Final cut 10.1 will not output or input thru Blackmagic intensity shuttle thunderbolt on 2013 Retina MBP while Premere Cs6 does

Final Cut 10.1 will not output or input thru Blackmagic intensity shuttle thunderbolt on 2013 Retina MBP while Premere Cs6 does

As I mentioned, Premere Cs6 has no issues with the BM Intensity Shuttle Thunderbolt. This proves that the Mac sees the shuttle. iMovie, like FCPX 10.1 does not see it. Not sure if this is an Apple issue or a BlackMagic issue. I plan to contact BlackMagic on Monday out of curiosity. This issue is more of a surprise than a dead end. Happily there are easy workarounds for capture. I use the BlackMagic software to capture. My main issue seems to be that I am unable to use FCPX to output through the Shuttle. Fortunately I have a Mac Pro and an older BlackMagic card which has worked. It is so very nice to skim video on an SSD. No lag and no wear and tear on a mechanical hard drive. The 1Tb Apple SSD is shockingly fast. It is a new world.

Similar Messages

HT1338 FCP-X 10.1.3 will not output HDMI video through Blackmagic Intensity Pro

I can not get HDMI video output through FCP-X 10.1.3. I tested the card and I get video through it to my HDMI monitor using Blackmagic Media Express, so I know the card, monitor, and cable are in perfect working condition. I have windows>AV output selected in FCP-X, but can not get a signal through. Has anyone else experienced this? Any answers out there? I think it is a bug, and a major one at that. I really need this for color grading and to properly view my actual clips.

I guess my system just did not like Wednesday. I started it all up today and it is working like a charm, just like it should. There is no reason it did not start yesterday as I had restarted my Mac Pro several times. We shall leave it as unknown computer glitch as nothing else fits! Did nothing different, don't know, but all is fine on Thursday morning.

Upgraded to Mac OS X Snow Leopard and final cut express 4 will not work

upgraded to Mac OS X Snow Leopard and final cut express 4 will not launch but my final cut express HD 3.0 version comes up. I reinstall my final cut express 4 upgrade disc and it still will not launch.
Where do I go from here?

You installed from the discs, right?
What happens when you try to launch? What are you doing to launch and what happens you do it? Can't see you computer from here. If you probably need to contact Apple with an installation issue on a new computer.

Blackmagic Intensity Shuttle Thunderbolt video output issues

I got Intensity Shuttle TB to output to my monitors via hdmi and component however I am getting latency issues. I've tried all the settings in the system preferences as well as inside Premiere Pro. Also, when viewing a clip in the source window, video output disappears. I've tried the latest drivers as well as the older ones and reinstalled Premiere. Would like to resolve this asap! I tested the Intensity Shuttle with Final Cut Pro 7 and it's as smooth as butter and I'm able to view video output while in the source and programs windows. Is this an Intensity Shuttle issue or an Adobe Premiere issue?--->No video output to monitors while in the source window...Latency issues while viewing video in the timeline/program window. AVCHD Footage....
Macbook Pro 2012 8GB RAM MacOS 10.8.3 Premiere CS6 6.0.2 BlackMagic Intensity Shuttle Thunderbolt 9.7.2 DesktopVideo Driver

OK, got one part solved. I uninstalled Blackmagic's Desktop Video 9.7.2 and reverted back to Desktop Video Driver 9.6.9. Everything is smooth now...no latency/dropped framed looking video.
The only other thing I'm trying to resolve now is video output while viewing a clip in the source monitor. When I double click a clip in the timeline to view in the Source monitor I'm able to view video output to my hdmi and component monitors. However, when I double click a clip in the Project window to view in the Source monitor, both hdmi/component monitors go out of sync with no video output.
ie: clip from timeline viewed in Source monitor: I'm able to see video output
clip from Project Window viewed in Source monitor: No video output
Update: When I double click on a 720x405 .jpg from the Project window to view in the source window, i'm able to view video output to both monitors(hdmi/component). On a 960x720 .jpg, no video output from the source window.
Pretty strange and I hope this info is making sense to Adobe Support. Would appreciate feedback on resolving this issue! I'm hoping this is a simple Adobe Premiere setting that I might've missed.
NOTE: Desktop Video Driver 9.6.8 also has smooth playback but I installed 9.6.9 since it is the last update of version 9.6.

Final Cut is Crashing--Will not Open

OK, I have repaired permissions, trashed preferences, unloaded all the audio plugins (mostly because they take forever when FCP opens), and finally reinstalled FCP Studio 2.
The only thing on my startup disk is OSX SL and programs. I always work off external drives. I have had this setup for some time now - since SL came out and all of a sudden FCP will not open, and I get the following Crash report. All other FCP Studio2 apps open.
I also have a recent install of Logic Studio, but FCP was working after this for a few weeks.
I have also seen this post that refers to illegal copies of FCP.
"Yes the answer is simple. The new prokit update recommended for users of FCP will DISABLE any version of FCP that might have come from a less-than-legitimate source if you know what I mean. very clever.
I got a new copy of FCP 6 and it installed and works perfectly but I won't be downloading any more apple updates unless I'm positive they don't contain any more "fixes" like this."
I have used FCP since version 1.x and have dutifully upgraded, except for the latest FCP Studio 3 upgrade. Listen, I need to use this program
Please Help!!
Process: Final Cut Pro [954]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 6.0.6 (6.0.6)
Build Info: FCPApp-905291121~12
Code Type: X86 (Native)
Parent Process: launchd [252]
Date/Time: 2010-03-24 15:07:47.142 -1000
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 276075 sec
Crashes Since Last Report: 26
Per-App Interval Since Last Report: 16682 sec
Per-App Crashes Since Last Report: 14
Anonymous UUID: 57EB6C25-3A43-4EA5-A100-3ED2EB88E9DC
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000c58ade6e
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 ...lium.HDominantMotionTracker 0x3ba96fd2 0x3ba93000 + 16338
1 com.apple.Helium 0x03663a51 HFCreateInstance + 457
2 com.apple.SmoothCamFxPlug 0x036347bf getFrameProc(unsigned int, void*, char*, unsigned int) + 2283
3 ...uartzComposer.FxPlugWrapper 0x036e9c12 0x36e7000 + 11282
4 com.apple.QuartzComposer 0x986cfa44 +[GFNode(Private) newWithIdentifier:] + 105
5 com.apple.ProFX 0x00e451a6 -[PFXNodeManager nodeInstanceWithName:] + 74
6 com.apple.FinalCutPro 0x004f265c MakeEffectsDictForPatch(NSString*, KGFileRec*, long) + 234
7 com.apple.FinalCutPro 0x004f36f3 AddQCPatchAsEffect(NSString*, long) + 41
8 com.apple.FinalCutPro 0x004f3850 AddQCPatches() + 266
9 com.apple.FinalCutPro 0x004f39a8 RegisterQCEffects + 60
10 com.apple.FinalCutPro 0x001bbbb5 KGPlaybackLibAction + 2817
11 com.apple.FinalCutPro 0x0023398c CallLibs(KGLibActionCode, unsigned char) + 346
12 com.apple.FinalCutPro 0x00233b27 KGFinishLibraries + 115
13 com.apple.FinalCutPro 0x00233c58 KGInit() + 164
14 com.apple.FinalCutPro 0x003ff6bf OpenApplication(AEDesc const*, AEDesc*, long) + 75
15 com.apple.AE 0x96ee7f3a aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 166
16 com.apple.AE 0x96ee7e39 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 43
17 com.apple.AE 0x96ee7d46 aeProcessAppleEvent + 197
18 com.apple.HIToolbox 0x91ba42a1 AEProcessAppleEvent + 50
19 com.apple.HIToolbox 0x91d24ddc AEProcessEvent + 160
20 com.apple.HIToolbox 0x91c365b6 HIStdAppHandler::HandleEvent(OpaqueEventHandlerCallRef*, TCarbonEvent&) + 206
21 com.apple.HIToolbox 0x91c376a4 TEventHandler::EventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 64
22 com.apple.HIToolbox 0x91b6fe29 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1567
23 com.apple.HIToolbox 0x91b6f0f0 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 411
24 com.apple.HIToolbox 0x91b6ef4f SendEventToEventTargetWithOptions + 58
25 com.apple.HIToolbox 0x91ba3b2c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 3006
26 com.apple.HIToolbox 0x91b7027a DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2672
27 com.apple.HIToolbox 0x91b6f0f0 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 411
28 com.apple.HIToolbox 0x91b91981 SendEventToEventTarget + 52
29 com.apple.HIToolbox 0x91d1a81b ToolboxEventDispatcher + 86
30 com.apple.HIToolbox 0x91d1a953 RunApplicationEventLoop + 243
31 com.apple.FinalCutPro 0x0014cece KGMainEvent(void*) + 46
32 com.apple.FinalCutPro 0x002aae53 main + 59
33 com.apple.FinalCutPro 0x00003122 _start + 216
34 com.apple.FinalCutPro 0x00003049 start + 41
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x98c830ea kevent + 10
1 libSystem.B.dylib 0x98c83804 dispatch_mgrinvoke + 215
2 libSystem.B.dylib 0x98c82cc3 dispatch_queueinvoke + 163
3 libSystem.B.dylib 0x98c82a68 dispatch_workerthread2 + 234
4 libSystem.B.dylib 0x98c824f1 pthreadwqthread + 390
5 libSystem.B.dylib 0x98c82336 start_wqthread + 30
Thread 2:
0 libSystem.B.dylib 0x98c7b856 select$DARWIN_EXTSN + 10
1 com.apple.CoreFoundation 0x93d2dddd __CFSocketManager + 1085
2 libSystem.B.dylib 0x98c89fbd pthreadstart + 345
3 libSystem.B.dylib 0x98c89e42 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x98c5c922 semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x98c8a45c pthread_condwait + 1089
2 libSystem.B.dylib 0x98cd3503 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004152e8 DisplayQueue::Run() + 702
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x98c89fbd pthreadstart + 345
7 libSystem.B.dylib 0x98c89e42 thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x98c5c922 semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x98c8a45c pthread_condwait + 1089
2 libSystem.B.dylib 0x98cd3503 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x98c89fbd pthreadstart + 345
7 libSystem.B.dylib 0x98c89e42 thread_start + 34
Thread 5:
0 libSystem.B.dylib 0x98c82182 _workqkernreturn + 10
1 libSystem.B.dylib 0x98c82718 pthreadwqthread + 941
2 libSystem.B.dylib 0x98c82336 start_wqthread + 30
Thread 6:
0 libSystem.B.dylib 0x98c5c8da machmsgtrap + 10
1 libSystem.B.dylib 0x98c5d047 mach_msg + 68
2 com.apple.CoreFoundation 0x93cee77f __CFRunLoopRun + 2079
3 com.apple.CoreFoundation 0x93ced864 CFRunLoopRunSpecific + 452
4 com.apple.CoreFoundation 0x93cf37a4 CFRunLoopRun + 84
5 com.apple.DVCPROHDMuxer 0x0ff4398f AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*) + 317
6 libSystem.B.dylib 0x98c89fbd pthreadstart + 345
7 libSystem.B.dylib 0x98c89e42 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x03663896 ebx: 0x3ba96b7b ecx: 0x01071730 edx: 0x00000001
edi: 0x3c8ace70 esi: 0x0000008e ebp: 0xbfffe488 esp: 0xbfffe470
ss: 0x0000001f efl: 0x00010286 eip: 0x3ba96fd2 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0xc58ade6e
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.8
Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
PCI Card: sppciexpresscardname, sppci_othermassstorage, PCI Slot 3
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: WDC WD3200BEKT-00F3T0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 1
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Hub, 0x05ac (Apple Inc.), 0x911f, 0xfd100000
USB Device: EDIROL UA-25, 0x0582 (Roland Corporation), 0x0074, 0xfd110000
USB Device: Macally iKey, 0x2222, 0x0200, 0xfd120000
USB Device: USB RECEIVER, 0x046d (Logitech Inc.), 0xc50e, 0xfd123000
USB Device: Macally iKey, 0x2222, 0x0003, 0xfd121000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x921e, 0xfd130000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfa200000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfa230000
USB Device: USB2.0 MFP(Hi-Speed), 0x04b8 (Seiko Epson Corp.), 0x0838, 0xfa231000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
FireWire Device: iSight, Apple Computer, Inc., Up to 200 Mb/sec
FireWire Device: unknown_device, Unknown

Shane,
Thanks!! I am aware of that software, after today. I will look into it. Is it through the FCS Maintenance Pack that I will have the ability to disable the offending plugin?
That is a bummer that it is that plugin as I wind up using that a lot for footage that is submitted by certain "monkeys" to the projects I work on. I actually call it the "Monkey Cam" filter.
In any case, I appreciate your help here. I removed the plugin from its folder and tries to open FCP and ...it crashed again. So it might be another plugin?
There was a lot more to the crash results, as I have a lot of plugins, but the board would not let me post such a long post. Would you be open to me adding this and running that too? I am not sure I want to drop the $130 or so on FCS Maintenance, and am kind of tossing around upgrading to FCS3 instead - in hopes that will fix the issue?
Let me know and I will post the remaining code. Mahalo.

My Final Cut pro x will not let me do 1 frame stills

I am working with a Time lapse and final cut x will not let me make the duration any shorter than 2 seconds. How do I over ride?

The selection duration can be made very small, but of course it's very difficult to deal with a one frame selection. Usually the best thing is to convert the image sequence to video before bringing it into FCP, or you can put all the items in the timeline, select them, and set the duration to one or two frames.

Final Cut X suddenly will not take my youtube credentials

I've been using Final Cut X to upload directly to Youtube for many months.
Suddenly today, it will not take my YouTube credentials on ANY of my 3 YouTube accounts...
It just gives me an "Invalid Account Name or Password" every single time.
I'm still able to upload to my vimeo account. Anyone else experiencing this? It happened out of nowhere. I upload 2-3 videos a day. None of my passwords have changed.

Hi, I am having this trouble now with FCP X not accepting my YouTube details. I can get to the
GOOGLE account settings, select SECURITY, but I cannot then find CONNECTED APPLICATIONS AND SITES.
so I can't then click REVIEW PERMISSIONS
Please help
Thank you

Final Cut Server Metadata will not transfer to FCP

Hello,
I am new to Final Cut Server and am encountering a couple of issues. A big one is that the metadata from quicktime clips stored into final cut server will not transfer when I put these same clips from the server into FCP.
Any idea why? The metadata is with each asset in the server but won't transfer when the clips are transferred into FCP.
Any suggestion would be great!
Thanks.

FCP only supports specific types of metadata. What specific metadata fields are you looking to export with the clip? Also, "how" are you getting these clips from FCSvr to FCP?

Final Cut Express 4 will not launch on my Mac

I have a mac OS X 10.5.8 and I have bought final cut express 4 but it will not launch on the computer. Please help.

There are solutions on this forum, search "Final Cut Express won't open," for some of them. Updating to FCE 4.01 is one solution. For HD it is another.

Final CUt Studio 2 will not run on my Mac Pro & Macbook Pros simultaneously

I was under the impression that the licensing contract for FCPS2 allowed for the software to be installed and run on a desktop and a portable machine simultaneously. Am I wrong? I purchased Final Cut Studio 2 legally, and have installed it on my Mac Pro and my Macbook Pro, but if I try to open one of the FCS apps while one is running on the other computer, I get a protection error message and have to shut down the app. Does anyone know a workaround to this other than shutting off airport on one of the machines?

I was under the impression that the licensing contract for FCPS2 allowed for the software to be installed and run on a desktop and a portable machine simultaneously. Am I wrong?
Yes, you are wrong.
The license allows for the installation of a copy on each machine but they can not run simultaneously. The intention is to allow users to work with a laptp while away from the main editing machine. If you need the capability running two copies at the same time, buy another copy.
Good luck,
x

Final Cut Pro X will not let me buy it saying I don't have the right video card?

Get this message but not advice on what I need to get, "Your computer’s video card does not meet the minimum system requirements."
I have a Mac Pro 2008, with all the memory it can handle and it says under graphics: Graphics ATI Radeon HD 2600 XT 256 MB
Any advice?
Thanks!

This is the list fo supported graphics cards:
NVIDIA
GeForce 320M
GeForce GT 330M
GeForce 9400M
GeForce 9600M GT
GeForce 8600M GT 128MB (Note: OpenCL compatible, but does not meet system requirements for Final Cut Pro X, Motion 5 and Compressor 4.)
GeForce 8600M GT 256MB
GeForce 8600M GT 512MB
GeForce GT 120
GeForce GT 130
GeForce GTX 285
GeForce 8800 GT
GeForce 8800 GS
Quadro FX 4800
Quadro FX5600
ATI
Radeon HD 4670
Radeon HD 4850
Radeon HD 4870
Radeon HD 5670
Radeon HD 5750
Radeon HD 5770
Radeon HD 5870
AMD
Radeon HD 6750M
Radeon HD 6630M
Radeon HD 6770M
Radeon HD 6970M

Final Cut Pro X will not open: Asking to "restore windows"???

Hey guys,
I have restarted, updated and done everything I can to get Final Cut Pro X (10.0.1) to open and I keep getting this alert >>> PHOTOBUCKET. I have done nothing new to my hardware or software (other than apples updates) since installing it a month ago from the app store.
The alert keeps asking me to either "Don't Restore Windows" or to "Restore Windows" and I clicked on both numerous times and I still get the "Final Cut Pro quit unexpectedly" alert which looks like this >>> PHOTOBUCKET after about 10 seconds of selecting either option.
Any ideas? -Joe

Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
With Preference Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
If you trash them and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then if they get corrupted you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
Can't guarantee it, but it's worth a try.
Andy

Final Cut Pro X will not export my project - error 1

Hello everyone,
So Final Cut is giving me a hard time. I have a project about 15mins long that I would like to export as a master file and it just doesn't want to work. When I first finished and tried to export, I was using verison 10.0.8. I would select master file for the export and it would just sit there, stuck on 0%. I then realized that I needed to update. I updated to 10.0.9 and tried to do the same thing again - no luck. Next, I closed final cut and trashed preferences. I then opened up and tried exporting again, same thing happened, stuck on 0%. Then I closed again and trashed preferences again. I opened final cut, turned off background rendering, and trashed project render files and event render files (as was suggested in another discussion for export problems). After doing that, I again tried to export - still nothing. At this point of course, I had trashed the render files, so I figured I should just let the project render again. I turned background rendering back on and opened my project - now it would not render! It was stuck on 0%! Okay so I closed and reopened again. I first tried to copy my whole project into a new project and try letting it render that way - nope, didn't work. So I closed and opened again. I turned off background rendering and started a new project. I pasted just a section of my video into the new project and manually rendered that section, which worked. So I pasted the rest of the video (in chunks) into the new project, manually rendering chunk by chunk. Finally I had my whole project again, and the whole thing was rendered. I tried exporting again and got the error 1 message, "The operation could not be completed because an error occurred when creating frame 373 (error -1).". This is my current state of affairs, and its driving me crazy. I just want to export my project!
Please help....Thanks

Thank you. I found it now. This is a location where I did not expect this. I tried to do this using the GUI elements controlling how clips are displayed in the time line. I also was looking for a context menu item on the clip. I did not expect it in the preferences.

Final Cut Pro 7 will not open

When I try to startup Final Cut Pro 7 a prompt says a specific auto save vault is missing. This folder does not exist. Does not allow program to open. Help

Try trashing preferences with http://www.digitalrebellion.com/prefman/

Final Cut Pro X will not playback viewer contents on external monitor

Tried to follow directions to Playback the Final Cut ProX Viewer on a separate monitor.
Option Window > A/V Output greyed out. how do I use a second Monitor to view results?

Typically you need A/V output hardware from AJA or Blackmagic (and they are recommended for various reasons) but if you want to use your TV or display as a second monitor and also use them for FCP X playback then the trick is to disable the Mavericks feature in Mission Control: "Displays have separate spaces"

Final cut 10.1 will not output or input thru Blackmagic intensity shuttle thunderbolt on 2013 Retina MBP while Premere Cs6 does

Similar Messages

Maybe you are looking for