Final Cut Erro

Everytime I try to do anything with Final Cut now, I keep seeing the canvas go straight to red with white lettering in the middle saying "Out of Memory. Free up memory and window will redraw." This even happens for simple projects and tasks. In fact sometimes I cannot open a sequence as it says out of memory error. I wonder if I have bad RAM?
My scratch disk with all media has 800GB free so that's not a problem. My boot drive has 55GB free so that's not a problem. And my autosave vault drive has 40GB free. I have 4.5GB of RAM...and have been using this system with no problems for almost 3 years now editing HDV material...now I can't do anything practically.
Anyone?

You might try trashing your preferences...link for FCP Rescue below:
http://fcprescue.andersholck.com/
Repair Disk Permissions (go to Applications>Utilities>Disk Utilities)
Re-Boot computer
Then see if it clears things up

Similar Messages

  • Mini-Dvi to Video out from Final Cut Pro working

    Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
    It's working fine.

    @ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
    @ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
    My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

  • I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

    I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
    Here is the crash report:
    Interval Since Last Panic Report:  5426204 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
    Wed Mar 20 11:36:53 2013
    panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81eb0eb950 : 0xffffff801aa1d626
    0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
    0xffffff81eb0eba00 : 0xffffff801aa435d2
    0xffffff81eb0ebae0 : 0xffffff801aa663f7
    0xffffff81eb0ebb20 : 0xffffff801aa67398
    0xffffff81eb0ebc70 : 0xffffff801aa6887c
    0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
    0xffffff81eb0ebf50 : 0xffffff801ade182a
    0xffffff81eb0ebfb0 : 0xffffff801aaced33
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000001a800000
    Kernel text base: 0xffffff801aa00000
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 1070542822
    last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
    loaded kexts:
    at.obdev.nke.LittleSnitch    3908
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AirPort.Atheros40    600.70.23
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AppleUSBUHCI    5.2.5
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

    There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
    The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
    I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
    http://eshop.macsales.com/shop/apple/memory/iMac
    http://www.crucial.com/

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • How to use Final Cut Pro with multiple user accounts?

    Hi,
    I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
    Also, I want my DropBox account to back-up my media. Any tips?

    I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
    But I agree on your comment about DropBox. It would have been the perfect solution though.
    What else is there?
    I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk.

  • I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

    I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
    Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

    1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
    2. What's the media 16:9 or 4:3?

  • HT4722 How many computers can you install Final Cut on

    How many computers can you install Final Cut on with one license or purchase?

    This is an excerpt from the FCPX license, available here.
    http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
    2. Permitted License Uses and Restrictions.
    A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
    to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
    (ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
    Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

  • Final Cut Studio 2: Requirements and Recommendations

    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b

    SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b
    Message was edited by: Rinaldo

  • Small Office Network Solution for Final Cut Server - Proxy Storage Etc.

    Hi,
    I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most effective way, however we are a non-profit organization, so we are working with a limited budget.
    My question is, does anyone know of any networking solutions for Proxy Storage and Media storage, that wont bottleneck, but is not as high budget/high tech as using an Xserve/XSan system?
    Right now we would be looking at running Final Cut Server off of our 24inch Intel IMac (Going to beef up the RAM). We have a Gigabit Switch, 4 more intel machines running final Cut pro, and a direct attached Drobo for Media Storage. I know this is not an Ideal set-up, but it's what I have to work with right now. So, I'm looking for any kinds of tips and tricks to make this set-up work for us, and am looking at purchasing either a Network Attached or iscsI storage system for the Proxy Storage.
    I hope this is a decent description of my situation, and would love some advice.
    Thanks Very Much,
    MacNomad

    Hi,
    I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most effective way, however we are a non-profit organization, so we are working with a limited budget.
    My question is, does anyone know of any networking solutions for Proxy Storage and Media storage, that wont bottleneck, but is not as high budget/high tech as using an Xserve/XSan system?
    Right now we would be looking at running Final Cut Server off of our 24inch Intel IMac (Going to beef up the RAM). We have a Gigabit Switch, 4 more intel machines running final Cut pro, and a direct attached Drobo for Media Storage. I know this is not an Ideal set-up, but it's what I have to work with right now. So, I'm looking for any kinds of tips and tricks to make this set-up work for us, and am looking at purchasing either a Network Attached or iscsI storage system for the Proxy Storage.
    I hope this is a decent description of my situation, and would love some advice.
    Thanks Very Much,
    MacNomad

  • My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

    My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
    The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
    I've run out of ideas. Help would be very much appreciated. Thanks.

    have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy....   google...." fcpx time machine problem"  Frist page link 
    http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
           You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
    booya!

  • What's wrong with my Final Cut Pro 7.03?

    What's wrong with my Final Cut Pro 7.03?
    I have just started up a new project.
    Every time I try to ad a clip in top of each other a "general error" shows up. The sequence viewer turned red and it displays that I have to close and reopen the window to restore.
    The only "new thing" I do - is the use/brand of camera.
    Now I use the canon D5 mark 3 for my project (before D5 mark 2)
    What's wrong??? Do I need to update my Final Cut Pro 7.0.3 And how do I do this???
    Final Cut Pro 7, Mac OS X (10.6.8)

    Did you use Log & Import?  Or did you at least convert the D5 files before importing?  FCP doesn't work with those files natively.
    -DH

  • How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

    How do I get a folder to open up in Final Cut Pro version 6.  I'm on a MAC OS X Version 10.6.8.  The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive.   When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found.  Unable to import this file."   When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file".  What should I do or what am I not doing? 
    Cliff

    YYou should ask this question on the Final Cut Studio forum.

  • Unable to capture from the Panasonic AJ-HD1400 deck into Final Cut

    I am working on a project where I need to use the Panasonic AJ-HD1400 deck and import 720p footage from the Vericam into final cut. I am able to connect to the deck via firewire but when I playback footage or try to capture I get a black screen and error message saying that FCP isn't getting a video signal.
    I have tried multiple capture and sequence settings, none of which have worked. The one I have read that I am suppose to use is the easy set up for DVCPRO HD 720p24.
    The footage is shot from the Panasonic Vericam which shoots at 60 fps. The footage has been flagged both 24p and 60p during different takes. - Which I have read you are suppose to convert using the DVC PRO HD Frame Rate Converter after it has been imported.
    Anyone out there know how to solve this issue,
    -Steller

    Have you tried trashing your prefs?

  • How do I capture HDV in Final Cut Pro 6.0.6 from a Sony HDR-CX360?

    Hi. I recently upgraded to a Sony HDR-CX360 Camera. I've been importing off of Firewire with my older cameras. Now I face only being able to import with USB. It is not recognizing the camera. How do I import with this kind of camera and Final Cut Pro 6.0.6.? It works fine with iMovie.

    Hi,
    There are a couple of things I would do in your position .. first off make sure the camera is turned on and connected BEFORE I start FCP. another would be to run up system profiler and have a look in FireWire - and see (obviously with the camera connected) is it listed in there .. If not in effect the MAC is not seeing the camera and Failing that if it is a six pin on the camera connect to a six pin port .. I had issues with a Camera (Canon XHA1s) which the MAC Pro FireWire (8 pin) would not list the camera until I installed an two port 6 pin FireWire card .. It works every time now. Hope you get it sorted ..
    Jim

  • Can not get Final Cut pro to capture HD footage from Canon HV10

    Ive had soo much trouble with no success, in trying to get footage from my HD camera into Fina cut Pro HD 4.5. I can get normal dv footage when i cahnge the setting s on the camera, and Final cut pro, but HD is not been possible so far.If any one can inform me of anything, is it possible at all to capture from my camera in HD, do i need Final Cut Pro 5? Do i need pluggins? Anything!! I want to capture HD quality!
    Powerbook G4   Mac OS X (10.4.9)   1.5GB MEMORY

    You need to list the camera you are using, the settings you shot on and the settings on your sequence (easy set up etc)

Maybe you are looking for