Fin de support de Robohlep v. 8

Quel est le cycle de vie, la fin du support étendue de la version 8 de RoboHelp

Hello Pierre.
There are not many French speaking contributors on these forums, so they operate in English. However I think you are asking about whether RH8 is still supported. Adobe now has RH11 which is four versions after RH8. Your version of RH will still work, although you should test all aspects of your usage and output thoroughly to be sure. I have to admit I don't know what "extended support" is. Maybe something has got lost inn translation here. Maybe you are talking about the maintenance plans which allow you to upgrade. However if you are still using RH8 I doubt whether this is the case.

Similar Messages

My TC has been working fine. Using WIFI my iMac, ipod touch were able to access the internet. Last night, no internet access and when I plug the router connection in my Mac all is good.

My TC was fine, it supports a Mac and an ipod touch. I have had no issues until last night. Nominternet access, Timecapsule app cannot detect or finf the TC. I have my router cable plugged into my Mac and it's fine. I am using Leopard and have no idea what TC firmware version I am on. The TC does get hot! Any clues?

Firmware downgrade.
Go to the airport menu at the top of the page when you have airport utility open.
The second screen will open over the airport utility.
Now hold down the option key when you select firmware so not just new ones open but also old ones.
You get a warning ..
You proceed.
Now you have your TC with whatever firmware you chose.
That is about as Gumpy as I can do it.

I have the latest version of Thunderbird, my hyperlinks used to work fine now they don't work anymore I can send and receive email

I am running version 24.4.0 I can send and receive email but when I get an email that has a hyperlink that I click on and go to. But we don't go anywhere, I tried running in the safe mode that that help, tried rebooting that didn't help. I have an earlier version on my laptop that works fine.

https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working

Supporting objects was not installed successfully from the APEX 3.2 to 4.1

Hi, gurus:
greetings! I have a question regarding migrating application from 3.2 to 4.1. I need to migrate an application in a APEX 3.2 workspace to a new workspace of APEX 4.1. I exported the application from the APEX 3.2 workspace and imported it again to workspace of APEX 4.1, everything works fine except supporting objects was not installed successfully, and the application cannot show images. Could anyone give me a hint to find the cause and solution?
Thanks a lot!
Sam

Hi, Tony:
Nice to see you again! :) It proved out that was due to the wrong file format, I should choose UNIX file format to export my application from APEX 3.2 workspace instead of choosing DOS file format to export. Though I am still confused, Why this does matter? I used to export and import with random file type, as long as I keep consistency of file type for export and import, it never give me trouble like this.
I got the following error message
The following prerequisite checks failed. Installation of this application's supporting objects cannot continue until these issues are resolved.
To continue installation after addressing the errors, navigate to the Supporting Object Definitions of this application and click INSTALL in the Supporting Objects Installation section.
Alternatively, you can deinstall the application definition and reinstall after resolving these issues.
Object Names: EBA_CUST_ACTIVITY_TYPES, EBA_CUST_ADMINISTRATORS, EBA_CUST_ASSOCIATIONS, EBA_CUST_CATEGORIES, EBA_CUST_CONTACTS, EBA_CUST_CONTACT_TYPES, EBA_CUST_CUSTOMERS, EBA_CUST_CUST_ACTIVITY, EBA_CUST_LINKS, EBA_CUST_STATUS, EBA_CUST_VIEWS_LOG, EBA_CUST
Sam
Edited by: lxiscas on Dec 11, 2012 7:06 AM

Tecra M9 Vista installation network problems

Hi,
Have just got a Tecra M9-136 that I try to install with the English version of Vista Business.
Vista refuses to connect to a number of websites:
update.microsoft.com
www.microsoft.com
www.intel.com
liveupdate.symantecliveupdate.com
The following links works fine though:
support.microsoft.com
www.dlink.com
www.linkedin.com
www.vg.no
www.aftonbladet.se
Anyone else that have encountered this problem?
Update;
Found an incompability between Vista and my DLINK-804 router for dns lookups. Now I just wonder if Vista or DLINK is correct. Problem solved.
KR,
Bj?¶rn Hasselberg
Message was edited by: bhasselberg

>Found an incompability between Vista and my DLINK-804 router for dns lookups. Now I just wonder if Vista or DLINK is correct. Problem solved.
Glad info. Thanks again for this information!

TS1713 the led on my "L" style MagSafe connectors flashes green or the next time I plug it in it flashes green then orange and the battery takes a days to charge .

my macbook pro 13 inch with an L style magsafe connector either flashes green all the time or next time plugged in it will flash green then amber . I took the magsafe adaptor to future shop and they said to clean it I just want to know if I need a new adaptor or it is a battery problem .
I took this info from system information and at the bottom it says AC adaptor charging NO and Connected NO .
Thanks All .
Battery Information:
Model Information:
Serial Number:          W01114VL8D3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          3904
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5343
Health Information:
Cycle Count:          82
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -808
Voltage (mV):          11685
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          0
Disk Sleep Timer (Minutes):          0
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          15
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No

with 82 charging cycles, your battery most certainly fine.
http://support.apple.com/kb/TS1713
take a dry toothbrush to the gold contacts both male and female on the connector and retest.
Sounds like you have a damaged connector or a damage in the DC cord.
Go to the apple store and use a DIFFERENT adapter for 10 seconds, that will immediately tell you the SOURCE of the fault.

I am trying to export a movie through imovie using the share function, but each time imovie seizes up and stops working about halfway through the rendering process and I can't proceed and have to turn off the computer. Can this be fixed?

I am using iMovie and can't seem to complete a render of a completed project through the sharing/media browser. Trying to create a medium size movie that I can then access in iDVD to burn a DVD.
But each time I try, iMovie quits on me about halfway through the rendering process.
I have successfully used media browser to create other movies, but now it doesn't work.
Anybody know of any fixes or troubleshooting?
Thanks.
Stuart Schwartz
[email protected]

When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
Note: ExFAT and NTFS formats aren't supported.
http://support.apple.com/kb/HT2426

Web Templates shortcut Not working in SAP Browser screen

Hello All,
I am facing a diffrent issue with Business Explorer Browser 3.x.
When I try to open shortcuts which is for (Web templates) created in Business Explorer Brower 3.x they are not working properly.
The addres stored for this web templates misses the server address in between.
All the web templates were working fine before Support Pack upgrade. We recently has upgraded to SAP BW 7.02 support pack 7.
I am not sure if this is support pack upgrade issue. Would like to know if someone faced same issue and how did they fixed it. is there any way to modify those address on PROD directly.
Many Thanks,
Vaishali

Hi Vaishali,
We also faced the similar issue and I contacted my basis team they have done some configuration in tables related to basis and then my web templates started working fine. I guess this is general issue which occurs after upgrade.
I don't know the exact solution but you can check with your basis team.
Regards,
Durgesh.

Every time I try to down load Itunes I get a message saying installation package could not be opened . Verify the package exist that you can access it Contact vendor

Everytime I try to download iTunes I get this error message saying, "This Installation package could not be opened. Verify that the package exists and that you can access it.or contact the vendor to verify that this is a valid windows Installer package.

I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Good luck. Worked for me back up and running.

"No Service" OS error

I've updated my iPhone 3GS to iOS 4.2.1, and was hoping that the "No Service" OS error was fixed, but now it appears more often, and I can't fix it with just turning "Airplane Mode" On (wait a few seconds") and then back Off again - now I need to either take out the SIM-card (and put it back) or do a restart of my iPhone.
Is there a more usable official Apple procedure available to fix the "No Service" OS error - or is it just fixed with iPhone 4 ??

Found this post on another thread and my share options are working fine.
http://support.apple.com/en-us/HT6545
Follow the steps given on the attached link.

Can't access User Guide after Windows 7

I did a clean install of Win 7 on my HDX 18 and it went very smoothly. Even all my MediaSmart apps and buttons work (except eject which I see doesn't work for many).
One minor detail is that the User Guide won't open. I have HP Support Assistant and on the "Learn" tab there are various items to click to learn more about your computer. All work except the User Guides. I get the following error message...."This program is not installed."
However, I did install the User Guides. It is even listed in Control Panel, Uninstall Program as "HP User Guides 0116." Anyone know why the HP Support Assistant can't find them? I also don't see them installed anywhere as there is no start menu item to click to see them.
Thanks.

My computer came with win 7 home premium x-64 installed.
I installed a 2nd hard drive and installed windows 7 ultimate x-64 on it - now I can boot either one.
I downloaded and installed the latest HP Support Assistant under win7 ultimate, but got the "this is not installed' message when trying to access user's guides from support assistant, and indeed, the user's guide are not in C:\Program Files (x86)\Hewlett-Packard\Documentation, so I copied x:\Program Files (x86)\Hewlett-Packard\Documentation (where x: is my original hard drive) to C:\Program Files (x86)\Hewlett-Packard\Documentation, and now it works fine from support assistant.
Also I can double-click on C:\Program Files (x86)\Hewlett-Packard\Documentation\HpDocViewer.exe in explorer, and the user's guide comes up.
Sorry, I don't know why it doesn't work for both of you, but try just running HpDocViewer.exe in the Documentation folder.

I am trying to use share a Hitachi TourPro 2tb external hd using my Airport Extreme base station. I can't get the hd to appear in the disks section of the airport utility though.

I've tried using a powered and non-powered USB hub without success. Plugging the hd directly into the airport didn't work either. The hd functions fine when plugged into a USB port on 3 other computers so it doesn't appear to be a hd issue. I've reset the airport with and without the hd attached but no success in getting the hd to appear in the airport utility. I followed all of the instructions in Apple's Airport support section but no luck.
All my pc's are running on XP Pro (service pack3). The airport extreame is working flawlessly except for this one particular issue which, unfortunately, was one of the main reasons I purchased it. I've looked through numerous discussions already in the community and tried some suggestions such as attempting to map the drive using the airport's IP address but still no luck.
Does anyone have any suggestions or can tell me what I'm missing in the set-up process?

When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
Note: ExFAT and NTFS formats aren't supported.
http://support.apple.com/kb/HT2426

I'm trying to invoke EXCEL or POWERPOINT file into the browser IE 6.0. The

I'm running TOMCAT locally on my PC (running Windows NT).
I'm trying to invoke EXCEL or POWERPOINT file into the browser IE 6.0.
The output is coming out all scrambled (almost like ASCII code or something),
where it seems like the applications are not firing up.
However, an MSWord file shows up fine. So I go to the WEB.XML file in the TOMCAT\CONF
folder and notice that a MIME type has been set up for MSWord and not the other two.
I set one up for EXCEL and POWERPOINT but the XLS or PPT files still don't work.
So, just for kicks, I comment out the MSWord MIME definition but the MSWord file still worked!!!
I can't figure out what's going on here.
I'm stopping and starting the TOMCAT service each time I make changes to the WEB.XML file,
but it seems like none of the changes are taking affect.
I install all the viewers for MS-Word, ppt, and excell.
But in Netscape it works fine.

To support various file formats in IE browser while using window.open like .doc, .docx, .ppt, .pptx, .xls, xlsx etc.,
The following code can also be used to force any format to get launch outside IE
For these first configure a filter in web.xml and then include the filter class in given path
<filter>
<filter-name>MimeFilter</filter-name>
<filter-class>com.srk.MimeFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>MimeFilter</filter-name>
<url-pattern>*.xls</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>MimeFilter</filter-name>
<url-pattern>*.xlsx</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>MimeFilter</filter-name>
<url-pattern>*.ppt</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>MimeFilter</filter-name>
<url-pattern>*.doc</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>MimeFilter</filter-name>
<url-pattern>*.docx</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>MimeFilter</filter-name>
<url-pattern>*.pptx</url-pattern>
</filter-mapping>
and then include the filter class in the declared path
import java.io.*;
import java.util.logging.*;
import javax.servlet.*;
import javax.servlet.Filter;
import javax.servlet.http.*;
public class MimeFilter implements Filter {
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain) throws IOException, ServletException {
HttpServletResponse httpResp = (HttpServletResponse) response;
HttpServletRequest httpReq = (HttpServletRequest) request;
String fileUrl = httpReq.getRequestURI();
if(fileUrl.lastIndexOf(".xls")!=-1)
fileUrl = fileUrl.substring(fileUrl.lastIndexOf("/")+1);
httpResp.setContentType("application/vnd.ms-excel");
httpResp.setHeader("Content-disposition", "attachment; filename="+fileUrl);
if(fileUrl.lastIndexOf(".ppt")!=-1)
fileUrl = fileUrl.substring(fileUrl.lastIndexOf("/")+1);
httpResp.setContentType("application/powerpoint");
httpResp.setHeader("Content-disposition", "attachment; filename="+fileUrl);
if(fileUrl.lastIndexOf(".doc")!=-1)
fileUrl = fileUrl.substring(fileUrl.lastIndexOf("/")+1);
httpResp.setContentType("application/msword");
httpResp.setHeader("Content-disposition", "attachment; filename="+fileUrl);
chain.doFilter(request, response);
public boolean isLoggable(LogRecord record) {
return false;
public void destroy() {
public void init(FilterConfig arg0) throws ServletException {
Please let me know your feedback.

How to avoid "images" folder in programatic exporting of.rpt files to HTML

In C#, When crystal reports is programatically exported to HTML format, the result is a folder bundled with .htm files and a folder called "images" which holds the .png files associated with these .htm.
My requirement is to have both the .htm files and the graphic files(i.e. '.png' files) in the same folder and do not want a new folder "images" to be created.
This creation of "images" folder does not happen when we manually export cryatal reports to html format.
Kindly suggest, How can we avoid the creation of this "images" folder when programatically exported to html format ?
Following is the approach used to export to HTML format.
ReportDocument mreportDocumentObject_
mreportDocumentObject = new ReportDocument();_
ExportOptions exportOptions = new ExportOptions();
exportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
exportOptions.ExportFormatType = ExportFormatType.HTML40;
HTMLFormatOptions htmlFormatOptions = new HTMLFormatOptions();
htmlFormatOptions.HTMLBaseFolderName = folderName;
htmlFormatOptions.HTMLFileName = fileName;
htmlFormatOptions.HTMLEnableSeparatedPages = bHTMLEnableSeparatedPages;
htmlFormatOptions.HTMLHasPageNavigator = bHTMLHasPageNavigator;
exportOptions.FormatOptions = htmlFormatOptions;
mreportDocumentObject.Export(exportOptions);_
Edited by: GuruRaj01583 on Jul 23, 2009 1:23 PM

HI David,
I have a requirement to e-mail the exported html report. When i e-mail the attachments (i.e .htm file and .png file with in the images folder) , The reciever has to save the .htm file into a folder(say X) and with in the same folder 'X' he has to create a 'images' folder and save the .png file into it. Only then .htm file will load the appropriate ".png".(I believe It is internally designed in .htm to load the .png files from 'images' folder). SO it becomes additional work for the user to save these attachments in folder structure as explained above.
There is another scenario to store the reports into database which requires .htm and .png to be in the same folder.
These are above scenarios where images folder is causing the problem.
I have exported the reports to other formats (i.e. xls, pdf, rtf, txt) and those work fine. Supporting .html format as part of the above requirement is where i am stuck.
I wanted to confirm whether creation of 'images' folder in CR .NET SDK IS BY DESIGN ?
If that is confirmed and if there is NO work around to get the .htm file and .png file into same folder, then we can re - think on our requirement.
Kindly confirm the above or Kindly suggest any work around if available .
Thank You.

Windows 7 64 bit image install question.

My current configuration is as follows: I have my OS (c:/) installed on a separate 150GB HDD. I have a second 450 GB HDD where I have installed all my applications {d:/Program Files, d:/Program Files(x86)}. I would like to replace the 150 GB
HDD with a bigger drive and install my current image. However, will this affect my applications on the 450 GB HDD? Will this work?
By all means let me know if I should not have set my OS install in this manner or suggest a better setup; I'm all ears. Thank you.

Hi!
If you replace the HDD with a new one and reinstall Windows, allmost all appications installed to D:\ will stop functioning. This is because even though you specify D:\ as install directory, files will be placed on the C-drive.
Also, all changes made in the registry by the application will be lost, since it resides on C:\.
The only way that MIGHT work, is to create an image-file of your C-drive and clone it to the new one.
This is something I do not recomend since you will also clone all temporary files and possibly infected files that might be present.
Chaging disks are never fun when you have a lot of applications, but I would recomend a completely new installations and the reinstallation of the applications.
Your setup is just fine and supported, but unless your main drive is a SSD with limited space or you use applications that uses the disk at maximum, there is no gain in doing this.
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

Fin de support de Robohlep v. 8

Similar Messages

Maybe you are looking for