FIM 2010 server license reusing

Hello!
I can't find answer for this simple question.
My customer have FIM Single LicSAPk OLP NL AcademicEdition license. Can I using it in testing environment and run FIM with this license in production after all? Or using trial version will be better way for testing purpose?
Thanks!

What does the license agreement say? Contact your MS license handler straight lay and you'll get better answers than here in the forums..

Similar Messages

Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil Kumar

You really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist

How do I add my Custom Workflow Activity to FIM 2010 R2 SP1 installed on Windows 2012 server?

Hellos.
I have tried and failed to add my custom.dll into the Windows Server 2012 GAC.
We have a version of FIM 2010 R2 Sp1 running on Windows Server 2008 R2 and that was no problem. There seemed to be a gacutil.exe present on the system which added my assembly.
I cannot find gacutil.exe on the Windows 2012 Server.
I have downloaded and installed Windows SDK for Windows 8. However, when I try the gacutil.exe /i <myCustom.dll> nothing seems to happen.
Are there any guidelines how to add custom workflow activities to FIM when installed on a Windows Server 2012 system?
TIA
*HH

Well yes. It is fine when FIM is hosted on Windows Server 2008 R2.My difficulty is that I am using FIM 2010 R2 Sp1 and Windows Server 2012. No GACutility executable.
However, the problem has been resolved. Powershell can be used to modify the assemblies.
I opened a RunAs Administrator PS session. My assembly is in folder c:\Temp
Using Windows Explorer I browsed the folder c:\windows\assembly and noted the System.EnterpriseServices entries: version (2.0.0.0) and public key token (b03f5f7f11d50a3a)
(My version is 2.0.0.0 because when installing FIM and SharePoint 2013 the instructions I used suggested setting .Net version to be 2.0)
These powershell commands got me going...
PS C:\temp> [System.Reflection.Assembly]::Load("System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
GAC Version Location
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50...
PS C:\temp> $publish = New-Object System.EnterpriseServices.Internal.Publish
PS C:\temp> $publish.GacInstall("c:\temp\RunPowershellLibrary.dll")
PS C:\temp>
PS C:\temp>
PS C:\temp> iisreset
Amazingly I can see the assembly RunPowershellLibrary in my Windows 2012 GAC. :-)
Also, what is more cheering is that the custom activity actually works with FIM 2010 R2 Sp1.

Kerberos-no-logon-server in fim 2010

Hi,
When we run Export run profile of ADMA Management Agent then we get fallowing error
kerberos-no-logon-server
and all user that provisioned in AD OU in disabled mode and also taking more time for provisioning.
please provide any solution.
Regards
Anil Kumar

Yes I do - if the fqdn idea still doesn't fix your problem, turn off the Exchange provisioning features of the AD MA and run a post-export PowerShell script to manage your mailboxes. This is the approach we mostly take here @ UNIFY whereby the PowerShell
script is executed by FIM Event Broker - mainly to overcome problems like this.
Bob Bradley (FIMBob @
TheFIMTeam.com) ... now using FIM Event Broker for just-in-time delivery of FIM 2010 policy via the sync engine, and continuous compliance for FIM

FIM Synchronization Server Migration

HI,
In our environment FIM Synchronization Server is used to synchronise the user attributes and creation of mailbox on exchnage server. 4 AD MA are configured to sync the configured to sync the user attributes and rule extension(.net source code) is used
to create a mailbox on exchnage server.
Existing infrastructure:FIM 2010 R2 SP-1 and OS is 2008 and database SQL Server 2008.
We are migrating the existing FIM environment to new plateform windows 2012 and database 2012.
There are two approach as below.Please confirm which will be better and any other points to be taken care.
Approach 1:
1. Create new service account and security groups before new installation.
2. Install the FIM Synchronization server using the new database sql 2012.
3. Export the schema from old FIM environment and import to new environment.
4 Export the all the MA from old environment and import in new environment.
5. Uncheck the deprovision option and check the precedence of attributes.
6. Move the rule extension dll files from old env to new env.
7. Change the service account used in the MA.
8. Run the full import of the 4 AD MA.
9. Run the Full sync of 4 AD MA.
10.RUN the export for 4 AD.
11.Once it works fine, schedule the task scheduler.
Approach 2:
1. Move the old FIM database to new sql server 2012.
2. Install the FIM Synchronization and select option reuse existing database.
3. Uncheck the deprovision option.
4. Move the rule extension dll files from old environment to new server.
5. Run the full import,sync and export profile.
However,I don't know the credentails of old MA, encryption key. So password of the service account can be reset directory on the AD and then reset the password in the configured MA.
Thanks
Harry

Thanks you so much for your response.
I found the encryption key. It was stored on the server.
Now, I can use the this encryption key during the installation of FIM Synchronization Server on the new platform using the new service account and 5 security groups.
Steps are as below.
1.Create new service account and security groups before new installation on AD.
2.Move the old FIM database to new sql server 2012.
3. Install the FIM Synchronization and select option reuse existing database,new service account and use the old encryption key which was taken during the installation time. .
4. Login the Sync console and uncheck the deprovision option.
5. Move the rule extension dll files from old environment to new server.
6. Run the full import,sync and export profile.
Thanks
Harry

GAL Synchronization FIM 2010

currently I have several companies
with exchange 2010 and 2013
want to create a global address list,
my question would be:
1 I have to implement FIM
Server in each of the organizations?
2 I have to purchase a license for FIM
for each organization?
thank you very much

Hello Boris,
you only need one FIM Server and only the SyncService component, so only 1 Server license has to be purchased.
In this FIM server you create one Management Agent for GALSync for each forest you want to sync.
There is a lot of documentation out for this since the good old MIIS times, have a look on this wiki:
GALSync Resources Wiki
Regards
Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Installing Sharepoint Foundation 2013 for FIM 2010 R2 SP-1

Hi,
As SharePoint Foundation 2013 is supported for FIM 2010 R2 sp-1 on windows 2012. I am trying to install the SharePoint foundation 2013 on windows 2012. There are some prerequisite(like .net framework,windows Identity framework, sync, windows
appfabric etc) which needs to be get installed before installing SharePoint 2013. I have installed on the prerequisite sucessfully but when try to install the SP 2013, getting the error, windows server AppFabric is not configured properly. Search
on google and configured the windows server AppFabric many times still getting the same issue. Kindly suggest if it mandatory to configure the AppFabric.If yes, please suggest the correct step to configure the AppFabric.
Error Print screen is as below.
Regards
Harry

Follow these guides to get it working: http://www.harbar.net/articles/fimportal.aspx https://konab.com/using-sharepoint-foundation-2013-with-fim/

Unable to process your request in FIM 2010 R2.

Hi,
Unable to process your request in FIM 2010 R2 sp1 when we hit the URL https://Machinename/Identitymanagerment/default.aspx.
This was working when we installed fresh FIM Synchronization service and FIM 2010 r2 sp1 Portal but now it is not working for me.i have uninstalled FIM 2010 Portal and delete FIMService database and again installed still gives the same message
Unable to process your request .
NOTE:I am implementing FIM 2010 R2 SSPR and gives all reuired cofiguration for this as per Microsoft documents.
Regards
Anil Kumar

I make the changes in the web.config file at location
C:\inetpub\wwwroot\wss\VirtualDirectories\80 on FIM server and added the
requireKerberos=”true” as per the FIM installation
document. Restarted the IIS and reboot the server. After that unable to login on the FIM Portal, However, SharePoint URL is working fine.
Please help me to resolve the issue.
Anil

SQL Features for FIM Synchronization Server

Hi,
As we need to Install the FIM Synchronization server of FIM 2010 R2 SP-1 only. Could you please suggest if all the below sql server features are mandatory to install for FIM synchronization Server.
Database Engine Services
Full-Text Search
Analysis Services
Reporting Services
Business Intelligence Development Studio
Integration Services
Management Tools - Basic
Management Tools - Complete
Thanks
Harry

Hi Harry,
According to
this article, the SQL Server features that are required for a Sync Services installation are the Database Engine Services and (optionally) the Management Tools - Basic.
Cheers,
Tom Houston, UK Identity Management Practice

Supported platforms in FIM 2010 R2 Sp1

I have FIM 2010 R2 Syncronization Server running on Windows 2008R2 OS. The available Galsync connectors that we have are Exchange 2003, 2007 and 2010. The FIM sync server runs on Exchange 2010 environment but in order to fulfill the requirements of establishing
a connector with Exchange 2007 we followed the reference "http://social.technet.microsoft.com/wiki/contents/articles/3457.fim-how-to-export-to-an-exchange-2007-server-with-synchronization-server-in-an-exchange-2010-domain.aspx"
to install Exchange 2007 EMC on the FIM Sync server. Now we have a new connector lined up to be added on our FIM server which is running on Exchange 2013 environment. I need to know how can we perform an upgrade from FIM 2010R2 to FIM 2010R2 SP1 without breaking
the existing configuration especially with the connectors running legacy Exchange (2003 and 2007).
Jimmy George

Yes, you can upgrade to SP1 without impacting the legacy connections.
Thanks, Brian

Server-conn reuse!!!

We have 4 Bluecoats with ACE 4710 to load balance. The ACE is used in Bridge mode.We are using URL hashing.
We were facing internet slowness , we were waiting about 15 secs to get responds on the internet browsers when opening any url ,even the requests were reaching the Bluecoats after 15 secs.
we opened cisco TAC and Cisco engineer asked us to add ""Server-conn reuse"" under the http parameters and this solves the slowness and now the response is very good
But we got another issue after adding this command . Now every 3 or 4 URL requests , the browser asking for authentication. we are using Single sign on with Bluecoats. the authentication even appear with in the same website in the same IE page.
as test we remove the added command " Server-conn reuse " and now the authentication page is not coming but we are facing the slowness again.
I saw in the forums a command to check the reuse , the output from this command as below
BC-LB1/BlueCoat# show np 1 me-stats "-socm -v" | i [uU][sS][eE]
Reuse retrieve link update conn invalid           0             0
Reuse retrieve link update conn not on r          0             0
Reuse retrieve success but conn invalid:       1979             0
Reuse retrieve miss:                        7219215             0
Reuse conns retrieved:                     22304174             0

below the sh run and sh version
BC-LB1/BlueCoat# show ver
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2011 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader:    Version 0.95.1
system:    Version A4(2.1a) [build 3.0(0)A4(2.1a) adbuild_21:41:15-2011/07/21_/auto/adbure_nightly4/renumber/rel_a4_2_1_throttle/R
EL_3_0_0_A4_2_1A]
system image file: (hd0,1)/c4710ace-t1k9-mz.A4_2_1a.bin
Device Manager version 4.2 (0) 20110629:0926
installed license: no feature license is installed
Hardware
cpu info:
    Motherboard:
        number of cpu(s): 2
    Daughtercard:
        number of cpu(s): 16
memory info:
    total: 6226372 kB, free: 4391668 kB
    shared: 0 kB, buffers: 20060 kB, cached 0 kB
cf info:
    filesystem: /dev/hdb2
    total: 861668 kB, used: 550688 kB, available: 267208 kB
last boot reason: Unknown
configuration register: 0x1
BC-LB1 kernel uptime is 27 days 19 hours 3 minute(s) 14 second(s)
BC-LB1/BlueCoat# sho run
Generating configuration....
logging timestamp
logging trap 5
logging buffered 7
access-list HTTPMontor line 8 extended permit tcp host 193.188.163.194 any eq www
access-list HTTPMontor line 16 extended permit tcp any eq www host 193.188.163.194
access-list ICMP line 5 extended permit icmp any any
access-list ICMP line 10 extended permit ip any any
probe http BC_80
description *** Probe for WWW health monitoring ***
port 80
interval 5
faildetect 2
passdetect interval 60
passdetect count 2
receive 3
request method head
expect status 200 401
open 1
probe icmp ICMP_PROBE1
description *** Probe for icmp health monitoring ***
interval 5
faildetect 2
passdetect interval 60
passdetect count 2
receive 3
rserver host KOC-BC-1
ip address 10.100.210.205
inservice
rserver host KOC-BC-2
ip address 10.100.210.206
inservice
rserver host KOC-BC-3
ip address 10.100.210.207
inservice
rserver host KOC-BC-4
ip address 10.100.210.208
inservice
serverfarm host BC_SF
description * BlueCoat server farm
predictor hash header Host
probe ICMP_PROBE1
rserver KOC-BC-1
    inservice
rserver KOC-BC-2
    inservice
rserver KOC-BC-3
    inservice
rserver KOC-BC-4
    inservice
serverfarm host BC_SF_none_http
probe ICMP_PROBE1
rserver KOC-BC-1
    inservice
rserver KOC-BC-2
    inservice
rserver KOC-BC-3
    inservice
rserver KOC-BC-4
    inservice
serverfarm host TOPHITsFarm
rserver KOC-BC-4
    inservice
parameter-map type http pm_http
case-insensitive
persistence-rebalance
set header-maxparse-length 8192
length-exceed continue
parsing non-strict
sticky ip-netmask 255.255.255.0 address source IPSourceSticky
timeout 480
timeout activeconns
serverfarm BC_SF
sticky ip-netmask 255.255.255.0 address source IPSourceSticky_none_http
timeout 480
replicate sticky
serverfarm BC_SF_none_http
class-map match-all BC_VIP
2 match virtual-address 10.100.210.209 tcp eq www
class-map match-all BC_VIP8080
2 match virtual-address 10.100.210.209 tcp eq 8080
class-map match-all BC_VIPftp20
2 match virtual-address 10.100.210.209 tcp eq ftp-data
class-map match-all BC_VIPftp21
2 match virtual-address 10.100.210.209 tcp eq ftp
class-map match-all BC_VIPhttps
2 match virtual-address 10.100.210.209 tcp eq https
class-map type http loadbalance match-any Class-All
2 match source-address 0.0.0.0 0.0.0.0
class-map type http loadbalance match-any NBK
2 match http url /WOLWebUI/*
class-map type http loadbalance match-any TOPHITS
10 match http header Host header-value ".*youtube.com"
20 match http header Host header-value ".*athenaonline.com"
class-map type management match-any mgmt-cm
2 match protocol http source-address 193.188.163.194 255.255.255.255
3 match protocol icmp source-address 193.188.163.194 255.255.255.255
4 match protocol https source-address 193.188.163.194 255.255.255.255
5 match protocol ssh source-address 193.188.163.194 255.255.255.255
6 match protocol telnet source-address 193.188.163.194 255.255.255.255
7 match protocol http source-address 193.188.163.193 255.255.255.255
8 match protocol https source-address 193.188.163.193 255.255.255.255
9 match protocol icmp source-address 193.188.163.193 255.255.255.255
10 match protocol ssh source-address 193.188.163.193 255.255.255.255
11 match protocol telnet source-address 193.188.163.193 255.255.255.255
12 match protocol snmp source-address 10.1.206.20 255.255.255.255
policy-map type management first-match mgmt-pm
class mgmt-cm
    permit
policy-map type loadbalance first-match BC_VIP-l7slb
class class-default
    serverfarm BC_SF
policy-map type loadbalance first-match BC_VIP8080-l7slb
class class-default
    serverfarm BC_SF
policy-map type loadbalance first-match BC_VIPftp20-l7slb
class class-default
    sticky-serverfarm IPSourceSticky
policy-map type loadbalance first-match BC_VIPftp21-l7slb
class class-default
    serverfarm BC_SF_none_http
policy-map type loadbalance first-match BC_VIPhttps-l7slb
class class-default
    sticky-serverfarm IPSourceSticky_none_http
policy-map multi-match int209
class BC_VIP
    loadbalance vip inservice
    loadbalance policy BC_VIP-l7slb
    loadbalance vip icmp-reply active
    appl-parameter http advanced-options pm_http
class BC_VIPhttps
    loadbalance vip inservice
    loadbalance policy BC_VIPhttps-l7slb
    loadbalance vip icmp-reply active
class BC_VIPftp21
    loadbalance vip inservice
    loadbalance policy BC_VIPftp21-l7slb
    loadbalance vip icmp-reply active
    inspect ftp
class BC_VIP8080
    loadbalance vip inservice
    loadbalance policy BC_VIP-l7slb
    loadbalance vip icmp-reply active
    appl-parameter http advanced-options pm_http
interface vlan 210
description " Web client side"
bridge-group 125
mac-sticky enable
access-group input ICMP
access-group output ICMP
service-policy input mgmt-pm
service-policy input int209
no shutdown
interface vlan 211
description "BC server side"
bridge-group 125
mac-sticky enable
access-group input ICMP
access-group output ICMP
no shutdown
interface bvi 125
ip address 10.100.210.214 255.255.255.0
alias 10.100.210.15 255.255.255.0
peer ip address 10.100.210.216 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 10.100.210.1

Upgrade FIM 2010 R2 Sp1 Databases from SQL 2008 R2 to SQL 2012

Hi,
I want to upgrade my SQL from 2008 R2 to SQL 2012.
FIM Databases
1) FIMService Database
2) FIMSynchronizationService Database
Mentioned above are my FIM databases running on SQL server 2008 R2 . Now I was looking for some article which could tell me if SQL can be upgraded without affecting my existing databases of FIM or if i can move these databases to a new server having SQL
2012
Activity I want to perform : Create a fresh Server of SQL 2012 and move my FIM 2010 databases over it by restoring the backups. but as per the link below it seems not possible!
http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx

Hi Shivam,
Please take a look here: Release Notes for Forefront Identity Manager 2010 R2 SP1.
In the table you have tasks to upgrade SQL for FIMService and FIMSych.
FIM Service:
Upgrade FIM Service servers to FIM 2010 R2 SP1
Stop FIM Service on all servers
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Service on all servers
FIM Synch:
Upgrade FIM Sync to FIM 2010 R2 SP1
Stop FIM Sync
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Sync
If you are not making in-place upgrade, I would do something like here:
Stop FIM Services
Backup the databases at SQL 2008
Restore backed up databases on SQL 2012
Make sure SQL Agent Jobs are moved (FIMService)
Make sure Broker is enabled on FIMService database
On FIM machines create SQL alias using cliconfg utility. Alias should have the name of "old(sql2008) SQL" and point to new name/instance.
Start FIM Services - they would use "old" name to connect, but it would be translated to new location. So they would start.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

FIM 2010 Reporting installation reinstalls FIM portal

Hi,
We have FIM 2010 R2 running in production environment. We have added some of our custom developed sharepoint forms inside FIM's sharepoint site to enhance the User Interface.
We now want to deploy FIM reporting feature. But, the installer of FIM re-installs the FIM portal along with installing reporting feature. After reporting feature installation wizard completes, we see that all our customized sharepoint pages are lost and
default FIM web portal appears again.
Is there any method of installing reporting feature withou reinstalling FIM portal?
Mayank Vaish

I would start with the IIS Bindings -- to which IPs and names is the Password Registration Portal bound?
Try to access the site directly. It could simply be that the link is incorrect. The link is stored on the FIM Portal server in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Forefront Identity Manager\2010\Portal and look at the value of
RegistrationPortalUrl
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Installing FIM Reporting in FIM 2010 R2 with SP1

I tried to install the Reporting component. I have FIM 2010 R2 with SP1 and SCSM 2012. I get a error saying I have to install the KB2561430. This is apparently a hotfix for SCSM 2010 SP1. I thought that FIM R2 with SP1 supports SCSM 2012 as written:
FIM Reporting
Support for Windows Server 2012 has been added.
Support for SQL Server 2012 has been added.
Support for SCSM 2012 has been added.
http://technet.microsoft.com/en-us/library/jj863246(v=ws.10).aspx
Is there anything I need to install in the SCSM side?
I'm stuck here

Hi,
Even I am running into the same issue. And installing FIM 2010 R2 SP1 Reporting [SCSM 2012 successfully installed].
Both Wizard and Command line failing.
Command line captures below error: Did any one solved this issues? Kindly help
Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
Property name = 'SHAREPOINT_URL', value = 'http://myurl.
Property name = 'UILevel', value = '2'.
CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
Action ended 0:27:20: INSTALL. Return value 3.
Aswathy Raj

ILM to FIM 2010 Migration.

Hello All,
We are planning to upgrade ILM 2007 to FIM 2010 and plan is to use existing ILM database.
--Restore it to the new DB server with the name “FIMSynchronizationService”,
--Install FIM Sync, telling it to use the restored DB, and providing the encryption keys,
This is will be my first time upgrading from ILM to FIM 2010, I have done previously couple of new FIM 2010 installation and upgrade it FIM 2010 R2 with the encryption key.
As ILM and FIM 2010 ,the platform requirement is quite different and inplace upgrade is not possible, so we are planning to build a new server for FIM rather than in place upgrade.
I never show FIM 2010 ask for encryption key in new installation in a new server. As we are planning to use the existing database , I need guidance how can i use the encryption key of ILM
while upgrading to FIM 2010.
Kindly share your thought.
Regards,
Raja Village

Hi Raja,
The process is pretty much the same as installing second server of FIM in Active-passive environment. So during installation you just have to pick "Use existing database". And, at the end of the installation, you would be asked to provide key file
with a standard "Browse" key. So it is nothing unusual or hard.
Of course make sure you have such key exported before installing new server :)
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

FIM 2010 server license reusing

Similar Messages

Maybe you are looking for