FIM Sync service keeps restarting after being disabled

Hi - We are deploying the SharePoint User Profile Store connector and I have followed all the steps here:
http://technet.microsoft.com/en-us/library/dn511003(v=ws.10).aspx
However the FIM Sync service keeps enabling and restarting itself - can't see anything in the event logs except a Evt ID: 2001 - Service was started successfully
What is starting this service? How can I stop so that it remains in the disabled state?
Thanks
J

Hi,
Based on your description, my understanding is that you want to disable the FIM Sync service, but FIM Sync service keeps restarting after being disabled.
I suggest you start the FIM Sync service again and stop it, then disable it.
You shouldn't need to start those services manually - SharePoint will do everything itself when you start the User Profile Sync service in Central Administration.
Restarted the User Profile Synchronization Service in Central Administration.(Central Administration -> System Settings -> Manage services on server -> User Profile Synchronization Service.)
Stop the FIM Sync service and then disable it.
Here are two links, you can use as a reference:
http://serverfault.com/questions/147738/not-able-to-start-forefront-identity-manager-service
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

T400 keeps restarting after being re-imaged with Ghost

I built an XP image with the recovery disks from Lenovo.
Now I'm trying to dump this image on to other T400's that are straight out of the box and after the image is done loading the laptop will just keep restarting.
Please help.
Configuration:
- hard drive is set to ACHI (defualt)
- did a full disk image when dumping down.
I don't get a flashing cursor or error message the laptop will just restart aftee the Lenovo Screen.

ashaikh, welcome to the forum,
how did you create the image? Did you capture the 4 boot blocks using the -IB switch?
There is a tip, a bit old and you can ignore the part about setting the predesktop area to disabled, but it should hopefully help you.
Partition does not boot after being restored with Norton Ghost
The title may also not seem to be 100% relevant. The important part is the -IB switch - See this thread.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Mac keeps restarting after being asleep

Safe mode tried and fine,reinstall and back up completed and yet still getting a restart after screen saver has been activated. I have been onto Apple who are none the wiser after repair disk etc, still no luck!
Please help!?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

HT204003 how do I permanently delete a pass from my passbook account? (It keeps reappearing after being deleted.)

I have a pass in passbook that keeps reappearing after being deleted. It pops up (location sensitive) despite the fact that I have disabled the location services, repeatedly. I need to permanently delete it.

Hi, sophiaskoub.
Thank you for the question. The most common cause for this is having Automatic Downloads enabled on the secondary computer. See the first article on how to disable this feature. The other attached articles cover how to delete media from iTunes and hiding any purchases that have been made.
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
Deleting files from the iTunes library and your computer
http://support.apple.com/kb/ht3842
iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/ht4919
Cheers,
Jason H.

Computer keeps restarting after installing windows 8

Can you help my computer keeps restarting after I installed Windows 8? I have the minidump file zipped

We do need the actual DMP file as it contains the only record of the sequence of events leading up
to the crash, what drivers were loaded, and what was responsible.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
(Instructions for XP, Vista, Win 7, Win 8)
System specs are often useful so include whatever you know
Dyami & Wanikiya ...Team ZigZag.

I have just restored my ipod touch after being disabled. Now it is asking for pasword, can I cancel this so I don't have to use a password?

I have just restored my ipod touch after being disabled. Now it is asking for the passcode? I still cant remember the passcode. How do I go past this?

You'll have connect in recovery mode and set it up "as new ipod" http://support.apple.com/kb/HT1808
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document.
copied from http://support.apple.com/kb/HT1212

Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds.

Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds. I have used itunes to restore and also recover. Device will actually shut off and stay shut off if I leave it connected to the computer. The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not. Just cant get it to completely shut down unplugged. Any thoughts?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
Apple will not help since you worked on the iPod yourself.

Malicious TornTV add-on continously returning after being disabled- How do I fix this?

I've been having issues with an add-on to my browser by TornTV that continuously returns after being disabled via the link provided on the ads it invasively opens and via the Add-on Toolbar. I've done the process many times and even sent a formal request to the TornTV website to stop after discovering I cannot remove it permanently only to receive no answer or conclusion.
It wouldn't be such a big issue were these ads not slowing my browser considerably, crashing it entirely, or generally getting under foot while I'm doing work on the internet; I was just hoping that you might perhaps have a solution to this issue.
Thank you very much!

hello, please try to run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] which are specialised in removing adware and browser hijackers.
[[Troubleshoot Firefox issues caused by malware]]

My iPhone 6 keep restarting after I open a few apps!!!!!

My iPhone 6 keep restarting after I open a few apps!!! Sometimes during a call

Hi kaiserleung,
Thank you for using Apple Support Communities.
Please see the information in the article below on troubleshooting this issue where your iPhone is unexpectedly restarting.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Cheers,
Alex H.

Iphone keep restarting after 60 seconds

I need help for iphone keep restarting after 60 seconds, when I update ios 5.0.1 (9A405), how to overcome these problems

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it back to factory settings would be the next step:
Use iTunes to restore your iOS device to factory settings - Apple Support

Finder froze, restarted. Now keeps restarting after boot.

Hi!
The title pretty says it all.
Finder froze completly, and I forced a restart. After the restart it keeps restarting AFTER boot. By that I mean after getting into the desktop.
Any ideas?
Tried a few things my self, but it just keeps restarting..
Got a Mac mini, can the macbook somehow boot from that? I just need the data from the harddrive!

I could not find anything the direction I was going. OK, you can start from your DVD. What happens if you just click install? If you are able to install, then your would be installing Sno over Sno, as if doing an upgrade install, in an attempt to fix your Sno installation. In principle, your files, users, apps, and settings would not be affected. But,before trying this sort of install, you will need to resolve the issue of what sort of backup you have. Most importantly you may have important unbacked up files. If so, then you might be better off going to a data recovery specialist before trying to reinstall Sno over Sno.

My iPod was restored after being disabled. I am trying to sign into iCloud to load my back-up on the iPod. I can't sign in because the sign-in always times out. Why is this?

My iPod was restored after being disabled. I am trying to sign into iCloud to load my back-up on the iPod. I can't sign in because the sign-in request always times out. Why is this?

If you do not have access to the primary email of the Apple ID then the only other option to reset the Apple ID password is by the security questions.
- go to https://appleid.apple.com
- select Reset your password
- enter the Apple ID email and press next
- select Answer Security Questions

My iphone 4 keeps restarting after i changed the battery

my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

Mac Pro Mid 2010 keeps restarting after installing OSX Mavericks

Hello,
my Mac Pro Mid 2010 started quitting and restarting after installing the Mavericks OSX. I was thinking about wiping out the drive and reinstalling OS X Mountain Lion but thought I should see if anyone else is experiencing these issues before going that route.
It just intermittently restarts and it tries to restart multiple times before it will actually start up again. It's not issuing a crash report. It just quits out and restarts. It started doing this just at initial startup. It now will quit and restart at any given time and it will take multiple times attempting to start before it actually starts up. I've even had to shut it down because it would going through that startup sequence without starting. No perceivable pattern as to why this is occurring. No specific programs that it occurs in. The only thing I know for certain is that it started happening after installing Mavericks OSX – OSX Mountain Lion was fine. I also made sure to unistall Mountain Lion before installing Mavericks with those potential issues of trying to install one operating system over another. Any thoughts would be appreciated.
Specs for Mac Pro Mid 2010:
- 2 x 2.66 GHz 6-Core Intel Xeon
- 14 GB 1333 MHz DDR3 ECC
- ATI Radeon HD 5770 1024 MB
- OS X 10.9.2

Hello Linc,
I followed your instructions. I have information for the BOOT_TIME and for SYSTEM DIAGNOSTICS sections. I've included all within one post with heading separators between the two sections. I wasn't sure if you needed this posted as two separate posts or not. If this isn't correct, please let me know and I'll do again. Hopefully I didn't pull too much content for the BOOT_TIME section. I was trying to search for enough diverse content that would clearly represent what might be occurring. It was also challenging to choose content for the BOOT_TIME section though because there was no time-stamped content close to the time of BOOT_TIME time stamp. The last time I restarted my system was hours before I attempted your exercise. And, I haven't experienced "crashing" more than it just automatically restarts in the middle of things. I wonder if that's why there were no .crash reports? There was only a list of .panic reports so that's what I provided. Thanks for your help Linc.
STEP 1 - BOOT_TIME:
8/12/14 1:58:29.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 1:58:46.987 PM WindowServer[104]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 1:58:54.698 PM DMProxy[194]: CGSServiceForDisplayNumber: Invalid display 0x2b2840d0
8/12/14 2:00:51.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:00:51.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit - remaining messages this second discarded ***
8/12/14 2:01:04.666 PM WindowServer[120]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 2:01:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=254[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
8/12/14 2:01:13.811 PM WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
8/12/14 2:01:20.859 PM NotificationCenter[243]: Failed to mmap file. The file has zero length.
8/12/14 2:01:23.997 PM com.apple.audio.DriverHelper[279]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
8/12/14 2:01:27.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:15:33.763 PM quicklookd[2724]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
8/12/14 2:15:39.000 PM kernel[0]: Sandbox: coreaudiod(264) deny file-read-metadata /Library/Audio/Plug-Ins/Components/UVIWorkstationAU.component
8/12/14 2:42:17.839 PM QuickLookUIHelper[2874]: *** Throwing exception err=-536870174 type=3 PlugInDevice.cpp line 81
8/12/14 2:42:17.851 PM sandboxd[145]: ([2874]) QuickLookUIHelpe(2874) deny iokit-open com_motu_driver_PCIAudio_UC
8/12/14 2:53:26.000 PM kernel[0]: firefox (map: 0xffffff803dc844b0) triggered DYLD shared region unnest for map: 0xffffff803dc844b0, region 0x7fff91200000->0x7fff91400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
8/12/14 2:55:19.376 PM plugin-container[2917]: Just logged in, send prefs down to 0 drivers
8/12/14 2:55:19.376 PM plugin-container[2917]: Adding ConsoleUID 501 to dictionary
8/12/14 2:55:21.182 PM plugin-container[2917]: CoreText performance note: Client called CTFontCreateWithName() using name "Myriad Pro" and got font with PostScript name "MyriadPro-Regular". For best performance, only use PostScript names when calling this API.
8/12/14 2:55:32.503 PM com.apple.launchd.peruser.501[200]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 10 seconds
8/12/14 2:55:32.960 PM plugin-container[2917]: PlugInDevice::~PlugInDevice
8/12/14 2:55:33.790 PM WindowServer[120]: CGXGetConnectionProperty: Invalid connection 63027
8/12/14 2:55:33.807 PM com.apple.launchd[1]: (com.apple.MailServiceAgent[2714]) Exited: Killed: 9
8/12/14 2:55:33.812 PM loginwindow[80]: ERROR | -[Application setAppContext:] | Unable to get PID for context [0,118813]
8/12/14 2:55:33.814 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[282]) Exited: Killed: 9
8/12/14 2:55:33.816 PM com.apple.launchd.peruser.501[200]: ([0x0-0x27027].com.apple.AppleSpell[2673]) Exited: Killed: 9
8/12/14 2:55:33.886 PM Core Sync[373]: NSDistantObject (0x1088026a0) is invalid (no connection)
8/12/14 2:55:34.305 PM sessionlogoutd[2929]: sessionlogoutd Launched
8/12/14 2:55:34.314 PM sessionlogoutd[2929]: DEAD_PROCESS: 80 console
8/12/14 2:55:34.335 PM fseventsd[86]: Events arrived for /Volumes/Mac OS X Install ESD after an unmount request! Re-initializing.
8/12/14 2:55:34.335 PM fseventsd[86]: creating a dls for /Volumes/Mac OS X Install ESD but it already has one...
8/12/14 2:55:34.612 PM shutdown[2930]: halt by _coreaudiod:
8/12/14 2:55:34.000 PM kernel[0]: Kext loading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext unloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext autounloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kernel requests now disabled.
8/12/14 2:55:34.612 PM shutdown[2930]: SHUTDOWN_TIME: 1407880534 611700
8/12/14 2:55:34.625 PM Creative Cloud[252]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
8/12/14 7:30:33.000 PM bootlog[0]: BOOT_TIME 1407897033 0
STEP 2 - SYSTEM DIAGNOSTIC REPORT:
Tue Aug 12 19:30:48 2014
panic(cpu 0 caller 0xffffff801f8dc24e): Kernel trap at 0xffffff801fc51e48, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff803f930ec0, CR3: 0x0000000022630000, CR4: 0x00000000000206e0
RAX: 0xffffff803ebc9f80, RBX: 0x0000000000000070, RCX: 0xffffff801ff034d0, RDX: 0xffffff803f915588
RSP: 0xffffff81c98d3c10, RBP: 0xffffff81c98d3c40, RSI: 0x0000000000010002, RDI: 0x0000000000000001
R8: 0x0000000000000000, R9: 0x0000000000000039, R10: 0xffffff801ff03770, R11: 0x0000007e3672c41b
R12: 0xffffff801ff034d0, R13: 0xffffff803f8dc2c0, R14: 0xffffff803f915580, R15: 0xffffff803f930ec0
RFL: 0x0000000000010286, RIP: 0xffffff801fc51e48, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff803f930ec0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81c98d38a0 : 0xffffff801f822f79
0xffffff81c98d3920 : 0xffffff801f8dc24e
0xffffff81c98d3af0 : 0xffffff801f8f3746
0xffffff81c98d3b10 : 0xffffff801fc51e48
0xffffff81c98d3c40 : 0xffffff801fc8bffe
0xffffff81c98d3c80 : 0xffffff801fc8c1fd
0xffffff81c98d3cb0 : 0xffffff7fa01e49aa
0xffffff81c98d3ce0 : 0xffffff7fa01e48dc
0xffffff81c98d3d10 : 0xffffff7fa0144068
0xffffff81c98d3d70 : 0xffffff7fa0142c85
0xffffff81c98d3da0 : 0xffffff7fa0141646
0xffffff81c98d3dd0 : 0xffffff7fa01bfc43
0xffffff81c98d3e20 : 0xffffff7fa0140b8b
0xffffff81c98d3e50 : 0xffffff801fc956ef
0xffffff81c98d3ea0 : 0xffffff801fc952af
0xffffff81c98d3f30 : 0xffffff801fc90e89
0xffffff81c98d3f70 : 0xffffff801fc95e03
0xffffff81c98d3fb0 : 0xffffff801f8d7417
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7fa013d000->0xffffff7fa016bfff
            dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7fa012b000
         com.motu.driver.PCIAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffffff7fa 01be000->0xffffff7fa0223fff
            dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7fa013d000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9febe000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x000000001f600000
Kernel text base: 0xffffff801f800000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 26153387208
last loaded kext at 18269508545: com.apple.driver.AppleMikeyHIDDriver    124 (addr 0xffffff7fa10fa000, size 20480)
loaded kexts:
com.Cycling74.driver.Soundflower    1.5.1
com.motu.driver.PCIAudio    1.6 58373
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleMikeyDriver    2.6.3f4
com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
com.apple.driver.AppleHDA    2.6.3f4
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AppleUpstreamUserClient    3.5.13
com.apple.driver.AppleMCCSControl    1.2.5
com.apple.kext.AMDFramebuffer    1.2.4
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
com.apple.AMDRadeonX3000    1.2.4
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleLPC    1.7.0
com.apple.kext.AMD5000Controller    1.2.4
com.apple.driver.AppleIntelMCEReporter    104
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.0
com.apple.iokit.SCSITaskUserClient    3.6.6
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.driver.AppleUSBHub    683.4.0
com.apple.driver.AppleFWOHCI    5.0.2
com.apple.driver.Intel82574L    2.6.2b1
com.apple.driver.AirPort.Brcm4331    700.20.22
com.apple.driver.AppleAHCIPort    3.0.5
com.apple.driver.AppleUSBEHCI    660.4.0
com.apple.driver.AppleUSBUHCI    656.4.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    2.0
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    2.0
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
com.apple.nke.applicationfirewall    153
com.apple.security.quarantine    3
com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
com.apple.driver.DspFuncLib    2.6.3f4
com.apple.vecLib.kext    1.0.0
com.apple.iokit.IOSurface    91.1
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.iokit.IOBluetoothFamily    4.2.6f1
com.apple.iokit.IOAcceleratorFamily    98.22
com.apple.driver.AppleSMBusController    1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
com.apple.driver.AppleHDAController    2.6.3f4
com.apple.iokit.IOHDAFamily    2.6.3f4
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.iokit.IOAudioFamily    1.9.7fc2
com.apple.kext.OSvKernDSPLib    1.14
com.apple.kext.AMDSupport    1.2.4
com.apple.AppleGraphicsDeviceControl    3.6.22
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.driver.AppleSMC    3.1.8
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.7.1d6
com.apple.driver.AppleUSBHIDKeyboard    170.15
com.apple.driver.AppleHIDKeyboard    170.15
com.apple.iokit.IOUSBHIDDriver    660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
com.apple.iokit.IOUSBMassStorageClass    3.6.0
com.apple.driver.AppleUSBMergeNub    650.4.0
com.apple.driver.AppleUSBComposite    656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOUSBUserClient    660.4.2
com.apple.iokit.IO80211Family    640.36
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOAHCIFamily    2.6.5
com.apple.iokit.IOUSBFamily    683.4.0
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    278.11.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.AppleKeyStore    2
com.apple.driver.DiskImages    371.1
com.apple.iokit.IOStorageFamily    1.9
com.apple.iokit.IOReportFamily    23
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    2.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.pthread    1

Iphone keeps restarting after 1 minute

went to bed last night phone was fine woke up this morning and it keeps restarting or freezing after 30 seconds to a minute. i tried re-installing my firmware but no help. does anyone have any ideas?

Standard troubleshooting steps in order are; power the iPhone off/on, reset, restore with iTunes from the iPhone's backup, restore with iTunes as a new iPhone or not from the iPhone's backup.
If no change after these steps, time to give AppleCare a call at (800) 694-7466, or make an appointment at an Apple store if there is one nearby.

FIM Sync service keeps restarting after being disabled

Similar Messages

Maybe you are looking for