FINAL CUT AND IMOVIE

Is it possible to export an IMOVIE into FINAL CUT PRO?

Well, I think I must be using a Universal version of iMovie, as I'm using iMovie HD 6 ..which, as I understand it, is a Universal version ..which means that the iMovie 'package' contains two versions of the software: one which runs under PowerPC processors, and one which runs under Intel processors. Depending on which processor(s) you have in your Mac, the appropriate version of the program runs.
I don't have an Intel Mac (..see my Macs in teeny type at the bottom of my posts..) so although I have - like everyone else - the Universal iMovie HD 6, my Macs run just the PowerPC version of iMovie, and ignore the Intel code.
As for FCP; I don't know: I'm not at my FCP Mac at the moment. I think I have version 3.5 HD ..it's not the latest Universal version, but it's 'Final Cut Studio' with all the trimmings, so it may be 3.5 or 4.5 ..I'm not sure which.
I don't think I have the Universal version of FCE HD, but - again - I can't remember which version it is.
Here's Apple's page of Technical Specs for FCP, and according to all that it ought to handle material from iMovie & FCE ..although I see that it doesn't say, any longer, "Imports iMovie projects", or whatever. But you seem to be trying to import an FCE project, not an iMovie project, into FCP, from what you've just written.
All I can say is that (a) I have no trouble doing this; (b) whether or not the program is a Universal shouldn't matter at all: same program, it's just different code to achieve the same ends; (c) you don't say how you passed the project from FCE to FCP ..I don't know if you Exported it from FCE, or if you simply tried opening the FCE project with FCP. And if you simply tried opening the project, I don't know how you carried over the FCE project from the first Mac to the second; (d) note that I didn't Export the project, pictured above, from iMovie to FCP ..that's to say, I didn't Import the project into FCP: I simply clicked on File and Open in FCP, and then clicked on the iMovie project itself. FCP opened the actual project, with all the iMovie files inside. I didn't Export it from iMovie first, and thus 'package' it in some extra way!
I don't think I can help more until (1) you say exactly how you passed the project from one program (and Mac) to the other, and (2) until I'm back at my FCP Mac in a few days' time.
However, this seems to be an FCE/FCP problem, not an iMovie/FCP problem (..from what you've just written..) so why not post a question in the FCP Discussions forum? There may be more users with experience of FCE-to-FCP there.
..But I doubt that it's an issue of whether either, or both, of the programs is, or are, Universal Binary: it may be more of a problem of HOW you're passing the material from one program to another.

Similar Messages

Final cut and iMovie locking up on import

new MAc Pro and Imovie and final cut trial version both locking up on import. anyone else seeing this?

With the new Version, you have to initiate the transfer in iMovie. Open iMovie and select FILE/SEND TO FINAL CUT PRO.
See this part of HELP for more details.
https://help.apple.com/imovie/mac/10.0/help/index.html?localePath=en.lproj#movcb f7e2a3f

Final cut and imoviei

I know that in the final cut pro the projects occupies much less space, but aside from that. what differences there is between final cut and imovie?, can a professional use imovie?
Thanks

That webpage has been taken down, but an older version exists here:
apple.com/au/finalcut
Otherwise, if you are an iMovie user, and are not intending to go into this professionally, FCE is definitely the way to go. There is a significant learning curve, but it should more than suit your needs.

Ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?

ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?

Your media is stored in Final Cut Events folder > "name of event" > original media. The Final Cut Events folder is in your movies folder or at the root level of an external drive if you are using one to store your media. Simply open iMovie and under file menu select import movies. Navigate to the original media folder and import your clips to Imovie event library.

Can't capture from my cannon video camera to Final Cut or iMovie.

Hi. I can't capture from my cannon video camera to FInal Cut or iMovie. ANy help would be greatly appreciated. I don't think my iMac is recognizing the camera. I was told I don't need a firewire, that USB would work if I'm just capturing. If I need a firewire what kind (the one I was sold didn't fit). I'm getting an "unable to locate external device message". Not sure of next steps to try. Thanks.
Computer= iMac 21.5-inch: 2.5GHz
            2.5GHzQuad-Core Intel Core i5
            1920 x 1080resolution
            4GB (two 2GB)memory
            500GB harddrive1
                        AMDRadeon HD 6750M with 512MB
Processorand Memory -
Powered by a quad-core Intel Core i5 or i7 processor and DDR3memory.
Connectionsand Expansion
SuperDrive, SDXC card slot, audio in, audio out, USB 2.0,FireWire 800, Thunderbolt, Gigabit Ethernet.
Video camera = Canon Vixia HV40
Standard Definition or High Definition
High Definition
Power Consumption
4.3 W
Television System
NTSC
Video Recording system
MPEG2
Image Sensor
1/2.7-inch CMOS, RGB Primary Color Filter
Total Pixels
Approx. 2.96 Megapixels
Effective Pixels
Tape: HD/DV (16:9) mode: Approx 2.07 Megapixels (1920x1080) DV (4:3) mode: Approx 1.55 Megapixels (1440 x 1080) Card: (16:9) mode: Approx. 2.07 Megapixels (1920 x 1080), (4:3) mode: Approx. 2.76 Megapixels (1440 x 1080)
Tape Format
HDV / DV
Maximum recording Time
SP: 80 minutes, HDV, DV LP: 120 minutes DV
Lens
Zoom Ratio 10x Optical / 200x Digital Focal Length f=6.1-61mm (35mm equivalent: 43.6 - 436mm) Zoom Speed Variable / 3 Fixed Zoom Speeds Max. F/Stop f/1.8-3.0mm (when tapes are used)
Focusing System
Instant AF, TTL (through the lens)
Manual Exposure
Yes
Programmed AE
Auto, Program, Av, Tv, CINE, Portrait, Sports, Night, Snow, Beach, Sunset, Spotlight, Fireworks
Max Shutter Speed
Movie: 1/2000, Still image: 1/500
Auto Date/Time
Yes
Record Search/Review
Yes
Focusing System
10 mm (wide) / 1m (tele)
White Balance
Auto, Daylight, Shade, Cloudy, Tungsten, Fluorescent, Fluorescent H, Manual
Frame Rate
60i, Native 24p Progressive (records at 24p), 24p Progressive (records at 60i), 30p Progressive (records at 60i)
Minimum Illumination
0.2 lx (Night Mode)
Image Stabilization
SuperRange Optical (lens shift)
Filter Diameter
43mm
Viewfinder
Widescreen 0.27-inch Color Viewfinder / (Approx. 123,000 dots)
LCD Screen
2.7-inch Widescreen LCD (Approx. 211,000 dots)
Recording Media
High Definition Mini DV (recommended) (63 min) or MiniDV cassette
USB Terminal
USB 2.0 Full Speed
Video Terminal
component (output), composite (output)
Audio
DV: 16 bit (2ch) 48 kHz 12 bit (4ch) 32 kHz 4ch synchronous recording not possible HDV: MPEG1 Audio Layer II (2 ch) (4-channel playback of tapes containing 4-channel recordings possible)
Accessory Shoe
Advanced
Supplied Video Editing Software
None
HDMI Terminal
HDMI Type A (19 pins) Connector (output)
Microphone Terminal
3.5 mm stereo mini-jack
AV Mini Terminal/Headphone Terminal
3.5 mm 4 pole mini-jack (video/audio input and output)
Dimensions
(W X H X D) 3.5 x 3.2 x 5.4 in. (88 x 82 x 138mm)
Weight (not including lens and battery pack)
1.2 lbs. (535g)
Weight
1.4 lbs. (615g)

Forget USB for capturing from tape. USB is only for stills from a Tape Based camera.
You require a firewire cable.
The camera connection end will be four pin and the Mac is nine pin to the 800 port.
Ask for a 9 to 4 pin firewire cable. Sounds like you have the wrong one as they can also be 4 to 4 or 4 to 6 pin!!
Also you will need the correct Easy Setup in FCE so FCE talk to the camera, exactly which one depends on what type of footage is being sent to FCE from the camera during capture.
Al

Just Curious...when editing small projects do you use Final Cut or iMovie?

I need to learn how to edit in final cut, just wondering how much of a learning curve there is and what people's preference would be...editing in FC or iMovie 09
thanks

Sim333 wrote:
..when editing small projects do you use Final Cut or iMov .. how much of a learning curve there is ..
small, quick 'n dirty = iM09
advanced, elaborated (=compositings, 'grading', SpecialFX) = FC/e4
esp, from iM09>>FC the learning curve is extreme! FC is a professional tool, no 'one click done', needs a lot of background knowledge, how things are done (=not the app, the concept ..)
I'm using both, simultanously for some projects - iM09's 'skimming' is an excellent tool for a 'rough pre-cut', .. and I LOVE the green-screen effect in iM, compared to less-intuitive color-key in FC/e ...
but, the more you get used to FC's interface, the faster you're working with it. => I would love to see an optional 'quick edit mode' in FC/e as in iM! both apps are from the same master-mind, greetings to Randy U.!

Final Cut and After Effects "file is busy"

Hello All-
I am running Final Cut Pro 5.1.4 and After Effects 7.0.1 Pro (on OS 10.4.8) and I have a question. I have a series of After Effects animated DV Quicktime clips edited together in Final Cut, and when I make changes to the After Effects project files and try to rerender, I get an error:
After Effects error: unable to overwrite - file is busy (delete) (-47) ( 3 :: 3 )
It's like Final Cut is "holding onto" the files and not allowing After Effects to rerender them. If I close down Final Cut, I can rerender just fine, but this gets real annoying closing it down and restarting it every time I need to rerender a clip. The problem is, because of my workflow, I need to do this dozens of times a day with clients in the room and I'm spending a lot of time closing and restarting Final Cut over the course of a day... is there way to do this without closing down Final Cut?
I assigned After Effects to be the "External Editor" for "Video Files", and used Final Cut's "Open In Editor" command. It sends the quicktime file to After Effects (not exactly what I want) and you would think that at this point Final Cut would have relenquished its access to the file so that I could rerender in After Effects, but nope, I still get the error. I have tried this with the User Preference setting "Always Reconnect Externally Modified Files" both on and off, no difference. I have also tried "Embed Project Link" in After Effects's quicktime output options, but this didn't help anything (I believe this only affects other Adobe apps).
The weird part of this is that when I drop a Photoshop file onto the Final Cut timeline, I can do "Open in Editor", it throws it to Photoshop, I can alter it and save with no problem, and pop back into Final Cut and it will be updated. But no such luck with Quicktime files and After Effects.
Let me know if there is a solution to this, or if I am stuck having to shut down Final Cut every single time I need to rerender one of the After Effects animation clips in the timeline.
- Bob Wilson
MacBook Pro 2.33ghz Core 2 Duo 15" Mac OS X (10.4.8) 3 gigs ram, 160 gig HD

What i have to suggest is more of a work around than it is a solution. i've had this problem off and on as well. What i do is add a number to the name of the newly rendered file, (ie. "monkey_throwspoo2.mov") import that file into FCP, open it in the viewer, and then copy it (apple + c). Provided it's the smae length as the previous file, you can right click on the previous file in the timeline and paste attributes, making sure to click on the content button for video (and audio if there is any). This should replace the old file in the timeline with the new one. Granted, you end up having a bunch of files that you're not using, but it's faster than restarting Final Cut (and looks more like it's something you're doing on purpose rather than a problem with the program to your clients). Hope this helps.
Craig

Using still images with Final Cut (and the apple suite in general)

I have had a re-occuring and long term problem that has caused me many lost hours of head scratching and work arounds, and as of yet I have not been able to come up with a good solution.
Its to do with integrating still images with the Final Cut suite.
If I receive a high quality image from a client to use in their video and I then try importing it into Final Cut and animating it, it always ends up looking like a pile of ahem. Often I will get "swimming" lines appear across fine detail on the image, and parts of it will flicker as it moves across the screen. For instance, if I have a picture of some blinds or other fine detail (especially horizontal and vertical lines), when I add a grow and throw movement to it the detail will become very noisy - buzzing and flickering like mad.
I have found I can counter this by resizing the image in photoshop to a resolution closer to SD video (700w or 500h) - but I always end up losing detail, and the flickering and noise is only reduced, not eliminated. Other things that have helped are blur effects applied at a very low level, like 0.5 blur, so its not noticeable visually, but Final Cut seems to treat it differently and quieten the noise and flicker down.
However, all of these workarounds are ultimately still giving a reduced quality product.
Also, this problem is not necessarily constrained to Final Cut, I am currently fighting DVD Studio Pro because it is murdering the text quality in a stills slideshow I am creating - and in this situation there is no animation being applied. No matter what file type (psd, jpeg, tiff, png...) or size I output the text and images from Photoshop in, the moment DVD studio pro gets hold of it, it turns to cripe.
For a while I was putting it down to the fact that I usually edit in SD (PAL) formats, and there just wasn't the resolution available to reproduce fine detail. However, I do often see other people achieving pin-sharp fine detail on still images and text in SD formats (the Apple templates are a good example)
So, my question to you, oh great and high boffins, if you are dealing with still images and text, how do you do it? How do you work around any noise problems you have, and how do you produce those pin-sharp images (both moving and still) I see in other professional productions?
Quad G5 Mac OS X (10.4.8)

still images with too high a resolution will always cause problems. this is due to the detail of the image being finer than the scanline of the tv can display ... obviously this will caise the image to flicker as these details alternately appear and disappear as and when the scanline can display them. as you have discovered, the answer is to apply a very small blur, the effect being that the detail is spread by the blur such that the scanline can dislay it correctly.
text issues are often rooted in the same problem ... unless the text is placed very carefully (whole even number on the y axis) then the quality may be impaired due to the resulting interlacing/scanline issues

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? i´m from Mexico i speak spanish

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? how i can install this app in Final Cut? this app cost me money and not is working to me, i am disappointed sorry if a write bad, i´m from Mexico i speak spanish

This is a user2user board for FCPX - maybe better you discuss your issues with the makers of that 'plug in'
Seems for me a bit 'fishy', isn't it? - other professional plug-in makers deliver with an installer... That advice at AppStore, how to install it, is ... rare:
How install it ? – click the launch button. Motion 5 will start itself. When Motion is open click save as. Write a generator name - Lens Flare and choose category RGB HOUSE or make it. Click Publish and you are done. If you don’t have Motion 5 look at support site - how to install in FCP.
How it works ? – In Final Cut Pro you will find in Generators RGB HOUSE group, where will be Lens Flare. Drag this generator above all clips in timeline. When it’s there remember to change blending mode to Screen (in video section). You can adjust color, steak color, glow, intensity, scale - apacity and blur of artifacts, position. Any parameter could be stored as a keyframe, so You can easily animate the flare.
so, I don't speak Spanish, lets have some fun with translate.google...:
Cómo instalarlo? - Haga clic en el botón de inicio. Motion 5 comenzará Misma. Cuando el movimiento está abierto clic en Guardar como escribir un generador de nombres -. Resplandor del objetivo y seleccionar categoría RGB CASA o hacerlo. Haga clic en Publicar y ya está. Si usted no tiene el movimiento 5 vistazo a sitio de soporte - cómo instalar en FCP.
Cómo funciona? - En Final Cut Pro se encuentra en el grupo generador RGB CASA, donde serán destello de lente. Arrastre este generador por encima de todos los clips en la línea de tiempo. Cuando es allí te acuerdas de que cambiar el modo de fusión a la pantalla (en la sección de vídeo). Usted puede ajustar el color, color carne, brillo, intensidad, escala - falta de definición apacidad y artefactos de su posición. Cualquier parámetro podría almacenarse como un fotograma clave, por lo que puede animar fácilmente la antorcha.
Hope it makes at last a little sense... I don't trust these automatic translators
(the German translation is ... awesome funny!)
Finally: it's from 2012! Needs probably an update - contact the dealer!

Can I share files from other programs or just Adobe apps files. I work with Final Cut and Premiere X

Can I share files from other programs or just Adobe apps files. I work with Final Cut and Premiere X.? Need to share files up to 6GB.
I need to know if the 20 gb limit is about all that I share, or if it's just about whatis in the clouds. If I take, recover my limit?
The speed of upload e download is good?

The Creative Cloud file storage could be used for video assets but speed and performance might vary based on location. I would suggest you testing it out yourself using your Adobe ID before subscribing. Performance would not change after you joined.
-Dave

Final Cut and Serial Number

I had Final Cut Studio 5.1 intalled on my Powerbook G4. Then, my computer was sent in and I was without for a month. So while it was away, I put Final Cut Pro on my home computer to finish my film for school. When I got my laptop back, I tried uninstalling Final Cut Pro on my home computer, but didn't have the installation disk, so I just simply trashed the 'Final Cut Studio System ID' on my home computer so that I couldn't use the program.
So, now Final Cut works fine on my Powerbook. But, I accidently updated to 5.1.4 - while my school computers are still on 5.1.2. So I wanted to uninstall Final Cut, and then re-install it so that the applications would be compatable. But, when I insert my Final Cut Studio Installation Disk, it asks for my serial number, which I put in - but the 'Continue' button never lights up.
I also went to the website to register my product so that I could download the 5.1.2 update...entered my serial number and it told me it was an invalid number.
I'm entering the exact same number in the exact same way that I originally did on my Powerbook. Is there anything I can do? The only time the serial number has ever been on another computer before was when it was on my home computer, but I hadn't registered it, and then I removed it - so my laptop is the only computer I have Final Cut on. Why isn't this working? It's quite frustrating when I need an edit for my class tomorrow and I can't work on it.
Thank you for any help, suggestions, or support.

That's good to know, thank you very much. I was wanting to use it on my G5 this Summer (same one I installed it in before).
I'm entering the fields exactly as I had originally entered them, and I'm using the right letter/number (O/0 or I/1) when applicable. But it still won't let me continue.
I even trashed the 'Final Cut Studio System ID' on my PowerBook, then opened Final Cut, it asked me for the serial number - I entered it, exactly as I had been trying with the disk, and it worked. But it still won't work on the installation disk.
Also, I did a bit of editing on the PowerBook (5.1.4) and then moved to my school's computers (5.1.2) expecting them not to be able to open the file, but it did. I know that 5.1 and 5.1.1 weren't compatable with 5.1.2, so how is 5.1.2 compatable with 5.1.4? Regardless, this is good news.

NEED HELP Deciding. new final cut and a powerpc4

I have a power mac G4 and I want to know will the new final cut package work on it? My pc has a radeon 9000 pro, dual 1.25 processors,, memory 1.25.
i just want to know if final cut and the other programs will work on it. I do not do HD and when i do i will buy another but for Sd is this ok to run and buy the new fc.
thanks everyone who can help

I'd think you will be able to run FCS 2. Your computer is above all of the minimum specs, only wild card here is your graphics card. It has enough VRAM ... just not listed in the compatible cards. Bet it works OK though. Look at the Motion and Color minimums. FCP will work without a hitch in any event, and so should compressor, LiveType, and DVD SP. You could upgrade it if you find it lacking but I'd give it a go with the card you have to see if you're OK first.
http://www.apple.com/finalcutstudio/specs.html
Jerry

How to Uninstall older version of Final Cut and Motion

Hello
I have a older academic version of Final Cut and Motion. I ordered a Full blown version of Final Cut Studio 2 that should arrive this week. How do I uninstall my old version of software? I don't want them conflicting with the new version.
My other question deals with performance. I'm running a Dual 2.5GHz G5 with 6G of ram. Video Board is the ATI x800XT. Will this system work for editing HDV or am I going to need to buy a new Intel based computer? I really don't want to spend 4K for a new system.
Thanks
Bob M

have a gander a Jon Chappel's FCS Remover over at Digital Rebellion
http://www.digitalrebellion.com/fcs_remover.htm

Final Cut and Reinstall

Hi,
3 hour project that I've been working on for months.
Experienced system very slow and crashing a lot. so I listened to Apple and cleaned up HD. In the process I deleted about 4 apps that I didn't think had anything to do with FCP. Since I've done that and ran a defrag of the HD FCP won't open any of my projects. I get "This project is unreadable or may be too new for this version of Final Cut" or "Wasn't able to open project" My whole system is running slow - get turning circle on everyting.
I'm thinking I need to uninstall my whole system as in the aps I deleted - garage band and I forgot the others - small programs that I think FC must have used relative to the path of my files in FC. What are your thoughts? If I uninstall I take it there are precautions so as not to lose projects. I have FCP the version before the last version, have a Mac OSx 10.6.8, 2.16 GHz INtel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAm. My project files are on external HDs. What do you think?
Thanks,
joe

Wed, July 4, 2012 3:00:32 PM
Re: [Final Cut Studio] - Re: Final Cut and Reinstall [8rnjp2-2ywwj-b7h77]
From:
Joseph Zabrosky <[email protected]>
To:
discussions-replies <[email protected]>
What version of FCP are you running? fcp7
The Digital Rebellion stuff is great.
I do have Pro Maintenance Tools, which is $140 i think.
http://www.digitalrebellion.com/promaintenance/
that has the 2 apps listed above, plus a project FCP repair tool, corrupt clip finder, etc.
This is your only copy of the project? No, when search project on my external where all my files aree a folder of one of the latest versions comes up with numerous fcp files that were saved at different times and dates. That would be the autosave vault, but it's not in the folder autosave vault.
No backups at all?
Are you sure the autosave lkocation hasnt been changed, and there might be versions somewhere else?
Did you add any new pugins at all? Did you do any software updates before things went south? NO
Without knowing what you deleted then you might need to wipe the system & re-install everything.
if you do this remeber to BU your files & any apps or plugins that are digital files & not on install discs that you have bought, or downloaded.
Cloning the HD as you said in your last email will take care of this?

Final Cut and Pro Tools

I recently installed Final Cut Express on my iMac. I also have Pro Tools 7.4.2 on my machine. When I went to open Final Cut, everything slowed to a screaming halt. One problem was that Final Cut was latching on to my Waves bundle for Pro Tools when it opened. After that, when I restarted my computer it took over five minutes for the desktop to load up. Apple tech support walked me through removing Final Cut, and reinstalling Leopard, but I'm wondering if there's a way for Final Cut and Pro Tools to co-exist. I'm not opening or using them at the same time. 2 BG

The apps should certainly coexist peacefully. If you want to prevent Final Cut from loading your Waves bundle (or any other Audio Units you have installed) then you have to move these units in and out of your /Library/Audio folder. Perhaps worth investigating would be the free AU Manger app for handling these plugs as sets

FINAL CUT AND IMOVIE

Similar Messages

Maybe you are looking for