Final Cut acting strange after update

I have a recently purchased Mac pro six-core with Mountain Lion OS.
I've installed Final Cut Pro version 6.06 along with a Kona 3 card. All was fine with Final
Cut until last week when I added RAM (real apple ram from the apple store) and did a
software update that included a OS update. Since then Final Cut has been acting very strange.
First I was getting messages that FCP didn't see the Kona card although it was still seeing video input when I opened the capture window. I re-seated the card and the RAM and ran disk utility and eventually the error messages went away. but when I open the capture window and try to capture a five minute segment from a digibeta deck using marked ins & outs the record stops a couple minutes in. It will cue to a timecode but the capture out point seems to be ignored.
I thought maybe it was a PRAM issue so I zapped the pram, at least I think I did-following the
instructions and hearing the 2 startup chimes, also the SMC. and still the same behavior.
The FCP setup has access to HD & SD formats through a run to the production floor, but these
record attempts were done using a digibeta deck setup in the same room with the same setup that's been rock solid up until now. Just wondering if any other Final Cut users have had any similar issues or if anyone has any insight or advise on what's causing this.
Thanks,
DB

You must update your Kona drivers to match the version of OSX.
Check with the AJA website to download and install the proper ones.
x

Similar Messages

  • Can't open final cut pro 7 after updating mavericks 10.9 !!

    when i update mac os x from lion to mavericks
    final cut pro 7 do not opened !!
    final cut pro x is opened but i prefer to to use fcp7 >>

  • Macbook acting strangly after updating to 10.4.10

    after i was brutally forced by apple software update to install mac osx 10.4.10 now my macbook is acting really strange. I can only list a few things witch are weird because theres way to many to list,
    first of all when i close a chat window on ichat,microsoft messenger the whole thing crashes and has to be reopened again,
    second my macbook takes about 10 mins to boot up
    third it installed sarfari public beta 3 witch i dident want now all my bookmarks and rss feeds are gone,
    when i play big bang brain games they keep crashing when they load up,
    my isight camera keeps displaying a fussey picture now,
    my macbook wont wake from shutdown with Aurora *alarm clock program witch uses itunes*
    my internet keeps timing out for no reason
    and thats what i can list for now if you have any help please reply. I want my acer back now witch never crashed
    Macbook intel core 2 duo   Mac OS X (10.4.10)   60gb hdd, 512mb ram

    Ok , probably sounds like a good idea from the sound of it.
    Are you ok with doing that?
    But before you do have you reset the Pram, you can do this by holding down the command option P R keys down when restarting the macbook and if done correctly the macbook will chime as normal but keep those keys held down for 3 chimes in total,then release them and the macbook will fire up as usual.
    Try that first and post back after and tell me how its running.( be aware though that this will reset your settings to the default ones)
    kindest,becca
    becca
    imac 350,imac 400 DV 9.2.2 10.3(currently locked out) Mac OS 9.2.x waiting for a flash based notebook with 10.5 on it...yeee haaa

  • Apple TV Acting Strange After Update

    Hi all,
    Last night my Apple TV downloaded and installed the latest update, however now it appears the power light has stopped working and the Apple Remote also isn't responding which means I have no way of accessing the device.
    Any other users out there have a similar issue or an idea how to fix it? I've plugged it into my laptop and installed update again / restored factory settings, however it still hasn't fixed the issue.

    HI
    i have the the same problem ,  i tryed to restart it hundreds of times , i unplug the power but stil the same problem
    and when its stoped working i have to unplug it from the power
    pleas guys help me  its very anoying
    kind advise
    jamal a.s

  • Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to store update?

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

    Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • TS4057 dating or showing up uMotion 5 and Final Cut X aren't updating or showing up under the 'Purchased' Tab. What do I do?

    Motion 5 and Final Cut X aren't updating or showing up under the 'Purchased' Tab. What do I do?
    I am running OS X Mountain Lion on a 13-inch MacBook Pro Mid 2010 model.
    Thanks.

    Thanks one again. I know you helped me the last to. I do have the Deja Vu font set in my folder. I downloaded and the last time. So I don't know if there is supposed to be more or not, but those were installed with Windows-XP after my reformat.
    This is really driving me nuts. as I've done several re-formats on my computer and several friends computers and even upgraded hardware so I am not necessarily a software or programming expert, I am somewhat advanced when it comes to computers in general and can usually diagnose the problem but these font's are the problem and they never were before.
    I did see in another forum that if you had a Dell Computer and did the Microsoft update for the onboard video card driver that it could be the culprit, but I have that disabled being I have a much better graphics card so the updates from Microsoft for the onboard video weren't installed.
    It' a Dell Dimension 3000 with an Intel(R) 82865G Graphics Controller so I don't believe it is the culprit being it is disabled. The actual video card that I am using is a PCI Nvidia GeForce 9400 GT with 1 GB Memory. And I didn't have any problem before.
    I appreciate the help. But still can't get things to work. Live Help Chat doesn't open for another two hours so maybe they can do "Remote Access" or something and can check setting and help me. But if you come up with other suggestions, they would be greatly appreciated.
    Thanks again.
    Susan

  • My macbook pro started acting strange after a safari reset. the mouse no longer: animates the dock, activates hot corners or selects pages from the 'top sites' page.

    my macbook pro started acting strange after a safari reset.
    the mouse no longer: animates the dock, activates hot corners or selects pages from safari 'top sites' (without a hassle). attempts to reset dock and hot corners from preferences has been fruitless
    the mouse also gets 'stuck' in logic precipitating force quits.
    i run osX 10.6.8 on a 2007 macbook pro that has had 2 motherboards replaced autumn 2010.
    my troubleshooting has been: restart, pRam and safe boot, also checking a 'test' account to find the same issues extant.
    pRam restart caused airport to quit and say there is no airport card, and wouldn't respond untill another reboot.
    macbook pro 15" 2.4 GHz intel core duo.2 GB 667 MHz DDR2 SDRAM.
    i have treated this book with care, yet run logic pro studio to the limit of this book's abilities.
    what shoud i do?

    You don't say which year you have, however...
    ...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
    Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
    One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
    Good luck,
    Clinton

  • I can't open Final Cut Pro x after it crushed

    I can't open anymore Final Cut Pro X after it crushed while I was editing footage for 10 minutes. Can you tell the reason and what could I do to resolve it?
    Thank you

    Maybe the Library or Project have become corrupt.
    Hold down the option key as you launch FCP X and you should be given the choice of which Library to open.
    Choose to create a new one.
    If that doesn't work try these troubleshooting strategies.
    Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
             http://www.digitalrebellion.com/prefman/
    2.  With FCP X shutdown, hold down option key and select Go>Library>Application Support>Final Cut Pro  .  .  .  trash the Layouts Folder.
      3. Open Disk Utility and Repair Permissions.
      4. Trash FCP X using this free app and reinstall it.
          http://www.digitalrebellion.com/fcsremover/
      5. If these 3 measures don't work, create a new User Account (Admin) in System    Preferences and try running FCP X from that as it sometimes works miracles.

  • I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

    I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

    I'm sure the pros will be along to ask what your settings are.  Although this may not be exactly helpful, I did find compressor to be much more robust for burning DVDs.  This could partially be because it includes a template to convert you movie into correct DVD format.  I was quite pleased with the outcome after multiple failed attempts using FCPX alone.

  • My final cut pro will not update on my iMac, it will update on my Macbook.

    my final cut pro will not update on my iMac, it will update on my Macbook. I have OS X Yosemite on both systems, my macbook has final cut pro x version 10.1.4 and my iMac shows no updates available and is on version  10.1.1. I have tried looking in iTunes for the same update that is installed on my macbook under the same iTunes account, but it doesn't show any updates. I tried deleting from my iMac and it won't delete so I can reinstall it. any suggestions?

    You need to be logged into the Mac App Store with the same Apple ID in order to see your updates. You speak about iTunes: maybe you meant that just as an expression to refer to your Apple ID, but just in case you didn't: you do NOT use iTunes to download mac software. You use the App Store application, available under the Apple menu.

  • Final Cut Studio 5 not updating in software update

    I have final cut studio 5, which I upgraded to from FCP4 through their update program and 199.00. When I run software update, no updates show up for any of the pro applications.
    When I had FCP4 on my old computer, the updates used to show up and I could install all of them directly from software update. I know that their are updates, cause I can manually download them off of the apple site, but they never show up in software update. does anyone know why this would be happening?
    Could it be a confliction due to some sort of registration issue? or does apple just not use software update as a means of updating the pro applications anymore? Thanks in advance for any help.

    I am running version 5.1 It just dawned on me that I have all of my pro apps in a folder called "final cut studio" does software update seach the applications folder to see if certain apps are installed, a if so, would this be why it isn't seeing it and not showing the updates?

  • Final Cut Studio crash after OS 10.6.5 update

    10.6.5 and Final Cut Studio.
    Final Cut studio is not working after 10.6.5 update. Have spinning ball of death on many projects and exports from FCP crash Compressor and DVD Studio Pro (or they crash of their own accord)
    Question: Reinstall FCP??
    Question: is anything lost when deleting current FCS??
    Do not want to roll back to previous OS. Have done too much stuff since, and it's complicated.

    Question: Reinstall FCP??
    As a last resort, maybe. Have you tried using Disk Utility to repair permissions?
    Did you install the ProKit 6.0.1 update? There are some threads here that advise not to do so.
    You can find out by opening the Software Update pane in System Preferences and looking under the Installed Updates tab.
    Question: is anything lost when deleting current FCS??
    The applications, accompanying media content, associated libraries etc will be removed. You will not lose project files or media that you have imported from cameras or other sources.

  • Safari's Tabs Acting Strange After 10.6.4 Update

    Hi guys,
    After the 10.6.4 update Safari's tabs have been acting strangely. Say I have Apple.com open in one tab and I hit Apple-T to open a new tab. It then changes that tab (which Apple.com was loaded on) to the Top Sites, keeps the focus on this tab, then opens a blank tab right next to it. I effectively lose the page I was using and a blank one appears. Any ideas as to how to fix this?
    Thanks for the help!

    HI,
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 7 buttons and click Reset. Relaunch Safari. If you still having problems...
    Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
    Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
    And if you didn't repair disk permissions after you updated Safari, it's a good idea to do that.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • Final Cut Studio Fail After Pro Application Update 2010-1

    Final Cut Pro crashes when loading project.
    Motion crashes when loading project.
    Compressor won't allow me to "submit" my batch from the 'name batch' stage.
    I didn't try DVD Studio or Color.
    Problems started as soon as I updated. Anyone else have similar problems? I tried dumping my system preferences but that didn't help. I haven't modified or customized FCS at all, I don't have any unusual plugins - I hardly even set up customized window configurations.
    Using latest Final Cut Studio (MB642Z/A)
    Final Cut Pro 7.0
    Compressor 3.5
    Motion 4
    Running OS X 10.6.2
    3.06 GHz Intel Core 2 Duo, 21.5" iMac
    8 GB 1067 MHz DDR3
    Thank you for any feedback. If others have similar problems, I can wait for next update (hopefully soon) otherwise I have no clue where to start.
    --Doug

    I should have known better, but new to the mac....dealt with death blows like this for a while....
    Process: Final Cut Pro [1209]
    Path: /Applications/Final Cut Studio/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier: com.apple.FinalCutPro
    Version: 7.0.1 (7.0.1)
    Build Info: FCPApp-910141802~4
    Code Type: X86 (Native)
    Parent Process: launchd [124]
    Date/Time: 2010-03-25 01:06:44.195 -0500
    OS Version: Mac OS X 10.6.2 (10C540)
    Report Version: 6
    Interval Since Last Report: 3062 sec
    Crashes Since Last Report: 9
    Per-App Interval Since Last Report: 1939 sec
    Per-App Crashes Since Last Report: 8
    Anonymous UUID: 2739307A-393B-4135-A387-644DE9430D3D
    Exception Type: EXCBADACCESS (SIGSEGV)
    Exception Codes: KERNINVALIDADDRESS at 0x00000000390302fe
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x90f1bb51 tinymalloc_from_freelist + 741
    1 libSystem.B.dylib 0x90f1ab03 szonemalloc_shouldclear + 297
    2 libSystem.B.dylib 0x90f1a988 malloczonemalloc + 81
    3 libSystem.B.dylib 0x90f18a58 malloc + 50
    4 libstdc++.6.dylib 0x91105617 operator new(unsigned long) + 36
    5 com.apple.motion.TextFramework 0x24c54dab TXTextObjectRender::getHelium(LiAgent&) + 667
    6 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    7 com.apple.motion.TextFramework 0x24c13829 TXTextLayout::buildHGNodeForFace(PCPtr<TXTextObject>, OZRenderParams&, LiAgent&, TXHeliumGlyph*, unsigned int, bool, PCMatrix44Tmpl<double>&, PCMatrix44Tmpl<double>&, PCMatrix44Tmpl<double>&, PCMatrix44Tmpl<double>&) + 4985
    8 com.apple.motion.TextFramework 0x24c455ec TXCachedGlyphRender::getHelium(LiAgent&) + 940
    9 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    10 com.apple.Lithium 0x248c4cda LiImageSoftClip::getHelium(LiAgent&) + 74
    11 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    12 com.apple.Lithium 0x248c4cda LiImageSoftClip::getHelium(LiAgent&) + 74
    13 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    14 com.apple.Lithium 0x248e0692 LiPolygonInstance::makeNode(LiClipSet const&) + 1682
    15 com.apple.Lithium 0x24911111 LiRenderInstance::collectGeode(LiGeode*, LiCollectState&) + 929
    16 com.apple.Lithium 0x24911f01 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 1521
    17 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    18 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    19 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    20 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    21 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    22 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    23 com.apple.Lithium 0x249123a8 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 2712
    24 com.apple.Lithium 0x249123a8 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 2712
    25 com.apple.Lithium 0x249123a8 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 2712
    26 com.apple.Lithium 0x249144b5 LiRenderInstance::collectPolygons(LiSceneObject*, LiPtrArray<LiPolygonInstance>&) + 1509
    27 com.apple.Lithium 0x24914d35 LiRenderInstance::collect() + 949
    28 com.apple.Lithium 0x24914f91 LiRenderInstance::buildHeliumGraph(LiAgent&) + 529
    29 com.apple.Lithium 0x24915a3e LiRenderInstance::getHelium(LiAgent&) + 270
    30 com.apple.Lithium 0x2486bac3 LiRenderer::getHelium(LiAgent&) + 51
    31 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    32 com.apple.ozone.framework 0x238c4ebe GLRenderer::getSceneHeNodeFromLiWorld(OZScene*, OZSceneSettings const&, OZRenderParams&, PCPtr<LiGroup>, HGRenderer*, int, int, double, double, long*) + 2254
    33 com.apple.ozone.framework 0x238c96e0 GLRenderer::getFrameNodeForSingleTime(OZScene*, OZRenderParams&, HGRenderer*, double, double, long*) + 880
    34 com.apple.ozone.framework 0x238ca2ae GLRenderer::getFrameNodeIncludingFields(OZScene*, OZRenderParams&, HGRenderer*, long*) + 990
    35 com.apple.ozone.framework 0x238ca894 GLRenderer::getFrameNode(OZScene*, OZRenderParams&, HGRenderer*, long*) + 164
    36 com.apple.ozone.framework 0x238ce817 GLRenderer::render(OZScene*, OZRenderParams&) + 2583
    37 com.apple.ozone.framework 0x2396fdd3 OZXGetFrame + 2755
    38 com.apple.ozone.framework 0x23972406 OZXGetFrameAsTexture + 86
    39 ...uartzComposer.QCMotionPatch 0x0d949c96 UserHasCancelled + 17982
    40 ...uartzComposer.QCMotionPatch 0x0d9467ca UserHasCancelled + 4466
    41 ...uartzComposer.QCMotionPatch 0x0d946428 UserHasCancelled + 3536
    42 com.apple.QuartzComposer 0x91730396 -[QCPatch(Private) _renderAtTime:arguments:] + 111
    43 com.apple.QuartzComposer 0x91739334 -[QCContext renderPatch:time:arguments:] + 809
    44 com.apple.QuartzComposer 0x91738f9c -[QCGraphicsContext renderPatch:time:arguments:] + 96
    45 com.apple.QuartzComposer 0x91737f53 -[QCOpenGLContext renderPatch:time:arguments:] + 565
    46 com.apple.QuartzComposer 0x91737d16 -[QCPatch(Runtime) render:arguments:] + 92
    47 com.apple.FinalCutPro 0x005196e9 RenderQCPatch + 1671
    48 com.apple.FinalCutPro 0x00515c63 FCPQCMainEntry(long, long, KGDictInt*, void*) + 10083
    49 com.apple.FinalCutPro 0x002ea236 pKGRunTransition(KGDictInt*) + 2182
    50 com.apple.FinalCutPro 0x0045b5dc EffectRender(XXGlobals*, EffectTree*, long, long, Output*) + 5894
    51 com.apple.FinalCutPro 0x0045e909 RenderFXTreeNode(XXGlobals*, EffectTree*, long, unsigned char, KGQTCanvasFormat, long, Output*) + 1497
    52 com.apple.FinalCutPro 0x004614fb DecodeEffectFrameN(XXGlobals*, EffectTree*, long, unsigned char, Output*, bool*) + 2933
    53 com.apple.FinalCutPro 0x004609ff DecodeEffectFrameN(XXGlobals*, EffectTree*, long, unsigned char, Output*, bool*) + 121
    54 com.apple.FinalCutPro 0x004609ff DecodeEffectFrameN(XXGlobals*, EffectTree*, long, unsigned char, Output*, bool*) + 121
    55 com.apple.FinalCutPro 0x00461893 DecodePipeTree(XXGlobals*, Output*) + 633
    56 com.apple.FinalCutPro 0x0042bb15 FCPMediaHandler::RenderFrames(long long, bool) + 3981
    57 com.apple.FinalCutPro 0x0042c17b FCPMediaHandler::Idle(long, long, long*, TimeRecord*) + 657
    58 com.apple.FinalCutPro 0x0042d245 FCPMHIdle(FCPMediaHandler*, long, long, long*, TimeRecord*) + 45
    59 ...ple.CoreServices.CarbonCore 0x92def72d callComponentStorage_44444 + 49
    60 ...ple.CoreServices.CarbonCore 0x92de4474 CallComponentFunctionCommonWithStorage(char**, ComponentParameters*, long (*)(), unsigned long) + 54
    61 com.apple.FinalCutPro 0x00426009 FCPMHDispatch(ComponentParameters*, char**) + 59
    62 ...ple.CoreServices.CarbonCore 0x92ddcb06 CallComponentDispatch + 29
    63 ...ickTimeComponents.component 0x95ee4de7 MediaIdle + 61
    64 ...ickTimeComponents.component 0x957673b6 doGenericIdle + 2991
    65 ...ickTimeComponents.component 0x957691eb GenericMoviesTask + 357
    66 ...ple.CoreServices.CarbonCore 0x92def72d callComponentStorage_44444 + 49
    67 ...ple.CoreServices.CarbonCore 0x92de4474 CallComponentFunctionCommonWithStorage(char**, ComponentParameters*, long (*)(), unsigned long) + 54
    68 ...ickTimeComponents.component 0x9576893e GenericComponentDispatch + 182
    69 com.apple.FinalCutPro 0x00426025 FCPMHDispatch(ComponentParameters*, char**) + 87
    70 ...ple.CoreServices.CarbonCore 0x92ddcb06 CallComponentDispatch + 29
    71 com.apple.QuickTime 0x912b4083 MediaMoviesTask + 61
    72 com.apple.QuickTime 0x912b2e33 TaskMovie_priv + 4783
    73 com.apple.QuickTime 0x912c5b68 MoviesTask_priv + 101
    74 com.apple.FinalCutPro 0x001bad50 DoMoviesTask(KGPlayerRec*) + 2388
    75 com.apple.FinalCutPro 0x001cda79 DisplayMovie(KGPlayerRec*) + 2201
    76 com.apple.FinalCutPro 0x001d1f70 pKGPlayerUpdate(KGPlayerRec*) + 196
    77 com.apple.FinalCutPro 0x001bb045 DelayTimer(long, long, KGDictInt*, void*) + 89
    78 com.apple.FinalCutPro 0x00150552 KGTimerInvoke(__EventLoopTimer*, void*) + 212
    79 com.apple.CoreFoundation 0x900c1edb __CFRunLoopRun + 8059
    80 com.apple.CoreFoundation 0x900bf864 CFRunLoopRunSpecific + 452
    81 com.apple.CoreFoundation 0x900bf691 CFRunLoopRunInMode + 97
    82 com.apple.HIToolbox 0x97feff0c RunCurrentEventLoopInMode + 392
    83 com.apple.HIToolbox 0x97fefcc3 ReceiveNextEventCommon + 354
    84 com.apple.HIToolbox 0x98177c02 _AcquireNextEvent + 54
    85 com.apple.HIToolbox 0x9816dd5b _RunAppModalLoop + 101
    86 com.apple.HIToolbox 0x9816e13b RunAppModalLoopForWindow + 86
    87 com.apple.FinalCutPro 0x002a86b3 pKGDialogRun(KGPanelRecord*, unsigned char, unsigned char, KGDictInt*) + 755
    88 com.apple.FinalCutPro 0x00285bf4 pKGNotifyFilesOffline(KGDictInt*, long) + 1990
    89 ...FinalCutPro.Plugins.Browser 0x0bd0c914 BrowserOpenFile(KGFileRec*, unsigned char, unsigned char, KGDictInt**) + 5718
    90 ...FinalCutPro.Plugins.Browser 0x0bd0f42d Browser(long, long, KGDictInt*, KGFileRec*) + 10299
    91 com.apple.FinalCutPro 0x0018c870 CheckForOpenFile(KGFileSpec*, char*, unsigned char, unsigned char, KGDictInt**) + 488

Maybe you are looking for