Final cut 7 acting strange - video suddenly takes off or hangs up

Please help! Final Cut Pro 7 unstable! Don't know what happened. Red arrows appear at bottom right of screen. Video suddenly takes off when scrolling or hangs up and I have to wait.

Relaunch FCP = close FCP, then relaunch it.
Reboot your computer = shut down your computer then start it again (if relaunching FCP didn't fix the problem).
For trashing preferences, use this freeware app to do it for you: http://www.digitalrebellion.com/prefman/
-DH

Similar Messages

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

Final Cut Pro X Exported Video Size

I've recently bought Final Cut Pro X and use it for editing videos before uploading to YouTube. I used to export my videos from iMovie as a .mov file to my hard drive to then manually upload to YouTube. There doesn't seem to be this option in Final Cut, so I've taken to using the YouTube share feature but it never uploads so I just manually upload the .mov file that it saves somewhere in the Final Cut shared files folder.
The problem I have is that I export a 720P file so assumed that the video size would be 1280 x 720, it always was with iMove. I've found that Final Cut spits out the video at 1248 x 702 and this is quite annoying as it sometimes cuts off the top and bottom of a video. Is there any reason why it does this or any way to get it to export at the correct display size?

How can I change the size? Normally I export at 720P in iMovie and the video and format are both 1280 x 720. I did a screencast using Quicktime and due to the change in display size it's chopped off the toolbar at the top and a small portion of the dock. I've had to resize the clip in Final Cut to 95% of the original size to get it to fit in the 1248 x 702 size that it chooses to put it in.
As this was only a screencast the file size tends to be this small, but normally I shoot at full HD on my camcorder and the video can be about 10 mins in length. I used the export media function and the resulting file was about 8GB in size! iMovie would typically give me a .mov file anywhere between 700MB - 1.5GB depedning on the length of the video and that suited me fine, but there doesn't seem to be any way to get it that small using the Export Media. Not much of a problem really coz I'm fine using the YouTube share option to get what I want.

Which versions of Final Cut Pro support HD video?

Which versions of Final Cut Pro support HD video? (Other than 6)

Uncompressed HD...that can be done with FCP 4.5 or higher. But as said, you need a capture card, no matter what version you use.
DVCPRO HD support started in FCP 4.5. P2 DVCPRO HD support started with 5.0.4. HDV support started with FCP 5.0, and is much better in FCP 5.1. XDCAM started in FCP 5.0, better in 5.1. AVCHD requires 5.1, and AVCIntra requires FCP 6.
Shane

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to store update?

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

It will work just fine. I would max out the RAM

Final cut pro 7 viewer video running slow (Strobing)

Hey,
Im having a problem with my Final cut Pro 7. Just all of a sudden my video viewer footage when I play it back has been strobing.
Help please?

Does this happen with all the clips you load to the viewer or just some?
Click on a clip (that is strobing) in the FCP browser to select it, and once selected, type Command + 9 to see the item properties for that clip.
Either report those properties here or take a screen shot of the item properties for the clip and post that here.
MtD

Final Cut Studio 2 and video app chaos

Hi,
Did anyone find after installing Final Cut Studio 2 that their 3rd party apps to do with video extraction/conversion suddenly start to unexpectedly quit when in operation? It's a brand new MacPro, lovely machine until Final Cut software went and messed things up. I won't mention the trouble I had to install both Logic Studio and FCS since they both share similar components and included apps, Apple's installer is not designed to cope and I had to mess about with the receipts folder to get both installed. This page was available yesterday http://support.apple.com/kb/TS1110?locale=en_GB to give an insight of the problems between the two. Anyhow, I think the best solution is to remove Final Cut software as I'm not up for spending hours debugging.

I had a huge issue pop up with me too...and I figured the best way was to wipe the drive, install the OS and FCP from scratch. Took a day, but better than spending more time trying to figure things out.
Shane

Need help editing and exporting using Final Cut Express - why does video end up with judder?!!

I've imported material from my JVC HD Camera and have edited a 52 minute sequence on Final Cut Express. I've exported it as a Quicktime Movie and it's 43GB. How do I get this on to DVD?
I've tried using iDVD to export but as you can imagine, the quality is not great. There's a judder on it. I have no idea where to start with using applications like MPEG Streamclip to convert the clip so that when it does get on to DVD, it doesn't judder. Can anyone help? This is driving me insane!!

I've exported it as a Quicktime Movie and it's 43GB. How do I get this on to DVD?
First step - just use this export as the import into iDVD. iDVD will take care of the necessary encoding to fit it on a DVD disk. The file size is of no concern; the only concern is the length (in time) of the video ... iDVD can fit about 2 hours of video on single layer DVD media; about 4 hours on dual-layer DVD media.
Regarding the judder, this is not specifically an iDVD issue. Do you see the judder when you play the video in the FCE Canvas window?

IMovie nor Final Cut Pro will import video from camcorder

Both iMovie 10.0.5 and the Final Cut Pro Trial I just downloaded (to test before purchasing) will not import my movie. The movie plays on my camcorder and it plays in both iMovie and Final Cut but when I click to import, a message appears in the top right corner that reads: NO DATA FROM DEVICE.
Once again, the movie plays on the camera AND plays on the screen. But there is nothing recorded into an event and no file / data transferred to the computer.
I searched the support forums and tried a freeware named DEBUT. It worked but the video playback was very poor, scratchy and blurry.
Processor 3.5 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
OSX 10.9.5
Camera Sony DCR-TRV460 (8MM, Digial 8, Hi8 tapes)
Firewire 4 pin to Firewire 800 cable, into Firewire to Thunderbolt adaptor, into iMac.
How do I get these old tapes into iMovie or Final Cut for editing?

I don't think I can help with your Digital 8 directly into iMovie 10.0.5 or FCPX, but try a few work-arounds.
Try copying iMovie'09 from old to new Mac via a memory stick or external HD. It is only 250 MB.
This still may not work on the new Mac as it may be an issue with Digital 8/Mavericks combination. Any way if you can get iMovie 09 onto new Mac ,give it a try.
OR
Buy an external HD and transfer some data onto this to free up some space on your MacBook.
Then use your MacBook /iMovie 09 to import to Events onto your external HD.
Connect external HD to new Mac and import the DV files in Media of iMovie 09 into FCPX.
A word of caution!
When the files are imported into FCPX from the Media in iMovie 09 check to see if files are copied or just referenced.
If they are copied then you can delete them from iMovie 09, if they are referenced then you must not delete from 09.
You can normally tell: if copied then it takes a while to transfer,If referenced then done almost immediately.
My guess is ,they will be copied, but check.
The above is a bit messy but may get you moving with your new Mac.
Buying a new Mac is an expensive way of overcoming an overloaded HD on the MacBook. Cheaper to buy an external HD.
This may be useful;
How can i move or copy projects and events to an external drive? (Version 9 and earlier)
Someone may be able to suggest a fix for Digital 8 into FCPX directly.

Final cut won't preview video from an NTSC tape

Hey all, Im having a major issue with final cut pro and how it handles NTSC footage. When trying to log in my video clips from my dv deck i get audio through but no video. Very strange, having following the set up from the easy setup menu. Is there a fault with Final Cut and NTSC?
Can any one spread some light on this?
thanks in advance

Just now played around with some of the settings within Audio/Video settings, changed the video playback option to digital cinema desktop preview - Main and it fixed the problem. I was now getting NTSC video as well as audio, however the log bin was grayed out and when I tried to capture the video Final cut wouldn't allow me cause I had no Log Bin selected. The is starting to get well annoying.
Not sure what to try now. Bellow is my current A/V settings within Final Cut Pro
Sequence Preset: DV NTSC 48 KHz
Capture Presets: DV NTSC 48 KHz
Device Control Preset: FireWire NTSC
Video Playback: Digital Cinema Desktop Preview - Main
Audio Playback: Default
Is that not correct?

Final Cut Timeline Feed as video source for iChat?

I was at the Apple NAB presentation in Vegas a few weeks ago, and one of the things they showcased in regard to iChat AV was the ability for an editor to videoconference with several other people at once and one of the video feeds in the chat window was actually the output from the editor's Final Cut Pro timeline. As he made changes in the FCP timeline, he could play it out in real time and all the people in the chat could see the video feed and make comments on the edit.
OK- so we were excited because that's a workflow issue we have here. So, we bought some iSight cameras and Tiger and started to do some testing here. The only problem is that it doesn't seem very easy to set up. At first I just thought, "well, they are just playing the timeline out of the firewire port on the FCP machine and another computer is ingesting that firewire stream as a video source for iChat." except when you connect 2 Macs together with a firewire cable, the FCP system doesn't detect a DV video device to output to and the iChat system doesn't detect the incoming firewire stream as a "camera". I spoke to tech support and they said it's not something they support so no luck there.
I did find an article on Creative Cow about someone doing something similar, but it involved exporting the FCP timeline out through a Kona analog video card into an external tape deck that does analog to DV conversion which then can be imported back into iChat as a DV stream, but last time I checked, a Kona card would run me around 1500 bucks.
Anyone have any other ideas?

HI Jeremy,
Welcome to the Aple Discussion Pages.
Based on the Auto Responding iChat Accounts that play films I would guess they were either using an AppleScript to import FCP as the Video sourdce or usiing an Add-On like iChatUSBCam that also alows you to change the video source to the desktop.
iChatUSBcam has a new beta for Tiger http://www.ecamm.com/mac/ichatusbcam/
Ralph

Final Cut Studio & Size Of Video Player Window

I'm not sure if the answer to my question begins in Final Cut or a later step:
I produce online videos for clients in Final Cut, and in the end product I have been using 320 x 240 screen size, as it seems to have been the standard for modest file size and quick streaming.
Now on many sites I see a much larger video window that begins streaming crystal clear video almost immediately. If I can make larger videos for my clients I'd love to, but I'm not familiar with this technique except for creating the video as a massive file when exporting from Final Cut into the Windows Media export option with Flip4Mac and WMV.
What's the trick? And can Macs do it?
Thanks from Gina

Hard to say what others might be doing unless we can see what exactly you're talking about. Can you point us to one of the sites you're hoping to emulate?
But to attempt to answer your larger question, sure you can do what they do, for the most part, with Final Cut Studio. I'd wager that the bulk of videos available on the web, from producers as varied as major media corporations to dorky podcasters are produced with FCS on Macs.
The bulk of the videos on the web - especially those that load particularly quickly - are Flash files though, so yeah, you'll need some outside tools to emulate that aspect of things.

Final Cut Pro 7 stretches video footage

This question is for Final Cut Pro 7 and, as I was informed, has been posted in the wrong place. However I am unable to move the thread. I apologize for any confusion.
I have video footage that is 853x480, which is a slightly odd dimension. When I import this footage into FCP7, it stretches it to be 1011x480. Why is it doing this, and can I prevent it? The video footage is .mp4 file type.

FFCP7 questions should be posted on the Final Cut Studio forum.

Final Cut Pro X exports video clip as black

Hi Everyone,
I have a big problem, I'm trying to export a project with many HD clips, the first of which is the only one being shot as AVCHD on a Sony DSLR and converted to .mov by Voltaic HD because otherwise I can't import it in Final Cut Pro X. The rest of the clips are directly imported from another camera, no conversion.
The first clip (the one I had to convert) plays and gets edited fine within FCPX, but after I export the whole project, all the part that had that clip is just black picture with no sound. My titles, photos in the meantime are still there, but otherwise all black until the next clips show up.
The sources clips are hd1080p but I'm trying to export the project as 720p. My FCPX version is 10.0.9. I've edited videos from the same source and conversion before and never had this problem.
So now I just took the same single clip into a new project and exported it at 720p and there it just works fine ... Arrrghh!! How can I fix this?

I am having an almost identical problem:
Trying to export (doesn’t matter to what: Master File, Apple Device, etc. all lead to the same result) the project I am working on is producing a black screen with no audio (for the length of the project) – only the start and end titles get rendered.
The project plays fine in FCP X 10.0.9; the initial screen on the export dialog produces a correct looking screenshot (with both the picture and title visible), and predicts realistic sizes for the export file, which ends up being tiny by comparison.
Other projects with a similar workflow are exporting fine: basically I have shot a couple of concerts, and each project is one song with start and end credits and some color correction, stabilization, etc.
The source was 1080P video from a Canon SLR 5D Mark III, and it is being exported to 1080P -- however, I don't think that's relevant, because video from the same source to the same export files worked fine before - FCP X can obviously handle the format involved.
I tried deleting the FCP X preferences -- didn’t help. I had already tried deleting the render files.
Any ideas are greatly appreciated.

Final cut 7 acting strange - video suddenly takes off or hangs up

Similar Messages

Maybe you are looking for