FIM Synchronization Server Migration
HI,
In our environment FIM Synchronization Server is used to synchronise the user attributes and creation of mailbox on exchnage server. 4 AD MA are configured to sync the configured to sync the user attributes and rule extension(.net source code) is used
to create a mailbox on exchnage server.
Existing infrastructure:FIM 2010 R2 SP-1 and OS is 2008 and database SQL Server 2008.
We are migrating the existing FIM environment to new plateform windows 2012 and database 2012.
There are two approach as below.Please confirm which will be better and any other points to be taken care.
Approach 1:
1. Create new service account and security groups before new installation.
2. Install the FIM Synchronization server using the new database sql 2012.
3. Export the schema from old FIM environment and import to new environment.
4 Export the all the MA from old environment and import in new environment.
5. Uncheck the deprovision option and check the precedence of attributes.
6. Move the rule extension dll files from old env to new env.
7. Change the service account used in the MA.
8. Run the full import of the 4 AD MA.
9. Run the Full sync of 4 AD MA.
10.RUN the export for 4 AD.
11.Once it works fine, schedule the task scheduler.
Approach 2:
1. Move the old FIM database to new sql server 2012.
2. Install the FIM Synchronization and select option reuse existing database.
3. Uncheck the deprovision option.
4. Move the rule extension dll files from old environment to new server.
5. Run the full import,sync and export profile.
However,I don't know the credentails of old MA, encryption key. So password of the service account can be reset directory on the AD and then reset the password in the configured MA.
Thanks
Harry
Thanks you so much for your response.
I found the encryption key. It was stored on the server.
Now, I can use the this encryption key during the installation of FIM Synchronization Server on the new platform using the new service account and 5 security groups.
Steps are as below.
1.Create new service account and security groups before new installation on AD.
2.Move the old FIM database to new sql server 2012.
3. Install the FIM Synchronization and select option reuse existing database,new service account and use the old encryption key which was taken during the installation time. .
4. Login the Sync console and uncheck the deprovision option.
5. Move the rule extension dll files from old environment to new server.
6. Run the full import,sync and export profile.
Thanks
Harry
Similar Messages
-
SQL Features for FIM Synchronization Server
Hi,
As we need to Install the FIM Synchronization server of FIM 2010 R2 SP-1 only. Could you please suggest if all the below sql server features are mandatory to install for FIM synchronization Server.
Database Engine Services
Full-Text Search
Analysis Services
Reporting Services
Business Intelligence Development Studio
Integration Services
Management Tools - Basic
Management Tools - Complete
Thanks
HarryHi Harry,
According to
this article, the SQL Server features that are required for a Sync Services installation are the Database Engine Services and (optionally) the Management Tools - Basic.
Cheers,
Tom Houston, UK Identity Management Practice -
File server migration with Offline files involved
Hi,
We are planning a file server migration in following weeks.
This morning, our customer came with the good old "Ow, and I just thought about something else"
Here's the scenario :
-They are using 1 network drive
-That network drive is made offline available for all laptop users
-Those users are spread out in several country's. No VPN connection
-They are working for months on their offline network drive, right in the middle of the wood, no internet connection, it was already short for them to find power supply for their laptop ...
...nevermind
-The day they come back to the office, the file server to which points the network drives will be offline.
Now the 1 Million question : What happens with their "dirty" files ?
yep exactly. those they changed 6 months ago, have no clue about if you ask them but certainly will the day I will clear the damn cache.
My first analysis :
-The new file server will have another name, no alias or re-using the old name is possible (the customer don't want to)
-I can't tell to those laptops "hey for that offline cache, please use this new network drive"
So :
>> Those users have to identify manually files they changed while being offline, copy them locally on their machine and work that way the time they come back to the main office.
>> When they finally show up, clear the cache, offline the new network drive and replace file copied locally
>> If no internet connexion available in the branch office, let them work locally, it's still better than this hybrid-non-sense 6month offline folder "solution". If internet connexion is mainly available remotely, propose some Citrix/View/RDS
Setup which is, for me, a more professional looking solution
Someone has another (better?) idea/solution ?Hi,
I suggest you ask users to collect their laptop to internet, then start offline files synchronization on the old file server. After that, use
Robocopy to copy the date from the old server to the new server. As the offline files cache cannot be recognized by the new file server, so we need to synchronize data first.
If the older server cannot be enabled, as you mentioned, you might need to ask users to copy their changed files to the new file servers.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error 25009 Install FIM Synchronization
Hello,
i try to install FIM Sync and i have a remote sql server but i have this error
Product: Forefront Identity Manager Synchronization Service -- Error 25009.The Forefront Identity Manager Synchronization Service setup wizard cannot configure the specified database. OLEDB Provider Information:
Description = 'Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.'
Failure Code = 0x80004005
Minor Number = 18452
<hr=0x80230406>
Any idea ?
ThanksYes i tried with a domain account but nothing.
Actually the installation of FIM portal is OK but not FIM synchronization !!!
it's ok now, it was an error on permission configuration for fim service account
Hi,
I don't suppose you could please elaborate on which permission configuation error was encountered, and how it was resolved?
I'm running into the same issue while trying to install the FIM sync service component.
Thanks in advance!
Farrell -
FIM Synchronization Repeat Contacts Exchange 2013 and 2010
Hey how are you?
actualemnte story with FIM
Synchronization 2010 R2
I have two organizations:
Oraganizacion 1:
Exchange 2013 S1
FIM Server
organization 2
Exchange 2010 Sp3
contacts organization number two
is possible to see them in organizavion
number one
the downside is trying to sincornizar
repeatedly contacts the organization towards each
organization's number two being
repeated and causes problems with users.
repeated contact:
contact.dominio.com
contact1.dominio.com
contact3.dominico.com
I can do ??Hi Dominik,
thanks for pointing number 2 out :)
For my Problem on the Exchange:
I get the Event ID 12 in the Application log with:
The Forefront Identity Manager Service cannot connect to the Exchange Web Service.
In the FIM Log I find:
System.Web.Services: System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote
host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
This leads me to
http://social.technet.microsoft.com/Forums/en-US/7697048b-3cf1-48ce-a8eb-b5c51104c279/error-connecting-to-exchange-2010?forum=ilm2 . This guy seems to have the same error. But I don't know exactly what he changed in IIS. As a said, my Certificate chain
is OK.
Do you have some resource for me, where to start to get rid of this?
Thanks a lot,
Martin
www.sccmfaq.ch -
Fim portal and fim synchronization
Hello ,
I have two Problems with fim 2010 R2 . First i have installed the synchronization manager , the installation is complete and when i check my Active directory the groups FimSyncAdmins , FimSyncPassword, FimSyncBrowse ... are not created.
The second Problem is with fim portal i can create objects like distribution goups , security groups so i cannot create users . I mean that i create the user but i cannot see that one in fim fim portal . So when i go to "Manage my requests" the
status of the creation is completed but i didnt see that any user that section of users is empty .
Best RegardsHi deldiaze,
First, the installation tools of FIM Synchronization does not create group in AD (If you do not specify domain\groupname during the installation, FIM creates local groups). So check your server's group!
Do you create with the Admin FIM account (the one witch install the FIM portal)?
Try to rebuild the SQL index of the FIMService Database.
Regards,
Sylvain -
BW Steps before and after R3 server migration
Hi Friends,
We are using ECC6 and BW 3.5.
My client is going for R3 server migration, yes it's just a migration of server and not any upgrade. This server is quite old so migrating to a higher end server.
BASIS will do a system copy during downtime i.e. a homogeneous client copy where they would just copy the DB tables. As per them all data will remain same and only the IP will change i.e. i will have to make a change in R3-BW RFC connection.
I need to know what other pre and post migration steps are involved in this case?
Thanks,
BJHi,
I dont think that there would be any impact on queues etc due to server migration. We flush out data from queues only in cases of upgrade/ patch application etc. because there is a chance that after the upgrade the structure of datasource may change. In that case, any data lying in queue beforehand would get corrupted and cannot be loaded.
in your case, there is no such change going to happen, therefore no need to worry about queues. You can go ahead without worrying about any dataloss due to queues. -
Fim Synchronization Error - Event ID : 6801 - How to resolve in existing farm ?
Hello,
My farm was working well since last 1 year for synchronizing user profile ,however for last 1 month it has been stopped as users are not being added/updated.
UPS Account is having replicate directory changing permission
UPS,sync and Firm service are in Running State
FIM and Server has logged following error for multiple users:
Level: Error
Source:
FIMSynchronizationService
Event ID: 6801
Task Category:
Server
Message:
"The extensible extension returned an unsupported error.
The stack trace is:
""System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: Value cannot be null.
Parameter name: strAccountName
at Microsoft.Office.Server.UserProfiles.UserProfileManager.UserExists(String strAccountName)
at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAccountName, Hashtable properties)
at Microsoft.Office.Server.UserProfiles.UserProfileManager.CreateProfileWithBulkProperties(Int64 importExportId, String strAccountName, Hashtable properties)
at Microsoft.Office.Server.UserProfiles.ProfileImportExportService.UpdateWithProfileChangeData(Int64 importExportId, ProfileChangeData[] profileChangeData)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.Office.Server.WebServiceDirectProxy.WebMethodInfo.Invoke(Object webServiceInstance, Object[] args)
at Microsoft.Office.Server.WebServiceDirectProxy.Invoke(String methodName, Object[] args)
at Microsoft.Office.Server.UserProfiles.ManagementAgent.ProfileImportExportDirect.UpdateWithProfileChangeData(Int64 importExportId, ProfileChangeData[] profileChangeData)
at Microsoft.Office.Server.UserProfiles.ManagementAgent.ProfileImportExportExtension.Microsoft.MetadirectoryServices.IMAExtensibleCallExport.ExportEntry(ModificationType modificationType, String[] changedAttributes, CSEntry csentry)
Forefront Identity Manager 4.0.2450.49"""
Would you please let me know the resolution in order to remove above error ?
Thanks and Kind Regards,
Dipti ChhatrapatiHello Dipti,
Re-creating UPA would be the final solution as per my understanding as most of the troubleshooting has already been performed by you.
Personally, i would suggest you take backup of your UPA databases first (Profile, Social and Sync) and then delete the existing sync connection and re create a new one (also take screenshot of every managed property so that we would know which property is connected
to which attribute in AD).
If this doesn't resolve your issue then re-create UPA with the existing database you backed up earlier.
If above mentioned steps doesn't resolve the issue then delete UPA and create a new UPA with OLD profile & Social DB and create a fresh new Sync DB.
If issue still persist then re-create a new UPA with new database and configure everything from scratch.
Note: for all these steps we would require downtime as we might need to clear timer cache or perform IISreset in case we face trouble. Otherwise, this solution doesn't actually require downtime. Also, when we will be troubleshooting on the request users wouldn't
be able to see their profile and tags which they would have already made.
Thank You. -
Calendar Server Migration from iplanet5.2 to Sunjava messaging server
Hi
Can any one help me on Calendar server migration.
How can i migrate the calendar server from iplanet 5.2 to sunjava messaging server
Users
Calendar resources
Groups
AttributesHi,
I assume you mean iplanet calendar server 5.1.1 to the latest calendar server (6.3). If so, I suggest you start by reading through the calendar server admin guide which goes through the steps involved and tools to use to migrate from 5.1.1 onto calendar server 6.3.
http://www.sun.com/bigadmin/hubs/comms/library/manuals.calendar.jsp
Regards,
Shane. -
I'm having a problem setfing up migration on my Managed Servers on Welbogic 9.2 mp2. First, My problem.
When I try to manually migrate ManagedServer1 from MachineA to MachineB:
Nodemanger shutdowns ManagedServer1
Nodemanager removes the interface with the floating IP (so far so good)
(here is where the problem starts)
Nodemanager brings up the interface back on MachineA
Nodemanager starts ManagesServer1 on MachineA (all this is suppose to happen on MachineB).
This doesn't help me if it migrates it to the same machine!!!
I quick overview of how things are set up.
1) I have two machines, MachineA and MachineB running Solaris 10
2) I have the admin server running on MachineA listening on the static ip of 139 and ManagedServer1 listening on the floating IP of 169 (fyi, don't want give out IP, so I made a number up)
3) I have ManagedServer2 running on MachineB with the floating IP of 170.
4) I created a weblogic user that has ssh trust config between the two machines and has the proper authority to create and bring down an interface.
5) Created 2 Unix machines, Type SSH with the shell command ssh -l legalint -o PasswordAuthentication=no -p %P %H /opt/bea/weblogic92/common/bin/wlscontrol.sh -d %D -n /legalint/mtdom/ndmgr -c -f startManagedWebLogic.sh -s %S %C
6) Network Time Protocal Config is set
7) Lease database schema is created with corresponding data source and has two tables ACTIVE and ACTIVE_MT
8) Server migration progerties configured: cluster datasource is set (In my directions it tells me to leave the Canidate machines blank). Managed servers auto migration set to true and primary and back-up machine set and auto-restart set to true.
Any help is appreciated.
Tom.The best way to deal with certificates and FQDN's in ZESM is to use commercial issued certificates or from the company's internal CA. Don't use the built-in product self-signed certificates under any reason for production deployments. The reason behind that, is that the internal ZESM certificate has its private key marked as non-exportable. So you'll not be able to export it from one server and move to another.
For the server FQDN, create an A or Alias record in DNS to something like: "zesm.company.com", and point it to the actual ZESM server, that way, once you need to move all users from server, all that you need to do is to import the commercial certificate and point the DNS record to the new server IP Address.
I did a couple of deployments in that way, with no issues.
Hope this helps.
>>>
From: mauro vaccari<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 1/19/2010 7:36 AM
Subject: Server Migration
Hi,
planning the upgrade to the imminent release of ZESM 4.1 we would like
to reinstall the server because it has undergone many installations.
For security reason and for don't stop production we want to install
ZESM 4.1 in a new server with the same ip and name of the actual then we
want try It in a test VLAN.
My question is:
when we want to pass the new server in production or before ZESM
instalation could we migrate the IIS certificate from the old server to
new one? so the client should not be involved.
Thank you for help
mauro_vaccari
mauro_vaccari's Profile: http://forums.novell.com/member.php?userid=16902
View this thread: http://forums.novell.com/showthread.php?t=398639 -
10.3 Whole Server Migration
Hi,
I need some enlightenments from all. Here is my setup (in Windows 2003 R2)
2 physical Server, PS A, PS B (PS: physical server)
PS A contains, 1 Admin Server, 1 Managed server
PS B contains, 1 Managed Server
I've done the necessary clustering setup and tested its working, using node manager (nmenroll, conseus, etc). now what I'm trying to perform is to try out whole sever migration.
I've found out the script, wlsifconfig.cmd (found under %wls_home%\user_projects\domains\abc\bin\server_migration\, contains some linux command such as grep and rm. Workaround installed grep command for windows and replace rm with del.
I've shut down all managed servers and configure the managed servers to be whole server migration ready, set the node manager properties etc. I start the managed server 1 in PS A, PS A contains the floating IP upon starting. I checked using ipconfig, the floating IP is added. Then I tried to start managed server 2 through the admin console in PS A. Here comes the problem, managed server 2 also add in the floating IP which resulted in windows IP conflict. I'm not sure what went wrong, as of now i suspect is the wlsifconfig.cmd is the root of the problem. Therefore writing in to ask help from all. (Could it be im using 10.3 which does not support whole server migration?)
Best RegardsThis appears to be working on Windows using 10.0.3 Server. For the lack of step-by-step tutorial, my best suggestion is to read Node Manager Administrator's Guide chapter 1,2,3,4,6 and "Using Clusters" chapter 7. I ran into many error messages and had to apply several hacks from google results.
The whole server migration design does not appear to be too useful though.
I have the whole server migration configured on two hosts.
1. Machine A has AdminServer and M1 (runs a pinned application and happens to be assigned a cluster master)
2. Machine B has node manager and M2.
3. M1 is set up to be migratable to A and B
I shutdown Machine A, but nothing is migrated. From the document, it seems both cluster master and AdminServer need to be running in order for migration to happen. This is still a single point of failure. -
Essbase Analytics Link cannot create data synchronization server database
When I try to create data synchronization server database using Essbase Analytics Link, the below error occur, anyone can help?Thnaks
dss.log:
19 Oct 2011 17:28:55] [dbmgr] ERROR: last message repeated 2 more times
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\Comma.hdf"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\PERIOD.hrd"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\VIEW.hrd"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\YEAR.hrd"
[19 Oct 2011 17:28:58] [dbmgr] Create metadata: "C:/oracle/product/EssbaseAnalyticsLink/oem/hfm/Comma/Default/Comma.hdf"
[19 Oct 2011 17:28:59] [dbmgr] WARN : HR#03826: Directory "C:\oracle\product\EssbaseAnalyticsLink/Work/XOD/backUp_2" not found. Trying to create
[19 Oct 2011 17:29:15] [dbmgr] ERROR: ODBC: HR#01465: error in calling SQLDriverConnect ([Microsoft][ODBC SQL Server Driver][Shared Memory]Invalid connection. [state=08001 code=14]).
[19 Oct 2011 17:29:15] [dbmgr] ERROR: HR#00364: Cannot open source reader for "ACCOUNT"
[19 Oct 2011 17:29:15] [dbmgr] ERROR: HR#00627: Cannot create dimension: "ACCOUNT".
[19 Oct 2011 17:29:16] [dbmgr] ERROR: HR#07722: Cube 'main_cube' of application 'Comma' is not registered.
eal.log:
[2011-Oct-19 17:28:56] http://localhost/livelink/Default.aspx?command=readYear&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:56] http://localhost/livelink/Default.aspx?command=readPeriod&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:57] http://localhost/livelink/Default.aspx?command=readView&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:57] http://localhost/livelink/Default.aspx?command=getVersion&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:58] DSS Application created
[2011-Oct-19 17:28:58] http://localhost/livelink/Default.aspx?command=getICPWeight&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:29:15] (-6981) HR#07772: cannot register HDF
[2011-Oct-19 17:29:15] com.hyperroll.jhrapi.JhrapiException: (-6981) HR#07772: cannot register HDF
[2011-Oct-19 17:29:15] at com.hyperroll.jhrapi.JhrapiImpl.updateMetadata(Native Method)
[2011-Oct-19 17:29:15] at com.hyperroll.jhrapi.Application.updateMetadata(Unknown Source)
[2011-Oct-19 17:29:15] at com.hyperroll.hfm2ess.bridge.HyperRollProcess.updateMetadata(Unknown Source)
[2011-Oct-19 17:29:15] at com.hyperroll.hfm2ess.bridge.ws.BridgeOperationManagerImpl.createAggServerApp(Unknown Source)
[2011-Oct-19 17:29:15] at com.hyperroll.hfm2ess.bridge.ws.BridgeOperationManager.createAggServerApp(Unknown Source)
[2011-Oct-19 17:29:15] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[2011-Oct-19 17:29:15] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[2011-Oct-19 17:29:15] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[2011-Oct-19 17:29:15] at java.lang.reflect.Method.invoke(Method.java:597)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:268)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:403)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:171)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
[2011-Oct-19 17:29:15] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
[2011-Oct-19 17:29:15] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
[2011-Oct-19 17:29:15] at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.JAXWSServlet.doRequest(JAXWSServlet.java:98)
[2011-Oct-19 17:29:15] at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
[2011-Oct-19 17:29:15] at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
[2011-Oct-19 17:29:15] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
[2011-Oct-19 17:29:15] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
[2011-Oct-19 17:29:15] at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
[2011-Oct-19 17:29:15] at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
[2011-Oct-19 17:29:15] LiveLinkException [HR#09746]: Data Synchronization Server database cannot be createdWhat version of EAL have you installed, what OS + 32bit/64bit are you installing it on.
What version of the OUI did you use.
Have you gone through all the configuration steps successfully.
Cheers
John
http://john-goodwin.blogspot.com/ -
Two DW Synchronization Server instances by mistake.
Hi!
I experienced the symptoms described in
KB2771934 and ran the suggested script. It did not make a difference so I continued looking and found out that it was a firewall problem instead. However, now I´ve ended up with two instances of "Data Warehouse Synchronization Server". How
can I delete one of them and which one should I delete?
I was fooled when looking for the instances before running the script, I looked for "Microsoft.SystemCenter.DataWarehouseSynchronizationServer" which turned out zero, instead of the correct one "DataWarehouse Synchronization Server" and
therefore thought the KB applied to me....
Regards
PeterToo bad that there is no discovery for that class. So you can't disable it by override and further SCOMDisabledClassInstance does not work.
My idea is to override the monitors/rules targeted to all instances of that class that are there by accident. Hopefully there are no workflows running in the background... will search the DB for entries.
/patrick
http://www.syliance.com | http://www.systemcenterrocks.com -
BAM Cluster setup - issue with whole server migration configuration
HI,
We are working on a SOA , BAM , BPM Cluster setup on OEL VMs
With Admin server running on Host1 and Soa_server1, BAM_server1 , Host2 - Soa_server2 , Bam_server2.
We were successfully able to setup clustering for Soa without using the webTier utilities in our environment, Just by adding entries in the /etc/hosts file.
Followed the document - except for web tier setup
http://www.namredlek.nl/orasoa/InstallSOASuite11gOnCluster_v1.pdf
1) Installed Weblogic 11g.
2) Soa 11g.
3) Domain creation
4) Configured Node manager
5) Soa Clustering completed successfully.
6) Domain up and running with SOA_Cluster up and running.
7) Extended the domain with BAM
The issue revolves when we are doing teh Migration configurations from the console for BAM and we restart BAM server we get an error -
Apr 14, 2011 2:30:35 AM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'bam_server1'
java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
and Bam server goes to Failed Not Restartable state.The error is clearly out there
java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
This error occurs due to a failure in adding the virtual IP of BAM server to the network interface you have specified in nodemanager.properties.
You need to check whether you have specified the correct interface and subnet mask in node manager.properties as below :
The fourth step is to edit the Node Manager's properties file. This file is called nodemanager.properties
and is located in the ORACLE_BASE/product/osbmw/wlserver_10.3/common/nodemanager directory.
For server migration to work properly, you need to add the properties listed below:
Interface=eth0
NetMask=255.255.255.0
UseMACBroadcast=true
· Interface
This property specifies the interface name for the floating IP (for example, eth0).
· NetMask
This property specifies the net mask for the interface for the floating IP. The net mask should the
same as the net mask on the interface; 255.255.255.0 is used as an example in this document.
· UseMACBroadcast
This property specifies whether or not to use a node's MAC address when sending ARP packets,
that is, whether or not to use the -b flag in the arping command. -
Hi All,
I m installing SOA suite in high availability environment (cluster) and I want to understand why I do need to configure Server Migration for SOA and OSB managed servers, what will happened if one of the managed serves fails and I didn't migrate it to the node? Does this affect the running BPEL instance by any mean? And how the users will be affected?
Any helpful answers will be appreciated
Regrads,
Ahmed SaberThank you Robert for your reply.
I still want to understand what will happen for the BPEL process and oracle service bus if server migration is not configured and one of the node get down.
I understood from the link you sent that there are some singleton services that can only run on one node that's fine but I still want to understand from the business point of view how this might affect BPEL process and oracle service bus?
Regards,
Ahmed
Maybe you are looking for
-
I am getting this kernel panic frequently. Does anyone have any idea why?
Using a MacBook Pro circa 2007, 10.7.5 2.2ghz intel core 2 duo, 4 gigs of ram Interval Since Last Panic Report: 121674 sec Panics Since Last Report: 1 Anonymous UUID: 289B03BD-5D9C-4198-A2B5-D295A20C9B9B Tue Nov 20 12:26:
-
How to avoid Duplicate values in Oracle forms
Hello Everyone, I am new to Oracle forms, working on Oracle Applications : 12.1.2, Here I have a form Receiving Transactions, in that I have Lot_Number and quantity columns. The purchased items need to be stored in Lot number. If 100 quantities purch
-
Hi Guys, Quick question I hope, does anyone know what the save path is for each users form settings when they adjust their on screen layouts. I am at a clients that has a very strange IT policy and everytime they log back into SAP the form settings h
-
Unable to Insert record In forms: error -ORA-01779 :cannot modify a column
Hi, I have created one form with two block. Block-1 : Based on View Block-2 : Based on table There is is relationship between Block-1 and Block-2. Block-1 is populating from LOV. I just need to insert /update record Block-2 based on data from Block-1
-
Hi,,,,, i placed a flv video in indesign from c drive. and it plays very well. and saved the file. when i deleted this video from the location of c drive. and then i play it in indesign file. it will not play. would you have any idea about this.