Final Cut and Photoshop CS3 extended

I've searched google and had no luck with this whatsoever.
I've opened an exported video sequence into Photoshop CS3 extended. (MOV, HDV 1080i60) In FCP6 the sequence had a time code of 0:02:03 whereas in Photoshop CS3 it is recognized as 0:02:02. It seems as if Photoshop is dropping a frame. Regardless, looking over my original MOV and the open Photoshop document I only have 51 total frames.
This looks like Photoshop and FCP6 see frames differently. When I export my video from Photoshop, Quicktime sees all 51 frames still there. When I pull the video back into FCP6 the timecode for the sequence is now 0:02:02 (just like Photoshop sees it) and it drops the last frame.
The frame is there! I can see it when I go over the video in Quicktime. For some reason FCP6 is refusing to show that last frame and will only display a timecode of 0:02:02 for that clip!
What am I to do? How do I get FCP6 to show that last frame?
Thanks heaps, in advance.

"I've opened an exported video sequence into Photoshop CS3 extended. (MOV, HDV 1080i60)."
do you mean you've imported an Image Sequence (movie exported from FCP as individual image files eg- tiffs)...
"In FCP6 the sequence had a time code of 0:02:03 whereas in Photoshop CS3 it is recognized as 0:02:02."
Where in Photoshop are you reading timecode??? Or are you just counting the individual images?
"It seems as if Photoshop is dropping a frame. Regardless, looking over my original MOV and the open Photoshop document I only have 51 total frames."
If the original movie was at 1080i60, and your clip is 02 seconds and 2 frames, that would imply you should have at least 60 images (29.97 (drop-frame?) / 30fps x 2 seconds)
"This looks like Photoshop and FCP6 see frames differently. When I export my video from Photoshop, Quicktime sees all 51 frames still there. When I pull the video back into FCP6 the timecode for the sequence is now 0:02:02 (just like Photoshop sees it) and it drops the last frame."
Now i'm really confused...
"The frame is there! I can see it when I go over the video in Quicktime. For some reason FCP6 is refusing to show that last frame and will only display a timecode of 0:02:02 for that clip!"
Yup... you got me... I have no idea... I think there is a non-dropped-frame timecode conflict in the Image Sequence(?) export from FCP and way PS is interpreting these images...
I have the good fortune of working in PAL-land, so I'm not too knowledgeable on what i think is your problem... hopefully someone from NTSC-land will chip in and help you out.
J
Message was edited by: James M.
Message was edited by: James M.

Similar Messages

Final cut and photoshop

I want to use photoshop to do 3D black&white photos, as per Robert Evans doc. Since I've never used Photoshop, which version is best for that 3D effect. Final product will be 4 minute FCP7 video. Not sure how Photoshop integrates with FCP as it is part of Adobe edit software.

Thanks, don't have Photoshop and rarely would use it, there's Photoshop Elements which is more affordable for me, can it do that 3D effect (what's it's proper title?). I use Picassa, MS Publishing and a few others so I should be able to play with Photoshop?

Problem Reading Adobe Photoshop CS3 Extended In Windows

I have Windows 7 and Photoshop CS3 Extended; can't read .psd file; error says not a supported file type; need to work with layers. When installed, received a Successful message upon installation. A solution to reading .psd files in Windows?

Thanks to both of you for responding. The files I am referring to are loaded to my C drive from ADOBE PHOTOSHOP CS3 "CLASSROOM IN A BOOK" tutorial. On the cover, it says "The official training workbook from Adobe Systems". I don't know what to do at this point. I'm ok with Html. Just need photoshop knowledge added and understand usde of .psd files provides a means to work with layering. Any suggestions?

I have Photoshop CS3 Extended and use it on my Windows PC Having bought a Nikon D5200 I have been unable to use the camera on the raw settin g with Photoshop.I have downloaded the Camera Raw 8bi dowload as advised but my computer Windows 7 will not recogn

I am having difficulty opening raw images with my version of photoshop CS3 extended. I have a Nikon D5200 which according to adobe it is supported but when I try to download a camera raw patch 8bi it wont recognise the file format.Can anyone offer a solution which will enable me to use photoshop with my D5200 when shooting in raw? I have windows 7 operating system.

Thank you for your help I have already downloaded ACR 8.7 and tried to download DNG converter will have to back track on this as didnt recognise the file when I downloaded it. is the problem now that I need to change my files to DNG from NEF files before opening in photoshop?
Please be patient as I seem to have got the jist of the problem but not sure the converter is on my computer what should I be looking for?

How To De-activate and Transfer Photoshop CS3 Extended

I'm trying to de-activate my Photoshop CS3 Extended so I can uninstall it and reinstall it from my old XP computer to my new computer which is Windows 7 . There's supposed to be a tab for De-activate under the help menu but there isn't when I click on help. I have the box, Disc and license so reinstalling it should be easy if I can just get it de-activated. Thanks for any help.

Contact support to reset activations then simply install the program on your new machine.
Mylenium

IPhoto & Photoshop CS3 extended

Hello everyone, I have a question related to Photoshop, I figured this would be a good place to find an answer. In photoshop CS3 extended, using the magnetic lasso to extract part of an image, after I extract the image, how do I put it somewhere else? I cannot find an answer to this anywhere on the web, so I thought I would try here, if anyone has the answer please help, I am really trying to figure this out before I drop the cash to buy it, I am on the free trial right now and the magnetic lasso feature is the only reason I want it. Thanks

After you select the area you want with the magic lasso, do a Command-X (cut) and then Command-V (paste). Change to the arrow cursor mode and click and drag the area you selected to wherever you want it. A new layer will be created with the cut and pasted area in it.
If you're considering PS CS3 just for the lasso feature you might consider Photoshop Elements 6 for Mac. It has the same lasso feature and about 80 % of CS3's features at 1/7 the price. I wouldn't get CS3 for just that.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Adobe Photoshop CS3 Extend Error

I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
"Could not load the user measurement data point presets file because the file name was not valid."
and "Could not load the user measurement scale presets file because the file name was not valid."
Any assistance would be appreciated. Thanks!

(no reinstalling doesn't reset the preferences...) :)

Bridge not functioning in PhotoShop CS3 Extended

I deactivated Photoshop CS3 on a computer I was no longer using and installed it (CS3) another computer. I activiated CS3 on the new computer. However, when trying to use Bridge, I get a message that says that Adobe no longer supports Bridge Home and Bridge does not function on the new computer. Is there anything I can do to get Bridge to function as part of CS3 Extended?

Thanks, that worked.
In a message dated 12/28/2011 10:13:56 P.M. Eastern Standard Time,
[email protected] writes:
Re: Bridge not functioning in PhotoShop CS3 Extended
created by Curt Y (http://forums.adobe.com/people/Curt+Y) in Bridge
Windows - View the full discussion
(http://forums.adobe.com/message/4107610#4107610)

Final Cut and After Effects "file is busy"

Hello All-
I am running Final Cut Pro 5.1.4 and After Effects 7.0.1 Pro (on OS 10.4.8) and I have a question. I have a series of After Effects animated DV Quicktime clips edited together in Final Cut, and when I make changes to the After Effects project files and try to rerender, I get an error:
After Effects error: unable to overwrite - file is busy (delete) (-47) ( 3 :: 3 )
It's like Final Cut is "holding onto" the files and not allowing After Effects to rerender them. If I close down Final Cut, I can rerender just fine, but this gets real annoying closing it down and restarting it every time I need to rerender a clip. The problem is, because of my workflow, I need to do this dozens of times a day with clients in the room and I'm spending a lot of time closing and restarting Final Cut over the course of a day... is there way to do this without closing down Final Cut?
I assigned After Effects to be the "External Editor" for "Video Files", and used Final Cut's "Open In Editor" command. It sends the quicktime file to After Effects (not exactly what I want) and you would think that at this point Final Cut would have relenquished its access to the file so that I could rerender in After Effects, but nope, I still get the error. I have tried this with the User Preference setting "Always Reconnect Externally Modified Files" both on and off, no difference. I have also tried "Embed Project Link" in After Effects's quicktime output options, but this didn't help anything (I believe this only affects other Adobe apps).
The weird part of this is that when I drop a Photoshop file onto the Final Cut timeline, I can do "Open in Editor", it throws it to Photoshop, I can alter it and save with no problem, and pop back into Final Cut and it will be updated. But no such luck with Quicktime files and After Effects.
Let me know if there is a solution to this, or if I am stuck having to shut down Final Cut every single time I need to rerender one of the After Effects animation clips in the timeline.
- Bob Wilson
MacBook Pro 2.33ghz Core 2 Duo 15" Mac OS X (10.4.8) 3 gigs ram, 160 gig HD

What i have to suggest is more of a work around than it is a solution. i've had this problem off and on as well. What i do is add a number to the name of the newly rendered file, (ie. "monkey_throwspoo2.mov") import that file into FCP, open it in the viewer, and then copy it (apple + c). Provided it's the smae length as the previous file, you can right click on the previous file in the timeline and paste attributes, making sure to click on the content button for video (and audio if there is any). This should replace the old file in the timeline with the new one. Granted, you end up having a bunch of files that you're not using, but it's faster than restarting Final Cut (and looks more like it's something you're doing on purpose rather than a problem with the program to your clients). Hope this helps.
Craig

Adobe Photoshop CS3 Extended on Windows XP Professional

Topic: Selecting
I have been using Photoshop Elements 4 until I just purchased Photoshop CS3 Extended. In Photoshop Elements 4 there is a selection brush, enabling you to make pixel by pixel selection (if desired). There seems to be NO counterpart in CS3 - - which seems impossible for so powerful a program. In that most of my work involves selecting very precise points of 1 or 2 pixels, how can this be done?
Please help.
Thank you

Dave Milbut:
Thanks so much for responding . . but, unfortunately does NOT work again! I did exactly as you suggested in that I made a selection fir so that I could get a quick mask. When I double-clicked on quick mask in the tools pallet, NO options appear that say "Paint on selections" nor "paint on mask". The options is get are "Color indicates Mask Area or Selected area" and you have to chose one. The only thing you are actually choosing is whether you want the color to appear on the mask you chose or inversely to appear on the remainder of the object. The "black" brush remains the same and does not change.
If I do not learn how to make minute selections (so that I will be able to act on only tiny tiny areas) I will not be able to use this program after spending a million dollars for it. It looks like Adobe could make something so fundamental (available in Elements) available here.
Could you help me further . . . PLEASE !
Thank you.

Adobe Photoshop CS3 Extended Trial

Hi guys, I've recently downloaded Adobe Photoshop CS3 Extended. When I select the trial period for 30 days instead of buying the product, it says that Adobe cannot continue and it's having trouble loading the trial. I reinstalled it and restarted my computer, like it said, and nothing worked. Please help, I cannot afford Adobe Photoshop CS3 Extended right now, and I do not support piracy at all.

I've tried to install the program from a different directory, I think my windows installer is crashing every time i try to install it, maybe I find a working hotfix for it.
I followed these steps when i tried to install ps:
http://666kb.com/i/b1qwvm0mq1zs8iekm.jpg
First I downloaded it to C:~~/Downloads (1.)
Then I extracted this file to C:~/Desktop (2.)
Afterwards I got these files (3.)
After clicking on setup.exe this window (4.) appears and disappears right after
Danke für die bisherige Hilfe
aus der Alpenrepublik
Fabs
/edit:
To unregister and register the msi hasn't solve my problem.
Now I am trying to run the sfc /scannow command.

Adobe Photoshop CS3 Extended Activation Problem

Hi all, hoping someone can help me.
I have a legitimate hard copy of Adobe Photoshop CS3 Extended which was only recently taken out of its sealed package.
On installing and trying to activate I get an error. Now i am left with a window telling me "Registration Unsuccessful"
Any ideas how i can go about solving this? I legally own this copy and I need to use it and can't do with it deactivating.
Thanks in advance for any help given. It's very much appreciated!

Mordynak I am sorry but I find no software titles registered under the Adobe ID/e-mail address you used to post to this forum. From this discussion it sounds like you have already utilized the process listed in Find your serial number quickly.
Please contact our support team directly at Contact Customer Care. If this link still fails then I would recommend utilizing a different web browser as the current add-ons, security settings, add-ons may be preventing a chat session from being made available to you.
If you continue to face difficulties then please update this discussion.

Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses). I did a completely fresh install of Windows 7 Ultimate 64-bit. I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
Google searches aren't turning up anything. When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears. However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar. I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there. I tried uninstalling and reinstalling. I tried upgrading to CS3 10.0.1. Nothing works. The application simply freezes before it gets anywhere.
I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today. Go figure.
Edit: I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects(). The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function). There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

Log Name:      Application
Source:        Application Hang
Date:          7/17/2010 6:16:25 PM
Event ID:      1002
Task Category: (101)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: d0c
Start Time: 01cb2616be79e36f
Termination Time: 2
Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Hang" />
    <EventID Qualifiers="0">1002</EventID>
    <Level>2</Level>
    <Task>101</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
    <EventRecordID>1615</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Photoshop.exe</Data>
    <Data>10.0.1.0</Data>
    <Data>d0c</Data>
    <Data>01cb2616be79e36f</Data>
    <Data>2</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
    <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
    <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
</EventData>
</Event>
And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
My Visual Studio analysis was far more informative. All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related. I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start. That also did not work.
(And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
Edit: The timestamp above might be a little odd-looking. I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report. Mostly I just skipped that part of killing a process.

Using still images with Final Cut (and the apple suite in general)

I have had a re-occuring and long term problem that has caused me many lost hours of head scratching and work arounds, and as of yet I have not been able to come up with a good solution.
Its to do with integrating still images with the Final Cut suite.
If I receive a high quality image from a client to use in their video and I then try importing it into Final Cut and animating it, it always ends up looking like a pile of ahem. Often I will get "swimming" lines appear across fine detail on the image, and parts of it will flicker as it moves across the screen. For instance, if I have a picture of some blinds or other fine detail (especially horizontal and vertical lines), when I add a grow and throw movement to it the detail will become very noisy - buzzing and flickering like mad.
I have found I can counter this by resizing the image in photoshop to a resolution closer to SD video (700w or 500h) - but I always end up losing detail, and the flickering and noise is only reduced, not eliminated. Other things that have helped are blur effects applied at a very low level, like 0.5 blur, so its not noticeable visually, but Final Cut seems to treat it differently and quieten the noise and flicker down.
However, all of these workarounds are ultimately still giving a reduced quality product.
Also, this problem is not necessarily constrained to Final Cut, I am currently fighting DVD Studio Pro because it is murdering the text quality in a stills slideshow I am creating - and in this situation there is no animation being applied. No matter what file type (psd, jpeg, tiff, png...) or size I output the text and images from Photoshop in, the moment DVD studio pro gets hold of it, it turns to cripe.
For a while I was putting it down to the fact that I usually edit in SD (PAL) formats, and there just wasn't the resolution available to reproduce fine detail. However, I do often see other people achieving pin-sharp fine detail on still images and text in SD formats (the Apple templates are a good example)
So, my question to you, oh great and high boffins, if you are dealing with still images and text, how do you do it? How do you work around any noise problems you have, and how do you produce those pin-sharp images (both moving and still) I see in other professional productions?
Quad G5 Mac OS X (10.4.8)

still images with too high a resolution will always cause problems. this is due to the detail of the image being finer than the scanline of the tv can display ... obviously this will caise the image to flicker as these details alternately appear and disappear as and when the scanline can display them. as you have discovered, the answer is to apply a very small blur, the effect being that the detail is spread by the blur such that the scanline can dislay it correctly.
text issues are often rooted in the same problem ... unless the text is placed very carefully (whole even number on the y axis) then the quality may be impaired due to the resulting interlacing/scanline issues

Error "Licensing for this product has stopped working" when starting Adobe Photoshop CS3 Extended- XP Pro AMD; 2GB RAM

I have exhausted all known options thus far.
I started the Flexnet Licensing Service and restarted the system but the message continues to come up when lanching PS CS3 extended
After restarting computer the Flexnet Licensing Service stops again and goes into Manual mode. This also happens after a few minutes without restarting.
I also downloaded the Flexnet Licensing Recovery Kit from Adobe Support but the file stops after saying "please wait for a few moments.. ?"
I changed the setting as discribed for the Flexnt folder but the message continues to come up when PS Extended CS3 is launced.
http://kb2.adobe.com/cps/401/kb401528.html
What else is there to do. Please help me as what I can do so I can continue to use Photoshop CS3 Extended.
Thank you

I downloaded the clean Script file and followed the instructions from what the Clean Script read Me file described. The first step said to deactivate. Although I was not able to deactivate because of my original message, I followed the remaining steps.
After using the Clean Script and uninstalling Photoshop CS3 Extended and re-installing it I re-booted my computer. I also deleted the CS3 Application data files.
When I installed PS CS3 Extended the installer does not ask for the serial number on all attemps. I bought a registered copy of PS CS3 Extended. Is there another way to approch this licensing error.
Thanks.

Final Cut and Photoshop CS3 extended

Similar Messages

Maybe you are looking for