Final Cut Export DVCPRO HD720p uncompressed/hi-res for tape and projection

Well I've been through the many suggestions found throughout the forum and have tried many combinations of exporting options, timeline options and codecs and still for the life of me can't find the one that works. Please offer any advice you can.
Objective:
Export a 30 minute film with a DVCPro HD 720p60 timeline shot in 720p 23.98fps as uncompressed and as high resolution as possible for transfer to a Beta-SP for big screen projection.
In trying the Uncompressed 8 and 10 bit exports the film's video became jumpy and some color's over saturated to the point of pixelation (is that a word?). I've created new Uncompressed timelines and exported from there as well to the same over saturated/pixel effect.
Is just an export of a Quicktime movie with current settings and then use compressor with "DVDPRO HD 720p60" my best options? I've tried that too but not happy with the softness of some of it and as we're projecting BIG, I want to have the best resolution possible.
Oh - and this time - size does NOT matter.
Thanks for any pointers.

What I mean is - how to create then a Quicktime someone without Final Cut can play. Exporting as a self-contained Quicktime movie does not seem to creat the stand alone file I may need. Any tips?

Similar Messages

I have a problem with Final Cut Pro, I can't find my existing events and project anymore!

Can give somebody me how I can solve this problem?

Can we asssume that you upgraded to 10.1 and created those projects and events in an earlier version of FCP X?
Or is there more to the story?
Russ

I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report:          2
Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch    3908
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AirPort.Atheros40    600.70.23
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

My final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

You would need an image editor to edit the images and add a border to the image first before importing them into Final Cut.
Cheapest and very good image editor?
PIxelmator.
Located in the Mac App Store. $14.99 USD.
Here is the Pixelmator website to give you an overview of the app.
http://www.pixelmator.com/
Good Luck!

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

Final Cut Pro X to edit audio programs, for instance an audio podcast?

I am a trial user: Can I use Final Cut Pro X to edit audio programs, for instance an audio podcast?

You could, but GarageBand might be easier.

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size.
I don't understand why this is happening.

Quick follow up, since I was on my phone earlier and am back to a real keyboard.
To access Easy Setup, hit Control Q.
If you click on the blue discosure triangles, a dropdown menu with about a dozen different presets will be displayed. Select the one you want, (Here, I've selected 720P.)
Whatever you select for a preset will not be applied until you make a new sequence. (I don't like to have sequences with different properties in the same project so I prefer to make a new project if I change the Easy Setup.)
Because photo aspect ratios are different than video, I typically put a solid generator of some compatible color on the first track (v1) and put my photos on the track above (v2). Looks better, IMO, than black bars. There are other creative ways to display them. And of course, you could scale them up to fill the frame…but then you probably would have to re-position them.
Good luck.
Russ

HT5149 I purchased Final Cut Pro X App on the Apple App Store and was wondering how I also get it downloaded on my ipad#2-- AS WELL-.. I paid for FCPX and want it on both my Macbook Pro, and my iPad2, can i do this, if so how?

I purchased Final Cut Pro X App on the Apple App Store and was wondering how I also get it downloaded on my ipad#2AS WELL….. I paid for FCPX and want it on both my Macbook Pro, and my iPad2, can i do this, if so how?

There's no way FCP X will run on an iPad - sorry.
Look at the system requirements:
http://www.apple.com/finalcutpro/specs/
Andy

Final cut export high quality

I'd like to know what are the best compressions to export a full hd file from final cut pro,
for these cases:
1) best quality full hd ( but not completely uncompressed or too heavy) to show the video to clients on my computer.
2) best compromise quality/weight to put the video in my website. Do you suggest full hd or smaller?
Thanks a lot to everyone

I agree if you suggest h264 to have a good quality to display the video with Quicktime or Vlc. But unfortunately on other players ( pc ) these files have often many problems. For example my file 16.9 h264 that are well displayed in Quicktime in other players goes 4:3...
I'd like to have a really good qualitu file that I can give to anyone without any suggest to play it correctly.
Hmm
Also, for internet I'd like to have a file that anyone can see without downloading anything.
To see a Quicktime h264 video people need to have quicktime.
So I was thinking about flv files..

Warning: Sometimes Final Cut exports a non-drop sequence as drop-frame

Just a heads up. This has been maddening for me. On occasion I will export my program for compressor and it will be drop frame when it should be non-drop.
These are sequences which have exported fine before. There is no rhyme or reason to it. Tonight I've lost about 2 hours because of this. At least I knew to check it before compressing the file and sending it out to our contractor because it has happened in the past.
By the way shutting down FCP and opening it up again seems to cure the problem.

System req's for fcp 5
General System Requirements
Macintosh computer with 867MHz or faster PowerPC G4, PowerPC G5, Intel Core Duo processor, or Intel Xeon processor
HD features require 1GHz or faster single or dual processors (authoring HD DVDs requires a PowerPC G5, Intel Core Duo processor, or Intel Xeon processor)
512MB of RAM; 1GB of RAM for HD features (2GB recommended)
Display with 1024-by-768 (or higher) resolution
AGP Quartz Extreme or PCI Express graphics card (Final Cut Studio is not supported on systems using the Intel Extreme Graphics 950 GMA)
Motion requires the standard graphics card found in any Mac Pro, MacBook Pro, iMac Intel Core Duo, Power Mac G5, iMac G5, a 1.25 GHz or faster PowerBook G4, or a 1.25 GHz or faster flat-panel iMac.
Mac OS X 10.4.4 or later
QuickTime 7.0.4 or later
4GB of disk space to install all applications
Additional 42GB to install all optional templates, loops, content, and tutorials (may be installed on separate discs)
It would seem that you've been reasonably lucky thus far running 10.3.9

Final Cut Exporting to DVD Settings Help!

Hello, all. Hopefully someone can help me with this problem that I have been struggling with for weeks.
I shot a video project in standard definition on a Sony VX2000, then edited it in Final Cut Express. I am now wondering what the best export settings would be in order to put it onto a DVD, and maintain the quality at 100 percent. I've tried exporting it in several different ways, but no matter what I do, the quality is never as good as it was shot.
So, what should the export settings be from Final Cut? And do you think I need to use a different software to maintain perfect quality on a DVD?
Thanks so much

You need to ask this question on the FCE forum
Final Cut Express HD

Final Cut Export DVCPRO HD720p uncompressed/hi-res for tape and projection

Similar Messages

Maybe you are looking for