Fin Rep 9.3.1 Error 5200 " Unknown Member: Same as Column A" in print prev

Using Hyperion Financial Reporting Studio 9.3.1, we are attempting to print preview a report and received the following message:
+5200 : Error executing query: ServerName/AppName/FinPlan/UserName/Error(1001005) Unknown Member [Same As Col A] in Report+
Error 1001005 is defined as "Unknown Member [%s] in Report"
This seems odd to me as "Same as Column A" functionality is built into the application.
Others have suggested on these forums that it could be a problem in the user POV. We don't seem to have a Hyperion/BIplus/bin/DeletePOV.cmd file in our system; perhaps that is another version of the software.
This occurs both in Web view and when trying to print preview to PDF.

What happens if you try and run the report from the workspace?
I've seen some issues where conditional suppression didn't work in print preview from the studio but did when running the report in the workspace.
I don't tend to rely on the print preview option anymore.

Similar Messages

Error 1001005 - Unknown Member

 Please does any one know what is causing this error? I'm runningMDX statment through arcplan against a BSO cube. Thanks. Error:Unknown Member [SELECT {[Measures].MEMBERS} ON COLUMNS,[Scenarios].MEMBERS ON ROWS FROM [Hrwrksch]] in Report 

 The entire MDX is SELECT {[Measures].MEMBERS} ON COLUMNS, [Scenarios].MEMBERS ON ROWS FROM [Hrwrksch] and I get Error(1001005) Unknow member [Select] in Report. The errorI posted is from when I pass select statement with qoutes like "SELECT..." All I'm doing is to check if I can retrieve data from Essabasecube with MDX script through dynaSight ArcPlan. If there is asimpler way if doing this please let me know.

SOAP: response message contains an error Application/UNKNOWN/APPLICATION

Hi,
My scenario is Proxy>Soap>WS. When I tested proxy using SPROXY,the web service call is working fine and I am getting response. However, when I call proxy in the the program, I am getting "SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault" in adapter engine. I have gone through many similar posts in SDN but did not help.
Thanks for your help.

Thanks. I used SOAPUI outside SAP and it works perfectly fine. Even in SAP, it works fine when using Sproxy. Here is the error from adapter engine:
2010-06-24 12:59:34     Success     SOAP: continued from request message 6600174c-8a22-613e-e100-000018280c11
2010-06-24 12:59:34     Error     SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
2010-06-24 12:59:34     Success     SOAP: response message leaving the adapter
2010-06-24 12:59:34     Success     MP: Leaving module processor
2010-06-24 12:59:34     Success     Application attempting to send an XI message asynchronously using connection SOAP_http://sap.com/xi/XI/System.
2010-06-24 12:59:34     Success     Trying to put the message into the send queue.
2010-06-24 12:59:34     Success     The response message for message 6600174c-8a22-613e-e100-000018280c11(INBOUND) was successfully transmitted to the calling application.
2010-06-24 12:59:34     Success     The message status set to DLVD.
2010-06-24 12:59:34     Success     The application sent the message asynchronously using connection SOAP_http://sap.com/xi/XI/System. Returning to application.

REP-1437: Run time error in the PL/SQL development environment (DE).

I have a report that has always worked. Now I get the following error
REP-0003: Warning: Unable to open global preference file.
Starting report STCONF6 [Mon Nov 10 21:38:59 2008] ...
REP-1437: Run time error in the PL/SQL development environment (DE).
PDE-PSD001 Could not resolve reference to <Unknown Program Unit> while loading <Unknown> <Unknown>.
End report STCONF6 [Mon Nov 10 21:39:10 2008].
What is it? I DON'T know.
Regards SILVIA

I recall my report from a form, I get the parameter form with my parameters, then click on the traffic light to run and the error appears here
Silvia

Error #3343 Unknown error playing video Flash Player 11.5.502.146 + Citrix

Hi I'm getting an Error #3343 Unknown error playing protected content videos from Vocam.
I have Windows 2003 R2 Enterprise Terminal Servers Citrix Xenapp 5, Flash Player 11.5.502.146, IE 8.    This works fine on Windows XP / 7   and IE 8 / 9 but just not on Citrix servers.
I've used Process Monitor and found no erorrs found only
          RegOpenKey         HKCU\Software\Classes\MIME\Database\Content Type\video/x-flv                NAME NOT FOUND
          RegOpenKey         HKCR\MIME\Database\Content Type\video/x-flv               NAME NOT FOUND
I'm told I need to allow the Adobe Access Module update ??     Also tried installing Adobe Air.
http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7ce3.html says Flash Player 11.5 and above integrates the Adobe Access module, so the update step (calling SystemUpdater.update(SystemUpdaterType.DRM)) is unnecessary
http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118676a5be7-8000.html - When a user tries to play protected content in Flash Player or Adobe AIR, your application must call the DRM APIs. The DRM APIs initiate the workflow for playback of protected content. The runtime, through the Adobe Access module, contacts the license server. The license server authenticates the user, if necessary, and issues a license to allow playback of protected content.
Are there any Registry keys/ Permissions / C:\Documents & Settings / Security / Applications that require All Users - Full control
any suggestions - thanks.

I'm not sure what's going on here so I've forwarded this along to our DRM team. Please be aware thought that Citrix is an unsupported platform.
I'll let you know what I hear back.
Thanks,
Chris

I cannot print, get error 'An unknown error occurred while printing."

I can see that hundreds of other people also have this problem and I can't understand why Mozilla don't fix it.
When I go to print an email or a receipt, whether by printer or by PDF, I *sometimes* get the error, 'An unknown error occurred while printing.'
It is very frustrating as the problem is intermittent. Sometimes it works, sometimes it doesn't... even with the same page being printed. Incidentally, that page can be printed in both Chrome and Internet Explorer without a problem.
I have tried other "solutions" in similar, now closed, threads. However, 'reset' is not working for me. Closing Firefox and reopening doesn't work either. I have the latest version of Firefox: 14.0.1 and have Windows x64. There is enough available space in the cache...
I'm just at my wits end with this.

With the latest updates FF 19 BETA and Acrobat X. The new one with the black PDF screen), I'm having difficulty too printing to Adobe PDF. System Win 7 x 64.
Printing to physical printers not an issue.
No errors, but (Not Responding either in FF or Acrobat.) Printing to the PDF printer directly sometimes works. Using the work-around fast enough, it seems to always work.
I found a work-around:
Goto Print Preview
Select Print
Type in your file name
IMMEDIATELY press OK and Minimize Firefox.
All of the progress boxes/windows are getting confused otherwise. With FF opened as a normal page, there are too many different progress boxes.
Acrobat has one, the windows print driver has one, FF seems to have one and they all can't be on top.
They will if FF is minimized.
Incidentally if FF is killed, the "Creating Adobe PDF" shows its face from being hidden.
I did reset Firefox.
This is seriously messed up now. It used to work fine until the last round of updates from M$, Adobe and FF.

File error: File unknown (capturing)

I just upgraded to FCP6 on my MacPro with 5G RAM, 250G HD. After "log and capture" 17 separate clips and saving intermittably, the computer gave me a "File error: File Unknown" warning window when I tried to save. "Quit" and "save" gave the same error as well as "Save as". I asked our IT dept about it and they didn't have any suggestions, besides trash the FCP pref file. While trying to recreate the error with IT, FCP6 worked fine and saved without error. Has anyone run into this problem with the new FCP6? Did it resolve itself? If not, what did you do?
Thanks!
kristina
MacBookPro, MacPro Mac OS X (10.4.9)

I have had this problem, although I don't have FCP6. The only way I've been able to solve it is exporting as an XML, and then quit without saving. Reimport the XML when you bring it back up.

I get error message "unknown error" When trying to log on to itunes via pc, help please!

I get error message "unknown error" When trying to log on to itunes via pc, help please!

Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

Hyp FR Error: 5200 : Error executing query. Exceed max row number 100000

Hi,
I am getting the error
5200 : Error executing query. Exceed max row number 100000
when I run the report on Financial Reporting. It gives the same error when run on Workspace.
Have you guys encountered this error before? What are the best ways to tackle it? Help is much appreciated guys.
-- Adi
Edit 1 - I tried to simplify the parameters but I still get the same error making me suspect that the issue is not the 100000 row issue.
Edited by: Aditya26 on Apr 11, 2012 9:02 AM

Hi Adi,
This is from My Oracle Support:
How to Increase Row Limit to Avoid Error "Exceed Max Row Number 100000" [ID 866832.1]
Modified 23-FEB-2012 Type HOWTO Status PUBLISHED
In this Document
Goal
Solution
Applies to:
Hyperion BI+ - Version: 9.3.1.0.00 to 11.1.1.3.00 - Release: 9.3 to 11.1
Information in this document applies to any platform.
Goal
How do you increase the maximum row limit to avoid the error "5200: Error executing query: Exceed max row number 100000"?
Solution
1.Edit \Hyperion\common\ADM\<version>\lib\ADM.properties as follows:
From MAX_ROW_NUMBERS=100000 to MAX_ROW_NUMBERS=500000
If you are running extremely large reports, you can increase the limit.
2.Restart Reporting and Analysis services.
For version 11.1.2.x
The path of ADM.properties file in these versions should be located under:
%Oracle_Home%\Middleware\EPMSystem11R1\commo\ADM\11.1.2.0\lib
Cheers,
Mehmet

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

When updating my ipod Nano, I get the error message Unknown Error 9006. Any help is appreciated.

When updating my iPod Nano, I get the error message: Unknown Error 9006. Any help is appreciated.

See this
http://support.apple.com/kb/TS3694#9006

And again "The error was: Unknown alias" on incoming emails

Good day for all
I have read all topics about this error, search Google, this forums.
My environment:
Windows 2008 STD SP2 ENG
MOSS 2007 SP2 + April 09 CU ENG
Exchange 2007 + all recent rollup
AD Windows 2003 Native
Exchange, MOSS and DC is a dedicated servers for each.
For this moment, I have use only mail-enabled lists, and all was working excelent. But now I need use mail-enabled groups (distribution groups). First that I did, is enable mail for Owners group of some test site.
Group is created in OU, and all members is in place. I have try add and delete users from that group in MOSS - all changes replicated to AD's group.
Then I try to send mail to that group, in MOSS log I found this errors:
08/02/2009 22:49:12.22 OWSTIMER.EXE (0x0BA0)                   0x02F0 Windows SharePoint Services   E-Mail                        6873 Warning An error occurred while processing the incoming e-mail file c:\inetpub\mailroot\drop\ec9ec1a901ca13a100000001.eml. The error was: Unknown alias..
08/02/2009 22:49:12.22 OWSTIMER.EXE (0x0BA0)                   0x02F0 Windows SharePoint Services   E-Mail                        6871 Information The Incoming E-Mail service has completed a batch. The elapsed time was 00:00:00.0029298. The service processed 1 message(s) in total. Errors occurred processing 1 message(s): Message ID: [email protected]   The following aliases were unknown: owners
When I execute command stsadm -o refreshdms -url http://sps-lab/sites/test I have another error:
Error in the application.
Same error and for -o refreshsitedms command.
Account for WSS Timer service and for Central Administration Application pool account is the same. This account member of Administrators group in a MOSS Server and has full control on OU.
I was try setup 3 diffrent servers with MOSS - no luck, same error on each.
Additional information:
Using Reflector, i'm disasemble the refreshdms command. Then I run method's code in my custom application, i've got error Access Denied.
Code:
static void Main(string[] args)
//using (SPSite site = new SPSite())
Uri requestUri = new Uri("http://sps-lab/sites/test");
SPWebApplication application = SPWebApplication.Lookup(requestUri);
if (application == null)
throw new FileNotFoundException(SPResource.GetString("WebApplicationLookupFailed", new object[] { requestUri.OriginalString }));
foreach (SPSite site in application.Sites)
site.RefreshEmailEnabledObjects();//Error is here
return;
Error:
{"Server was unable to process request. ---> Access is denied.\n"}
Inner StackTrace:
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.SharePoint.DirectorySoap.SPDirectoryManagementProxy.ModifyDistributionGroup(String Alias, String Name, String Description, String ContactCN, RequestInfo Info, DistributionGroupFlags Flags)
   at Microsoft.SharePoint.SPGroup.ChangeDMS(String dlAlias, String newFriendlyName, String newDescription, String requestor, Int32& jobId)
That can i do more for troubleshooting?

Hi,
You mentioned that Central Administration Application pool account is a member of Administrators group in a MOSS Server and has full control on OU, but I am not sure how is the content application pool configured.
If the content application pool account was not the same with Central Administration Application pool account, please make sure:
Grant content application pool account with Design permission to Distribution Groups list in Central Administration > Operations > Approve/reject distribution groups.
Follow the step by step guidance to configure the incoming mail:
Configure incoming e-mail settings (Office SharePoint Server) (http://technet.microsoft.com/en-us/library/cc262947.aspx)
After successful configured the DMS enabled incoming mail, you should see a request record when assigned a email address to a SharePoint group in Approve/reject distribution groups page and the group would be created automatically if the request was approved.
Hope the information can be helpful.
-lambert
Sincerely,
Lambert Qin | Microsoft TechNet Managed Forum Support
Posting is provided "AS IS" with no warranties, and confers no rights.

SOAP : response message contains an error Application/UNKNOWN/APPLICATION_E

Hi All,
I am working in a Proxy to SOAP synchronous scenario. Message is processing successfully through IE but i am getting the below error in receiver (SOAP) communication channel.
SOAP : response message contains an error Application/UNKNOWN/APPLICATION_ERROR.
Please suggest what will be possible way out to resolve this issue.
Thanks,
Priya Ranjan

Dear Priya
Have you configured Fault Message for this scenario.
This kind of error is generally thrown by the end target system where the message is not processed succesfully due to some error in there system.
Sourabh

I am trying to create a new profile, but I cannot open profile manager in Mac OS 10.5.8. I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".

Hello,
I am trying to repair my Firefox profile, but I cannot open profile manager in Mac OS 10.5.8. When I follow the directions for opening profile manager in my Terminal utility, I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".
At this point, Firefox (v 5.0 or previous versions), is not running.
Thanks.

[http://asqueella.blogspot.com/2010/12/dyld-unknown-required-load-command.html Here's an Explanation]. Basically you need to add "arch -i386 " at the beginning of the command because 10.5 is 32-bit only and more recent versions of Firefox default to 64-bit.

Error An unknown error has occurred when adding email to Apple ID

I am trying to merge two Apple ID's into one. On one I changed the primary email address to an unused email address so I can take the former primary email address and add that email adress to the second Apple ID. When I try to add the email address that used to be the primary email address of the first Apple ID to the second Apple ID (either as a change to the main email address or add a secondary email address) I get the error "An unknown error has occurred." When I go back into the first Apple ID it will add that original email address as a primary or secondary account without any issues. But I get the same error if I try and add that original email address to any other Apple ID (I even tried adding it to a third Apple ID). It would appear that an email address used as an Apple ID cannot be used with any other Apple ID account. Is that correct?

Apple’s having trouble with the Mac App Store and iTunes App Store right now. Try again later.
(123845)

Fin Rep 9.3.1 Error 5200 " Unknown Member: Same as Column A" in print prev

Similar Messages

Maybe you are looking for