Final cut and hardwear acceleration (real time Rendering )

hi all
used final cut pro in vedio editting i search for any solution for accelerat my rendering time ...am tierd coz its take alot time ....i search about hardwear pci card like aja and matrox but i dont sure it work..............
i search also about tuning of the mac os itself but i dont find any things.........
plz help me if any one know ...............

There are no third party hardware solutions to speeding up render times. Not Matrox, or AJA. A better graphics card will make certain effects real time or render faster (the FXPlug ones only). But really, the only thing that speeds up render times are processors. So the only way to speed up render times would be to get a faster machine.
Shane

Similar Messages

Ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?

ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?

Your media is stored in Final Cut Events folder > "name of event" > original media. The Final Cut Events folder is in your movies folder or at the root level of an external drive if you are using one to store your media. Simply open iMovie and under file menu select import movies. Navigate to the original media folder and import your clips to Imovie event library.

When I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

when I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

Because your clip properties do not match your sequence settings.
It will help a lot if you provide details ...
FCE Easy Setup
Sequence settings (vid rate, frame size, compressor)
Source of your clips (camcorder make/model, etc)
Clip properties (vid rate, frame size, compressor)

Final Cut and After Effects "file is busy"

Hello All-
I am running Final Cut Pro 5.1.4 and After Effects 7.0.1 Pro (on OS 10.4.8) and I have a question. I have a series of After Effects animated DV Quicktime clips edited together in Final Cut, and when I make changes to the After Effects project files and try to rerender, I get an error:
After Effects error: unable to overwrite - file is busy (delete) (-47) ( 3 :: 3 )
It's like Final Cut is "holding onto" the files and not allowing After Effects to rerender them. If I close down Final Cut, I can rerender just fine, but this gets real annoying closing it down and restarting it every time I need to rerender a clip. The problem is, because of my workflow, I need to do this dozens of times a day with clients in the room and I'm spending a lot of time closing and restarting Final Cut over the course of a day... is there way to do this without closing down Final Cut?
I assigned After Effects to be the "External Editor" for "Video Files", and used Final Cut's "Open In Editor" command. It sends the quicktime file to After Effects (not exactly what I want) and you would think that at this point Final Cut would have relenquished its access to the file so that I could rerender in After Effects, but nope, I still get the error. I have tried this with the User Preference setting "Always Reconnect Externally Modified Files" both on and off, no difference. I have also tried "Embed Project Link" in After Effects's quicktime output options, but this didn't help anything (I believe this only affects other Adobe apps).
The weird part of this is that when I drop a Photoshop file onto the Final Cut timeline, I can do "Open in Editor", it throws it to Photoshop, I can alter it and save with no problem, and pop back into Final Cut and it will be updated. But no such luck with Quicktime files and After Effects.
Let me know if there is a solution to this, or if I am stuck having to shut down Final Cut every single time I need to rerender one of the After Effects animation clips in the timeline.
- Bob Wilson
MacBook Pro 2.33ghz Core 2 Duo 15" Mac OS X (10.4.8) 3 gigs ram, 160 gig HD

What i have to suggest is more of a work around than it is a solution. i've had this problem off and on as well. What i do is add a number to the name of the newly rendered file, (ie. "monkey_throwspoo2.mov") import that file into FCP, open it in the viewer, and then copy it (apple + c). Provided it's the smae length as the previous file, you can right click on the previous file in the timeline and paste attributes, making sure to click on the content button for video (and audio if there is any). This should replace the old file in the timeline with the new one. Granted, you end up having a bunch of files that you're not using, but it's faster than restarting Final Cut (and looks more like it's something you're doing on purpose rather than a problem with the program to your clients). Hope this helps.
Craig

Experimenting with FCP/ Real time rendering question

Hello, I am preparing to purchase a Mac Pro and spent some time at the local mac affiliate store playing with FCP and motion.
In fcp I took two clips and dropped them in the timeline, adding the 3d cube transition, and some filters to both clips.
I was looking at performance of real time rendering on teh base config of the MP I plan on purchasing.
I then added another clip above these two, intending on dropping the opacity to further push the RTR (real time rendering). This clip overlapped the transition of the two other clips in v1 and v2.
When attempting to play the timeline the viewer window now said "Not Rendered"
My question is:
Is there a limit to how many tracks can be run under the RTR? Why did I get this message?
My main reason of the move to a Mac Pro is to get away from constantly pre-rendering.
Thanks everyone in advance!

In fcp I took two clips and dropped them in the timeline, adding the 3d cube transition, and some filters to both clips.I was looking at performance of real time rendering on teh base config of the MP I plan on purchasing. I then added another clip above these two, intending on dropping the opacity to further push the RTR (real time rendering). This clip overlapped the transition of the two other clips in v1 and v2.
<
Sounds like you know what you're doing and what you expect. A factor that has not been mentioned yet, besides RAM, prefs and drive speeds, is your video format.
Also, the new rev of FCP is taking advantage of tons of processing overhead, vastly increasing the amount of stuff you can do in real time. However, real time is largely a preview operation, regardless of the machine or system, unless you are using proprietary codecs, such as Media 100, that might be hardware-assisted. Output is almost always a rendering issue, multiple stacked or processed layers require the creation of new media.
The only way you're going to be able to decide if Macintosh and FCP are right for you is to demo thoroughly and that requires using your own footage.
bogiesan

Final Cut and Serial Number

I had Final Cut Studio 5.1 intalled on my Powerbook G4. Then, my computer was sent in and I was without for a month. So while it was away, I put Final Cut Pro on my home computer to finish my film for school. When I got my laptop back, I tried uninstalling Final Cut Pro on my home computer, but didn't have the installation disk, so I just simply trashed the 'Final Cut Studio System ID' on my home computer so that I couldn't use the program.
So, now Final Cut works fine on my Powerbook. But, I accidently updated to 5.1.4 - while my school computers are still on 5.1.2. So I wanted to uninstall Final Cut, and then re-install it so that the applications would be compatable. But, when I insert my Final Cut Studio Installation Disk, it asks for my serial number, which I put in - but the 'Continue' button never lights up.
I also went to the website to register my product so that I could download the 5.1.2 update...entered my serial number and it told me it was an invalid number.
I'm entering the exact same number in the exact same way that I originally did on my Powerbook. Is there anything I can do? The only time the serial number has ever been on another computer before was when it was on my home computer, but I hadn't registered it, and then I removed it - so my laptop is the only computer I have Final Cut on. Why isn't this working? It's quite frustrating when I need an edit for my class tomorrow and I can't work on it.
Thank you for any help, suggestions, or support.

That's good to know, thank you very much. I was wanting to use it on my G5 this Summer (same one I installed it in before).
I'm entering the fields exactly as I had originally entered them, and I'm using the right letter/number (O/0 or I/1) when applicable. But it still won't let me continue.
I even trashed the 'Final Cut Studio System ID' on my PowerBook, then opened Final Cut, it asked me for the serial number - I entered it, exactly as I had been trying with the disk, and it worked. But it still won't work on the installation disk.
Also, I did a bit of editing on the PowerBook (5.1.4) and then moved to my school's computers (5.1.2) expecting them not to be able to open the file, but it did. I know that 5.1 and 5.1.1 weren't compatable with 5.1.2, so how is 5.1.2 compatable with 5.1.4? Regardless, this is good news.

Can't use Final Cut Express Export Using Quick Time Conversion with iDVD.

I am using iDVD 08v 7.0.4 and until 3 days ago I could import and create iDVD's using Final Cut Express export using Quick Time Conversion. There was an update that downloaded for iDVD. Since then, I can only use Final Cut Express Exports that is a self contained Quick Time Movie.
I have never had this kind of apple and apple problem. I am disappointed that I'm having apple issues like this.

Are you on latest 10.5.x release and latest FCE updates? Your info line says 10.5.1 and you didn't list FCE version. Not saying that will fix problem, but might help. You also might want to explain how you did your Quicktime conversion.

Final Cut and Reinstall

Hi,
3 hour project that I've been working on for months.
Experienced system very slow and crashing a lot. so I listened to Apple and cleaned up HD. In the process I deleted about 4 apps that I didn't think had anything to do with FCP. Since I've done that and ran a defrag of the HD FCP won't open any of my projects. I get "This project is unreadable or may be too new for this version of Final Cut" or "Wasn't able to open project" My whole system is running slow - get turning circle on everyting.
I'm thinking I need to uninstall my whole system as in the aps I deleted - garage band and I forgot the others - small programs that I think FC must have used relative to the path of my files in FC. What are your thoughts? If I uninstall I take it there are precautions so as not to lose projects. I have FCP the version before the last version, have a Mac OSx 10.6.8, 2.16 GHz INtel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAm. My project files are on external HDs. What do you think?
Thanks,
joe

Wed, July 4, 2012 3:00:32 PM
Re: [Final Cut Studio] - Re: Final Cut and Reinstall [8rnjp2-2ywwj-b7h77]
From:
Joseph Zabrosky <[email protected]>
To:
discussions-replies <[email protected]>
What version of FCP are you running? fcp7
The Digital Rebellion stuff is great.
I do have Pro Maintenance Tools, which is $140 i think.
http://www.digitalrebellion.com/promaintenance/
that has the 2 apps listed above, plus a project FCP repair tool, corrupt clip finder, etc.
This is your only copy of the project? No, when search project on my external where all my files aree a folder of one of the latest versions comes up with numerous fcp files that were saved at different times and dates. That would be the autosave vault, but it's not in the folder autosave vault.
No backups at all?
Are you sure the autosave lkocation hasnt been changed, and there might be versions somewhere else?
Did you add any new pugins at all? Did you do any software updates before things went south? NO
Without knowing what you deleted then you might need to wipe the system & re-install everything.
if you do this remeber to BU your files & any apps or plugins that are digital files & not on install discs that you have bought, or downloaded.
Cloning the HD as you said in your last email will take care of this?

Final Cut and Pro Tools

I recently installed Final Cut Express on my iMac. I also have Pro Tools 7.4.2 on my machine. When I went to open Final Cut, everything slowed to a screaming halt. One problem was that Final Cut was latching on to my Waves bundle for Pro Tools when it opened. After that, when I restarted my computer it took over five minutes for the desktop to load up. Apple tech support walked me through removing Final Cut, and reinstalling Leopard, but I'm wondering if there's a way for Final Cut and Pro Tools to co-exist. I'm not opening or using them at the same time. 2 BG

The apps should certainly coexist peacefully. If you want to prevent Final Cut from loading your Waves bundle (or any other Audio Units you have installed) then you have to move these units in and out of your /Library/Audio folder. Perhaps worth investigating would be the free AU Manger app for handling these plugs as sets

Final Cut and Motion Roundtripping- FCS2 vs FCS3

I have been getting slow performance and general inefficiency working with Motion files inside of Final Cut with FCS2. I'm working on an Intel based MacBook Pro with 3GB of Ram and Radeon x1600 graphics card. I have been working in HDV1080p30 and only work within one application at a time (I close Motion before going to Final Cut and vice versa).
My question is: Can I expect better performance by upgrading from FCS2 to FCS3 on the same system? I will upgrade immediately if my system can handle the new Final Cut Studio more efficiently.

There are so many possibilities as to why your computer isn't as fast as you want it to be, or as fast as it once was. The amount of data on your drives, overhead of the OS, port malfunction, corrupt preferences, corrupt files on drives (even files you're not using can affect performance, just by being there), age of computer, conflicting 3rd party apps and plug-ins, failing hard drive, failing processor, failing graphics card, failing SMC or PMU, and many many more. There is no way to tell if upgrading to a new version of any software is going to fix your problem. Snow Leopard has less overhead than Leopard, so a new OS might help, but unless you have an Intel Mac, you can't do this.
My guess is, just buying a new set of apps is not the way to go. You need to bench test your machine and find out what, if anything, is misbehaving, and start from there. If it's as simple as not going as fast as you want it to go, but nothing is wrong, then you either need to accept that you're operating at full capacity, or buy a new computer.

I can't be the only person who has this problem - when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that

I can't be the only person who has this problem with iCal- when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that.

Yeah that works, but, it involves a click on the event, a click on edit, a click on the date, keystrokes, plus, since you can't see the next month you have to have a calendar in front of you so as to put it to the right date. It's easier just to cut it and advance the month and paste it, once you are in the right month you can move it around helter skelter willy nilly no problems. Although now that you mention it I will try it, maybe it is easier than cut and paste as I don't really care about the date, as long as it gets moved into the right month I can drag it around all I want.

Using still images with Final Cut (and the apple suite in general)

I have had a re-occuring and long term problem that has caused me many lost hours of head scratching and work arounds, and as of yet I have not been able to come up with a good solution.
Its to do with integrating still images with the Final Cut suite.
If I receive a high quality image from a client to use in their video and I then try importing it into Final Cut and animating it, it always ends up looking like a pile of ahem. Often I will get "swimming" lines appear across fine detail on the image, and parts of it will flicker as it moves across the screen. For instance, if I have a picture of some blinds or other fine detail (especially horizontal and vertical lines), when I add a grow and throw movement to it the detail will become very noisy - buzzing and flickering like mad.
I have found I can counter this by resizing the image in photoshop to a resolution closer to SD video (700w or 500h) - but I always end up losing detail, and the flickering and noise is only reduced, not eliminated. Other things that have helped are blur effects applied at a very low level, like 0.5 blur, so its not noticeable visually, but Final Cut seems to treat it differently and quieten the noise and flicker down.
However, all of these workarounds are ultimately still giving a reduced quality product.
Also, this problem is not necessarily constrained to Final Cut, I am currently fighting DVD Studio Pro because it is murdering the text quality in a stills slideshow I am creating - and in this situation there is no animation being applied. No matter what file type (psd, jpeg, tiff, png...) or size I output the text and images from Photoshop in, the moment DVD studio pro gets hold of it, it turns to cripe.
For a while I was putting it down to the fact that I usually edit in SD (PAL) formats, and there just wasn't the resolution available to reproduce fine detail. However, I do often see other people achieving pin-sharp fine detail on still images and text in SD formats (the Apple templates are a good example)
So, my question to you, oh great and high boffins, if you are dealing with still images and text, how do you do it? How do you work around any noise problems you have, and how do you produce those pin-sharp images (both moving and still) I see in other professional productions?
Quad G5 Mac OS X (10.4.8)

still images with too high a resolution will always cause problems. this is due to the detail of the image being finer than the scanline of the tv can display ... obviously this will caise the image to flicker as these details alternately appear and disappear as and when the scanline can display them. as you have discovered, the answer is to apply a very small blur, the effect being that the detail is spread by the blur such that the scanline can dislay it correctly.
text issues are often rooted in the same problem ... unless the text is placed very carefully (whole even number on the y axis) then the quality may be impaired due to the resulting interlacing/scanline issues

Is it possible to set up my iPad as a video camera and broadcast it real time to a TV via apple TV?

Is it possible to sey up my iPad as a video camera and broadcast it real time to a TV via Apple TV?

Use airplay to send what is on the iPad to your tv.
Since ipad2, you can display exactly what is on the ipad screento a tv via an adaper or via airplay through an apple TV.
http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
General overview but lacks specifics.
http://accelerateyourmarketing.com/home-video-studio/
Video
https://www.youtube.com/watch?v=ce5FVJi0Uxw

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? i´m from Mexico i speak spanish

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? how i can install this app in Final Cut? this app cost me money and not is working to me, i am disappointed sorry if a write bad, i´m from Mexico i speak spanish

This is a user2user board for FCPX - maybe better you discuss your issues with the makers of that 'plug in'
Seems for me a bit 'fishy', isn't it? - other professional plug-in makers deliver with an installer... That advice at AppStore, how to install it, is ... rare:
How install it ? – click the launch button. Motion 5 will start itself. When Motion is open click save as. Write a generator name - Lens Flare and choose category RGB HOUSE or make it. Click Publish and you are done. If you don’t have Motion 5 look at support site - how to install in FCP.
How it works ? – In Final Cut Pro you will find in Generators RGB HOUSE group, where will be Lens Flare. Drag this generator above all clips in timeline. When it’s there remember to change blending mode to Screen (in video section). You can adjust color, steak color, glow, intensity, scale - apacity and blur of artifacts, position. Any parameter could be stored as a keyframe, so You can easily animate the flare.
so, I don't speak Spanish, lets have some fun with translate.google...:
Cómo instalarlo? - Haga clic en el botón de inicio. Motion 5 comenzará Misma. Cuando el movimiento está abierto clic en Guardar como escribir un generador de nombres -. Resplandor del objetivo y seleccionar categoría RGB CASA o hacerlo. Haga clic en Publicar y ya está. Si usted no tiene el movimiento 5 vistazo a sitio de soporte - cómo instalar en FCP.
Cómo funciona? - En Final Cut Pro se encuentra en el grupo generador RGB CASA, donde serán destello de lente. Arrastre este generador por encima de todos los clips en la línea de tiempo. Cuando es allí te acuerdas de que cambiar el modo de fusión a la pantalla (en la sección de vídeo). Usted puede ajustar el color, color carne, brillo, intensidad, escala - falta de definición apacidad y artefactos de su posición. Cualquier parámetro podría almacenarse como un fotograma clave, por lo que puede animar fácilmente la antorcha.
Hope it makes at last a little sense... I don't trust these automatic translators
(the German translation is ... awesome funny!)
Finally: it's from 2012! Needs probably an update - contact the dealer!

TWO VERY TOUGH SUPPORT PROBLEMS FACED AND SOLVED IN REAL TIME

pls any body post two very tough support problems faced and solved in real time.
my id is: [email protected]

Hi Priya.,
For example client wants his customer legacy number in XD01 master data which is not there in Standard SAP.we can satisfy the requirement with USER EXIT
2) If the client wants customer Phone number in the sales order we can use user exit to satify the requirement
These are not provided in Standard SAP & we should work out on alternative way
REWARD if helpfull
Thanks & Regards
Narayana

Final cut and hardwear acceleration (real time Rendering )

Similar Messages

Maybe you are looking for