Final cut asks to buy compressor though it's installed with Logic Pro

hello,
how can I tell Final Cut that there is a version of Compressor on my mac? thanks, grts, Lucaz

So, uh, lucaz...a compressor in Logic Pro is for audio signals. Totally differnt animal. Very worthwhile, but not going to collaborrate with Logic Pro in any way that I think you're looking for.

Similar Messages

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. Whne I try to export to it aI am told I must go to i-apps and buy compressor.

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. When I try to export to it aI am told I must go to i-apps and buy compressor.

No, FCP X will only work with Compressor 4.

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? i´m from Mexico i speak spanish

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? how i can install this app in Final Cut? this app cost me money and not is working to me, i am disappointed sorry if a write bad, i´m from Mexico i speak spanish

This is a user2user board for FCPX - maybe better you discuss your issues with the makers of that 'plug in'
Seems for me a bit 'fishy', isn't it? - other professional plug-in makers deliver with an installer... That advice at AppStore, how to install it, is ... rare:
How install it ? – click the launch button. Motion 5 will start itself. When Motion is open click save as. Write a generator name - Lens Flare and choose category RGB HOUSE or make it. Click Publish and you are done. If you don’t have Motion 5 look at support site - how to install in FCP.
How it works ? – In Final Cut Pro you will find in Generators RGB HOUSE group, where will be Lens Flare. Drag this generator above all clips in timeline. When it’s there remember to change blending mode to Screen (in video section). You can adjust color, steak color, glow, intensity, scale - apacity and blur of artifacts, position. Any parameter could be stored as a keyframe, so You can easily animate the flare.
so, I don't speak Spanish, lets have some fun with translate.google...:
Cómo instalarlo? - Haga clic en el botón de inicio. Motion 5 comenzará Misma. Cuando el movimiento está abierto clic en Guardar como escribir un generador de nombres -. Resplandor del objetivo y seleccionar categoría RGB CASA o hacerlo. Haga clic en Publicar y ya está. Si usted no tiene el movimiento 5 vistazo a sitio de soporte - cómo instalar en FCP.
Cómo funciona? - En Final Cut Pro se encuentra en el grupo generador RGB CASA, donde serán destello de lente. Arrastre este generador por encima de todos los clips en la línea de tiempo. Cuando es allí te acuerdas de que cambiar el modo de fusión a la pantalla (en la sección de vídeo). Usted puede ajustar el color, color carne, brillo, intensidad, escala - falta de definición apacidad y artefactos de su posición. Cualquier parámetro podría almacenarse como un fotograma clave, por lo que puede animar fácilmente la antorcha.
Hope it makes at last a little sense... I don't trust these automatic translators
(the German translation is ... awesome funny!)
Finally: it's from 2012! Needs probably an update - contact the dealer!

Final Cut Suite 1 and Snow Leapard - Can't install

Final Cut Suite 1 and Snow Leopard - Can't install
"Your computer doesn't have the required hardware to run this software, see Read Me for details."
I take a look at the 'Before You Install' file, since there is no 'read me' file and it's hardware requirements are basically ancient for what this computer has.
I assumed that Final Cut Suite 1 was simply too old for Snow Leapard, but my searches are not hitting in Goggle or here at the FCP Forums.
Any ideas would be great, thanks for your time!
-Monty

What is the Final Cut Pro version included in your Studio 1 suite?
If it is a 5.0.x version, then it is Power PC only. That version will install on an Intel based Mac but exhibit some odd quirks. In short, it was incompatible to start with.
A 5.1.x version should [at least in theory|http://snowleopard.wikidot.com>, work without problems.

Mac Pro for Final Cut Studio -- The Buying Guide

I am starting to think about upgrading my "old" Power Mac G5 Quad system to a Mac Pro system. As you might expect, this raises several issues.
What I do: I edit DV and HDV on FCS2. My specs are below. I am looking for the best speed (especially for rendering), stability and video quality I can afford (between $5,000 and $6,000).
Question 1: Is it true that Snow Leopard and FCP 7 are about a year away? If so, please assume for the following questions that I would be working with the full complement of FCS2 applications on the Leopard OS. (How worth waiting for do you think these are?)
Question 2: Without directing me to the various benchmark and testing sites (which I’ve already looked at), can you suggest the actual performance differences I would see (again, using the whole range of FCS2 apps) in the following:
Two 2.26GHz Quad-Core Intel Xeon processors
Two 2.66GHz Quad-Core Intel Xeon processors
Question 3: I have heard that (with the exception of Compressor) FCS can only use a maximum of 4GB of RAM, and that the 6GB that the Mac Pro ships with are already more than it can use. Is this true? Is it true that Snow Leopard would allow FCS to make greater use of more RAM? And would this show up in the programs’ performance?
Question 4: To get the best video performance with my various FCS2 applications, is there a significant quality improvement in moving up from the NVIDIA GeForce GT 120 512MB to one of the other video cards? How would I notice a difference in the quality?
Question 5: Are there any other purchasing considerations I should think about when configuring a new Mac Pro?
Thanks a lot.
Giraut

Well, well, well, you make me think more about my last upgrade of an ATI Radeon 2600 to the latest ATI Radeon HD 4870!
I was looking on the Final Cut Pro thread to find one answer and look what I found, your questions!
Since yesterday night I was seeking the Apple Support threads just for fun and I now have doubts.
I am a Mac Pro (earlier 2008) owner. I upgraded it to 4 x 1.5 Tb Seagate hard drives and 10G of RAM from OWC (Other Word Computing). First let me tell you NOT to buy from Apple Store for your hard drive and/or memory upgrade. They are totally out of price list. I got my Mac Pro first with one 500 Gb Seagate drive. Then I added 2 x 500 Gb hard drives from Apple. I payed them 199,00 $ each
Last September, I upgraded the drive bays with 4 x 1.5 Tb from OWC. I paid them 229.00 $ each!
199,00 $ for 500 Gb or 229,00 $ for 1.5 Tb (that"s 3 times 500 Gb) which one would you take? And we are talking about two models from Seagate running at 7200 RPM, with 32 Mb of buffer.
I mean... What is that?!!?
And the memory! Don't even think about it.
I got first 4GB Matched Set (2 x 2GB) for 147,99 $ in September from OWC and my second order was 4GB Matched Set (2 x 2GB) for 132,79 $ in October.
I payed a total of 280,78 $ for 8GB of RAM while the price for this upgrade on Apple Store woul have cost me 1998,00 $
*+Source Apple Store :+*
*+Apple Memory Module 4GB 800MHz DDR2 FB-DIMM ECC 2x2GB $999.00+*
Multiply that by 2!
Now how much memory would you need?
I am not a Final Cut Pro user, but I use Final Cut Express a lot, with animation QuickTime movies exported from my Astronomy software Starry Night Pro Plus.
Yesterday I posted this into a thread to answer a user :
+Every morning I have my preferred applications started: Mail, Safari, iTune, Aperture and Final Cut Express. I just did a test for you. I started Mail, Safari, Aperture, Final Cut Express, Starry Night Pro Plus (OpenGL Astronomy Software), Terminal, Quicktime, TextEdit and NeoOffice.+
+With all these apps running, I still have 6.48G of Free RAM out from the 10G installed!+
+It's when I start hungry applications like VMWare Fusion running Windows XP, or Quicktime with a lot of movies opened that I could see the memory level going low!+
+Your bottle neck in video editing will probably be the video card, after the disk speed. Be sure to use 7200 RPM disk and eSATA for your video plans if possible. Firewire 800 will works fine on external drive but it could giggle. I had an ATI Radeon HD 2600 that I recently upgraded to an ATI Radeon HD 4870. the drivers aren't ready yet from Apple. We are all waiting for the next OS X release 10.5.7 for the drivers! For now, I am running on Beta drivers.+
+It's hard to say by now if I have better performance into Final Cut Express because the movie I was working on was an animation movie using plans exported from Starry Night Pro Plus via Quicktime and "animation" codec without any compression. As soon as I make a modification, I still have to render the output for smooth playing.+
Now, after some test with Starry Night Pro Plus this morning, I can safety say that Starry Night Pro Plus with Open GL does use my video card extra speed and that my experience navigating into the Universe is much better and smooth.
But honestly, even if I have to admit that I am using the Beta drivers for the HD 4870, I must say that I have very big doubt that Final Cut Express does use the extra power of the HD 4870 compare to the HD 2600!
In fact, I am searching the support thread for this answer.
Does anyone can say if Final Cut Express or Final Cut Pro does make use of the extra hardware feature of the ATI Radeon HD 4870 or not?

Final Cut asks for Serial Number every time I open it.

A couple months ago I upgraded to Final Cut Studio 2 on my iMac. Since then, every time I open up any applications I get prompted to type in my serial number. I've resulted to keeping my serial number on my desktop for easy access, but it's still really annoying. Any ideas?

This is just a thought...I don't know the answer from experience. Perhaps your user account doesn't have privileges to write the file to wherever FCS wants to store the Serial #. Once it's written on your computer, it's should work from any user account.
Does the user account you're entering the serial number from have administrative privileges? If not, then try logging into your administrator account (or temporarily give your user account the privileges) and enter the serial number there.

Final Cut Studio 5.0.4 Upgrade to Final Cut Studio 2 HD Crash now needing to install on laptop

I had Final Cut Studio 5.0.4 on my laptop which I upgraded to Final Cut Studio 2 during the 12 month period when it was offered at a reduced price. My old G5 Hard Drive has bit the dust and I am trying to install on my laptop. I have successfully re-installed upto 5.0.4 including the troublesome compressor 2.0.1 and Qmaster 2.0.1. There are no further updates apparently when my laptop scans for any. I am running OSX 10.5.8. Now when I put the disks in for the Studio 2 all FCP, Motion, Soundtrack Pro, Compressor, DVD Studio Pro, Apple Qmaster, Live Type and Cinema tools are all grayed out, saying they need to be upgraded first. I am guessing it is because this 12 month deal is no longer available. Does anyone know a work around for this? I paid $499 for this upgrade and I cant re-install it?
My laptop is 2.4 GHz Intel Core Duo, 2 GB 667 MHz DDR2 SD RAM, small for FCP but I don't keep files on there.
Any help would be appreciated.
jennymanning

why did you install FCP 5 when you are going to install FCS 2? FCS 2 upgrade installer does not need FCP 5 installed and therefore you dont need updates as you will be installing a newer version of FCP.
During the installation process of FCS 2 it should ask for the serial number of FCP 5 then ask for the upgrade serial number for FCS 2. You must have both of these or it wont install.
Check this spec for FCS 2 with your laptop to see if it is compatible, if the machine is not compatible, it wont install.
Final Cut Studio 2 Spec

Running adobe captivate keeps asking for flash even though its already installed

running adobe captivate keeps asking for flash even though its already installed

iTunes will ask you to enter your password when buying songs for each browsing "session". This wouldn't explain why you are being asked to enter it every 3 minutes though.
I would suggest logging out of your Apple ID on iTunes and logging back in. Also, you may verify that your computer is "Authorized" for use with your iTunes content.
To do this on a Mac, go to the "Store" tab at the top of the screen and click "Authorize this Computer"

Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
I hope this will work for you.
DM

Final Cut Pro X conflicting with Logic Pro 9

As soon as I installed Logic Pro 9, Final Cut Pro X keeps freezing. It launches normally, as soon I play an item from the event browser FCPX freezes.
Anyone knows how to solve that?
Thanks in advance

Hi Kolbi,
I have just experienced a similar problem: I recently performed a complete reinstall of my system and throught I would keep it simple by just running FCPX and LP9 (installed in that order). Unfortunately I found (yesterday) that FCPX behaves erratically. Have you found a way to solve your problem? If so please let me know.

Final cut pro 5 with logic pro 7

Does anyone know if running final cut on the same computer as logic messes up logic at all. Since installing final cut i have had unbelievable problems with logic. When i open up a project, almost everything in it has changed, the time signiture seems to be different with every track. The most annoying problem is the audio tracks have actually changed key slightly, how on earth is this possible? I really need help.

A different time signature on each track? Wow. Consider yourself lucky with that. I have been requesting that feature for over a decade.
As far as FCP and LP7 residing on the same machine... I have had FCP and LP on the same machines (G5s) for years and running very smoothly.
The day I can line up 11/8, 23/32, 99/64 and 19/16 without employing over-the-barline phrases will be really, really great.

Just purchased Final cut Studio, but DVD drive wont boot the install disk

I really need some help. I have an older G5 2.0 with 6 gigs of ram, and about 500mb of hardrive. Im running OS X 10.4.9. I just purchased FCStudio HD, but cant get the install disk to boot. My computer doesnt even read it. Am I doing something wrong? Is there some setting I should change?
G5 Mac OS X (10.4.9) My First Mac

I'm sure your drive size is a typo. You'll need a much larger drive if it's accurate.
Some install DVDs are unreadable and must be replaced.
But some older G4s and G5s had optical drives that could not play some newer DVDs. I can't tell you much more than that, I don't recall the details and the topic hasn't come up for many months. Try searching the forum?
Hope you're going to NAB, take some of the FCP classes.
bogiesan

Final cut studio 3, quicktime pro

just installed final cut studio on new laptop.
i thought it came with quicktime pro, but can only find quicktime.
does that mean another $29 investment?
if it's there, where can i find it?
many thanks,
berniej

I found this thread after having the same problem. I went through the steps suggested, but it didn't help me. I still have the regular QT instead of the Pro version. Any thoughts?

Final Cut Server and Compressor / Qmaster serial conflict

On my Final Cut Server machine, i have Final Cut Server version 1.1.1. On my Mac Pro i have Final Cut Studio 7. I have installed Compressor and Qmaster on my Final Cut Server from the Final Cut Pro DVD, so i can use Qmaster (the version of Qmaster must match exactly on all machines). But the two serials conflict, Final Cut Server will not start due to the following problem:
"Either the current serial number is not valid or there is another server using the same serial number.
Check the serial number and then stop and start the server using the Final Cut Server Preferences panel."
Of course both serials is completely legit. Is it really true that i either need to downgrade Compressor and Qmaster (FCS will work, but Qmaster will not) or buy FCS 1.5? I have paid lots of money for this setup already, it can't be true that i am forced to update to 1.5.
Please Apple, a solution?

I have a similar case. Maybe someone knows how to solve it:
We installed Final Cut Server and on the same MacPro we installed Final Cut Studio.
After a while we dedicated this machine to Final Cut server and used the Final Cut Studio license on another nachine.
Now, if I want to change or add a transcode setting in the compressor, I'm getting the error message: 'conflicting serialnumber' or something like it.
So compressor thinks it's still part of th FinalCutStudio installation. But I don't quite understand, because Final Cut Server has its own compressor, isn't it?
How can I solve this without loosing the custom transcode settings I've made in compressor.

Final Cut Pro generated an error / unexpectedly Quit w/compressor & Qmaster

Hello all I have Final Cut Studio 3. I am using the latest Final Cut and the latest compressor.
I have a Core i7 so i am trying to use all 8 virtual threads or at least four. However when I use the "This Computer" option in compressor it is not an issue. It will compress fine. However, when i use the virtual cluster i set up with QMaster i get the dreaded "Final Cut Pro generated an error or unexpectedly" and it fails. I am unsure what to do. Here are the circumstances:
When I to compressor from FCP and use "this computer" it is no problem.
When I send to compressor from FCP and try to use your personalized cluster (taking advantage of those expensive cores!) it won't work. it fails and give me the aforementioned error.
PS I know that I can make the file quick time self contained movie fm final cut and send it to compressor, but this program should work on it own without doing that.
I have enclosed a video which can be seen at:
http://www.youtube.com/watch?v=PYfvPvKI1Uk
http://www.youtube.com/watch?v=ZyKsw8ii5Ig

irtual Clustering works by launching multiple copies of the Compressor encoder, each of which needs access to the source media that you are compressing. This is fine if you are compressing from a source movie clip, as they can just open the file multiple times.
But when you export from Final Cut Pro, FCP can only communicate with one copy of the encoder - it cannot launch multiple copies of itself. Consequently, you cannot export to a virtual cluster from the Send to Compressor command.
A common misconception is that exporting to a QuickTime movie is slower. This is wrong - it is actually faster for two reasons - 1) it is faster to read the file directly than to request each frame from FCP and 2) you have access to virtual clustering. If your timeline is completely or partially rendered, deselect Make Self-Contained and the QuickTime export will be quicker.
Another issue is that you are using up all of your virtual cores, leaving nothing left over for the operating system. There are varying schools of thought on how many to choose, ranging from the total number of cores minus one to half the number of cores (the latter being Apple's official suggestion). Also remember that each instance requires at least 1 GB of RAM, and remember to leave some extra for the OS and running applications.

Final cut asks to buy compressor though it's installed with Logic Pro

Similar Messages

Maybe you are looking for