FIN-FSCM-LP (Plug-in in migration to 6.0)

We are migrating from release 4.7 to 6.0. In addition we are creating for the new release a new company which is going to use liquidity planner (only liquidity calculation). We are already using Liquidity Planner (only liquidity calculation) for the companies which are already in production in the release 4.7.
The problem is that when I am checking the steps for the tecnical configuration, before starting the configuration of liquidity calculation for the new company, I do not find the plug-in installed; I know that in 4.6C should be the component 'PI' realease '2004_1_46C', and fot 5.0 component 'PI'  realease '2004_1_500', but I do not know if it is necessary and which one is necessary for 6.0.
Any idea?
Thanks,
Cecilia.

Hello Cecilia,
From ECC6.0 release the concept of Plug-ins(PI) is no more there. This component can now be be found as part of SAP_APPL. Hope this helps.
Best Regards
Ramesh

Similar Messages

  • PROBLEM with 24/96 bit-rate USB DAC that worked fine until I plugged in two

    I'm using a late 2008 15" Macbook Pro that I bought Jan 2009 right before the SD card models came out. Mac OSX 10.6.4 and iTunes 9.2 are installed. I have a Nuforce Icon HDP and a CEntrance DACport 24/96 bit-rate USB DAC (external sound cards) that still work great right now. Note - 16 bit/44 Khz is CD quality, and these 24/96 files are hi-resolution downloads that are closer to SACD or DVD audio.
    I have been evaluating a new third 24/96 USB DAC plugged directly into the Macbook USB port (no hub) which has been working fine for over 2 weeks with 24/96 bit-rate lossless music files in iTunes. Audio Midi Setup is set for 24/96 to match the music file's resolution. After making suggestions to the manufacturer they made some improvements and sent me a new version to listen for the differences.
    I listened to the new one for a day and it worked fine, but when I plugged in the original test sample into the second USB port at the same time as the new one in order to compare them, the sound became garbled and noisy. This never happened when either one was plugged in by itself. Note, if I make changes to the DAC's bit-rate in Audio Midi Setup I usually close iTunes first and then re-open it when I am done.
    Upon hearing this new problem I unplugged both of the new USB DACs and plugged just one of them back in, but now it causes iTunes music playback to pause when one is plugged in and set for 24/96 in audio midi setup. Prior to plugging in both at the same time, either one worked just fine by itself. There is no reason when unplugging one or the other that they shouldn't start working again. But now I can't play any 24/96 music through either one anymore. In quicktime player the songs don't pause like with iTunes, but there is no sound coming through even with just one DAC plugged in at a time. Then I discovered that if I go into Audio Midi Setup application and lower the bit rate to 24/48 then iTunes will resume playing again and I can hear the music fine with iTunes or Quicktime player.
    Basically, my Macbook Pro has now lost the ability to play 24/96 bit rate with either of these new USB DACs, when they both worked fine before I plugged them in at the same time. More confusing is that they use the same USB receiver chip as in one of the DACs that I mentioned above in the first paragraph, and both the HDP and DACport still work fine at 24/96 bit-rate. It's only these two new USB DAC that require me to lower the bit rate in Audio Midi Setup to 24/48 in order to listen through them, and this wasn't a problem as recently as yesterday!
    The computer is acting like some setting needs to be wiped out - it's DEFINITELY NOT the USB DAC's that are faulty because they still both work fine at 24/96 on my wife's iMac (I'm afraid to try plugging in both at the same time to the iMac in case I screw that Mac up too).
    I have reset the PRAM a few times, and this doesn't fix the problem. I thought maybe the com.apple.audiomidisetup.plist file could be corrupted and deleted it, but that didn't help. I don't know what to try next to get the Macbook to start fresh when trying to use these devices, short of having to re-install OSX.
    Please, does anyone have a suggestion of how I can make the Macbook forget it ever saw these two USB DACs, and let me start fresh so they start working normally again? I do dozens of reviews for Head-fi.org and I can't afford to have my Macbook Pro compromised like this, which could prevent me from doing some reviews or evaluating new products.

    UPDATE:
    As noted in the first post, both of these newer USB DAC work fine at 24/96 on my wife's iMac, so it's clear that they didn't both become defective when I connected them to the Macbook Pro at the same time.
    Resetting the Macbook Pro PRAM didn't help, so I removed the hard shell laptop case to get to the battery and remove it, then reset the SMC. After that I could use the original DAC at 24/96 again, but only IF it was plugged into the rear USB port. If I plugged it into the front USB port then the sound was garbled and filled with noise. This was a vast improvement over no sound at all.
    Then I switched to the replacement/updated DAC, but I got no sound at all from either USB port at any bit-rate. And returning to the original DAC again now results in no sound again.
    Sigh... I will reset the PRAM and SMC again, and see how far I can get with this. I'd still love some help. Thanks!

  • My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

    Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

    Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

  • I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.

    I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.

    Try Here  >  http://support.apple.com/kb/ts1591

  • Where to download the SQL Server 2000 plug-in for Migration Workbench

    Dear All,
    I am new to Migration WorkBench, I want to migrate the SQL Server 2000 database to Oracle 9i. When i start the Migration WorkBench, it requires me to select the plug-in (SQL Server) for the migration source. Before i have download and install the Access plug-in for testing. Can anybody tell me where i can find the SQL Server 2000 Plug-in for migration workbench.
    thx.
    Alan,

    here on OTN; on the same page like all the other plugins:
    http://otn.oracle.com/software/tech/migration/workbench/htdocs/utilsoft.html

  • Main differences: interest instruments from FIN-FSCM-TRM vs Loans in FS-CML

    I would like to know the main differences between interest instruments from FIN-FSCM-TRM vs Loans in FS-CML.
    I have to customize Guarantees, Credits and Loans and I have to decide for one solution on the client.
    At first, credits and guarantees are gonna be implemented by FSCM (using "Comercial Paper" for Guarantees and "interest instruments/Line Credit" for Credits).
    I know FS-CML (SAP Banking) is specific for Loans, but I think I can have the same functionality with FSCM Solution (interest instrument from Money Market).
    What specific characteristhic should I take in consideration to decide between one or other solution?
    Is it possible to have relations between products made in SAP banking and others made from Money Market (FSCM)?
    Related to Loans, What kind of things can be done from SAP Banking that cannot be done using Money market?
    Thanks in advance.
    Kind regards.

  • HT204400 I used my apple tv wirelessly and it worked fine,then I plugged an Ethernet wire into  the Apple TV to move it and could not it to connect.  When I unplugged Ethernet wire it will not give me a wireless option. How do I get that back?

    I used my apple tv wirelessly and it worked fine,then I plugged an Ethernet wire into  the Apple TV to move it and could not it to connect.  When I unplugged Ethernet wire it will not give me a wireless option. How do I get that back?

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

    Hi,
    Any one have this issue?
    HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
    This issue was found in my replacement motherboard. the original mother do not have this issue.
    The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
    Appreciate any one can provide clue for resolving the problem.
    I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50) 

    @wheng 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • SAP In-House Cash (FIN-FSCM-IHC)  datasource????

    Hi gurus,
    does anyone know wich datasources SAP provide for SAP In-House Cash (FIN-FSCM-IHC) ?
    Thanks a lot.
    DIKK

    Hi,
    There are no IHC datasources available in SAP standard because the extraction functionality for IHC has nor been developed in BW, I'm afraid.
    M Trein

  • My Macbook pro charging adapter is fine, but when plugged into the charging port it needs to be pressed down to charge and buzzes.

    My charging adapter is fine but when I plug it into the charging port on the macbook it only works if I press down on it and it buzzes slightly. What is wrong and how much will it cost to fix?

    Check the charger connection to the MBP.  The pins are spring loaded and should be able to move freely.  Look into the charge port of the MBP and make certian that there is no dirt or debris inside.
    There should be NO noise when connected to the charger.  If so, bring the MBP and the charger for a FREE evaluation at an Apple store genius bar.
    Ciao.

  • ITunes was fine until I plugged in the iPhone into the computer

    Now, it freezes up, and never does detect the iPhone. All apple usb cables look alike, but they also fall apart rather easily....so we're left with one between an iPod touch, an iPod classic, and an iPhone. I'm not sure if that is the compatibility issue or not.
    The only key difference I can determine is that the computer I'm currently trying to jack into is Windows 7 based.
    When I plug the iPhone into the computer, I don't get a real error msg attached to any kind of code, just a general "iTunes has stopped responding" in a little popup window giving me 2 choices: close the program, or search for a solution online and then close the program.
    When I choose the latter, there is a search bar for ~5s and then iTunes closes. No solution presents itself.
    This happens if iTunes is already running. This also happens if I let the act of plugging in the iPhone initiate the opening of iTunes.
    Any ideas? Last check desktop iTunes was fully updated.
    When I unplug the iPhone, iTunes functions normally.

    I believe there is a problem with iTunes in the 64-bit version of 7. My husband initially installed the 64-bit version and then switched to the 32-bit because quite a few of the software packages he uses for work are not 64-bit compatible yet.
    In 32-bit iTunes, he's had no problem syncing.

  • My i pod is working fine till i plug it into the computer and  the i tunes  logo appeared now it wont go back to original stting i  cant even open and browse the  i tunes  logo stays on.. what do i have to do

    my ipod is workingfine till i plugged it into the computer and the i tunes logo stays on . wan t to open and go back to regular setting .how could i do it?

    Sounds like you are in recovery mode. Try using RecBoot to kick it out of recovery. If that does not work, you may need to restore.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Hi, my computer recongnise my i phone but not i tunes. It used to work fine. Now plug in iPhone and no icons appears. Tryed everything.

    Hi, I connect my iphone 4s to my computer, open itunes and phone icon does not appear. I have the latest version of every (system-driver-etc..)
    used to work fine...I'm hopeless. Device appears nowhere. Please help
    Thanks in advance
    Etienne

    Device not detected in iTunes for Windows

  • TS3274 My speaker works fine until I plug in earphones on I pad.I have tried several ear phones, even the pair that came with the unit.

    My ipad speakers will work fine until I use ear phone connection. I have tried serveral types of earphones even the set that comes with the Ipad. I was hoping there may be a setting that I do not have turned on or another cable I should try to use

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Why is my macbook running slow when not plugged into AC power? It runs fine when its plugged in?

    I have a late 2011 macbook 2.7 GHz i7. This wasn't a gradual thing, it just happened all of a sudden. I had upgraded to mountain lion of which I de-fragged my hard-drive thinking it was a hard drive issue, and am now running snow leopard but it hasn't made a difference. Is there like a energy saving option I am unaware of??  Please help, its driving me crazy. Its making my mac literally useless.

    Use Onyx (free) to do a system cleanup (cache cleanup, permissions repair, etc.).

Maybe you are looking for

  • Asset report error in New fiscal year

    Dear gurus, Today my company meet the problem when run asset report is pop up "fiscal year change not yet made for company code 1000". But when i ask my user they told me that they already run the AJRW. I seacrh to forum how to check whether any tcod

  • ARD 3 Will Not Install "The serial number is not valid"

    Hello, and thanks for reading. I am a new network admin in a silicon valley school district. I come from a Windows background and I am picking up the Mac pretty well. I was asked by the support team to install Apple Remote Desktop 3 on my MacBook Pro

  • HT204368 Problems with connectivity between iPhone 4S and Jawbone!!

    I have a Jawbone bluetooth headpiece. Recently I have had problems with intermittent connectivity with my iPhone 4S. The Jawbone is searching for the phone but sometimes it doesn't connect and when it does it will lose the connection after a few seco

  • Exceptional Discount in invoice Report

    Hi,                                     Under purchasing reports under Main menu,we are having 'exceptional discount in invoices ' report.What is the significance  of that? .Because there  it will show only the A/R Invoice report.Why it is given in P

  • How do I convert a String to a DateTime in SQL ??

    I have retreived the current date and time and place into String data type. but my table colmun is in datetime data type. How do I convert ?? Thanks in advance.