FIM Reporting ETLScript PowerShell Script for SCSM 2012?

Hi,
The FIM Reporting Deployment Guide is great, however on a few occasions it forgets to mention where you meant to execute things (http://technet.microsoft.com/en-us/library/jj133855(v=ws.10).aspx) .
For example, if it wasn't for the screenshot in the article, we would not have known that we need to run the ETLScript from the FIM Service/Portal server.
Everything until the ETLScript has thus far worked; and we have deployed the Service Manager 2012 console on the FIM Service/Portal server (since we are using SCSM 2012 for FIM Reporting).
However, it appears that the ETLScript (in the deployment guide) has been written for SCSM 2010.
So, has Microsoft or anyone published an updated SCSM 2012 ETLScript script?
Thanks,
SK

Could this be it?
http://gallery.technet.microsoft.com/PowerShell-Script-to-Run-a4a2081c

Similar Messages

Executing a powershell script for checking duplicate users while creating a AD user throug ADUC console.

Hi,
I have a text file in which some SamAccountNames are present.I need to check the file while creating a new users through ADUC console.If a username that is going to create through ADUC console is present in the file, then it should prompt a message
that the user is already present in the text file.
Is there any possibility of contacting the powershell script from the ADUC console.If so, then while creating a new user through ADUC console, what is the proceedure for executing that powershell script.
please provide me the approriate solutions.
Thanks
Prasanthi k

Run the below Powershell Script for users are exist or not in AD. Later you can create the users.
#Find Users exist in AD or Not?
#Biswajit Biswas
$users = get-content c:\users.txt
foreach ($user in $users) {
$User = Get-ADUser -Filter {(samaccountname -eq $user)}
If ($user -eq $Null) {"User does not exist in AD ($user)" }
Else {"User found in AD ($user)"}
Active Directory Users attributes-Powershell
http://gallery.technet.microsoft.com/scriptcenter/Getting-Users-ALL-7417b71d
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers

Where can I download SDK for SCSM 2012 RTM? (version 7.5.1561.0)

Where can I download the SDK for SCSM 2012 RTM (version 7.5.1561.0)?
I have an older SCSM 2012 system that I'm not sure what SDK is compatible with it.
The reason is that I need to run SMLets on that older version in PowerShell.
Thanks!

Hey
Are you looking for the SDK binaries? They are located in the "SDK binaries" folder in the SCSM installation folder of the Management Server.
Cheers
Marcel
Marcel Zehner // Blog --> http://marcelzehner.ch // Twitter --> @marcelzehner // Business --> http://www.itnetx.ch

Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.

Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initialized

Hi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Powershell script for security groups and users for multiple share folders

Hi scripting team,
I need your help with powershell script for the below queries
1. List out the security groups for more than one server share path and output it to a file ( csv )
For eg.
If the are are two share paths
\\servername\foldermain\folder1
\\servername\foldermain\folder2
So I needs the list of security groups for each share path
And the output needs to be under each any every path.
2. Grab the users belongs to main security groups and it nested groups for more than one security group and listed the users under each and every group. No need to display nested groups. Just users belongs to main group and users under nested.
Your teams help is much appreciated
Thank you.
Thilochana kumararatne

Hi Braham,
Thanks for your quick reply.
Are we able to do this on two stage method
1. grab the security groups from the share paths
if can grab the share path from a separate txt file than copying it to the <your path> location
so i can modify the txt file
once run the script
if can the output like below to a CSV file
\\servername\foldermain\folder1group 1group 2group 3\\servername\foldermain\folder2group 1group 2group 3then i know which groups belongs to which share paththen i can remove the duplicate groups and keep the common groups to grab the users belongs to itso with the second script same as the first copy the security groups to a txt file and the out put as below.what I needs is the users full name and the samaccount name ( user id )group 1user1user2user3
group 2user1user2user3looking forward your help on thisThank you.Thilo

FIM 2010 R2 SP1 Reporting ETL Process for SCSM 2012 R2?

Hi,
First question: is FIM 2012 R2 SP1 Reporting supported on System Centre 2012 R2 or only System Centre 2012? I have followed the MS FIM Reporting deployment guide, and everything seems to work, except the ETL process (2nd question below)
Second question: if it is supported, than how do we get the ETL process defined here (http://technet.microsoft.com/en-us/library/jj133844%28v=ws.10%29.aspx) to work with these versions? The powershell script provided doesn't work on SC 2012 R2.
Third question: how do we force the whole process so we can view data in the FIM Reports? as at present there is no data in any of the reports even after I manually ran these SCDW jobs: Extract_dw_SCSMServer, transform.common, load.common
Thank you,
DW

Although it could work, if not officially announced as supported - it is not "officially" supported, so you're deploying it on your own risk and MS won't help you if any problem occurs. Please be aware of that.
Keep trying

Using Echo Command in PowerShell Script for Configuration Item

Hello All,
Before you tell me to post my PowerShell question to the PowerShell Forum, please know that the PowerShell portion of my task works just fine. It is the SCCM portion of my task that keeps failing, so that is why I am here. To give some background...
There are two servers in our SCCM test environment. Both the SCCM server and SQL DB server are 2012, patched and updated.
Test servers in my Device Collection being used for running Baselines and Reports against are 2008R2 and 2012, patched and updated.
I have created a Configuration Item that checks to see if the FTP Server Role Feature has been installed on a 2008 or 2012 server. To do the check, I am using the following PowerShell script:
(get-windowsfeature -Name Web-Ftp-Server).Installed
When I log into my 2008R2 and 2012 test servers, and run this command directly on the server, it will return a "True" if the FTP Server Role Feature is installed on either server, and a "False" if it is not installed. Basically,
it works as advertised.
When I setup my Configuration Item and then deploy my Baseline, or run a report against my device collection of test servers, SCCM will return a correct response (True or False) for the 2012 test server, but throws the following error for the 2008R2
server:
0x87df00329 application requirement evaluation or detection failed
Google searches for this have not been very helpful.
Now, when I created the Configuration Item and referenced PowerShell, the configuration screen has the following note:
"Specify the script to find and return the value to be assessed for compliance on client devices. Use the echo command to return the script value to Configuration Manager."
Since I did not include an echo command in my PowerShell script above, I figured that was my problem, so I did the following:
Logging onto both of my test servers (2008R2 & 2012) I was able to successfully run the following PowerShell commands and get the expected responses of True or False:
(get-windowsfeature -Name Web-Ftp-Server).Installed | echo
(get-windowsfeature -Name Web-Ftp-Server).Installed | write-output (http://technet.microsoft.com/en-us/library/hh849921.aspx)
(get-windowsfeature -Name Web-Ftp-Server).Installed | write-host (http://technet.microsoft.com/en-us/library/ee177031.aspx)
However, when I use any of these PowerShell commands in my Configuration Item, NEITHER of my test servers returns a response to the SCCM server.
When I check the report, both servers show as "Unknown" and when I click on the number 2 (as in 2 servers unknown), the following report page (List of unknown assets for a configuration baseline) has absolutely no data/information at all.
So...I am at a loss.
SCCM tells me to use an echo command to return a script value to Configuration Manager. The PowerShell scripts above, with the various echo related commands, work just fine on the servers themselves, but they return no information when run via SCCM.
What am I missing?
Any help will be appreciated.
Thanks in advance for your time.

Sorry for my ignorance, but I don't understand. (I forgot to mention that I am new at both PowerShell and SCCM.)
After I change the PowerShell script to add the echo/write-output/write-host cmdlet, I open the ConFig Item and "Clear" the PowerShell script and then re-add it. When I do that, it correctly shows the change in the ConFig Item.
Next I open the Baseline, then open the ConFig Item within the Baseline to make sure the change is reflected there as well, which it is.
I then deploy the Baseline to my Device Collection. After that, I run a report against the Baseline and Device Collection and it returns the "Unknown" result.
If I open the PowerShell script and remove the echo/write-output/write-host cmdlet, then go through the rest of the process of updating and reporting, the result it returns changes, showing one server in compliance and the other server out of compliance,
which leads me to think that all changes have taken correctly.
Does that sound right? If I manually deploy the Baseline, is that the same as the client retrieving policies from the management point?
Sorry to be so thick but I'm learning as I go.
Thanks again for your help.

Maintainence Mode script for SCOM 2012

Hi All
Currently we use PowerShell script to place servers in maintenance mode (SCOM 2007 ). While executing the script we specify a text file which contains list of agents.
Am looking for same type of script which can work for SCOM 2012. After searching I got the MM tool for placing agent or group in Maintenance. Instead I would need the script to get agents from text file. Also it should check if agent is part of
cluster and place related cluster also in MM.
Let me know , if any one can help me here.
Regards
Madhavi

Hi,
The below two links should be helpful for you, please go through them:
SCOM 2012: Put Cluster Node and Cluster Object in Maintenance Mode
OpsMgr 2012: Group Maintenance Mode via PowerShell (the way it should be)
http://www.systemcentercentral.com/opsmgr-2012-group-maintenance-mode-via-powershell-the-way-it-should-be/
Please Note: Since site is not hosted by Microsoft, the link may change without notice. Microsoft does
not guarantee the accuracy of this information the web.
Regards,
Yan Li
Regards, Yan Li

Powershell script for mailbox permissions

Hello,
Part of my tasks as an Exchange admin is to give access to shared mailboxes. The access usually are:
Send AS
Receive As
Send on Behalf Of
Full mailbox
Is there a powershell script out there that does all of the above?
thanks,
Alexis

Hi,
Probably not prewritten, but you can check the repository for starters:
http://gallery.technet.microsoft.com/scriptcenter
EDIT: I should mention - this isn't too hard to write, so this could be a good opportunity to learn how to get around in the EMS.
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Powershell script for deleting sitecollection and its content db

want to know whether any powershell script is avlble for deleting the sitecollection and its content db at oneshot!
i have created sitecollection specific content db and i wanna delete the same.

Hi,
Below link will help to delete site collection
http://technet.microsoft.com/en-us/library/cc262392(v=office.15).aspx
Thanks
Somnath Matere

Cisco UT Lite script for windows 2012

Hi;
Will Cisco UT Lite script (for Prime LMS 4.2.4) will support with windows Active directory and domain controller on Windows 2012?
If yes can you please share Link, I try to search but unfortunitly I counldn't found. All document refere till Windows 2003.
Thanks for your cooperation.
Best regards;
Shoaib

Hi Shoaib,
there is no workaround. utlite script is supported on below platform only.
•Windows 2008
•Windows XP with SP2 or SP3
•Windows Vista
Thanks-
Afroz
[Do rate the useful post]

Powershell script for removing some users from a particular Site Collection

Hi,
I am looking for a PowerShell script to delete a few users from a particular Site Collection. I am unable to delete them from/_catalogs/Users/simple.aspx page therefore need some other medium to
delete users from the site collection.
My ultimate aim is to have no user profile with "tp_deleted" field's value as 0 in the USERINFO table. Currently there are about 40 odd users with this field's value as 0 and this is affecting my crawling of this content database.

Thanks for the reply Alex & eHaze,
I have a content source of root site which crawls all the site collections under it. Out of the 9 site collections, only 8 are getting crawled and 1 doesn't get crawled at all. The error in the crawl logs is
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: Value does not fall within the expected range. )
I tried a lot of things, searched over the net and finally found
this which helped me solve the same issue in my development environment. I deleted these users from userInfo table and ran a full crawl. And the issue was fixed.
Now since I cannot delete the users from userInfo table directly from PROD environment, I used .../_catalogs/Users/simple.aspx list
to delete users from this site collection. While some of the users I could delete, quite a few I could not. Clicking on the profile redirected me to the home page rather than the info page of the profile.
This
is why I have to delete these users from the site collection.
Alex - the link you shared, I guess it is for a web application level.
eHaze - the script you shared throws this error:
Get-SPSite : Cannot find an SPSite object with Id or Url: http://dev-apps/divisions/BT. At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:4 char:19
+ $site = get-spsite <<<< $siteURL
+ CategoryInfo : InvalidData: (Microsoft.Share...SPCmdletGetSite:
SPCmdletGetSite) [Get-SPSite], SPCmdletPipeBindException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletGetSite
You cannot call a method on a null-valued expression.
At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:9 char:27
+ $site.SiteUsers.Remove <<<< ($LoginName)
+ CategoryInfo : InvalidOperation: (Remove:String) [], RuntimeExc
eption
+ FullyQualifiedErrorId : InvokeMethodOnNull
hope this info helps.

Powershell script for Use this termset for site navigation in tem store management tool in central admin

can anyone pls point out whats the power shell script for "use this termset for site navigation" in the termstore management tool in my central admin';s manage serv appln-->managed metadata serv appln ->term styore mgmnt tool
i would like to check this "checked" through powershell script
help is appreciated!

Hi,
To check if the term set has been set to be used for site navigation, we need to check the
NavigationTermSet.IsNavigationTermSet property for the term set.
Here is the code example for using PowerShell to get the setting:
$site=Get-SPSite "your site collection URL";
$session = Get-SPTaxonomySession -Site "your site collection URL ";
$termStore = $session.TermStores["Managed Metadata Service"];
$Group = $termStore.Groups[“Group Name”];
$TermSet = $Group.TermSets[“Term Set Name”];
$navTermSet = [Microsoft.SharePoint.Publishing.Navigation.NavigationTermSet]::GetAsResolvedByWeb($termset, $site.RootWeb, "GlobalNavigationTaxonomyProvider");
write-host $navTermSet.IsNavigationTermSet
Best regards.
Thanks
Victoria Xia
TechNet Community Support

SharePoint 2010 Powershell scripting for user profile

Please help to have a powershell script which will provide the details related to user profile service application like:
Number of user profiles:
Number of user properties
Number of Organization properties
Number of Organization profiles
Number of Audiences
Un compiled Audiences
Audience Compilation status
Last compilation time
Synchronization schedule
Santosh sethi

Hi,
If you're looking for prewritten scripts, you can check these two places:
http://gallery.technet.microsoft.com/scriptcenter
http://get-spscripts.com/
You should read this too:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Let us know if you have any specific questions.
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Creating powershell scripts using SCCM 2012 device properties

I am trying to create a PowerShell script that will create a MAB object based on SCCM device properties. This MAB object is needed to reimage over our network.
My goal is to create a task sequence that will utilize these properties and create the MAB object in our AD. This will be the first step in my Task Sequence. This will have to use the SCCM device MAC Addresses property information to populate a
sAMAccount property in my AD object.
Any suggestions on how to start this process?

I am still working on actually getting the full process completed here. I have a script that completes the necessary task of creating an MAB object in our Active Directory. This works from a command line opened on the client machine. When I deploy the script
in a Task Sequence it does not complete. Here is what I am deploying in my task sequence.
%winDir%\System32\windowsPowershell\v1.0\powershell.exe -noprofile -command Set-ExecutionPolicy Bypass LocalMachine -force
%winDir%\System32\windowsPowershell\v1.0\powershell.exe -noexit -command import-module ActiveDirectory -force;MABCreation.ps1 -force;Set-ExecutionPolicy RemoteSigned LocalMachine -force
This errors at the import step everytime. I have created a batch file and used the command line option in the task sequence. I have also tried to Disable 64 bit file redirection option on and off. Any further suggestions?

FIM Reporting ETLScript PowerShell Script for SCSM 2012?

Similar Messages

Maybe you are looking for