 2007 and 2010. The FIM sync server runs on Exchange 2010 environment but in order to fulfill the requirements of establishing
    a connector with Exchange 2007 we followed the reference "http://social.technet.microsoft.com/wiki/contents/articles/3457.fim-how-to-export-to-an-exchange-2007-server-with-synchronization-server-in-an-exchange-2010-domain.aspx"
    to install Exchange 2007 EMC on the FIM Sync server. Now we have a new connector lined up to be added on our FIM server which is running on Exchange 2013 environment. I need to know how can we perform an upgrade from FIM 2010R2 to FIM 2010R2 SP1 without breaking
    the existing configuration especially with the connectors running legacy Exchange (2003 and 2007).
    Jimmy George

    Yes, you can upgrade to SP1 without impacting the legacy connections.
    Thanks, Brian

  • FIM 2010 R2 SP1 Reporting ETL Process for SCSM 2012 R2?

    Hi,
    First question: is FIM 2012 R2 SP1 Reporting supported on System Centre 2012 R2 or only System Centre 2012? I have followed the MS FIM Reporting deployment guide, and everything seems to work, except the ETL process (2nd question below)
    Second question: if it is supported, than how do we get the ETL process defined here (http://technet.microsoft.com/en-us/library/jj133844%28v=ws.10%29.aspx)  to work with these versions? The powershell script provided doesn't work on SC 2012 R2.
    Third question: how do we force the whole process so we can view data in the FIM Reports? as at present there is no data in any of the reports even after I manually ran these SCDW jobs: Extract_dw_SCSMServer, transform.common, load.common
    Thank you,
    DW

    Although it could work, if not officially announced as supported - it is not "officially" supported, so you're deploying it on your own risk and MS won't help you if any problem occurs. Please be aware of that.
    Keep trying

  • SharePoint 2010 Excel Services with SQLserver 2012 cubes

    I have two tier sharepoint 2010 enterprise setup
    1)wfe  and app server
    2) sqlserver
    I also have a sqlserver 2012 which hosts all our BI cubes .
    is it possible to connect excel (office 2010)  to sql 2012 BI and save that in my sharepoint 2010 server  under shared documents and expect it to refresh when aall authenticated users hit " refresh all connections"
    It is not able to hit refresh . I get a " unable to refresh data for  a data connection in this notebook" the following connections fail to refresh.
    Interesting when I do the same this using sql server 2008 r2 BI , everything works fine

    Hi,
    According to your description, my understanding is that the SharePoint 2010 Excel Service cannot work with SQL Server 2012.
    Did you install Service Pack 1 for SharePoint 2010?
    SharePoint 2010 Service Pack 1 is required for SQL Server 2012 PowerPivot for SharePoint features.
    Please check if the Service Pack 1 is installed for SharePoint 2010. If not, please download it from the link below and install it:
    http://www.microsoft.com/en-hk/download/details.aspx?id=26623
    More references:
    http://msdn.microsoft.com/en-us/library/ee210708(v=sql.110).aspx
    http://msdn.microsoft.com/en-us/library/6d61be91-0396-443c-a7f4-02dcf973775e(v=sql.110)
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Proper WSUS+SCUP on SCCM 2012 SP1 with SQL 2012

    Been pulling my hair out a new build.
    System:
    Windows 2012
    SQL 2012 SP1
    WSUS 4.0
    SCUP 2011
    WSUS itself will synch if I set source= Microsoft Update.
    SCCM SUP will synch with if I set source= Microsoft update.
    SCUP will not connect to "update server" in this config.
    SCUP will not connect if I check connect to local update server.  Nor will it when i try to connect to itself as a remote (ie local host or fqdn in Update server screen)
    Now whats weird is if I throw a proxy on my spare machine and aim WSUS and SCUP to use it try SUP to FQDNof SCCM host:8530....I can connect
    The problem is with the proxy in play I cannot download Dell catalogs as it used FTP not HTTP (Adobe will download though)
    Every so often just for fun it will throw "request for principal permission failed.
    Anyone that has this working can you please tell me what you have on each of the SUp. WSUS and SCUP screens

    Try running SCUP as administrator. This is usually necessary when SCUP is installed on the ConfigMgr/WSUS server and UAC is enabled. heres a guide that may help: http://www.youtube.com/watch?v=fyEGWSFWyy0 using Group Policy is the easiest wat to deploy
    the certificates as well.
    Justin Chalfant | Blog: setupconfigmgr.com | SCUP Catalog: patchmypc.net/scup | Please mark as helpful/answer if this resolved your issue

  • FIM 2010 R2 SP1 - Installing CA Modules

    I have a customer with on a CA running on Windows Server 2008 Standard edition - when trying to install the CA modules in as part of a CM deployment I get an error saying "This software requires Microsoft Windows Enterprise or Datacenter Edition".
    I have not been able to find any documentation to explain this limitation;  does anyone have any explanation for this or any experience of installing on a 2008 or 2012 standard edition server?
    If there is no choice but to install on an enterprise or datacentre server, can I install the CA modules onto a subordinate CA (with the root CA still running on a standard server)?
    Thanks

    On Fri, 28 Mar 2014 20:39:55 +0000, cjprescott wrote:
    I have not been able to find any documentation to explain this limitation;  does anyone have any explanation for this or any experience of installing on a 2008 or 2012 standard edition server?
    If there is no choice but to install on an enterprise or datacentre server, can I install the CA modules onto a subordinate CA (with the root CA still running on a standard server)?
    http://technet.microsoft.com/en-us/library/gg418594%28v=ws.10%29.aspx
    Look at the Software requirements for FIM CM Infrastructure table.
    As long as the subordinate CA is the one on which you want FIM CM to manage
    certificates, then yes.
    Paul Adare - FIM CM MVP
    AAAAAA - American Association Against Acronym Abuse Anonymous.

  • Help With SCSM 2012 R2 New Setup

    Hi, I'm new to SCSM and planning on setting up SCSM in our environment. I've got 2 Windows 2012 Servers stood up for me. I've seen the step by step tutorials and all but have a couple questions. So on my first server "SCSM" should I install
    SQL 2012 Standard and Service Manger Management server on this box? Or should I install SQL 2012 Standard on my second server which is "SCSMDW", the Datawarehouse? I'd only like to use 2 Servers if possible. If its best practice to have SQL
    on its own (not on SCSM or SCSMDW) box then that can be done also. Please advise. Thanks in advance.

    Thanks Thomas. Yes I was looking at that guide last night and it looks like I need the 4 computer topology. My last question is do I really need 2 SQL servers? One for the Service Manager Database and one for the Datawarehouse Database? Looking at the diagram here,
    http://technet.microsoft.com/en-us/library/hh495582.aspx,  it has 2 SQL Servers. Could I have one Management server, one Datawarehouse Server, and one SQL to be used for the Service
    Manager database and Datawarehouse database? I'll be going to training soon on this but just trying to get a head start. Thanks again.

  • Installing FIM Reporting in FIM 2010 R2 with SP1

    I tried to install the Reporting component.  I have FIM 2010 R2 with SP1 and SCSM 2012.  I get a error saying I have to install the KB2561430. This is apparently a hotfix for SCSM 2010 SP1. I thought that FIM R2 with SP1 supports SCSM 2012 as written:
    FIM Reporting
    Support for Windows Server 2012 has been added.
    Support for SQL Server 2012 has been added.
    Support for SCSM 2012 has been added.
    http://technet.microsoft.com/en-us/library/jj863246(v=ws.10).aspx
    Is there anything I need to install in the SCSM side?
    I'm stuck here

    Hi,
    Even I am running into the same issue. And installing FIM 2010 R2 SP1 Reporting [SCSM 2012 successfully installed].
    Both Wizard and Command line failing.
    Command line captures below error: Did any one solved this issues? Kindly help
    Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
    Property name = 'SHAREPOINT_URL', value = 'http://myurl.
    Property name = 'UILevel', value = '2'.
    CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
    Action ended 0:27:20: INSTALL. Return value 3.
    Aswathy Raj

  • Error Installing FIM Reporting in FIM 2010 R2 with SP1 - SCSM 2012 [CheckFIMWebSiteorSolutionPackExisting]

    I am running into the below issue. I am installing FIM 2010 R2 SP1 Reporting with SCSM 2012 [SCSM successfully installed].
    FIM R2 Reporting installation is failing with both Wizard and Command line.
    Command line captures below error: Can some one help on this?
    Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
    Property name = 'SHAREPOINT_URL', value = 'http://myurl.
    Property name = 'UILevel', value = '2'.
    CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
    Action ended 0:27:20: INSTALL. Return value 3.
    In below link, the above question is unanswered. Kindly help.
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/37b1af85-aef0-422b-9417-7364d51d0df4/installing-fim-reporting-in-fim-2010-r2-with-sp1?forum=systemcenterservicemanager

    Hi All,
    Though we use SCSM 2012, the FIM 2010 Reporting (R2 SP1) installation throws the alert to run
    KB2561430 hotfix (when run throght console) and above error (when run through commnad line).This is actually a bug and MS have fixed that in one of its FIM hotfix rollup. I could move out of the above error by applying the FIM hotfix mentioned
    in the below link.
    http://blogs.technet.com/b/steady/archive/2013/06/12/fim-2010-r2-sp1-reporting-failure-scsm-2012-sp1-you-must-apply-patch.aspx
    Aswathy Raj

  • Reporting Tab is not showing in SCSM 2012 SP1 Console

    I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
    And only the below reporting management pack are available in the Data Ware House >> Management pack area.
    I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
    Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

    At last I solve the problem. THere is 2 solution for resolve the issue.
    Force start all warehouse job.
    Un register and reregistared DataWareHouse againg.
    In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
    Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

Maybe you are looking for